This infrared measuring device determines the temperature of surfaces in seconds using infrared. The smartphone is used for controlling, storing, and analyzing the data.   The optical resolution is 10:1 with a temperature measurement range of -30 °C to +250 °C. The multipoint laser automatically visualizes the measurement spot size. The preset emissivity saves manual adjustments and covers a wide variety of different materials. The measuring device is ready for use immediately, can be easily connected to the app, and then displays all measurement values on the mobile device.   Compared to conventional pyrometers, users benefit from numerous additional advantages in terms of flexibility, analysis functions, data control, and documentation thanks to the "Multimeasure Mobile" app, which are otherwise only found in much more expensive measuring devices. For example, there is the possibility of multi-colored graphical representation of temperature curves or the temperature distribution on a wall in the form of a matrix measurement.   "By using the app, additional functions and analysis options are also available, including an additional display of maximum, minimum, or average values, for example, the input of individual threshold values, which will automatically trigger an acoustic alarm when exceeded or not met."   "Compare different temperature measurements of an object directly in the app, which were taken at different times, or use the appSensor in conjunction with a parallel connected thermohygrometer BC21WP for differentiated dew point control."     Features • Minimal value display• Maximum value display• Average value display• Message retention function• Automatic shutdown after approx. 3 minutes without Bluetooth connection• Alarm function• Long-term measurement function• Multi-point laser target aid• non-contact measurement method• Diagram / Matrix / Table representation of the measurement data • Data export• Report function • Display in °C or °F selectable • Battery status display     Advantages at a Glance   • Non-contact surface temperature measurement from -30 °C to +250 °C• Multipoint Laser• Messoptik 10:1• Emission rate adjustable from 0.1 to 1.0• High-quality sensors and numerous measurement functions• Intelligent combination of appSensor and the app Multimeasure Mobile• Automatic switch-off   What is an AppSensor? Trotec appSensors are compact precision measuring devices with high-quality sensors, designed to save energy and space, and do not have evaluation electronics or display units, as operation and data evaluation of the devices are almost entirely handled through the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages. The app is available for IOS and Android.  App "Multimeasure Mobile" "MultiMeasure Mobile" offers a variety of advantages for you: • Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Measurement display numeric or as diagram / matrix• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud Your mobile device becomes a multifunctional measurement data manager. All app sensors are automatically recognized and can be connected and read via Bluetooth with the app. The operation is as simple and intuitive as the installation.       scope of delivery   • measuring device• Battery(n)• Hand strap• User manual     Technical data   max. 10 range in open area Optical resolution (D:S) 10:1 smallest measuring spot Ø 12.7 mm (Distance 254 mm) Measuring range -30 °C to +250 °C Spectral Sensitivity  8 - 14 µm response time 0.3 Sek. environmental conditions     Temperature 0 °C to 50 °CHumidity 10 to 90 % r.H.Storage -20 °C to 60 °C, max. 80% r.H. Laser classes 2 (II) laser wavelength 630 - 670nm laser power 1 mW Bluetooth 4.0 Low Energy   2.4 GHz, 10 dBm transmit power Range approx. 10m in open area Weight 110 g energy supply Batteries (3 x 1.5V, AAA) Masse (L x B x H) approximately 150 x 37 x 24 mm Weight 110 g Protection class IP40 Trotec article no. 3.510.006.031 guarantee 2 years  

Learn more More Fewer

This sensor is an electronic moisture indicator that non-destructively measures the capacitive moisture in solid materials such as walls, floors, or ceilings up to about 3-4 cm deep. The measuring device is ready for use immediately, can be easily connected with the app, and allows you to quickly and easily locate surface moisture distributions. "Not only is the quick indication of various surface moisture values possible, but this sensor is also particularly well-suited for the preliminary assessment of the readiness of building materials in CM measurements."  Extended evaluation and functionality thanks to the app Compared to non-app-supported moisture measuring devices, users of this device benefit from numerous additional advantages in terms of flexibility, analysis functions, data control, and documentation with the free app "Multimeasure Mobile." Compare different moisture measurements of an object, which were taken at different times, directly in the app. Or use the measurement values in combination for differentiated analyses directly on site. Useful additional features such as the alarm function, the export of moisture measurement values to further analysis software, and the creation of a report complete the universal application possibilities of the BM31WP and make this measuring device a valuable tool in the field of structural diagnostic tasks. With the MultiMeasure Mobile App, not only can the MIN, MAX, and average values be displayed automatically or individual measurement values marked directly in an image, but also elaborate graphical representations in the form of a photo-linked moisture matrix can be created, saved, and sent. The grid to be measured can be overlaid with a real image and later output as an overlay graphic with the moisture matrix for documentation – for example, for your measurement report, which you can generate and send directly on-site from the app.  What is an AppSensor? Trotec appSensors are compact precision measuring devices with high-quality sensors, designed to save energy and space, and do not have evaluation electronics or display units, as operation and data evaluation of the devices are almost entirely handled via the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages.   App "Multimeasure Mobile" "MultiMeasure Mobile" offers a variety of advantages for you: • Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Measurement display numeric or as diagram / matrix• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud   Your mobile device becomes a multifunctional measurement data manager. All app sensors are automatically recognized and can be connected and read via Bluetooth with the app. The operation is as simple and intuitive as the installation.    Advantages at a Glance • Quick and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Professional sensor technology for precise measurement results• Easy app connection via Bluetooth with optical connection confirmation via LED on the device• Wireless measurement device control and data display via app• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device.• Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Wrist strap for secure handling included• Automatic switch-off Trotec appSensors house professional sensors for precise measurement results, specifically developed for this purpose. Therefore, for professional measurements, use the clever combination of appSensor and MultiMeasure Mobile – the free app available for iOS and Android.  scope of delivery  • measuring device• Batteries• Hand strap• User manual     Technical data   Measuring range 0 - 100 Digits resolution 0.1 Digit Messprinzip dielectric / capacitive Ambient temperature 0 °C to 50 °C ambient humidity 10 - 90 % r.H. (Storage: max. 80% r.H.) Bluetooth 4.0 (BLE), max. 10 m transmission range in open area Masse (L x B x H) 160 x 36 x 22 mm Weight 93 g Trotec article no. 3.510.206.031 guarantee 2 years      

Learn more More Fewer

Compact digital thermometer for measuring ambient temperature in air ducts and shafts.     Temperature measurement with app control and smartphone connectivity   The digital thermometer BT22WP, equipped with an ultra-thin probe, is excellent for measuring the ambient temperature of non-aggressive gases in hard-to-reach places, in air ducts, shafts, as well as for measuring the temperature of non-aggressive liquids.     Universal temperature measurement in air and in liquids   Thanks to its ultra-fine and 93 mm long temperature probe, the BT22WP measures the temperature of air as well as non-aggressive gases and non-aggressive liquids in the temperature range of -50° C to +150° C wherever conventional digital thermometers must fit due to their design. The temperature probe made of high-quality stainless steel is stable and easy to clean. With its compact dimensions and rod-shaped measuring probe (∅ 4 mm, L = 93 mm), the BT22WP has advantages over conventional thermometers also due to its Bluetooth 4.0 compatibility and the included MultiMeasure Mobile App (Android and iOS).     Evaluation and Logging Included – MultiMeasure Mobile App   As a Trotec measuring device of the latest generation, the digital thermometer BT22WP is equipped for all requirements of professional measurement data evaluation and documentation. The integrated Bluetooth® interface allows the recorded measurement data to be easily and conveniently transferred to a smartphone or tablet, where it can be professionally evaluated or documented using the free MultiMeasure Mobile app (Android and iOS).   The advantageous combination of handheld measuring device and MultiMeasure Mobile evaluation software not only enables professional temperature measurement but also provides extensive evaluation and logging of measurement data – including various analysis options such as logging function for long-term measurements, graphical evaluations, reporting function, and data synchronization with our professional software MultiMeasure Studio Professional via Cloud.    Quick measurement of ambient temperature in hard-to-reach places  "Whether as a plant mechanic for heating, ventilation, and air conditioning technology, an expert, or a caretaker: With the Bluetooth® digital thermometer BT22WP, you are optimally equipped for all temperature measurements in air ducts and shafts, to detect malfunctions and unwanted temperature deviations smarter than ever. The BT22WP is also recommended for the inspection and maintenance of car air conditioning systems."     Practical, handy, simply good: Advantageous equipment   The lightweight 90 g BT22WP combines innovative measuring technology in the smallest space and is incredibly easy to operate. In a single value measurement, the measurement value can be updated both via the Multimeasure Mobile App and directly on the device with a simple press of a button. In addition to the measurement hold function, the smart handheld measuring device allows for the display of minimum, maximum, and average values, as well as the execution of series measurements.   "In combination with the professional Multimeasure Mobile App, completely new possibilities for data collection, evaluation, and reporting open up. A single press of a button is all it takes to start the measurement. With its integrated magnetic holder in the housing, the BT22WP allows for hands-free operation and a secure hold on magnetic surfaces."     scope of delivery    • Bluetooth®-Thermometer BT22WP• Free MultiMeasure App• Practical hand strap• 1 x User Manual     BT22WP – Advantages for Practice   • Compact digital thermometer for measuring ambient temperature (measuring range -50 to 150 °C, measurement accuracy ±1 °C) in air ducts and shafts.• Min/Max and Data Hold Function• Integrated magnetic holder for hands-free operation• Bluetooth® connectivity for using the free MultiMeasure Mobile app     Technical data air temperature Measuring range -50 to 150 °C / -58 to 302 °FResolution 0.1 °C / 0.1 °FAccuracy:±2 °C (3.6°F) @ ±1 °C (1.8°F) @ ≥ 0 °CTemperature liquidsMeasuring range -50 to 150 °CResolution 0.1 °Caccuracy±2 °C (3.6°F) @ ±1 °C (1.8°F) @ ≤ 0 °C   Bluetooth4.0 (BLE)Max. transmission range 10 m in open areas   Environmental conditionsOperating temperature -20 to 50 °CStorage temperature -20 to 60 °COperating relative humidity max. 80 % r.H.Storage rel. humidity 10 - 90 % r.H.   Dimensions (Length x Width x Height) 23 x 38 x 220 mmWeight (without packaging) 90 g Power supply 3 x 1.5 V, AAA Trotec Article No. 3.510.205.009   warranty 2 years  

Learn more More Fewer

The appSensor BM22WP is an electronic moisture indicator that, in combination with the MultiMeasure Mobile App, enables the determination of wood and building moisture using the resistance method.   Wood moisture range 0-50%, material moisture 0.2-2.4%The measuring device BM22WP is ready for use immediately, can be easily connected with the app, and allows you to quickly and easily detect surface moisture in various materials. Due to the easily interchangeable piercing steel measuring pins of the BM22WP, a solid connection with the test material is possible. This ensures quick measurement results for wood moisture detection of cut and firewood or for material moisture determination in soft building materials such as gypsum, plaster, or screed. "Compared to non-app-supported moisture measuring devices, users of the BM22WP benefit from the clever combination of appSensor and the associated free app Multimeasure Mobile, gaining numerous additional advantages in terms of flexibility, analysis functions, data control, and documentation." "Compare different moisture measurements of an object directly in the app, which were taken at different times. Or use the measurement values in combination for differentiated analyses directly on site. Useful additional features such as the alarm function, the export of moisture measurement values to further analysis software, and the creation of a report complete the universal application possibilities of the BM22WP." Moisture matrix made easy, also linked to photos With the MultiMeasure Mobile App, not only can the MIN, MAX, and average values be displayed automatically or individual measurement values marked directly in an image, but also elaborate graphical representations in the form of a photo-linked moisture matrix can be created, saved, and sent. The grid to be measured can be overlaid with a real image and later output as an overlay graphic with the moisture matrix for documentation – for example, for your measurement report, which you can generate and send directly on-site from the app. What is an app sensor?Trotec appSensors are compact precision measuring devices with high-quality sensors, designed to save energy and space, and do not have any evaluation electronics or display units, as operation and data evaluation of the devices are almost entirely handled through the connected smartphone. In conjunction with the freely available app MultiMeasure Mobile, this measuring device concept can convince with many advantages. "These advantages are offered to you by all appSensors from Trotec." • Professional sensor technology for precise measurement results• Easy app connection via Bluetooth with optical connection confirmation via LED on the device• Wireless measurement device control and data display via app• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device.• Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Wrist strap for secure handling included• Practice-oriented German industrial design – protected design pattern Why app sensors? Aren't there already many apps for measuring?Of course, there are numerous apps that utilize the electronic components built into smartphones for measurements or derived calculations, such as the integrated microphone, the gyroscope, the camera, or other components. However, these components were not designed for precise measurement investigations, but primarily for optimal usability of the mobile device. On the one hand, the results obtained are therefore not comparable to the results of sensors specifically designed for measurement applications. On the other hand, there is not a suitable electronic component in the existing smartphone for every measurement task, for example for contact moisture measurement or non-contact temperature measurement. Trotec appSensors, on the other hand, house professional sensors for precise measurement results, specifically developed for this purpose. Therefore, for professional measurements, use the clever combination of appSensor and MultiMeasure Mobile – the free app available for iOS and Android. Multimeasure Mobile - all app benefits at a glance "For the smartphone operation of this appSensor, you need MultiMeasure Mobile – a free app for controlling, evaluating, and displaying measurement data from all appSensors connected to your mobile device from Trotec." MultiMeasure Mobile offers a variety of advantages for you: • Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Measurement display numeric or as diagram / matrix• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud MultiMeasure Mobile turns your mobile device into a multifunctional measurement data manager.All app sensors are automatically recognized by MultiMeasure Mobile and can be connected and read via Bluetooth with the app. The operation is as simple and intuitive as the installation: just download MultiMeasure Mobile for free to your mobile device. Advantages for Practice • Wood moisture and material moisture measurement with a device• Protection cap with integrated test function• Easily replaceable puncture steel measuring pins• Automatic function and battery test• High-quality sensors and numerous measurement functions• Intelligent combination of appSensor and the app MultiMeasure Mobile• Automatic switch-off Technical datawood moistureMeasuring range min. 6 - max. 50 %Resolution 1 %Accuracy approx. ± 2 %Mess principle: Resistance methodmaterial moisture [%]Measuring range min. 0.2 - max. 2.4 %Accuracy approx. ± 0.2 %Resolution 0.05%Bluetooth4.0 (BLE)Max. transmission range 10 m in open areashousing designElectrode length 8 mmEnvironmental conditionsOperating temperature min. -20 °C - max. +60 °COperating relative humidity min. 10 % - max. 90 % r.H.Storage relative humidity dimensionLength x Width x Height 22 x 33 x 140 mm Trotec Article No. 3.510.206.025warranty 2 years

Learn more More Fewer

This color powder is visually recognizable without technical aids and is ideally suited for direct gradient or connection control in the detection of faulty or leaky connections and incorrect discharges from drainage systems. The productive marking dye can be mixed in water as a color solution in any desired color intensity, as the pure powder mixtures are completely free from dosage limits due to their extreme environmental compatibility. Further applications lie in tracer hydrology, for example for flow path verification, for visualizing the mixing and flow behavior in flowing waters, lakes, reservoirs, or water treatment plants, as well as for monitoring flow rates and flow velocities in fish ladders. "The Pure dye is also an ideal tool for simulated hazardous material visualizations during GSG exercises of the fire department.""Individually adjustable for every need" "Due to their 100% natural food-grade ingredients, the colorants of the Pure series can be dosed as desired - an overdose is not possible.""Depending on the desired intensity, 2 g of pure dye can be added per 1 to 5 liters of water, thus producing a pure dose of between 100 and 500 liters of color solution."  Advantages at a Glance • 100% natural, food grade• hypoallergenic, vegan, kosher and halal• 100% biodegradable• Safe for humans and animals• No impairment of water quality• No maximum dosage limits• Water-soluble powder - easy handling  composition Radish, apple, black currant, citric acid, and maltodextrin  Technical data  Masse (L x B x H) 70 x 70 x 165 mm Contents 200 g ingredients Radish, apple and black currant, citric acid and maltodextrin scope of delivery 1 Dose Trotec article no. 3.510.012.051

Learn more More Fewer

Universally applicable safety glasses. They protect against UV rays during non-destructive leak detection using tracer detection. They are also perfectly suitable for use in the manufacturing industry. They protect against specific risks such as abrasion, airborne particles, biological hazards, etc.  EG Category PSA Category II, EN 166/169; European Directive 89/686/EEC, optical class 1, F - Impact with low energy (45 m/s):The glasses meet the EN166/169 standard, which prescribes 100% UV protection against radiation with a wavelength of 380 to 400 nanometers. The standard is set by the European Union for occupational safety glasses and is an important quality feature for UV protection glasses.  Characteristics • Made of polycarbonate for high impact resistance and effective UV protection• Clear, color-neutral tint that provides good protection against glare.• Scratch-resistant, also ideal as overglasses  Best protection against UV radiation When working with UV light, one must always wear glasses to protect the eyes from harmful UV radiation. For example, when using UVA handheld lamps, UV-TrackMaster, or leak detection device UV-Torchlight 15F. Otherwise, harmful effects such as corneal inflammation, cataracts, or retinal inflammation may occur.  Technical data EN166/169 Standard: fulfilledUV protection: 100%Tint: clear, color neutralMaterial: PolycarbonatApplication area: Industry, OutdoorTrotec Article No. 3.510.011.100

Learn more More Fewer

The hose is particularly suitable for our devices in construction drying and water damage restoration. It is durable, vacuum-resistant, and has good pressure resistance. Also available in 51mm diameter.  scope of delivery 15m hose reel, black (also available in yellow on request)Technical data  Suitable temperature range 0 to +85°C length extended 15 m diameter 38 mm Material two-layer spiral hose with wire spring Bending radius 38 mm Trotec article no. 6,100,001,010 black guarantee 2 years

Learn more More Fewer

With this joint cross method, insulation layer areas under grouted wall and floor coverings can be dried without having to destroy the panels. Optimal for value preservation or for coverings that are no longer available, such as tiles or other grouted hard coverings. Unlike conventional distributors of this type, which have a hose connection at the head side, this system features a longitudinal hose connection for 38 or 50mm hoses. This leads to very favorable, low-turbulence pressure and flow conditions. Additionally, it offers the advantage that the system can be expanded arbitrarily for larger areas. Multiple systems can be connected using the optionally available coupling.scope of delivery • Aluminium distributor• 10 air hoses• 10 ground spikes   Technical data  air connections 1 air outlets 10 Masse (B x H x T) 250 x 38 x 100 mm Weight 660 g Trotec article no. 6.100.009.020 guarantee  2 years

Learn more More Fewer

This nozzle is designed to allow the entire air volume of the incoming or outgoing air to circulate under the door.  The nozzle is pushed under the door and connected to air hoses on both sides of the door. To ensure that the entire volume of air can be transported under the door, the passage inside the nozzle is expanded to the maximum width, allowing the air to circulate well despite the low flow height. A protective mat (protector) protects the floor underneath from scratches.  In this way, the complete drying installation can be flexibly relocated to rooms that have minimal noise disturbance for the affected party. Furthermore, the drying time is reduced if the room can remain closed. The nozzle is designed as standard for connecting hoses with a 38 mm inner diameter. For the use of 50 mm hoses, a separate adapter ring is available, which can be easily slipped over the nozzle to increase the diameter.  Technical data  connection nozzle I 2 on both sides suitable hose diameter 38 mm Masse (B x H x T) 400 x 74 x 157 mm Weight 1.7 kg Trotec article no. 6.100.000.160 guarantee 2 years

Learn more More Fewer

This air hose is compatible, among other things, with the adapter for the construction dryer TTK171Eco. Due to its lightweight, it is easy to handle and transport. With a high bending radius of 1 x diameter, it is extremely flexible and versatile. Its specially coated PVC jacket is abrasion-resistant and difficult to ignite.  Technical data • Temperature -5 °C to +80 °C• Standard length 6 m• Bending radius 1 x diameter• Inner diameter 160 mm• PVC-coated polyamide fabric• vibration-resistant and difficult to ignite• Reinforcement by concealed spring steel spiral• wavy inside and outside• hochflexibel• Color gray

Learn more More Fewer

The practical telescopic probe makes this precision anemometer from the MultiMeasure Professional series a versatile measuring instrument for determining flow, temperature, and volumetric flow rate. "For measurements in channels or at remote locations, the probe can be extended continuously up to one meter of usable length."The combination of a robust heat wire sensor and advanced microprocessor technology for signal processing ensures fast and precise measurement results for every requirement, which are clearly displayed on the illuminated dual display of the user-friendly LC display, even in poorly lit environments.  application examples   • Examination of heating systems, ventilation ducts, or air conditioning units • Adjustment of the Lutt current when using multiple devices • Commissioning• Maintenance tasks• Measurement of air velocity and temperature at air ducts and ventilation slots• Certification of critical environments• Channel measurement• Leak tests on windows or doors    Advantages at a glance • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min, ft³/min)• Slim telescope probe - infinitely extendable up to 1 m in length - allows measurement even in hard-to-reach places.• Large, easy-to-read LCD with backlight and dual measurement display• Pointwise and temporal averaging• Minimum, Maximum, and Hold Function• Delivery including calibration certificate     Optional   First, read the data stored in the device, such as images, Excel spreadsheets, or graphics using the software included in the delivery. Now transfer the results by copying and pasting into one of the pre-made report templates of the MultiMeasure Studio PRO software (download MultiMeasure Studio STD), which allows you to easily and quickly create professional measurement reports in this way. The text modules already included (currently only available in the German version) and sample reports are fully editable and can also be compiled into new templates defined by the user at any time.     scope of delivery   • measuring device • evaluation software • operating instructions   Technical data   air flow measurement Measuring range accuracy resolution Messprinzip   measuring air volume Measuring range   Measurement of air temperature Measuring range  accuracy resolution   0.1 bis 25 m/s ± 5% of the measurement value + 1 measurement unit 0.01 m/s hot wire     0.001 - 999,000 m³/min or ft³/min     0 °C to +50 °C ± 1 °C 0.1 °C   Display LCD interfaces USB energy supply 9V Block Battery Ambient temperature 0 °C to +50 °C Masse L x B x H 210 x 75 x 50 mm Weight 280 g tripod thread yes, 1/4 inch Automatic shutdown system and Trotec article no. 3.510.205.042 guarantee 2 years  

Learn more More Fewer

With a power consumption of 2000 watts and flexible adjustment of hot air temperature and blower performance, this hot air blower allows you a wide range of applications from soldering, welding, and tinning work to adhesive curing and paint removal, as well as shrink wrapping or paint drying.     Versatile configurable for a variety of applications   To ensure that it always operates at a controlled high temperature during use, the device offers many comfortable adjustment options. The hot air temperature can be practically adjusted in 10-degree increments between 50 °C and 650 °C at the push of a button. Similarly, the air volume can be regulated in 5 stages between 250 and 500 liters per minute. In this way, you can optimally configure the "Hystream" for any application.   "Particularly practical is the rear color LCD. On the display, you not only have the respective working values of temperature and air volume clearly in view, but a color change also informs you when the selected temperature value has been reached. Green signals the heating phase, red confirms the achievement of the target temperature – it's that simple."    The handling is just as simple: the low weight of only 800 g is noticeably pleasant, especially during longer operations, and the ergonomic design of this hot air device ensures comfortable working and a secure grip through the pistol grip with soft grip and protective guard.     Practical functions for more comfort and safety   The hot air blower is electronically controlled and thus ensures a constant working temperature even during continuous operation – a must for particularly precise soldering and welding work. Additionally, an overheating protection is integrated, which automatically switches off the heating element in case of overload, while the blower remains in operation.    "In addition to the 60 hot air levels for high temperatures up to 650 °C, the 'Hystream' also features a cold setting at 50 °C for quick cooling of the material being processed or for changing the attachment nozzle."    "For each temperature level, the heating coil can also be cooled down particularly gently and quickly before the device is stored away again after use."   Thanks to the specially balanced weight distribution, this thermal tool can also be used effortlessly in a stationary, tip-proof stand operation for hands-free working.    This allows you to hold the workpiece securely with both hands, which is particularly practical when bending pipes. But the stationary operation is also an advantageous solution for longer soldering tasks and many other stationary applications.     All-rounder at professional level – special applications included   The nozzle set included in the standard delivery makes this hot air blower the optimal thermal tool for practically any task:    • A deflector nozzle protects heat-sensitive substrate materials from overheating by redirecting heat rays. Ideal for removing old paint coatings and putty from window frames or for restoration work.    • With the grill starter nozzle, the charcoal is well-lit and ready for grilling in just a few minutes.     • The reduction nozzle focuses the heat beam for more precise work, for example for paint removal in corners or for welding.    • And a wide spray nozzle ensures a continuous area air distribution, optimal for the large-scale removal of old paint coatings or even drying of filler work.    When not in use, the integrated hanging loop in the cable provides a helpful hanging option for quick access.      Advantages at a Glance   • 2000 Watt powerful hot air blower• Ergonomic pistol design with soft grip and protective guard• Large, easily readable LCD display of the selected power values• Display color change upon reaching the desired temperature• Air volume adjustable in 5 stages between 250 to 500 liters per minute• Temperature control from 50 °C to 650 °C in 10-degree increments• Safe operation through overheating protection• Hanging eye on the cable as a storage option• Thanks to balanced weight distribution, it is stable in stationary operation when working hands-free.• Nozzle set for many special applications already included in the scope of delivery• Cold setting for rapid temperature reduction• Fatigue-free working thanks to the low weight   Technical data  power connection 230V / 50 Hz cable / connector approx. 2 m, EU plug with Swiss fixed adapter air volume flow 250 - 500 Liters/Hour fan speeds 5 Blow-out temperature max. 650 °C Weight 800 g Masse (B x H x T) 270 x 210 x 60 mm Regulating Temperature in 10 °C increments Trotec article no. 4.435.000.020 guarantee 2 years

Learn more More Fewer

For professional setup of the infrared panels of the TIH-S series, we recommend these stable stand feet. Especially for the wider models from TIH500S to TIH1100S, they guarantee a robust stand. They are inserted laterally into the panels and secured on both sides with four screws each.  The feet are designed to ensure that the heating unit maintains the optimal distance from the wall when positioned along a wall, allowing for air circulation and the efficiency of the panel to be guaranteed.       Product details   • Material: anodized aluminum, black powder-coated• Can be used in any room• Easy installation• Maintenance-free• Usable for all heating plates TIH-S series • Scope of delivery: 1 pair (=2 pieces)   Trotec Article No. 1.410.003.099

Learn more More Fewer

Cozy feel-good warmth   "As the days in the transition period to autumn/winter become colder, but the stationary heating system is still turned off for cost reasons, the ultra-flat design convector TCH 1510 E provides pleasant, odorless, and noiseless warmth for comfortably tempered rooms with its continuously adjustable heating power of 1500 watts via thermostat – whether you use it as a wall or standing device."     Stylishly shaped   A large-area and highly efficient aluminum heating element of approximately 55 cm in length, along with aerodynamically shaped air outlets on the top of the device, ensures rapid heat distribution in rooms up to 20 m² or 50 m³. Whether in a modern living environment, in office settings, in the bathroom, or even in unheated conservatories, garages, or holiday homes: wherever quick and/or additional heat is required, the design convector demonstrates its performance. It belongs to protection class IP24 (splash-proof) and is therefore also approved for damp rooms. However, please ensure that sufficient distance from water is maintained when installing in bathrooms.     Uniform convection heat   In the TCH series convectors, the air in the device is heated by electrically heated wires and consequently rises as warm air, creating a natural draft that draws in cold room air into the device. This creates a continuous circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus preventing overheating or underheating of individual areas. Once the preset temperature is reached, the device reduces its output and maintains the desired temperature.     Innovative window-open detection prevents energy waste   Regular ventilation is essential for a good and healthy indoor climate. To avoid unnecessary energy waste during ventilation, the device features an energy-saving window-open detection. When the window is opened, the convector reduces its heating output in thermostat-controlled automatic mode until the window is closed again. An automatic temperature control of the room temperature and an intelligent heat automation further reduce the already economical energy consumption. When the preset desired temperature (in the range of 0 to 50 °C) is reached, the heating element automatically switches off and only turns back on when additional heating is required. This keeps the energy consumption of the convector pleasantly low, and no expensive energy costs are thrown out the window.     Smart equipment for warm feel-good times   The comfort features of the design convector are rounded off by a room temperature and clock display, two operating modes (automatic and weekly mode), stable stand feet for flexible use in different locations, a wall mount, an operating hours display, and an extra-long power cable for maximum freedom of movement.     Cozy warm interiors with comfort   This heater operates with the effect of uniform convection heat and, like this, it can be used almost everywhere in private living environments or in offices: for example, as an emergency heater when the main heating fails, as a reliable transitional heater before the heating period begins, or for heating areas such as conservatories, garages, hobby rooms, or basement areas that are not connected to a central heating system.     Operating hours display – keeps consumption in view   "Whether as a tenant or landlord – it can occasionally be helpful to know how much heating costs have been incurred over a specific period. With the practical operating hours display, you can monitor and record consumption down to the hour."     Weekly mode – individual heating times and temperatures every day   Every day is different. On weekends, we usually spend more time at home, and accordingly, the heating demand is greater. A programmable weekly timer allows you to program individual heating times and room temperatures for each day of the week.   "More warmth on the weekend and less warmth during the week when you leave the house in the morning: In week mode, individual room temperatures and heating times can be assigned to each day of the week. Quite practical."     Child safety lock – for safe operation in the children's room   The child lock protects the device settings of the convector from curious children's hands. Once activated, the device settings can no longer be changed via the control panel.     Frost Guardian Function   Ideal for short-term property vacancies or spaces that are not constantly used. With the stepless thermostat control, you can also use the devices in frost protection mode. The heating device is then automatically activated via the thermostat to keep the rooms frost-free or to prevent excessive cooling. The TCH convectors are not only ideally suited for landlords or real estate companies as frost protection devices – they also provide a practical function for private individuals or businesses to keep vacant rooms or garages frost-free. In particular, rooms, conservatories, or basements that are not connected to central heating can be reliably kept warm in this way.     Advantages at a Glance   • Up to 1500 W heating power for clean, condensation-free, and odorless warmth• Large heating element of approximately 55 cm in length• Temperature range adjustable between 0-50 C°• Stepless temperature control• Innovative Window Open Detection• Automatic temperature control / Intelligent heat automation• Frost Guardian Function• Energy-efficient operation thanks to automatic shutdown upon reaching target values• Current room temperature display• Timer Function• Weekly timer• Operating hours display• LCD-Display• Parental controls• Overheat protection• Can be used as a wall or stand device• Frost Guardian Function   Please note • You can find the ErP table for this heating device in the "Documents" section. • The device is only suitable for use in well-insulated rooms or for occasional use. • The selectable temperature does not always correspond to what can be technically achieved. The larger the room and the lower the base temperature in the room, the fewer high temperature targets can be reached. For example, in a well-insulated room of 15 - 20 m², temperature targets of a comfortable 20 - 25°C should be easily achievable, whereas the maximum adjustable target of 50°C is not realistic with 1500 watts of power.    Technical data  heating capacity 1500W Heizart Convention Maximum room size 20 m² (50 m³) temperature range 0 - 50 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 6.5 A Power consumption max. 1500W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter Dimensions W x H x D 690 x 480 x 260 mm (including stand feet) Weight 6kg Protection class IP24 on/off switch and thermostat control and LC-Display and Frost Watch Function and Automatic shutdown at target value and parental controls and Timer yes (one-time, weekly timer, weekday timer) anti-tip device and Open-Window-Detection and guarantee 2 years

Learn more More Fewer

"This heater is suitable for quickly warming seating areas on terraces, in lounges, sports halls, or conservatories, so that the cozy gathering does not come to an abrupt end due to the cold. Thanks to its slim, attractive design, this heater is not only a source of warmth but also integrates decoratively into the room design."     Usable as wall and ceiling heating radiators   A supplied bracket allows for horizontal or vertical mounting of the heater on the wall or ceiling. The 45° swivel joint enables precise alignment of the heat rays to seating or table areas. Additionally, an easy-to-install cable system with quick screw connection is included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself can be done easily with minimal DIY skills.     Feel-good atmosphere at the push of a button   The pleasant infrared heat is immediately noticeable on the skin after switching on. To adjust the heat intensity, the heater has two heating levels of 1100 watts or 2200 watts, which can be set directly on the device or via the included remote control. When mounted on the ceiling, the height is also crucial for how much the space below is heated and how wide the heat rays spread. The lower the height, the warmer and smaller the illuminated area becomes. In lounges, a height of about 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment according to the natural principle of the sun. Unlike devices with heating wires, infrared rays do not warm the surrounding air, but exclusively the surfaces and people they encounter. The irradiated objects (such as furniture, walls, and ceilings) absorb the heat and store it, gradually releasing it back. The objects thus serve as an additional energy and heat storage – even when the device is turned off, which further increases efficiency. The heat radiation creates a pleasant feeling of warm sunlight on the skin in summer.   The high heating level (2200 watts) covers an area of approximately 9 m² in outdoor areas (in cool surroundings) or a maximum of 15 m² in slightly tempered, wind-protected environments.    "In particular, allergy sufferers and people with sensitive airways will find the benefits of infrared heaters to be soothing. The clean and condensation-free instant heat is generated, unlike electric heaters, without dust swirling, disturbing noises, and unpleasant odors."     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-red light, which many people perceive as warm and cozy, but sometimes also as glaring. To prevent the surroundings from being too brightly lit, this heater is equipped with two shortwave infrared tubes featuring light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwave heaters produce a larger proportion of infrared light from the invisible light spectrum. The infrared radiation is bundled through an innovative coating process of the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology, with a lifespan of approximately 6000 hours.   Full heat output at lower brightness: "As the perceivable light is significantly reduced, the immediate surroundings of the heater create the impression of a cozy candlelight atmosphere, and the ambiance is noticeably more pleasant. An already existing lighting concept on the terrace or in the gastronomy is overall less affected."     Advantages at a Glance   • Instant heat without preheating• Uniform and targeted heat distribution• Clean, condensate-free, odorless and noiseless• No dust swirling, therefore suitable for allergy sufferers• 2 heating levels 1100W / 2200 Watts• Remote control• Elegant Design• Weather-resistant aluminum-plastic housing• High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light• Adjustable 45° tilt angle – with a large effective area• Usable in the covered outdoor area• LED display• Operating control light• Suitable for wall and ceiling mounting• Energy efficient     Information video on infrared heaters   Technical data  heating capacity max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W Heizart Shortwave infrared heat waves, low glare tubes effective area 9 - 15 m² Voltage 220 - 240 V/50 Hz rated current consumption max. 9.5 A Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg Protection class IP66 (dust-tight and protected against powerful water jets) Min. distance to flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED-Display and parental controls no Timer no Trotec article number: 1.410.003.215 guarantee 2 years

Learn more More Fewer

This room hygrometer is suitable for humidity-dependent control of the TTK170ECO or other dehumidifiers with a 6.35 mm jack for external connection, for example for unattended drying processes where a target humidity must not be undershot (for instance, with fresh plaster or plastering work) or to reduce power consumption when a too low humidity is not necessary.    The HG 110 features a 6.35 mm jack plug, operates in the low voltage range, and is designed for a maximum load of 2 A. The three-meter long cable allows the measurement point to be different from the location of the dehumidifier.     application examples   It serves as a two-point controller for regulating relative humidity, for example, on indoor construction sites, in basements, in climate cabinets, or for controlled dehumidification of office and computer rooms. Other areas of application include storage for goods or food, cold storage for fruits and vegetables, greenhouses of horticultural businesses, textile industry, paper and printing industry, film industry, hospitals. Wherever humidity needs to be regulated or monitored, this humidity controller with the corresponding dehumidifier can be used.      Functionality and Installation Location   The installation location should be chosen in such a way that a representative measurement of humidity is ensured, i.e., the humidity measurement values at the installation location should correspond to those of the room, and the hygrometer should be in the airflow. The room hygrometer reacts quickly and accurately to changes in humidity. By adjusting the setpoint knob, the lever system is engaged in such a way that when the set humidity is reached, the internal microswitch is activated.     Technical data   Measuring range 40 - 90 % relative humidity Measurement accuracy +-3% suitable ambient temperature 0 - 60° C suitable ambient humidity 40 - 90 % Tension 24 V max. switching load 2 A Cable length 3 Meters connector 6.35 mm jack 1/4" Protection class IP20 guarantee 2 years

Learn more More Fewer

A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

The robust and powerful all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely requires servicing, and is very affordable considering its power and quality."  Easy handling The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat, and continuous operation is also possible. With the used lamella evaporator, target humidities below 40% r.H. are difficult to achieve; however, this technology shows impressive dehumidification power in temperate and humid environments. Particularly useful in larger areas is the high air circulation volume of a substantial 1000 cubic meters per hour. With its stable trolley construction and large wheels, frequent relocation to different sites can be easily carried out.  Bucket, direct hose connection and optional pump kit The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards. "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     For continuous operation on construction sites   The possibility of connecting an external condensate drain – optionally with a condensate pump if needed – makes the construction dryer also ideally suited for longer unattended drying tasks, e.g. in construction drying.     Optional counters The delivery does not include an hour or consumption meter. You can order these from us if desired (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional)• Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % r.H. 55 liters / day air volume 1000 m³/ h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 6.1 A Power consumption max. 1400W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 Liter operating noise 54 dB(A) at 1 m distance 51 dB(A) at a distance of 2.5 m Dimensions L x W x H 530 x 500 x 965 mm (incl. guide bracket) Weight 39 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

Professional construction dehumidifier with large bucket A high-quality dehumidifier for commercial use and water damage drying, manufactured in Europe. Its impressive exterior appearance is matched by its internal values: all electrical components are specially encapsulated, protecting the electronics from harmful deposits that could impair their function and longevity. Therefore, this dryer is also ideally suited for use under demanding conditions. Thanks to its maintenance-friendly design, it is easy to care for. "Compared to more affordable piston compressors, the high-quality 0.58 kW rotary compressor installed here offers the advantage of higher performance with comparatively lower power consumption – and additionally provides reserves for high dehumidification performance even in unheated rooms."In addition, the high-quality hot gas defrosting automatic system ensures a much more efficient dehumidification performance compared to other defrosting devices, without time interval-related defrosting pauses during which no dehumidification takes place.  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).  Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.  User-friendly Thanks to its durable housing, ergonomic grip recesses with an internal grip clip, and four sturdy wheels with a roll stop, the device is ideally suited for use on construction sites and for drying water damage. However, these advantages are also appreciated in commercial spaces or in private basement environments. The storage is also well thought out: two practical stacking grooves on the top of the device allow for a stable and space-saving stacking during transport and in storage.   An integrated operating hour meter reliably documents the exact duration of use even during longer drying operations.   Integrated compressor thermal protection with automatic shut-off   In drying operations with extremely high humidity and simultaneously high temperatures – for example, during water damage restoration – refrigerant dryers quickly enter their red performance zone. Here, the catchy "35 rule" applies: water damage above 35 degrees reduces the dryer’s lifespan to below 35%. However, this is not a question of component quality, but pure physics, which applies independently of the manufacturer to all refrigerant dryers on the market.  While most professional condensate dryers can still operate without issues at moderate humidity around 70% r.F. up to 35 °C, very high humidity combined with high room temperature results in significantly more energy being supplied to the humid air, which must be additionally "processed" through the refrigerant. Consequently, the pressure of the refrigerant in the system increases immensely, leading to a destructive load on the compressor. Although the dehumidifiers will initially continue to operate, they will do so well beyond their limit "deep in the dark red zone," resulting in an extremely shortened remaining lifespan.  "Therefore, the commercial dehumidifiers of the TTK-S series are equipped with an integrated compressor thermal protection for the active preservation of your devices:"Sensors continuously monitor the thermal load of the compressor. If the temperature is within the defined operating range, the integrated heat protection indicator pulses in a long sequence, indicating optimal operation of the dehumidifier. As soon as the temperature exceeds the critical threshold of 35 °C, the automatic system switches off the compressor to protect it, while the fan continues to operate, and automatically reactivates the compressor as soon as the 35° threshold is fallen below again. This protection not only significantly extends the lifespan of the dehumidifiers, but also prevents thermal damage to materials in the room and the building structure during their use.   Options • Dual meter available for additional recording of electricity consumption.• high-performance condensate pump for permanent drying with a pumping capacity of up to 50 m distance and a maximum delivery height of 4 m  Advantages at a Glance • High dehumidification performance even at low temperatures • Maximum dust and moisture protection for all electrical components• Extremely maintenance-friendly design • Optimal handling characteristics • Thanks to the roll piston compressor, it is transportable and storable in any position. • Practical stacking groove for stable, space-saving storage and transport • Multistage capability with identical models• Practice-oriented industrial design• Made in Europe  Technical data  dehumidification performance at 30 °C / 80 % r.H. 28 liters / day air volume 250 m³/ h Maximum room size 70 m² (175 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C moisture range 35 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.3 A Power consumption max. 500W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 375 x 345 x 603 mm Weight 26 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   

Learn more More Fewer

Reliable dehumidifier with solid drying performance This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower-lying drain. The hose must be laid with a downward slope, as no pump is included in the device.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 2-3 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concern.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off•  Hot gas defrosting: faster automatic self-defrosting in cooler environments.   Technical data  dehumidification performance at 30 °C / 80 % r.H. 25 liters / day air volume 215 m³/ h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.4 A Power consumption max. 570W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

What medicine refers to as a "minimally invasive procedure" can also be effectively and purposefully carried out in everyday life: the "examination" using an endoscope. For this, the small camera of the videoscope is inserted into the interior of hard-to-reach cavities, and the filmed content is displayed live and in color on the 3-inch LCD screen.  With this method, it is easy to search for possible damage in technical areas, cable ducts, pipes, or motors, or to carry out regular maintenance inspections – even in operations where the probe is underwater. The advantage is clear: Technical devices do not need to be laboriously disassembled, drywall does not need to be broken open, water circulation systems do not need to be emptied, and cable and pipe ducts do not need to be exposed. Even in the case of pest infestations, this small camera can quickly check where insects and rodents find their shelter.  For professional and private use  Ideal for caretakers, technicians, or home users – when it comes to a reliable and fast endoscopic visual inspection. Whether for indirect optical inspection of concealed machine parts or for insights into cavities accessible only through small openings – the narrow and semi-flexible gooseneck probe with mini-camera has a diameter of only 5.5 mm and is therefore optimal for quick auto inspections or an insightful look into inaccessible tight spots such as gaps, drains, pipelines, or cable conduits. The flexible 95 cm long gooseneck probe can be inserted into small openings, and the four-stage dimmable light from 6 LEDs illuminates the surroundings ideally for high-quality inspection images – even underwater. The LC color display provides razor-sharp photos and videos with a high resolution of 1280 x 720 pixels, and a 3x zoom is available for viewing enlargement. The practical image rotation function of 180° simplifies the display in case the image is shown upside down due to the probe's position.  Suitable for all applications with 3 different attachments. If needed, the tip of the gooseneck probe can also be equipped with a 45° mirror, hook, or magnet attachment, thus expanding its functionality. The included 45° mirror attachment allows for a "view around the corner" or a more precise examination of the object from different perspectives. With the magnet or hook attachment, you can clear or retrieve objects. Thanks to the wireless operation, the device is extremely flexible and user-friendly. For accurate time documentation, the display is equipped with a date and time display. You will receive a complete set including all necessary utensils for immediate use in a practical transport bag. Please note: To store photos and videos, you will additionally need a micro SD card with up to 32 GB of storage.  Compact and fully equipped all-rounder 45° mirror attachment"To be able to conduct a thorough inspection from all sides and different perspectives, a 45° mirror attachment is included in the complete set. This even allows for a view around the corner." Hakenaufsatz"If you have located and identified the missing item or a foreign object using the probe, you can easily retrieve or remove it with the hook attachment. In this way, many a piece of jewelry thought to be lost has come back to light." magnetic attachment"Without the strenuous moving of furniture, screws, nuts, coins, and other iron, nickel, or cobalt-containing metal parts can be easily found or removed from under heavy cabinets and seating sets, or earrings and rings can be quickly and safely located in the drain. Recovery is conveniently done using the practical magnetic attachment on the camera." "Brightness control brings light into the dark""Of course, there are no daylight conditions in cavities, cable ducts, and covered areas. To have a perfect view here as well, the camera is equipped with its own light sources that adequately illuminate the respective environment and provide brilliant photo views. It is equipped with a camera light and a device light." Camera light on the probe headThe camera light, adjustable in 4 brightness levels, provides perfectly illuminated inspection photos and videos with 6 integrated LEDs. device lightOn the back of the handset, there is a device light that can illuminate objects for better viewing. Alternatively, this light source can also be used as a flashlight. Photo and video functionsBrilliant image and photo reproduction with a max. camera resolution of 1280 x 720 pixels. For detailed viewing, you can "freeze" a sequence of images during the ongoing video transmission and examine it more closely as a still image. With the 3x zoom, image sections can be enlarged 1.0x, 1.5x, and 2.0x. If a micro SD card is inserted into the device, all recordings can be saved as photos or videos. Thanks to the practical flip function, the image can be rotated 180°, allowing you to achieve a perfect view in almost any working position.  For universal applications Find faster instead of searching for a long timeWith the .Videoscope, you can conveniently inspect otherwise unreachable areas. This also allows you to quickly find accidentally dropped small parts like screws in the engine compartment or in hard-to-reach machine components, and effortlessly fish them out with the help of the easily attachable hook or magnet attachment. Waterproof immersionAt the tip of the swan neck probe, there is a color image camera head installed that is dust and waterproof according to protection class IP67, with adjustable lighting. Therefore, you can also immerse the probe in water and quickly check whether, for example, unwanted objects are blocking the terrace drain. Check machine condition"Compact machines or devices with a fixed housing cannot be easily opened. To get a glimpse inside the device, simply insert the 5.5 mm narrow gooseneck probe into a suitable opening and gain a comfortable all-around view in the inspection area via the display." The quick car inspection"Even without completely disassembling the engine block, you want to know where the leak is from which water is dripping onto the floor, which cable the marten has torn out, or where there is an obvious line defect. Simply turn on the device, insert the probe, and check the position via the display." Finding unwanted roommatesInsects or mice like to inhabit the literally farthest corners of the attic or basement. Other pests like ants also like to spread out harmfully in wall cavities. Now you can comfortably search for the pests and their nests or droppings without having to carry out extensive demolition work or even remove wall, ceiling, or floor coverings.  Advantages at a Glance • 3 inch digital LCD color display• 95 cm long, semi-flexible and bendable gooseneck probe (Ø 5.5 mm)• Waterproof according to protection class IP67 (gooseneck probe and camera head) for underwater use• Including 3-piece accessory set with 45° mirror, hook, and magnet attachment• Still image, photo, and video mode• High-quality camera with a resolution of 1280 x 720 px• Taking photos and videos - can also be stored with an inserted micro SD card of up to 32 GB• 6-fold LED light on the camera head with 4 brightness levels• LED light in housing (flashlight function)• Compact probe unwinding• Flip function for 180° image rotation• 3x zoom• Depth of field 1 cm to 30 cm, field of view 65°• Date and time display• Robust construction• Wireless battery operation for mobile, independent use• Battery status display• Including 4 x Alkaline LR6 AA batteries, 1.5 V• Protective transport bag• Simple intuitive operation  scope of delivery  • measuring device• mirror adapter• Magnetadapter• Hakenadapter• Batteries• Carrying case• User manual     Technical data   Display Color display, 3 inch LCD (640 x 480 pixels) memory SD card 32 GB max. (optional) file formats JPG (Photo) + AVI (Video) Dimensions H x W x D 162 x 85 x 35 mm Weight 385g Protection class IP67 Power supply 4 x AA batteries (included) Ambient temperature -10 °C to +60°C Trotec article no. 3.510.009.122 guarantee 2 years

Learn more More Fewer

This two-pole tester is the optimal measuring device for electricians and ambitious DIY enthusiasts. Built and tested according to strict standards, equipped with many professional features, and thanks to protection class IP64, it is also perfectly suited for the tough practical everyday use.   "Voltage tests, optical and acoustic continuity tests, two-pole rotating field tests, and single-pole tests for phase determination are possible."   Despite its wide range of functions, the device is quick and easy to operate. Due to its ergonomic design and lightweight, it fits well in the hand and provides the user with additional safety through the switchable measurement point lighting for work in dark environments.     Advantages for Practice   • Single-pole testing for phase determination without counter potential• Versatile two-pole voltage tester for measuring direct or alternating voltage, polarity, and phase rotation.• Optical and acoustic pass-through testing• Voltage display even with empty batteries• Automatic shutdown• Integrated flashlight for measuring point illumination• Optimal price-performance ratio• Automatic function test• Impact-resistant, dustproof, and splash-proof housing     scope of delivery  • measuring device• Batteries• User manual    Technical data   Messkreis category CAT III 600 V Measuring range 12-690 VDC and 12-400 VAC Measurement range pass-through test  Direct and Alternating Current  automatic detection Protection class IP64 voltage display  LED bar display Prüfart two-pole contact measurement Features       • optical and acoustic passage indicator • Polarity test • Direction of rotation indicator • Option for single-pole phase testing •  automatic shutdown • integrated flashlight for measuring point illumination   insulation Protection Class II, double insulation temperature range 0 °C to 50 °C Security EN 61326, EN 61010-1, EN 61010-02-031 battery type 2 x 1.5 V, IEC LR03 Masse (L x B x H) 240 x 78 x 40 mm Weight 237 g Trotec article no. 3.510.205.230 guarantee 2 years

Learn more More Fewer

This easy-to-use handheld measuring device is part of the basic equipment for every home and craftsman. The practical quick measuring device reliably detects voltage sources from just 5 volts up to 1000 volts, or from 50 Hz to 400 Hz. On the side of the voltage detector, the sensitivity can be adjusted continuously using a rotary knob. This allows you to finely pre-adjust the measurement range to the expected voltage. It is ideal for situations where you want to find a cable break or to determine the presence of alternating current in fuses, open wires, cable reels, junction boxes, sockets, switches, and hidden wall cables.  Quick and reliable voltage testing – even in dark areas Due to the capacitive measurement method, it is sufficient for the current voltage detector to approach the conductor – the detector warns you contactlessly and quickly with a red flashing LED across the entire detector tip. Additionally, an acoustic warning signal sounds. The compact voltage detector in pen form is equipped with a built-in, switchable LED light in the measuring head, which allows you to work safely and accurately even in poor lighting conditions. "Whether attached via clip in the shirt, jacket, or trouser pocket – with the handy detector, you always have a reliable testing device for quick voltage detection at your fingertips."  Advantages at a Glance • Fast and contactless detection of alternating current• Voltage range 5 V – 1000 V AC / 50 Hz – 400 Hz• Protection class CAT IV 1000 V• Optical and acoustic alarm when voltage is present• Continuous adjustment of measurement sensitivity• Compact design in pen shape with pocket clip• Integrated LED light for work even under unfavorable lighting conditions• Optimal price-performance ratio  scope of delivery • measuring device• Batteries• User manual  Technical data  Messkreis category CAT IV (1000V) measuring range V/AC 5 and 1000 V Vicinity Degree of contamination 2 Protection class IP20 voltage display  LED Features       • non-contact measurement of alternating voltage (without galvanic contact) • acoustic alarm • optical alarm • integrated light display humidity range max. 85 % r.F. temperature range 0 °C to 40 °C Security   EN 61610-1:2010, EN 61610-2-033:2012 EN 61326-1:2013, EN 61326-2-2:2013 battery type 2 x 1.5V, AAA Masse (L x B x H) 154 x 32 x 28 mm Weight 50 g Trotec article no. 3.510.205.217 guarantee 2 years

Learn more More Fewer