This room hygrometer is suitable for humidity-dependent control of the TTK170ECO or other dehumidifiers with a 6.35 mm jack for external connection, for example for unattended drying processes where a target humidity must not be undershot (for instance, with fresh plaster or plastering work) or to reduce power consumption when a too low humidity is not necessary.    The HG 110 features a 6.35 mm jack plug, operates in the low voltage range, and is designed for a maximum load of 2 A. The three-meter long cable allows the measurement point to be different from the location of the dehumidifier.     application examples   It serves as a two-point controller for regulating relative humidity, for example, on indoor construction sites, in basements, in climate cabinets, or for controlled dehumidification of office and computer rooms. Other areas of application include storage for goods or food, cold storage for fruits and vegetables, greenhouses of horticultural businesses, textile industry, paper and printing industry, film industry, hospitals. Wherever humidity needs to be regulated or monitored, this humidity controller with the corresponding dehumidifier can be used.      Functionality and Installation Location   The installation location should be chosen in such a way that a representative measurement of humidity is ensured, i.e., the humidity measurement values at the installation location should correspond to those of the room, and the hygrometer should be in the airflow. The room hygrometer reacts quickly and accurately to changes in humidity. By adjusting the setpoint knob, the lever system is engaged in such a way that when the set humidity is reached, the internal microswitch is activated.     Technical data   Measuring range 40 - 90 % relative humidity Measurement accuracy +-3% suitable ambient temperature 0 - 60° C suitable ambient humidity 40 - 90 % Tension 24 V max. switching load 2 A Cable length 3 Meters connector 6.35 mm jack 1/4" Protection class IP20 guarantee 2 years

Learn more More Fewer

Moisture Meter TFA Contactfor the detection of moisture in walls, ceilings, and floors. The electronic moisture indicator TFA Contact with non-destructive measurement method based on the dielectric constant/high-frequency measurement operation is an affordable, easy-to-use measuring device for quick detection of moisture. It features a digital LCD display and a flexibly usable ball probe for non-destructive detection of moisture in building materials of all kinds as well as for identifying moisture distribution in walls, ceilings, and floors.In terms of type and handling, it is very similar to the Gann Hydromette Compact B. For a quick overview of the moisture level and for detecting water damage even measured at depth, it is absolutely sufficient. The price difference compared to the Gann device mainly lies in the measurement depth (4cm for TFA Contact compared to up to 6cm for Gann) as well as in the detailed measurement in the very wet range, where the TFA Contact already shows 100% moisture at "practically fully wet," while the Gann moisture meter still differentiates in this area. A simple example: when measuring through a PET bottle, the TFA Contact shows 100% moisture while the Gann Hydromette recognizes the thin PET wall and displays a slightly lower value according to the plastic thickness.  Features of TFA Contact Moisture Meter: - shock-resistant plastic- Sensor type metal spheroid- Penetration depth 20 - 40 mm- Switchable LCD backlight- Auto-off function- The measuring principle is the electrical resistance in the material.- Moisture measurements of concrete, brick walls, plaster, mortar, etc.- Max-Min Function- Hold Function- Moisture measurements without damaging the surface2 year guarantee Technical data   Messbereiche: 0 - 100 digitsResolution: 1 digitPenetration depth: 20 - 40 mmMessprinzip:Device Calibration: Capacitive (Electrical Resistance)manual calibrationSensor type: Metal spheroidDisplay: LCD ScreenPower supply: 1 x 9 V block batteryDimensions (H/W/D):      200 x 48 x 34 x mmWeight: 150 gr.Warranty: 2 years

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

What medicine refers to as a "minimally invasive procedure" can also be effectively and purposefully carried out in everyday life: the "examination" using an endoscope. For this, the small camera of the videoscope is inserted into the interior of hard-to-reach cavities, and the filmed content is displayed live and in color on the 3-inch LCD screen.  With this method, it is easy to search for possible damage in technical areas, cable ducts, pipes, or motors, or to carry out regular maintenance inspections – even in operations where the probe is underwater. The advantage is clear: Technical devices do not need to be laboriously disassembled, drywall does not need to be broken open, water circulation systems do not need to be emptied, and cable and pipe ducts do not need to be exposed. Even in the case of pest infestations, this small camera can quickly check where insects and rodents find their shelter.  For professional and private use  Ideal for caretakers, technicians, or home users – when it comes to a reliable and fast endoscopic visual inspection. Whether for indirect optical inspection of concealed machine parts or for insights into cavities accessible only through small openings – the narrow and semi-flexible gooseneck probe with mini-camera has a diameter of only 5.5 mm and is therefore optimal for quick auto inspections or an insightful look into inaccessible tight spots such as gaps, drains, pipelines, or cable conduits. The flexible 95 cm long gooseneck probe can be inserted into small openings, and the four-stage dimmable light from 6 LEDs illuminates the surroundings ideally for high-quality inspection images – even underwater. The LC color display provides razor-sharp photos and videos with a high resolution of 1280 x 720 pixels, and a 3x zoom is available for viewing enlargement. The practical image rotation function of 180° simplifies the display in case the image is shown upside down due to the probe's position.  Suitable for all applications with 3 different attachments. If needed, the tip of the gooseneck probe can also be equipped with a 45° mirror, hook, or magnet attachment, thus expanding its functionality. The included 45° mirror attachment allows for a "view around the corner" or a more precise examination of the object from different perspectives. With the magnet or hook attachment, you can clear or retrieve objects. Thanks to the wireless operation, the device is extremely flexible and user-friendly. For accurate time documentation, the display is equipped with a date and time display. You will receive a complete set including all necessary utensils for immediate use in a practical transport bag. Please note: To store photos and videos, you will additionally need a micro SD card with up to 32 GB of storage.  Compact and fully equipped all-rounder 45° mirror attachment"To be able to conduct a thorough inspection from all sides and different perspectives, a 45° mirror attachment is included in the complete set. This even allows for a view around the corner." Hakenaufsatz"If you have located and identified the missing item or a foreign object using the probe, you can easily retrieve or remove it with the hook attachment. In this way, many a piece of jewelry thought to be lost has come back to light." magnetic attachment"Without the strenuous moving of furniture, screws, nuts, coins, and other iron, nickel, or cobalt-containing metal parts can be easily found or removed from under heavy cabinets and seating sets, or earrings and rings can be quickly and safely located in the drain. Recovery is conveniently done using the practical magnetic attachment on the camera." "Brightness control brings light into the dark""Of course, there are no daylight conditions in cavities, cable ducts, and covered areas. To have a perfect view here as well, the camera is equipped with its own light sources that adequately illuminate the respective environment and provide brilliant photo views. It is equipped with a camera light and a device light." Camera light on the probe headThe camera light, adjustable in 4 brightness levels, provides perfectly illuminated inspection photos and videos with 6 integrated LEDs. device lightOn the back of the handset, there is a device light that can illuminate objects for better viewing. Alternatively, this light source can also be used as a flashlight. Photo and video functionsBrilliant image and photo reproduction with a max. camera resolution of 1280 x 720 pixels. For detailed viewing, you can "freeze" a sequence of images during the ongoing video transmission and examine it more closely as a still image. With the 3x zoom, image sections can be enlarged 1.0x, 1.5x, and 2.0x. If a micro SD card is inserted into the device, all recordings can be saved as photos or videos. Thanks to the practical flip function, the image can be rotated 180°, allowing you to achieve a perfect view in almost any working position.  For universal applications Find faster instead of searching for a long timeWith the .Videoscope, you can conveniently inspect otherwise unreachable areas. This also allows you to quickly find accidentally dropped small parts like screws in the engine compartment or in hard-to-reach machine components, and effortlessly fish them out with the help of the easily attachable hook or magnet attachment. Waterproof immersionAt the tip of the swan neck probe, there is a color image camera head installed that is dust and waterproof according to protection class IP67, with adjustable lighting. Therefore, you can also immerse the probe in water and quickly check whether, for example, unwanted objects are blocking the terrace drain. Check machine condition"Compact machines or devices with a fixed housing cannot be easily opened. To get a glimpse inside the device, simply insert the 5.5 mm narrow gooseneck probe into a suitable opening and gain a comfortable all-around view in the inspection area via the display." The quick car inspection"Even without completely disassembling the engine block, you want to know where the leak is from which water is dripping onto the floor, which cable the marten has torn out, or where there is an obvious line defect. Simply turn on the device, insert the probe, and check the position via the display." Finding unwanted roommatesInsects or mice like to inhabit the literally farthest corners of the attic or basement. Other pests like ants also like to spread out harmfully in wall cavities. Now you can comfortably search for the pests and their nests or droppings without having to carry out extensive demolition work or even remove wall, ceiling, or floor coverings.  Advantages at a Glance • 3 inch digital LCD color display• 95 cm long, semi-flexible and bendable gooseneck probe (Ø 5.5 mm)• Waterproof according to protection class IP67 (gooseneck probe and camera head) for underwater use• Including 3-piece accessory set with 45° mirror, hook, and magnet attachment• Still image, photo, and video mode• High-quality camera with a resolution of 1280 x 720 px• Taking photos and videos - can also be stored with an inserted micro SD card of up to 32 GB• 6-fold LED light on the camera head with 4 brightness levels• LED light in housing (flashlight function)• Compact probe unwinding• Flip function for 180° image rotation• 3x zoom• Depth of field 1 cm to 30 cm, field of view 65°• Date and time display• Robust construction• Wireless battery operation for mobile, independent use• Battery status display• Including 4 x Alkaline LR6 AA batteries, 1.5 V• Protective transport bag• Simple intuitive operation  scope of delivery  • measuring device• mirror adapter• Magnetadapter• Hakenadapter• Batteries• Carrying case• User manual     Technical data   Display Color display, 3 inch LCD (640 x 480 pixels) memory SD card 32 GB max. (optional) file formats JPG (Photo) + AVI (Video) Dimensions H x W x D 162 x 85 x 35 mm Weight 385g Protection class IP67 Power supply 4 x AA batteries (included) Ambient temperature -10 °C to +60°C Trotec article no. 3.510.009.122 guarantee 2 years

Learn more More Fewer

The UNI 1 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected. It can measure the ranges of building moisture, air humidity, and temperature.'The UNI1 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'   • B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.• MB 35 for surface moisture measurement on concrete• MH 34 for measuring high moisture values (40–200%) in softwood• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and• all Pt 100 temperature sensors"We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.Characteristics• Handy quick moisture meter for lightning-fast single and series measurements• Direct display of moisture values on the large LCD display, resolution: 0.1 digit• Quick measurement of moisture in set building materials using the capacitive high-frequency measurement method• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology• Fully automatic device synchronizationscope of delivery The delivery includes the base station Uni1 without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data  Gann Article No.: 30001430 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V-Block battery (included in delivery) or Ni-Cd battery (special accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Learn more More Fewer

Das Gann Hydromette BL H 40 ist ein präzises, widerstandsbasiertes Holzfeuchte-Messgerät für Schreiner, Parkettleger und Maler. Es misst Holzfeuchte von Schnittholz (bis 180 mm), Spanplatten und Furnieren – ideal für die Kontrolle vor und nach der Verarbeitung. Die integrierte Holztemperatur-Kompensation passt den Messwert automatisch an die Objekt-Temperatur an (-10 bis +40 °C), was für höchste Genauigkeit sorgt. Ihre Vorteile auf einen Blick: Präzise: Hochwertiger Messverstärker mit 0,1 % Auflösung. Vielseitig: 7-stufige Korrektur für über 300 Holzarten. Praktisch: Min-, Max- und Hold-Funktion, Speicherung der letzten 5 Werte. Sofort einsatzbereit: Lieferung mit 9-V-Batterie. Kompakt: Handliches Format (175 x 50 x 30 mm, 160 g). Sicher: 2 Jahre Garantie. Beim hier angebotenen Gerät handelt es sich um das Basis-Messgerät ohne Zubehör. Für die Anwendung ist folgendes Zubehör erforderlich:• Messkabel MK8• Einschlag-Elektrode M20 mit Elektrodenspitzen• Bei Bedarf Bereitschaftskoffer, z.B. BK 14-I oder BK-II Dokumente / Downloads   Bedienungsanleitung Deutsch  User Manual English  Mode d'emploi Français  Manuale Operativo Italiano

Learn more More Fewer

The active electrode RFT 28 EL is a sensor for measuring air humidity and air temperature with a fast measurement speed. It is an addition to one of the Gann-Hydromette base stations listed below and cannot be operated independently of them.The fast response speed of the sensor allows for the detection of leaks, e.g. door gaps or leaky windows, as even slight air currents can influence the measurement display. The sensor also adapts to the ambient climate even when switched off. For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out.    Suitable base devices  The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2   The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data Gann Article No.: 31003155Measuring range humidity: 7 - 98 % r.H.Measuring range air temperature: -10 - +80 °CMeasurement tolerance humidity: ± 1.8 % (at 10-90% r.H.)Measurement tolerance air temperature: ± 0.75 °C (-10 to +55 °C) The response time of the air humidity sensor (slightly moving air, ambient temperature: 20 - 25 °C) is 20-30 seconds depending on the humidity difference.Warranty: 2 years  

Learn more More Fewer

The active electrode B 50 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds. It detects the moisture distribution in ceilings, walls, concrete, and other set building materials.   The following measurement ranges are covered by the B 50• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via tableSuitable base devicesThe electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in dealing with moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a supplement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 31003750 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

The active electrode B 60 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds."It detects the moisture distribution in ceilings, walls, concrete, and other set building materials. The basic function is the same as that of the probe B50; additionally, the B60 features a built-in limit value setter from 20 – 140 digits and an acoustic signal generator."   The following measurement ranges are covered by the B 60• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via table Suitable base devices The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 31003760 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

Fast, precise moisture meter for detecting moisture in walls, ceilings, and floors. With this easy-to-use pocket-sized quick moisture indicator, you can quickly and reliably track your drying progress on construction sites or during the remediation of water damage.The electronic moisture indicator operates using a non-destructive measurement method based on the dielectric constant/high-frequency measurement principle. It has a spherical probe for detecting moisture and moisture distribution in solid building materials such as walls, ceilings, and floors (suitable for measuring wood only to a limited extent and as an indicator).Application"First, the desired material is selected on an LCD display and saved by pressing a button. Then, the metal ball is held at a right angle to the material to be measured, and the measurement button is pressed briefly. The result is immediately visible."   Handling of a ball measuring electrode  It is important to have a 90° angle to the measurement object as well as the correct positioning of the hydrometer/electrode. To avoid any influence from the hand of the person measuring, the electrode may only be covered by the hand on the rear half during the measurement and control process. The front half (display/sphere) of the device must remain free.       Proper handling of the device: Always hold the device firmly at the lower part of the housing during measurements:     Incorrect handling of the device: When measuring, the hand affects the measurement field of the ball electrode and thereby alters the measurement value.      Selectable Material Table• Display in digits• Cement screed in weight %• Anhydrite content in weight %• Concrete in % by weight• Cement mortar in weight %• Lime mortar in weight %• Mischputz in Gew %• Gypsum plaster in % by weight• Cement screed in CM %• Anhydrite screed in CM %• Gipsputz in CM %• Lime mortar in CM %• Cement mortar in CM %• Mixed plaster in CM %• Beton in CM % Weight %: The material moisture in weight percentages (also solid moisture) indicates the absolute proportion of free water contained in a solid in %. Values in the range of 0.2 - 0.3 % indicate dry materials.CM %: The displayed CM value simulates the extraction and measurement of a material sample in the manometer, where the sample is mixed with calcium carbide. This produces a gas, the pressure of which is measured. Depending on the material density, the value is very similar to weight %. For anhydrite, 1 weight % = about 1 CM%. For concrete floors, the CM value deviates more significantly: 1 weight % = about 1.5 CM%. Dry concrete floors/walls should have CM values below 2.0% (calcium sulfate or anhydrite screed: below 0.3%).Thus, the weight percentages are the more easily understandable value for non-specialists.Advantages and Features• Handy moisture meter in pocket format for quick individual and series measurements• For each building material, a limit value can be individually set, exceeding which an acoustic warning signal will sound.• Scan mode (1 - 199.9 digits) or direct display of moisture values in % by weight or CM-% for building materials, resolution: 0.1 %• Characteristic curves for 7 types of building materials• Min, Max, and Hold function for the measured values• Automatic calibration when the device is turned on• The device is delivered complete with a 9V battery and plastic box.Improvements compared to the previous Hydromette BL Compact BThe BL2 is the further development of its predecessor Gann Hydromette BL Compact B.• Longer measuring probe for more comfortable application• Significantly stronger high-frequency measurement field for greater penetration depth into the building material• Finer measurement resolution now from 0-199 digits for an even more precise delineation of moist areas, which was previously only possible with significantly more expensive measuring devices.• the direct display of the CM % has been expanded to include several building materials. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 30012032 Measuring range:   0 – 199.9 Digits (Scan Range) 0.3 – 6.0 wt.-% or 0.3 – 4.0 CM-% measuring depth: max. approx. 6 cm Advertisement: Device/ambient temperature Trend indicator: hardwood and softwood Max-Hold function: Yes Alarm function: Acoustically Calibration: Automatically Device shutdown: Automatically Single or series measurements: In seconds Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 190 x 50 x 30 mm Weight: 180 gr. Special features: No separate electrodes or cables required Ideal pre-testing device for all CM devices Guarantee: 2 years                      Further Gann measuring devices "We are an official sales outlet for Gann measuring devices in Switzerland and can offer you all Gann articles under advantageous conditions, for example: Gann Hydromette HB30, HT65, HT85 T, UNI1, UNI2, RTU600, CH17 and many more."

Learn more More Fewer

The UNI 2 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected, similar to the smaller model UNI1. Additionally, all construction moisture measuring electrodes that are based on the resistance measuring principle can be connected.The following measurement ranges can be determined.• building moisture• Humidity• Air temperature• Material temperature• Surface temperature'The UNI2 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'• B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.• MB 35 for surface moisture measurement on concrete• MH 34 for measuring high moisture values (40–200%) in softwood• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and• all Pt 100 temperature sensors.   "We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.Measuring ranges   building moisture: in resistance-based measurements: (*)0 - 80 Digits0.3 - 25 wt.% or 0.3 - 12 cm.%   in capacitive measurements: (*)0 - 199 Digits (Scan Area)0.3 - 8.5 wt.% or 0.3 - 6.5 CM-% with B 50, B 60 and LB 702 - 8 wt.-% with MB 35 on concrete surfaces   when measuring the relative humidity in the borehole: (*)5 - 98 % RH or0.2 - 3.7 wt.% with RH-T 37 EL and RH-T 37 EL flex   (wood moisture):40 - 200 % (atro) with MH 34 on softwood   Humidity: 5 - 98 % r.H. with RF-T 28, RH-T 37 EL and RH-T 37 EL flex   Temperature: -200 - +600 °C depending on Pt 100 temperature sensor   Infrared measurement range: -20 - +199.9 °C with IR 40 EL (*) = Moisture conversion in % depending on building material via conversion table   The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.Characteristics• Handy quick moisture meter for lightning-fast single and series measurements• Direct display of moisture values via the large LCD display, resolution: 0.1 digit• Quick measurement of moisture in set building materials using resistance and capacitive high-frequency measurement methods.• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology• Fully automatic device synchronizationscope of deliveryThe package includes the base station Uni2 without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 30001550 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V-Block battery (included in delivery) or Ni-Cd battery (special accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Learn more More Fewer

The RHT 37 BL 160 is an electrode for measuring air humidity and air temperature - specifically suitable for use in bulk materials and solids (e.g. masonry or screeds). Its areas of application include moisture analysis, damage assessment, monitoring of construction drying, as well as testing the readiness for installation of floor and wall coverings.The sensor tube has a diameter of 5.5 mm, which also allows measurements in joints without having to risk damaging wall or floor tiles. "In conjunction with a hydrometer, the air humidity in the borehole can be measured and the degree of saturation or moisture content of certain set building materials can be determined using sorption isotherms." "For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out."Suitable base devicesBL UNI 11CH17

Learn more More Fewer

Das HB 30 ist ein vielseitiges elektronisches Gerät zur Messung der Feuchtigkeit in Holz- und Baumaterialien. Es nutzt das Widerstands-Messprinzip, um hochpräzise Ergebnisse für verschiedene Holzprodukte, darunter Schnittholz bis 180 mm Dicke, Spanplatten und Parkett, sowie für abgebundene Baustoffe zu liefern. Alle gängigen Holzarten können gemessen werden. Für Anwendungen im Bereich der Baufeuchte (z.B. in Estrichen, Mörtel, Putzen, Beton, Ziegeln, Isolier- und Dämmstoffen) bietet die HB 30 einen doppelten Ansatz: kapazitive und Widerstands-Messverfahren. Dies ermöglicht sowohl die zerstörungsfreie Feuchtigkeitserkennung als auch die Erstellung von detaillierten Feuchteprofilen an spezifischen Interessenspunkten. Darüber hinaus verfügt die HB 30 über einen integrierten Infrarot-Sensor zur bequemen Oberflächentemperaturmessung. Dies macht sie zu einem äusserst geeigneten Werkzeug für Fachleute wie Parkettleger, Innenarchitekten und Tischler. Besondere Merkmale Handliches Feuchtemessgerät für schnelle Einzel- und Reihenmessungen mit hochwertigem Messverstärker Direkte Anzeige der Holzfeuchte in % über die grosse LCD-Anzeige, Auflösung: 0.1 % Holzfeuchte-Messung: Kennliniengruppen 2 und 3 sind im Messgerät enthalten, basierend auf der 4-Stufen-Holzsortenkorrektur Das Gerät wird mit 9-V-Batterie ausgeliefert  Technische Daten Länge 14 cm Breite 9 cm Höhe 5 cm Gewicht 0.23 kg Beim hier angebotenen Gerät handelt es sich um das Basis-Messgerät ohne Zubehör. Für die Anwendung ist folgendes Zubehör erforderlich:• Messkabel MK8• Elektroden und Fühler• Bei Bedarf Bereitschaftskoffer, z.B. BK 14-I oder BK-IIWeitere Details dazu finden Sie auch auf der >> Herstellerseite Dokumente / Downloads   Bedienungsanleitung Deutsch  User Manual English  Mode d'emploi Français  Manuale Operativo Italiano

Learn more More Fewer