This powerful dehumidifier is designed to tackle demanding dehumidification tasks, making it ideal for use in water damage situations, for construction drying in large or heavily damp spaces, as well as for drying herbs.
The dryer is positioned freestanding in the room for operation. The intuitive control panel is located on the front of the device, as is the intake area for the humid room air. The generated dry air is distributed widely in the room through the side outlet with high volume and strong airflow, ensuring efficient and even dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier.
SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.
Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.
condensation
The condensate is optionally collected in a 5.5-liter bucket or can be directly drained through a hose into a lower-lying drain. A float automatically interrupts operation when the bucket is full.
Temperature protection
If the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal.
dehumidification performance
The dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:
30°C / 80% r.H. = 50.0 Liters / 24h (650W)
27°C / 60% r.H. = 28.7 Liters / 24h (545W)
20°C / 80% r.H. = 25.6 Liters / 24h
20°C / 60% r.H. = 15.4 Liters / 24h
10°C / 60% r.H. = 7.3 Liters / 24h
(r.H.=relative humidity)
Characteristics
• Dehumidification capacity of up to 50 liters per day
• Electric hygrostat (LED) for regulating and setting the desired humidity
• Function for continuous operation/continuous dehumidification
• Memory function for storing data and for automatic resumption of operation after power interruption
• Clear display including current humidity, target humidity, and status overview
• Equipped with a high-efficiency rotary compressor (Rotary Compressor).
• Automatic professional defrost function
• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)
• Powder-coated metal housing/ metal bracket
• Very easy mobility due to side folding handles, guiding bar, 2 large and 2 smaller running wheels
• Operating warning light / Defrost light
• Maintenance-free / No separate or additional coolant is required (closed circuit)
• Air filter grid that can be cleaned
• The device is immediately ready for use (no installation or assembly required)
• Swiss plug 230 V
• CFC free and compliance with WEEE standards, CE, REACH, GS and RoHS certified
• Environmentally friendly refrigerant R290
Examples of use
Dehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.
Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)
Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.
Technical data
| Tension |
220-240V / 50Hz |
| Power consumption |
max. 710W (3.2A) |
| Sound pressure level |
1 m distance 64 dB(A)
2.5m distance 61 dB(A)
(our measurement) |
| dehumidification performance |
max. 50 liters/24h (30°C / 80% r.H.) |
| Recirculation air volume |
450 m³/h (free-blowing) |
| Condensation tank |
5.5 liter tank plus direct hose connection possible |
| Compressor |
Rotary compressor |
| refrigerant |
R290 (GWP: 3) |
| Dimensions (H x W x D) |
825 x 430 x 515 mm |
| Weight |
36 Kg |
| Operational cessation |
per key press / digital display |
| Ambient temperature |
5°C ~ 35°C |
| Area of application |
Rooms from min. 12m² to max. 130m² (340m³) |
| Swiss plug |
Yes |
| hose connection |
Yes |
| operating hour meter |
No |
| Guarantee |
2 years |
