The Dryfix "HotAirStopper" and "HotAirStopper XL" are practical accessories for mobile air conditioning units. They simply and reliably seal the window opening required for the passage of the exhaust hose from mobile air conditioning units. This window seal prevents heat from outside on one hand, and the expelled warm air from the air conditioning unit itself from flowing back into the room on the other hand. As a side effect, it keeps mosquitoes and other unwanted insects away. Ultimately, the solution also saves energy: the efficiency of the air conditioning unit is significantly increased because the heat load in the room is reduced.Function principle and assemblyThe Dryfix "HotAirStopper" consists of a roll of hook-and-loop tape that is adhesive on one side, as well as a cloth made of durable special fabric. Incorporated into the cloth is a zipper with two opposing zippers, which allows the exhaust hose to be fixed at the appropriate height from both sides in the window opening. The installation is comparably simple, like attaching a mosquito net: the hook-and-loop strip is glued along the three open sides of the window itself and the window frame. The cloth can then be easily attached with the hook-and-loop. A corresponding installation manual is included in the delivery. By the way, the windows can still be closed even when the cloth is mounted. Ideally, the cloth should not be stretched too tightly over the corners. Calculation window cycleThe standard version fits all common casement or tilt windows, whose three open sides do not exceed a total measurement of 400 cm. Only with us can you also get an XL version for a total measurement of 600 cm (surcharge +CHF 10.-) while supplies last.Calculation of total mass, example tilt window: (2 x window height) + (1 x width)Calculation of total mass, example wing window: (1 x window height) + (2 x width)Advantages and Features• Easy assembly with Velcro tape• Lower room temperature possible• more pleasant sleep without mosquitoes• No ingress of exhaust air and moisture• Window can be opened and closed• Energy-saving and water-repellent• Also suitable for roof windows that can be opened on one side (not for roof windows that rotate around an axis)   questions and answersWhich windows does the system work on?For all common tilt-and-turn windows in old and new buildings, as well as for installable skylights. Ideal are plastic or metal windows. With older, painted wooden windows, some paint may come off when removing the adhesive tape (similar to a mosquito net).  Can I also use the system on my balcony door?Yes. If you open the door as a wing, the standard version is sufficient. If the balcony door is tilted, the XL version fits.Is the cloth machine washable?Yes, up to 40°, e.g. wash program "easy care"   Which air conditioning/extraction devices is the system compatible with?With all devices that have a flexible exhaust hose, also with the mobile split air conditioning units "Ulisse" from our range.

Learn more More Fewer

Wall console, suitable for a variety of smaller dehumidifiers from our range, for example to:Dryfix Royal, Foxy F12 + X3, Airsec3000, Lübra LDH626L + WDH101pro, Akto930, WDH-416S/725DG, Optimo20 etc.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate. execution40.5 cm inner width / 41.5 cm outer widthSteel sheet white powder-coated or light gray powder-coated Scope of delivery:- Wall mount made of sheet steel- 2 screws/anchors for wall mounting   Technical data Dimensions (Height x Width x Depth): 25 x 41.5 x 30 cmWeight: 1.5kgLochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mmload capacity up to 16 kgLarger versionfor larger or heavier dehumidifiers, please also refer to our bracket for large devices.

Learn more More Fewer

Rack for dehumidifiers and mobile air conditioning units. The rack is ideally suited for:• if a larger bucket is to be placed under a dehumidifier, e.g. during a longer absence on vacation, or • for the increase of mobile air conditioning units with a hose, when the air hose is not long enough to reach a window for venting the warm air.The rack is made of metal pipes (powder-coated white), has a stable stand even when loaded, and sufficient load capacity for dehumidifiers weighing up to 50 kg. The two support plates are bent upwards at the sides, so that the device cannot roll away. The open space in the middle has a width of approximately 17.5 cm and can be used for the passage of a hose. Accordingly, the rack can be used for all devices that have a minimum distance of 17.5 cm between the wheels. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Fits all mobile air conditioning units from our range except for "PAC 3900 X", "Orion Plus" and "70m3".     Technical data   Height (Top Edge of Carrying Handle): 56 cmHeight of the stand platform: 50 cmWidth outside: 47 cmWidth of the stand platform (=max. device width): 45 cmDepth: 38 cmWeight: 5kg

