Deckenteleskope für Deckenmontage WäscheleinensystemeMit den Deckenteleskopen können Sie die Verbindungsschienen Ihres Wäscheleinensystems auf die passende Höhe von der Decke herunterhängen. Die Verbindungsschienen Dryfix und Krüger passen zu diesen Trägern.Die Deckenteleskope sind aus verchromtem Metall (längste Version: verzinkt) und bieten solide Stabilität und Tragkraft des Systems. Je nach Raumhöhe und gewünschter Höhe der Leinen stehen 4 Ausführungen zur Verfügung. Die Teleskope sind innerhalb der unten beschriebenen Massen in der Höhe passgenau verstellbar, wobei die Höhe nach Montage nicht mehr geändert werden kann:Länge 1: einstellbar 230-330mm ab DeckeLänge 2: einstellbar 400-600mm ab DeckeLänge 3: einstellbar 550-800mm ab DeckeLänge 4: einstellbar 750-1050mm ab DeckeBeispiel: der Raum ist 2.30m hoch, die Leinen sollen auf die Standardhöhe von 1.85m. Sie benötigen einen Abstand von 45 cm ab Decke. Das passende Teleskop in diesem Beispiel ist also Länge 2.Bitte beachten Sie, dass die Montage direkt auf die Betondecke die beste Stabilität ergibt. Falls die Decke isoliert ist, empfehlen wir aus Stabilitätsgründen, die Isolation auszuschneiden, die Träger direkt auf den Beton zu montieren und die Aussparungen anschliessend wieder zu verschliessen. Bei Montage auf die Isolation kann diese aufgrund des starken Seilzuges einbrechen.Ebenfalls zu beachten ist, dass in der Decke oft Leitungen verlegt sind. Eine Bohrtiefe von mehr als 3cm kann Strom- oder Wasserleitungen verletzen.

Learn more More Fewer

Distance rollers 3cm for bridging cables or lines. For mounting between wall and laundry line connection rails. Made of solid robust plastic, compatible with all connection rails from our program.  Technical dataLength: 30 mmOuter diameter: 25 mmDiameter hole: 10 mmMaterial / Color:   robust plastic, anthraciteWeight: 21 gr  

Learn more More Fewer

Control knob for humidity controller of Oasis dehumidifiers. Can be attached to hygrostat/humidity controller. Suitable for these models:Oasis 75Oasis 125Oasis Evolution 140Oasis D150Oasis OD165Oasis D165Oasis Evolution 220Oasis Evolution 270Krüger Airsec 75 / 75THKrüger Airsec 125 / 125THKrüger Airsec 165 / 165THKrüger Airsec 225 / 225THKrüger Airsec 265 / 265THRoth-Kippe Sonora 16Roth-Kippe Sonora 26Roth-Kippe Sonora 36Lubra FROM 125THLubra FROM 165THAxAir 125AxAir 165Only for newer models with attached rotary switch.not compatible with very old models with side, recessed control wheel).

Learn more More Fewer

Digital Socket Hygrostat Dryfix AC38The hygrostat plug was specifically developed for the control of dehumidifiers. It can be used with all dryers that resume operation after a power interruption with unchanged settings.The operation is very simple and intuitive:The plug is inserted into any household socket in the room, and the dryer is connected to the hygrostat plug. By pressing a button, the desired target humidity can now be set, which is the humidity level that the room should be maintained at. If the measured humidity is higher, the Aircontrol AC38 supplies power to the drying device; if the humidity is correct, the power is interrupted.Unlike conventional plugs of this type, the Dryfix Aircontrol not only focuses on purely moisture-based monitoring but also takes into account the technical aspects of a dehumidifier. This significantly saves electricity and protects the connected device from damage, for example, in case of too low ambient temperature or due to too rapid reactivation. Although most dehumidifiers already come with a built-in hygrostat (humidity meter), the Aircontrol AC38 still has advantages:• The measurement point for the room humidity is at the plug itself. Especially in larger rooms, the air is drier immediately near the device than in more distant areas of the room. If the plug is inserted a little away from the device, it ensures that the humidity is correct throughout the entire room.• If the dehumidifier is used for humidity control in two adjacent rooms, the device can be placed in one room and controlled with an extension cord from the second room, where the hygrometer plug is located. This ensures that the dryer runs until the humidity in the second room is also acceptable.• Power-saving function No. 1: When a dehumidifier turns off after reaching the target humidity, there is still residual moisture inside from the previous operation. This moisture accumulates in the housing and affects the measuring sensor inside to a certain extent. This means that the device restarts too quickly because the sensor itself measures the correct value, but is located in the wrong environment (inside the housing instead of in the room). Especially in digitally controlled devices (with a display), the sensors are usually placed directly on the cooling element, which is unfavorable. In mechanically controlled devices (with a dial for humidity control), the distortion is less, but still present. With the hygrostat plug, the room humidity is measured not in the device, but in the room. The value measured there is therefore more precise than when measured in the device. This saves electricity because the dryer switches on less frequently.• Power-saving function No. 2: a huge plus of the Aircontol38! When a dehumidifier starts to work, the compressor pumps refrigerant through the cooling pipes to make them cold, thus allowing the air to condense (=dehumidified). However, this process takes a few minutes until the cooling element reaches its optimal operating temperature and thus its effect. This also means that the dehumidifier consumes full power during this time but has not yet dehumidified. Most dehumidifiers therefore have a switching tolerance between the achieved target humidity and the subsequent reactivation of about 3-5%. For the aforementioned reason, it is more efficient to reduce by 5% at once than to constantly switch on and off at 1%. The lifespan of the compressor is also improved when the dryer has to switch on less frequently. Commercially available hygrometer plugs usually operate in a narrow, thus uneconomical switching mode of 1%. However, the Dryfix Aircontol38 adopts this switching tolerance of 3% and only switches back on when the measured humidity value has increased by 3%.Temperature protection: The second big advantage! Most dehumidifiers are suitable for ambient temperatures of 4-5°C to about 32-35°C. If the room gets too cold, an ice layer forms on the cooling element, which the dehumidifier can no longer defrost. As a result, an ice layer can grow, which can damage the device. The Aircontol 38, unlike conventional plugs, has a temperature protection feature that interrupts the power to the dehumidifier as soon as the room temperature is too cold for operation, falling to 4°C or colder.The entered values are automatically saved and remain valid after a power interruption. A backup battery is therefore not required for this model. How do I know if my dehumidifier is suitable?The Aircontol 38 can be used with all dryers that resume operation after a power interruption with unchanged settings, so generally for all dehumidifiers that are regulated with a rotary knob. It is not suitable for devices that go into "standby" mode after a power interruption. These are some electronically controlled devices, usually recognizable by the display. Whether a device is suitable or not can be tested very easily:"Turn on the device, then unplug it and plug it back in after 10 seconds. If the dehumidifier resumes operation automatically with unchanged settings, it is also compatible with this plug. If it goes into standby and needs to be restarted, the dryer is not suitable. The plug itself does exactly the same thing. It provides or interrupts power." Application:"To completely leave the humidity control to the hygrostat plug, the connected dehumidifier must be set to maximum operation, i.e., continuous operation (in some dehumidifiers also recognizable as "Continuous" or "CO"). In this position, the devices ignore the measured room humidity and run whenever the hygrostat plug provides power. Thus, the humidity is measured at the plug, not in the device."2 year guaranteeShipping costs for 1 item: Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical data   Voltage: 220-240 V / 50Hzcurrent load max.: 10AMesssensor : 103AT, C10-M53RAmbient temperature: 0 – +50 °CAmbient humidity: 5 – 95% r.H.Selectable target humidity: 30 – 90% r.H.  

Learn more More Fewer

This extremely powerful dehumidifier is specifically designed for demanding dehumidification tasks, such as the rapid drying of water damage, effective construction drying in large or heavily damp rooms, as well as the gentle drying of herbs. Due to its high performance, this dryer is available exclusively with a hose connection, making the use of a water container unnecessary and allowing for continuous operation.The dryer is to be set up freestanding in the room, with the clearly arranged control panel and the intake area for the humid room air positioned at the front of the device for easy access. The generated dry air is distributed widely in the room with high volume and strong airflow through the side outlet to ensure efficient and uniform dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier.SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.condensationThe condensate is drained directly through a hose into a lower-lying drain. The dryer does not have a bucket. A hose piece of about one meter is included in the delivery.Temperature protectionIf the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal. dehumidification performanceThe dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 90.0 Liters / 24h (1080W)27°C / 60% r.H. = 50.0 Liters / 24h (920W)20°C / 80% r.H. = 45.0 liters / 24h20°C / 60% r.H. = 27.0 Liters / 24h10°C / 60% r.H. = 13.0 Liters / 24h(r.H.=relative humidity)    Characteristics• Dehumidification capacity of up to 90 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Memory function for storing data and for automatic resumption of operation after power interruption• Clear display including current humidity, target humidity, and status overview• Equipped with a high-efficiency rotary compressor (Rotary Compressor)• Automatic professional defrost function• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)• Powder-coated metal housing/ metal bracket• Very easy mobility due to transport handles and 2 large and 2 smaller running wheels• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required)• Swiss plug 230 V • CFC-free and compliance with WEEE standards, CE, REACH, GS, and RoHS certified.• Environmentally friendly refrigerant R290Examples of useDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.  Technical data   Tension 220-240V / 50Hz Power consumption max. 1080W (4.8A) Sound pressure level 1 m distance 62 dB(A)2.5m distance 59 dB(A)(our measurement) dehumidification performance max. 90 liters/24h (30°C / 80% r.H.)  Recirculation air volume 850 m³/h (free-blowing) Condensation tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R290 (GWP: 3) Dimensions (H x W x D)  1010 x 584 x 575 mm Weight 54 Kg Operational cessation per key press / digital display Ambient temperature 5°C ~ 35°C Area of application Rooms from min. 14m² to max. 230m² (650m³) Swiss plug Yes   hose connection Yes operating hour meter No Guarantee 2 years

Learn more More Fewer

By using the Dryfix drying granules "Home" or "Pro", a gel is created that can be easily and quickly re-liquefied with this powder. Sprinkle it over the formed gel after completing the work. After approximately 5 minutes, it transforms back into water.  Advantages • No disposal of the gel necessary• Saves time• Simple application• Safe for the environment   Application example after flat roof renovation or application in the interior or household   1. Sweep the gel formed by the application of Dryfix granulate and fill it into a kettle. 2. Sprinkle some "Flu" granulate onto the gel and stir. 3. Reapply as needed 4. Pour away water            Application example for pipes, lines, or toilets   1. Sprinkle some "Flu" granulate directly onto the gel formed by the application of Dryfix granulate and stir. 2. Rinse with water        Important in flat roof renovation The "Flu" should not be applied in strong sunlight, as the heat generated can damage the top bitumen layer. This is especially true if the powder remains for an extended period. In this case, we recommend not to liquefy the drying granulate directly on the roof, but to collect it in a bucket and liquefy it there. Alternatively, the drying granulate can also be disposed of in a waste bag.  

Learn more More Fewer

High-quality floor fan made of robust metal and the rotors (50 cm diameter) made of aluminum. The fan head can be tilted vertically, allowing the airflow to be directed in any desired direction. The device has three speed settings, a practical carrying handle, and a good price-performance ratio.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Large fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's direction of airflow is horizontally adjustable without steps.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance engine• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.70 m length, Swiss plug• No assembly required, the fan is ready to use immediately.• Comparatively quiet operation• RoHS and CE compliant Technical data  Power consumption 120 Watts max. Rotordurchmesser 50 cm airflow Up to 9000 m³/h air speed max. 4.25 m/s Noise (our measurement): 1 m distance Step 1-3: 62-66 dB(A)2.5 m distance step 1-3: 59-63 dB(A) speed levels 3 Cable length approx. 1.70 m Connection Swiss plug 230V 3-pole (standard household socket) Dimensions ( W x H x D ) 58.5 x 57 x 19 cm Weight 6kg scope of delivery plug-in fan, no assembly required guarantee 2 years Documents / Downloads   User Manual DE - FR - IT - EN

Learn more More Fewer

Top Preis/LeistungDer "H2000 professional" ist ein kompakter 2 kW Heizlüfter, der an handelsübliche Haushaltsteckdosen 230 V angeschlossen werden kann. Ideal für das Beheizen von Räumen bis ca. 20m² auf Baustellen, aber auch für privaten Gebrauch. Das Gehäuse besteht aus robustem Metall mit praktischem Tragegriff, wobei der röhrenförmige Luftkanal die Wurfweite gegenüber rechteckigen Heizungen erhöht. Am Gerät ist ein Kabel von ca. 1.6m Länge sowie ein dreipoliger Schweizer Stecker angebracht. Bei Bedarf können passende Verlängerungskabel in verschiedenen Längen dazu bestellt werden.Ein weiterer wichtiger Vorteil dieser Heizung ist auch die Position der Steuerung, welche unten am Gerät statt wie üblich oben platziert ist. Das schützt die Steuerung bei Betriebsende vor aufsteigender Restwärme und somit vor Überhitzung der Elektronik. Dadurch werden die Lebensdauer der Heizung verlängert und Betriebsstörungen vermieden.Mit dem Funktionsschalter kann der Modus wahlweise auf reine Umluft oder Heizbetrieb gestellt werden. Ein stufenloser Raumthermostat hält die Temperatur auf dem eingestellten Wert. Bei Erreichen der gewünschten Temperatur schaltet die Heizung aus, während der Ventilator weiterläuft um stets den korrekten Temperaturwert des Raumes zu messen.Ausführung dieses Heizgebläses• Robustes Metallgehäuse• Tragegriffe• Raumthermostat• Sicherheitsthermostat, schützt vor Überhitzung• Inkl. 1.6 m Anschlusskabel• Inkl. Kabel und CH-Stecker 230V,Lieferumfang• Steckerfertiges Gerät• Tragegriff mit zwei Schrauben (kann bei Bedarf sehr einfach montiert werden)• Kabel ca. 1.60m / Q1.0mm² + Schweizerstecker T12 (3 polig, passt an eine normale Haushaltsteckdose)     Wieviel Wärme brauche ich?   Unser kostenloser Wärmebedarfsrechner hilft Ihnen, die benötigte Heizleistung für Ihre Räume zu ermitteln. Hier geht's zum Online-Rechner: Wärmebedarf berechnen   Technische Daten  Leistung 2 kW Luftvolumenstrom 291 m³/h Raumthermostat 4 – 40 °C Masse (HxBxT) 275x195x210 mm Gewicht 2.9 kg Stromaufnahme 8.6 A max. Netzanschluss 230 V / 50Hz Anschlusskabel 1.6 m Stecker 230V, 3 polig (= normale Haushaltsteckdose) Schutzart IP44 Überhitzungsschutz bei 55°C Sicherheitszertifikate    CE / LVD / EMC / RoHS / Erp Thermostat stufenlos 2 Stufen 30 W (nur Umluft) und 2 kW Heizbetrieb

Learn more More Fewer

Top Price / PerformanceA compact, powerful 9 kW heater fan for heating construction sites and industrial rooms. It features a robust metal housing with a practical carrying handle. The device is equipped with a cable of approximately 1.4m in length and a CEE16A plug (high current). If needed, suitable extension cables in various lengths can be ordered.The "H9000 professional" impresses compared to conventional heaters in this category in various respects:• He is smaller and lighter, but no less robust and of high quality.• The tube shape better concentrates the air, achieving a higher air speed and thus a greater throwing distance of the warm air stream into the room.• Control at the bottom instead of at the top of the housing: This protects the control at the end of operation from rising residual heat and thus from overheating of the electronics. This extends the lifespan of the heating and prevents operational disruptions.- Removable feet: the heater can also be easily screwed onto a wall console if it is to have a fixed place.With the function switch, the device can be set to 4500 or 9000 W heating power or used only as a fan. A room thermostat maintains the temperature at the set value. When the desired temperature is reached, the heating turns off while the fan continues to run to always measure the correct temperature value of the room.These heaters are excellent for use in garages, workshops, storage rooms, retail stores, greenhouses, sports and factory halls, as well as for various other applications. Execution of this heating blower • Robust metal housing• Carrying handles• Room thermostat• Safety thermostat, protects against overheating• Including cable and plug scope of delivery • Plug-and-play device• Carrying handle with two screws (can be very easily mounted if needed)• Cable approx. 1.40 m / Q2.5 mm² + CEE plug 5-pole 16 A (red/round plug, complies with Swiss standard) How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data    Heating capacity: 9 kW Stages: only recirculation 55 W / 4.5 kW / 9 kW Air volume: 701 m³/h Air speed: 6.4 m / sec. (our measurement) Room thermostat: stepless 4-40 °C Sound level: 63 dB(A) at a distance of 2.5 m Dimensions (H x W x D): 370 x 250 x 370 mm Weight: 6.4 kg Input max.: 12.4 A Connection: 400V / 50Hz Cable / Plug: approx. 1.4 m Q2.5 mm + EURO CEE16A Test certificates: CE / LVD / EMC / RoHS / Erp Protection class: IP44 automatic overheating protection at 60 °C

Learn more More Fewer

DRYFIX absorbs moisture up to 200 times its own volume within minutes and transforms it into a solid gel. This allows spilled liquids to be quickly and efficiently absorbed. The practical helper in the household for textiles, floors, and furniture. Application examples in the household"Binds spilled liquids, such as knocked-over drinks like red wine or water, but also animal urine or vomit."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc. Odors are also trapped and largely absorbed.Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).     Simple application The powder is sprinkled directly into the standing water or on the damp areas. In doing so, it absorbs moisture down to the pores and forms a compact (environmentally friendly) gel, which also encapsulates odors and small particles such as small glass shards. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."   Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc. Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: Seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer