"This heater is suitable for quickly warming seating areas on terraces, in lounges, sports halls, or conservatories, so that the cozy gathering does not come to an abrupt end due to the cold. Thanks to its slim, attractive design, this heater is not only a source of warmth but also integrates decoratively into the room design."     Usable as wall and ceiling heating radiators   A supplied bracket allows for horizontal or vertical mounting of the heater on the wall or ceiling. The 45° swivel joint enables precise alignment of the heat rays to seating or table areas. Additionally, an easy-to-install cable system with quick screw connection is included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself can be done easily with minimal DIY skills.     Feel-good atmosphere at the push of a button   The pleasant infrared heat is immediately noticeable on the skin after switching on. To adjust the heat intensity, the heater has two heating levels of 1100 watts or 2200 watts, which can be set directly on the device or via the included remote control. When mounted on the ceiling, the height is also crucial for how much the space below is heated and how wide the heat rays spread. The lower the height, the warmer and smaller the illuminated area becomes. In lounges, a height of about 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment according to the natural principle of the sun. Unlike devices with heating wires, infrared rays do not warm the surrounding air, but exclusively the surfaces and people they encounter. The irradiated objects (such as furniture, walls, and ceilings) absorb the heat and store it, gradually releasing it back. The objects thus serve as an additional energy and heat storage – even when the device is turned off, which further increases efficiency. The heat radiation creates a pleasant feeling of warm sunlight on the skin in summer.   The high heating level (2200 watts) covers an area of approximately 9 m² in outdoor areas (in cool surroundings) or a maximum of 15 m² in slightly tempered, wind-protected environments.    "In particular, allergy sufferers and people with sensitive airways will find the benefits of infrared heaters to be soothing. The clean and condensation-free instant heat is generated, unlike electric heaters, without dust swirling, disturbing noises, and unpleasant odors."     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-red light, which many people perceive as warm and cozy, but sometimes also as glaring. To prevent the surroundings from being too brightly lit, this heater is equipped with two shortwave infrared tubes featuring light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwave heaters produce a larger proportion of infrared light from the invisible light spectrum. The infrared radiation is bundled through an innovative coating process of the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology, with a lifespan of approximately 6000 hours.   Full heat output at lower brightness: "As the perceivable light is significantly reduced, the immediate surroundings of the heater create the impression of a cozy candlelight atmosphere, and the ambiance is noticeably more pleasant. An already existing lighting concept on the terrace or in the gastronomy is overall less affected."     Advantages at a Glance   • Instant heat without preheating• Uniform and targeted heat distribution• Clean, condensate-free, odorless and noiseless• No dust swirling, therefore suitable for allergy sufferers• 2 heating levels 1100W / 2200 Watts• Remote control• Elegant Design• Weather-resistant aluminum-plastic housing• High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light• Adjustable 45° tilt angle – with a large effective area• Usable in the covered outdoor area• LED display• Operating control light• Suitable for wall and ceiling mounting• Energy efficient     Information video on infrared heaters   Technical data  heating capacity max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W Heizart Shortwave infrared heat waves, low glare tubes effective area 9 - 15 m² Voltage 220 - 240 V/50 Hz rated current consumption max. 9.5 A Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg Protection class IP66 (dust-tight and protected against powerful water jets) Min. distance to flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED-Display and parental controls no Timer no Trotec article number: 1.410.003.215 guarantee 2 years

Learn more More Fewer

Proven UV dye for pipe break detection, available in various colors. This dispersion is water-dilutable. In the visible wavelength range, it leaves virtually no detectable traces, whereas when exposed to UV light, it glows intensely.  The product is particularly well suited for leak tests on water-bearing surfaces of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent substance can be detected and made visible under UV light.  Further applications can be found in non-destructive testing (NDT) as well as in leak detection, when capillarity is of secondary importance and no visible traces of the UV tracer should remain.  In order for users to have the optimal UV fluorescent dye for every task, the product is now available in four bright colors: Green, Red, Blue, and Purple.  Important: Luminat is not suitable as a food coloring.  scope of delivery 1 bottle with 1 liter of green dye Advantages at a Glance • Proven UV tracer for pipe break detection • No metabolism – optimal for long-term studies • Very intense color luminescence under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100 % formaldehyde-free fluorescent dye, made in Germany• Available in various colors – for every environmental condition and preference

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.470

Learn more More Fewer

Quick cooling and comfortable room climate at an affordable price. This 3-in-1 air conditioner offers efficient cooling for offices and rooms up to 20 m², making work more pleasant. In addition to the pure cooling operation, there is also a dehumidification and ventilation function.   When the preset target temperature (continuously adjustable between 17-35 °C) is reached, the integrated thermostat completely switches off the compressor in the unit. Compared to conventional designs, the air conditioning unit allows for an extremely economical cooling operation in this way. Of course, the compressor is automatically activated again when the target temperature is exceeded, as long as the unit is switched on.     Comfort features for well-being   "For a restful sleep without catching a cold, the device features a night mode that gradually raises the temperature. Additionally, the LED display can be completely turned off, so you won't be disturbed by any unnecessary light."    Two fan speeds and the variable adjustable airflow direction ensure optimal distribution of the air stream. In conjunction with the integrated 24-hour timer, electricity costs can be saved, as it allows for the timed switching on and off of the device. This is particularly helpful, for example, when the room is only used at certain times.    Follow-Me function: remote control with intelligent temperature measurement All functions and settings can be adjusted not only directly on the LED device control panel but also without getting up using the remote control. With the integrated "Follow-Me function," you can enjoy even more automatic comfort: The thermostat inside the air conditioning unit normally measures the current room temperature at its location and displays it on the LED screen. However, the remote control can also measure the temperature exactly at the location where it is currently situated. When the "Follow-Me function" is active, the air conditioning unit automatically receives the current temperature value from the remote control every 3 minutes and adjusts accordingly. So, for example, if you switch from a shaded spot to a sunny window with the remote control, the air conditioning unit will increase the cooling output to compensate for the warmer temperatures.    Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 1.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold growth. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal reservoir for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.     Installation and Maintenance   The air conditioning unit is set up with just a few simple steps and is ready for use immediately. The pre-assembled air filter cleans the room air of lint, dust, and pet hair and can be easily removed and cleaned.   Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.    Advantages at a Glance   • Energy efficiency class A • 2 kW cooling capacity  • Three operating modes: Cooling, Ventilation, Dehumidification• Two ventilation levels • Timer Function • Practical LED display • Display of room temperature • Easy-care membrane keypad• Adjustable air outlet direction • IR remote control • Removable air filter • Air purification function (pet hair, lint, dust)• Quiet operation   Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."     Technical data  cooling capacity max. 2 kW (7000 Btu/h) Our recommendation room size  max. 20 m² or 50 m³ Room size specification manufacturer max. 26 m² or 65 m³ Minimum room size 7 m² fan speeds 2 Selectable room temperature 17 - 30 °C dehumidification performance 1.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.3 A Recommended Coverage 10 A cable / connector 1.5 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (130g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 153 mm, Length 1.5 m Masse (H x B x T) 703 x 345 x 355 mm Weight 22.5 kg Trotec article no. 1.210.002.012 guarantee 2 years  

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.410

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.475

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 1100W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 1.09 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 4.8 A Power consumption max. 1.1 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without stand feet) Weight 9 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.018 Guarantee 2 years

Learn more More Fewer

A high-quality handheld device for determining moisture in soft building materials such as wood, gypsum, or plaster.  Ideal for measurement controls in forestry operations, sawmills, and all wood processing areas. Specifically designed for moisture measurement of wood materials, the device features a menu option that allows the selection of hundreds of different wood types. Additionally, numerous validated material curves are stored in the device software, which can be selected using the corresponding material numbers from the included wood species table. The wood species index, with over 170 pages, is arguably the most comprehensive material curve compendium on the market. The wood moisture value determined in real-time and the defined wood temperature are displayed simultaneously on the easily readable color display behind Blanview special glass during the measurement, which ensures a high-contrast measurement display even in sunlight. The moisture measuring device can be connected to the PC via a USB cable. With the optionally available MultiMeasure Studio software (available for free in the service/download area of trotec.de), the measured data can be transferred online and in real-time directly to the PC and saved for later analysis or reports. With the help of the online storage function, raster measurements can be carried out directly on the computer, such as in the case of measuring the moisture content of a basement wall to be tested.The standard delivery includes, in addition to the measuring device, two coupling nuts, ten measuring tips (length 20 mm, ø 1.5 mm), an electrode protection cap, batteries, an operating manual, and a 170-page wood species directory. Furthermore, you can significantly expand the device's range of applications with the optionally available TS adapter set and the TC 25 connection cable pair, allowing you to connect all electrodes from the MultiMeasure range.  Advantages at a Glance • Measuring device developed and manufactured in Germany according to the highest quality standards• Robust and high-quality two-component construction with protection class IP54• Easy-to-clean, continuous glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measurement values even in sunlight.• Capacitive Touch Control Panel• High-resolution color display for simultaneous display of two measurement values• Function for temperature compensation in wood moisture measurement• Integrated material characteristics for hundreds of different types of wood• Comprehensive material curve compendium including• Extended application spectrum through connection options for various moisture electrodes with optional TS adapter set• A suitable silicone protective cover for the device is included in the delivery.• Including measurement data management software MultiMeasure Studio (Download standard version)  Technical data  Measurement range construction moisture   0 to 100 digits Resolution: 0.1 Digit Measurement range wood moisture       Wood moisture: 0 to 100 M% Resolution: 0.1 M% Tolerance (based on the measurement principle): 0 to 5 M%: ± 0.8 M%; 5 to 30 M%: ± 0.2 M%; 30 to 100 M%: ± 0.1 M% operating temperature   0 °C to + 50 °C at Storage temperature   0 °C to + 60 °C at Battery 4 x Alkaline LR6 AA 1.5 V or NiMH batteries (> 2500 mAh) Optional energy supply 5 V USB Power consumption active approx. 80 mA passive approx. approx. 70 µA Battery life, active > 30 h Masse ((L x B x H) 174 x 63 x 35 mm battery type 2 x 1.5V, AAA Masse (L x B x H) 154 x 32 x 28 mm Weight approx. 300 g Trotec article no. 3.510.207.505 guarantee 2 years

Learn more More Fewer

A good air conditioner for cooling bedrooms, living rooms, or offices. Simply set your desired temperature in the range of 16°C to 31°C, and the device will automatically cool the room air to the set value. The extracted heat is expelled through an exhaust hose out of the window.  comfort functions With remote control, 24-hour timer, and automatic mode, this model offers you convenient control from your seat, pre-planned on or off switching, as well as self-cooling depending on the room temperature.  Ventilator function – with and without cooling Pure ventilation operation is also possible: a two-stage adjustable fan blower provides fresh air and gentle air circulation in the room with an air volume of up to 320 m³/h – even without activating the cooling compressor. The direction of the airflow can be manually adjusted with the horizontal air deflection flaps, so that the fresh breeze arrives exactly where you want it. In addition, the integrated air filter on the back of the unit filters lint, dust flakes, and pet hair from the room air – an advantage not only for allergy sufferers.  Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 0.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold formation. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal collection container for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.  Mobile and flexible instead of drilling and plugging If you want to place the device in another room, it can be easily moved from one place to another with its smooth-rolling transport wheels. Unlike permanently installed air conditioning units, you can always use a mobile air conditioner exactly where cooling is needed – without drilling, screwing, or plugging. You just need to secure the exhaust hose included in the delivery in a window or door opening, and you can start cooling the room. "To prevent warm outside air from entering the room to be cooled through the slightly opened windows or doors, we offer window and door seals as optional accessories. This way, you can cool even more efficiently."  Tip for restful sleep If you want to fall asleep on warm summer nights with gentle cooling, you can set a timer to have the air conditioning unit turn off by itself after a while to prevent your body from getting too cold during the night.  Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.  Advantages at a Glance • Suitable for rooms up to 24 m² / 60 m³• Energy efficiency class A• 2.6 kW cooling capacity• 3 operating modes: cooling, ventilation, dehumidification• 2 ventilation levels• Adjustable air outlet direction• Target value preselection in the range of 16°C to 31°C• Energy-saving operation through automatic switching off/on upon reaching/exceeding the target value• 24-hour timer• Remote control + intuitive LED display• Removable air filter against pet hair, lint, dust flakes• Quiet operation • Environmentally friendly refrigerant R290• Mobile air conditioners - Comfortable cooling machines  Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."  Technical data  cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size   max. 24 m² or 60 m³ Room size specification manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.5 A Recommended Coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, Length 1.5 m Masse (H x B x T) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1.210.002.022 guarantee 2 years  

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.420

Learn more More Fewer

Der Trotec TTK99 HEPA ist ein perfekter Allrounder für Ihren Haushalt. Dieser designstarke Luftentfeuchter und Luftreiniger eignet sich optimal zur Trockenhaltung von feuchten Kellern, Garagen und Waschküchen sowie zur schnelleren Wäschetrocknung. Mit seinem Intensiv-Filter sorgt er gleichzeitig für eine effektive Luftreinigung – für ein trockenes und gesundes Raumklima. Raumluftqualität im Blick: Dank Air-Quality-Sensoren Der Trotec TTK99 HEPA reguliert nicht nur die Luftfeuchtigkeit (30–80%), sondern reinigt die Luft auch gleichzeitig. Während man der Raumluft ihre Belastung durch Krankheitserreger oder Schimmelpilzsporen nicht ansieht, erkennt der TTK 99 HEPA, was Ihnen verborgen bleibt. Seine digitalen Feuchtesensoren messen fortlaufend die Raumluftfeuchte. Eine praktische, vorderseitige Farb-LED-Anzeige informiert Sie über die aktuelle Raumluftqualität: Blau: Zu trocken Grün: Optimal Rot: Zu feucht Effektive Entfeuchtung für grosse Räume Mit einer Entfeuchtungsleistung von bis zu 31 Litern pro Tag eignet sich der TTK99 HEPA ideal zur Trockenhaltung von Räumen bis zu 90 m² (230 m³), wie Kellern, Garagen, Archiven oder Waschküchen. Beachten Sie, dass das Betriebsgeräusch in ruhigen Wohn- oder Schlafzimmern deutlich wahrnehmbar sein kann. Hierfür empfehlen wir den leiseren Dryfix Royal 24 aus unserem Sortiment. Bei Bedarf unterstützt der TTK 99 HEPA auch die Wäschetrocknung erheblich: In leicht temperierten Räumen kann er 1-2 Waschmaschinenfüllungen pro Tag trocknen. Leistungsstarke Luftreinigung mit HEPA-Filter Das zweifache Filtersystem des TTK99 HEPA mit Vorfilter und Intensiv-Filter (EPA-Filter Klasse E11) entfernt bis zu 95% der Schadstoffe aus der Luft, darunter Viren, Bakterien, Schimmelpilzsporen, Pollen, Hausstaub und Allergene. Dies gewährleistet eine ausgezeichnete Reinigungswirkung. Besonders Allergiker schätzen, dass beim Wäschetrocknen herumfliegende Pollen vom Filter abgefangen werden und so nicht in Kleidung oder Bettwäsche gelangen. Komfort und Benutzerfreundlichkeit Hygrostatgesteuerte Automatik: Stellen Sie die gewünschte Luftfeuchtigkeit ein, den Rest erledigt das Gerät. Vier Betriebsmodi: Wählen Sie flexibel zwischen Automatik, Dauerbetrieb, Wäschetrocknung und Nachtmodus. 24-Stunden-Timer: Programmieren Sie Ein- und Ausschaltzeiten präzise in 1-Stundenschritten. Kindersicherung: Schützt die Einstellungen vor ungewollten Veränderungen. Auto-Restart-Funktion: Das Gerät startet nach einem Stromausfall automatisch neu mit den zuvor gewählten Einstellungen (Memory-Funktion). Vorteile des Trotec TTK99 HEPA auf einen Blick: Kombinierter Luftentfeuchter mit Intensiv-Luftreiniger (95% Filtration von Bakterien, Viren, Pollen, Feinstaub, Milben, Schimmelpilzsporen und Allergenen) Hygrostatgesteuerte Entfeuchtungsautomatik (30–80% r.F.) Geeignet für Räume bis 90 m² / 230 m³ Entfeuchtungsleistung: max. 31 Liter / 24 Stunden Luftqualitätsanzeige mit Farb-LED Anzeige der relativen Luftfeuchtigkeit Permanentmodus für Dauerbetrieb Timerfunktion (1–24 Stunden) Auto-Restart-Funktion (Memory-Funktion) Kindersicherung Überlaufschutz und Warnsignal bei vollem Wasserbehälter Wassertank: ca. 4 Liter Zweistufiges Gebläse Anschlussmöglichkeit für Ablaufschlauch Wäschetrocknungsfunktion Lieferumfang TTK 99 HEPA Luftentfeuchter EPA Luftfilter (Kategorie E11) Vorfilter Schlauch für Kondensatablauf Trotec TTK99 HEPA: Technische Daten Entfeuchtungsleistung (30°C / 80% r.F.) 31 Liter / Tag Luftvolumen 170 m³/h Maximale Raumgrösse 90 m² (100 m³) Minimale Raumgrösse 4 m² Temperaturbereich 5 - 32°C Feuchtigkeitsbereich 35 - 100 % r.F. Stromspannung 220 - 240 V/50 Hz Nennstromaufnahme max. 3.38 A Leistungsaufnahme max. 720 W Empfohlene Absicherung 10 A Kabellänge ca. 1.8 m Stecker EU-Stecker mit Schweizer Fixadapter Kältemittel R290 (90g) GWP3 Wassereimer 4 Liter Betriebsgeräusch (1m / 2.5m Abstand) 51 dB(A) / 48 dB(A) Abmessungen (T x B x H) 250 x 370 x 585 mm Gewicht 17 kg Abtauautomatik Umluft, elektronisch Entfeuchtungsautomatik Hygrostatgesteuert Ventilator radial, 2 stufiges Gebläse Automatische Abschaltung bei vollem Eimer Ja Vorfilter Ja Timer Ja Dauerbetrieb möglich Ja Wäschetrocknungsmodus Ja Display Zeigt aktuelle/eingestellte Raumfeuchte Memory-Funktion Ja (speichert Einstellungen) Schlauchanschluss Ja, kurzes Schlauchstück im Lieferumfang Trotec Artikel. Nr. 1.120.000.103 Garantie 2 Jahre Dokumente / Downloads für den Trotec TTK99 HEPA Bedienungsanleitung Deutsch Bedienungsanleitung Französisch Bedienungsanleitung Italienisch

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.425

Learn more More Fewer

The large area humidifier B400 is a powerful cold evaporator with air washing function. It is comparatively quiet and compactly built, ensuring good humidity in dry living rooms, overheated offices, as well as storage rooms and workshops up to 250 m².Functional principleA humidification mat is pulled through the water bath by a wheel and absorbs moisture. This creates a moisture buildup in the device, which is released into the room air by a two-stage adjustable fan. This method is very effective in humidification performance, while particles in the air are captured on the humidification mat and deposited in the water bath. The air humidifier thus also cleans the air of airborne particles such as dust and pollen.serviceThe operation is incredibly simple. The humidifier has only two rotary switches:Operating switch: three-stage - OFF, fan level 1 or fan level 2Hygrostat switch: for stepless regulation of the desired target humidityTwo lights also indicate when the device is in operation and when the water tank is empty.The humidifier has a metal housing (white powder-coated), stands on 4 wheels, and is easy to move.VentilationThe ventilation is two-stage, the maximum air output is 500 m³, the operating noise is good on level 2, and only minimally perceptible on level 1. The three ventilation grilles at the air outlet can be easily adjusted either forward or backward.Consumables and MaintenanceThe water bath (pull-out drawer) serves to provide the necessary moisture on one hand, but on the other hand, it also collects the dirt that is removed from the air. Therefore, it should be completely emptied and cleaned once a week. The humidification wheel is clicked into the holder from above and can be easily removed for cleaning; the degree of contamination and thus the necessity for cleaning is visible from above.As with all evaporative coolers, it is also advisable to disinfect the water in the B400 to prevent germs and bacteria. For this purpose, the silver cubes (Ionic Silver Sticks) are suitable, which are available as consumables from us. The silver cubes should be replaced once per season; otherwise, no consumables are required for this device.scope of delivery• ready-to-use device  Technical data  Tension 230V/50Hz consumption max. fan speed 1 fan speed 2 Standby 53 Watt 31 Watt 45 Watt 0 operating noise (at a distance of 2.5m) Level 1: 44 dB(A) Level 2: 49 dB(A) circulating air level 2 500 m³/h humidification max. 60 liters / 24 h Room size max. 200 m² steering mechanically Weight 19 kg Mass (HxWxD) 74 x 63 x 34 cm guarantee  2 years

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.480

Learn more More Fewer

In vacuum insulation layer drying, the use of a class H13 particulate filter is highly recommended to protect against mineral fiber dust, mold spores, and allergens in the air. This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It has been specifically designed for use with Trotec water separators and compressors and is characterized by optimal filter performance as well as a high separation efficiency. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominal > 99.97 % at 0.3 micrometer particle size. With 3 m² of filter area and 315 m³/h nominal air flow rate, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and provide performance reserves for combined use with up to two VE4S MultiQube or one VX5.  Optional filter class H14 "For an even higher purity rate, a filter of class H14 is optionally available (Item No. 7.160.000.223) with a separation efficiency of > 99.995 % at 0.2 micrometer particle size."  Hepacontrol Contaminated filters not only pose a contamination risk to the surrounding air, but they also have longer drying times and a risk of overheating.the compressor turbine as a result. Here, it offers even more safety compared to passive systems thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a used filter element, the warning light automatically turns on, clearly signaling the need for a replacement of the filter element. Hepacontrol does not require an additional power connection, as the supply of the bright warning LED is provided by an integrated and particularly long-lasting high-performance battery.  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  scope of delivery complete with housing and a filter element  Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h Number of hose fittings 4 x 38 mm (Rubber adapter available in 50 mm optional) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6.100.000.043 guarantee 2 years

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.430

Learn more More Fewer

"Striking in technical features, modest in price: The dehumidifier with built-in condensate pump."     Comfort function: Temperature-dependent air dehumidification   "For an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended for use in rooms with temperature fluctuations throughout the day or year. If the room temperature changes, the dehumidifier automatically adjusts its dehumidification performance."     Effective and simple   The device also naturally features a hygrostat-controlled dehumidification automation. A fixed air humidity value is selected, which should not be exceeded. The adjustable range is between 35 and 85% relative humidity, in 5% increments. If the value is exceeded, the dehumidifier automatically activates and switches off by itself in an energy-saving manner as soon as the desired target value is reached.     Gentle laundry drying with dehumidifiers   "In addition to dehumidifying the room air, the dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumbler. The laundry drying function is comparable to traditional air drying outdoors."   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, with significantly less energy consumption. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns. In contrast to pure air drying, the laundry becomes softer and more pleasant to wear against the skin because the garments move in the gentle breeze of the dryer during the drying process.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Convincing Features   The timer function, a fill level warning light for a full water tank, the overflow protection with automatic shut-off, and a laundry drying mode complete the comfort features of this TTK dehumidifier. In addition, the integrated, washable air filter allows for additional air purification by extracting dust or pet hair. Thanks to its wheels and practical carrying handles, the device is also well-prepared for flexible relocation. The operation is easy and low-maintenance due to its comfortable features.     Bucket, direct hose connection and integrated condensate pump   The water that is extracted from the air is collected in a standard 6-liter bucket. A float switch automatically stops the operation when the bucket is full. Alternatively, the water can also be directed through a hose to a lower drainage point. If no floor drain is available, the water can be pumped up to 4 meters high using the built-in pump in the device, for example into a sink, out of a basement window, or even one floor up. Direct drainage is particularly convenient in unattended operation, as it eliminates the need to empty the bucket (hobby rooms, holiday apartments, drying of water damage, etc.).    The integrated pump is not suitable for continuous operation.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Advantages at a Glance • Hygrostat-controlled dehumidification automation with selectable target value between 35 and 85 % r.H. in 5 % steps• Comfort operation for temperature-dependent automatic control of humidity• Overflow protection with automatic shutdown when the bucket is full • Level warning light when water tank is full• Connection for external condensate drainage with integrated condensate pump• Pump-out function for faster condensate drainage• Optional fully automatic or continuous operation• Easily readable, illuminated display• Display of relative humidity• Laundry drying function• Timer Function• 2 fan speeds • Cable winding     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 47 liters / day air volume 375 m³/ h Maximum room size 120 m² (100 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C moisture range 35 - 100 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 5.4 A Power consumption max. 1060W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss fixed adapter refrigerant R290 (145g) GWP3 water bucket 6 Liter Pump integrated, lifting height up to 4 m operating noise 50 dB(A) at 1 m distance47 dB(A) at a distance of 2.5 m Dimensions L x W x H 282 x 392 x 616 mm Weight 19.5 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Trotec PAC 3910 X – Starkes Klimagerät zur Kühlung von grösseren Räumen Ein vielseitiges Klimagerät, das Kühl-, Entfeuchtungs- und Ventilationsfunktionen in einem kompakten und mobil einsetzbaren System vereint. Mit einer Kühlleistung von 4.1 kW eignet es sich hervorragend für mittlere bis grössere Räume und schafft selbst an heißen Sommertagen ein spürbar angenehmes Raumklima. Funktionen, die überzeugen 3-in-1-Klimatisierung: Kühlung, Luftentfeuchtung und Ventilation – flexibel wählbar App-Steuerung via Wi-Fi für einfache Bedienung per Smartphone Follow-Me-Funktion: Die Temperatur wird dort gemessen, wo Sie sich befinden – für punktgenaue Klimatisierung Automatikmodus & Timer: Effiziente Steuerung ohne manuelles Eingreifen Nachtmodus: Reduzierte Lautstärke für störfreien Schlaf Schwenkfunktion (Swing) für gleichmässige Luftverteilung im Raum LED-Display & IR-Fernbedienung für komfortable Bedienung aus der Ferne Technische Merkmale im Überblick Artikelnummer 1210002133 Kühlleistung max. 4,1 kW / 14.000 Btu/h Raumgröße empfohlen bis 52 m² / 130 m³ Luftumwälzung max. 425 m³/h Entfeuchtungskapazität bis zu 3.75 l/h Betriebstemperatur 17–35 °C Geräuschpegel 52.3–53.6 dB(A) in 1 m Abstand Gebläsestufen 3 Energieeffizienz Klasse A Kältemittel R290 (230 g, umweltfreundlich) Stromanschluss 220–240 V / 50 Hz Leistungsaufnahme max. 1.6 kW Stecker EU-Stecker mit Schweizer Fixadapter Kabellänge 2.1 m Garantie 2 Jahre Design & Handhabung Kompakte Masse: 467 × 397 × 765 mm (L × B × H) Gewicht: 34 kg Mobil einsetzbar dank Transportrollen und Tragegriff Abluftschlauch: 1.5 m Länge – leicht über Fenster oder Tür zu führen Aufstellfläche: ab 12 m², mit mindestens 30 cm Abstand zur Wand Im Lieferumfang enthalten PAC 3910 X Klimagerät Abluftschlauch & Schlauchadapter Adapter zur Wandmontage Kondensatschlauch Luftfilter IR-Fernbedienung

Learn more More Fewer

A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Semi-professional dehumidifier for basements, construction sites, and laundry drying   This comfort dehumidifier protects and preserves what is dear and valuable to you. It is suitable for both robust dehumidification tasks in basements and laundry rooms, as well as for professional use in drying water damage or for keeping construction sites dry. Thanks to hot gas defrosting, it is also recommended for optimal drying results at low temperatures.     The all-rounder: Protects against mold, corrosion, and construction damage Excess moisture in the indoor air (> 60 percent) provides an ideal environment for pathogens. Mold also spreads in living spaces starting from this value, increasing the risk of respiratory diseases. Classic cars in the garage, artworks on the walls, and archived documents and books also suffer from excessive humidity. The causes of harmful humidity are diverse: deficiencies in building sealing, insufficient ventilation, as well as storms, flooding, or leaks in water-carrying pipes. The 122E keeps it dry.     Compact design – outstanding dehumidification performance Whether as a room climate improver in private settings or as a dehumidifier in commercial use – the cuboid stainless steel dehumidifier impresses with its comfortable features (e.g. 24h timer and auto-restart function as well as control panel lock function), an 8-liter condensate tank, and a strong dehumidification performance of 38 l/24 h at an air volume of 240 m³/h – sufficient for room sizes up to 100 m² or 250 m³. Thanks to the auto-restart function (memory function), the device automatically starts again in the pre-selected settings after a brief power interruption. For maximum user comfort, the control panel is equipped with easy-care membrane buttons and a digital display of room temperature and humidity. The target humidity can be set in 5 percent increments. Standard features also include a fill level warning light for a full water tank, overflow protection with automatic shut-off, and a reusable air filter that is easy to clean.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity."In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."    Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.     A dehumidifier for all occasions • Optimal suited for a healthy indoor climate in living areas• Moisture protection in archives, libraries, and art exhibitions• Corrosion and mold protection in (classic car) garages, basements, and storage rooms• Construction site drying and drying of damp masonry after water damage     Connection for external condensate drainage "For applications where regular emptying of the 8-liter condensate container is either not possible or undesirable, such as during unattended continuous drying operations in the basement, garage, holiday home, or on boats, the dryer features a built-in hose connection for direct drainage of the condensate into a drain. A short piece of suitable hose is already included in the delivery."     Hot gas defrosting automatic for faster drying results In low temperature ranges (below 12 °C), the integrated hot gas defrosting automatic system ensures consistently reliable air dehumidification – without long defrosting phases. Unlike the time-consuming recirculation defrosting of normal condensate dryers, the defrosting occurs through hot gas injection into the evaporator. This significantly shortens the duration of defrosting and achieves the drying goal more quickly.     SuperDry function for accelerated textile drying Practically for the quick dehumidification of wet laundry, clothing, or carpets is the special SuperDry function. This allows even large textiles to dry in no time, which do not fit in the tumble dryer.    Advantages at a Glance • Quality hot gas defrost automatic system• SuperDry function for accelerated textile drying• Automatic hygrostat-controlled dehumidification operation with real value humidity preset• Activated carbon filter against unpleasant odors• 24-hour timer• Auto-restart function (memory function) • suitable for construction drying • suitable for drying damp basements• suitable for laundry drying• Permanent mode• Easy-care material mix with a distinctive look• Digital display of current humidity and temperature values• Locking function of the control panel (child safety)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 38 liters / day air volume 240 m³/ h Maximum room size 100 m² (100 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 35°C moisture range 30 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.9 A Power consumption max. 750W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (96g) GWP3 water bucket 8 Liter operating noise 52 dB(A) at 1 m distance49 dB(A) at a distance of 2.5 m Dimensions L x W x H 453 x 310 x 635 mm Weight 27.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A high-quality work and assembly tent with a thoughtful design. Ideal for use on construction sites and in roadworks in the trade. "Even with just one person, the tent can be set up effortlessly in seconds and can be easily carried to other locations thanks to its lightweight. The possible extensions and a whole range of accessories also allow for tasks from electrical installations to welding work. Furthermore, the lightfastness of the polyester fabric used and the enormous flexibility provided by lightweight and robust materials are impressive." The assembly tent not only provides protection from rain but also from cold. Clever rain protection strips on all zippers prevent water from entering. And even in darkness, the tent is well visible thanks to reflective strips.  Advantages at a Glance • 3 zippers in the front, so that the entrance can be rolled up completely or partially.• 2 closable vents with grille and rain protection cloth• Transport bag included in delivery• Dimensions L x W x H: 120 x 120 x 200 cm• Weight: approx. 10 kg "Available upon request also individually with your company logo and in your desired colors." Trotec Article No. 4.110.003.046

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer

This powerful axial fan, combined with thoughtful accessories, offers a versatile solution for numerous applications. It is ideally suited for ventilation, air circulation, and dust extraction, for both cold and warm air. For transport over longer distances, various air transport hoses are available, while dust bags effectively capture dirt in enclosed spaces. Thanks to the variable accessory modules, you only need this one fan to perform a variety of tasks that you would have previously needed multiple devices for. This high-performance fan, like all models in the TTV series, has been specifically designed for use in the toughest conditions. Its robust construction and high reliability ensure a long service life, even in material-intensive continuous operation at varying locations. The powerful blower enables strong and large-volume air circulation, which leads to accelerated evaporation. The higher the flow velocity at the material surface, the faster the drying process occurs. By combining the dryer and blower, the drying time can be reduced by up to 50%, depending on the design. A versatile adapter for numerous applications: The hose adapter can be attached to the fan on both sides to optionally realize suction or ventilation. Additionally, by using two hose adapters, the combined use of air transport hose and dust bag for effective suction of dirt particles is possible.   Protection from dust during renovation work   During renovation work, material processing, and disposal, a lot of dust is inevitably generated. Therefore, protect yourself and your employees from hazardous fine dust while working. A proven alternative to reduce dust exposure is the extraction of dirt and dust particles. The washable Trotec dust bags have a permeability of max.     Advantages at a Glance   • Extremely robust for professional continuous use even under the harshest conditions• Spray water protected (IP55)• Space-saving stackable for transport and storage• Suitable hose adapter available: The optional attachment allows for the connection of air transport hose or dust bag, e.g. for the extraction of dirt particles.     Technical data   Air volume max. 5300 m³ / Std. (free blowing) Ventilator Axial Fan speeds 3 Air speed 11 m/s (= 39.6 km/h) Throwing distance outside 15 mwithin 50 m Air pressure 80 Pa (at highest level) Funding temperature max. 45 °C Mains connection 230 V, 50 Hz Nominal current consumption 1.1 A Power consumption 250 W Insurance 10 A Cable + plug 3m, EU plug with Swiss fixed adapter Protection class IP55 Operating noise 53 dB(A) at a distance of 3m hose connection Diameter 450 mm Dimensions H x W x D 520 x 515 x 358 mm Weight 14.5 kg Trotec article no. 1.510.000.010 Guarantee 2 years  

Learn more More Fewer