Learn more More Fewer

Exclusively with us!The X-Tank Basic is an additional bucket for wall-mounted dryers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow. The X-Tank Basic can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the flat rack with scale, including power cable and matching 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.The X-Tank was developed by us (Patent CH709716) and is exclusively available from us.    scope of delivery plug-and-play device including matching 20-liter bucket   Technical data Mass HxWxD: 180 x 480 x 390 mm (Dimensions without bucket) Weight: 7 kg Material: Metal white powder-coated connection cable: 2m with 3-pole Swiss plug (fits into standard household socket) Guarantee: 2 years

Learn more More Fewer

Exclusively with us!The X-Tank Top is an additional bucket for mobile dehumidifiers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow.The X-Tank top can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the stand rack with scale, including power cable and a suitable 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand.4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Scope of delivery: ready-to-use device including matching 20-liter bucketThe X-Tank was developed by us and is exclusively available from us.   warranty 2 yearsCustomer opinions on the X-Tank:"...The X-Tank with hose arrived yesterday, the installation was problem-free. We are very satisfied..." Technical dataheight 56 cmWidth 48 cm, max. device width 44.5 cmdepth 39 cmWeight 8 kgLoad capacity max. 40 kgConnection cable 2m with Swiss plug (220V/standard household socket) 

Learn more More Fewer

Dryfix Alu connection rails for clotheslines The Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers):0.95 m (for 7 line lanes) Fr. 28.00 / each.1.10 m (for 8 line lanes) Fr. 32.00 / pc.Rail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also check out our complete sets   Dryfix Alu connection rails for clotheslinesThe Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers): Rail widths:0.95 m for 7 line lanes1.10 m for 8 lane tracksRail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also note our complete sets    Technical data   Dimensions (H/D): 3cm/3cm Strength: 3mm     Width: Weight: 0.95m   512g  

Learn more More Fewer

Wall console made of galvanized steel (rustproof), with stabilization support. Length 63 cm, 5-fold drilled for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 59 cm from the wall (depending on the chosen clothesline system)."ceiling telescopeIf the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 60cm and cannot be changed. With a ceiling height of 2.45 m, this results in exactly the standard height of the laundry lines of 1.85 m.As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 5 tracks, for example for bed linen, etc. Please also refer to our junior line complete sets.Technical data Material: galvanized metal, rustproofBase dimensions: 18 x 18 cm, 4-fold drilled (10 mm diameter)Length from wall total: 63 cmDistance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Connection rails Dryfix Vario MetalThe Dryfix connection rails made of very sturdy, galvanized metal are available in various lengths and are suitable both for wall-to-wall systems and when you mount the rails on ceiling or wall supports. The glide rollers are already fully assembled at the recommended distance of 15cm.Available rail widths:Rail width 0.78 m perforation every 15 cmfor: 6 lanesRail width 1.08 m perforation every 15 cmfor: 8 lanesRail width 1.23 m perforation every 15 cmfor: 9 lanesRail width 1.53 m perforation every 15 cmfor: 11 lanes/15cmRail width 1.83 m perforation every 15 cmfor: 13 lanesRail width 2.28 m perforation every 15 cmfor: 16 lanesRail thickness: 4mm-> Also note our complete setsFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels. Technical data  Dimensions (Depth / Height): 3.4cm / 3cmThickness: 4 mm   Width:0.78m1.53m2.28m   Weight: 1.39 kg 2.76 kg 4.10 kg

Learn more More Fewer

Wall console made of galvanized steel (rust-free), with stabilization support. Length 100 cm, 8-fold perforated for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 96 cm from the wall (depending on the chosen clothesline system)."ceiling telescope'If the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 100cm and cannot be changed. With a ceiling height of 2.85 m, this results in exactly the standard height of the laundry lines of 1.85 m.'As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 8 tracks, for example, for bed linen, etc. Please also refer to our junior line complete sets.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation:     Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend the 2 pieces up to 1.50 m rail width (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems   "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems   "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer