This powerful heater (1200-2400 W) is ideally suited for quickly warming limited areas. It is therefore perfect for seating areas, workspaces, patios, conservatories, and also for rapid construction drying. The delivery includes both the large tripod and a wall mount.The 240GT is technically state-of-the-art. It has been developed from the proven know-how of earlier models and enhanced with the latest technology. The "golden tubes" (Golden Tubes) have a seconds-fast warm-up phase and a good deep heat effect. The Golden Tubes also dim after a few seconds, which significantly lessens the impact of ambient light compared to conventional infrared heaters.Complete delivery scope for free-standing installation and wall mounting:The tripod consists of a solid metal base and a 3-part screwed tube, allowing the desired height to be selected between approximately 0.60m, 1.25m, and 1.94m. Additionally, the tilt angle of the spotlight head is adjustable, so that the heat can be optimally directed to the desired area. Wall mounting is also possible. The corresponding bracket is included in the delivery.Easy to use:The heater can be controlled both at the heating head itself and via the included remote control. By pressing a button or using the remote control (included in the package), the desired heating power of 1000/2000W is selected.Properties of this infrared heater:? Two "Golden Tube Heating Tubes" that are currently among the highest quality and most powerful on the market.? Selectable heating power of 1200W or 2400W (each tube has a heating power of 1200W, so one or both tubes can be activated)? High-quality and robust stand base made of stainless steel? Swiveling heating head for precise alignment with the area to be heated? Remote control or direct operation at the heating head itself? Silent heat transfer without air movement, the heating beam is insensitive to wind and weather.? Protection class IP55, also protected against dust in harmful quantities and against water jets from any angle.? Fulfillment of the WEEE standards? "GS" tested and compliant with CE and EMC regulationsImportant:? The spotlight is suitable for wall and floor mounting. However, it must not be mounted on the ceiling.? Plug: the device is equipped with a T23 plug and requires a minimum of 13 Amperes. The suitable socket has square poles (not round). These sockets are usually available in laundry rooms, in new buildings, and construction temporary facilities. Therefore, the plug does not fit into conventional household sockets with 10A. Please check in any case before purchasing whether you have a corresponding socket available. Also, refer to the photo in our image gallery where the plug is depicted.? Protection class IP55: The heater head itself is protected to IP55, which means it is protected against water jets. Therefore, outdoor use is possible. The plug itself must be protected from moisture. The included connection cable is approximately 1.5m long.? Lifespan: The heating tubes have an expected lifespan of up to 5000 operating hours, which corresponds to 5-10 years depending on usage frequency. Due to the high protection against spray water, the internal components are very well sealed. Replacing defective tubes is theoretically possible, but very labor-intensive. Additionally, the water protection is lost during a replacement. Therefore, if the heater has reached the end of its lifespan, it is advisable to replace the entire head.Scope of delivery:? Radiant heater? Tripod? Wall mount? Remote control (2 x AAA batteries not included)Heating lamp usage examples:Heating of: terraces, seating areas, balconies, festival tents, workplaces, construction sites, workshops, agriculture, garages, storage rooms, basements, sheds, gardens and for use in professional and hobby activities, etc.   2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart)(akd) Technical dataVoltage: 220V-240V / 50HzPower consumption: max. 2400 WMinimum protection: 13 AProtection class heating head: IP55Dimensions of heating head (H/W/D): 25 x 70 x 23 cmDimensions with tripod (H/W/D): max. 230 cm x 70 cm x 46 cmWeight: 15 kg (complete including stand), 3.7 kg (only heating head)Operation setting: Remote control or directly on the deviceApplication area: up to max. 20m2 indoor area or approx. 10m2 outdoor areaSwiss plug: Yes / T23Guarantee: 2 years

Learn more More Fewer

Powerful air dehumidifier / construction dryer with metal housing. For effective drying of larger rooms and water damage. Characteristics• Dehumidification capacity of up to 50 liters / day• Electric hygrostat (LED) for regulating and setting the desired humidity• Function for continuous operation/continuous dehumidification• Power consumption meter (kWh)• Operating hour meter• Automatic memory function, saves the settings for automatic operation continuation after a power failure.• Clear display including current humidity, target humidity, and status overview• Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market.• Automatic professional defrost function• Humidity control in seamless 1% steps between 30% and 90% (plus continuous operation function)• Removable condensate tank• Connection possibility of a hose for continuous drainage of the condensate• Powder-coated metal housing/metal frame• Very easy mobility due to transport handles and large running wheels for safe travel over steps and uneven ground.• Operating warning light / Defrost light• No separate or additional coolant is required (closed circuit)• Washable air filter grid• Environmentally friendly refrigerant R290• CFC free and compliance with WEEE standardsHints"Not suitable for use in very cold rooms, as the cooling element can freeze during continuous operation below 8°C. Unlike similar models on the market, the ventilation also stops when the desired target humidity is reached, which means lower power consumption at the same performance."dehumidification performanceOverview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30 °C / 80% r.H. = approx. 50 L (60 % r.H. = approx. 25 L)20 °C / 80% r.H. = approx. 25 L (60 % r.H. = approx. 14 L)15 °C / 80% r.H. = approx. 18 L (60 % r.H. = approx. 10 L)10 °C / 80% r.H. = approx. 10 L (60 % r.H. = approx. 7 L)(r.H.=relative humidity)(akd)  Tension 220-240 V / 50 Hz Power consumption max. 820 (3.7 A) / 700 W (3.2 A) at 20 °C / 60 % r.H. Sound pressure level 57 dB(A) (Manufacturer's specification) dehumidification performance 50 liters/day (30 °C / 80 % r.H.)  amount of recirculated air 350 m³/h (installed) condensate tank approx. 5.5 liters (direct hose connection possible) Compressor    Rotary compressor  refrigerant  R290 (230gr.) Dimensions (H x W x D)     925 x 605 x 462 mm Weight 31 Kg cessation of operations Digital Ambient temperature 8 °C ~ 32 °C Area of application min. 11 m² to max. 120 m² Swiss plug Yes   hose connection Yes guarantee 2 years

Learn more More Fewer

The AB-10 is a powerful, versatile fan made of robust plastic. The radial flywheel pushes the laterally drawn air forward with a lot of pressure. An optional hose distribution attachment can be mounted on the air outlet side.ApplicationsThe fans are versatile and can be used in various ways, for example:• for commercial use on construction sites to accelerate the drying of construction materials• for drying water damage• for the removal of vapors• as carpet dryer3 different positionsThe fans can be positioned in three positions:horizontal - Air discharge straight forward: this position directs the air horizontally over the floor and drives moisture from carpets or also from underlays into the room air. This massively accelerates the drying of the substrate.45° inclined - Blowing out at an angle upwards: For example, when damp walls or suspended objects need to be dried.90° tilted - Blowing upwards: for drying ceilings or for more even air distribution in rooms, without stirring up dust.Characteristics• Maximum air volume of strong 4500 m³/h• Three fan speeds (1 = 520W, 2 = 550W, 3 = 620W)• Impact-resistant housing made of durable "Linear Rotational Plastic" (rotational plastic)• Powerful high-performance single-phase motor with starting and running capacitor (PSC motor)• Operation and airflow possible in three different positions (air angle positions 0°, 45°, 90°)• Easy to carry and transport thanks to compact design and convenient carrying handle• The device is immediately ready for use (no installation or assembly required)• No interruptions during power failure (device continues from where it was interrupted)• Stackable (multiple identical devices can be stacked on top of each other for operation and storage)   continuous operationThis blower is designed for high air circulation, even over extended periods. However, to avoid excessive wear, it should be turned off for 1-2 hours after 48 hours of continuous operation, allowing the motor to cool down completely.   Technical data Tension 230V ~ 50Hz Max. Power Consumption 880 W (3.9 A) Max. air circulation 4500 m3/h fan speeds 3 ( 3 = 620 W, 2 = 550 W, 1 = 520 W ) Max. speed 1300 U/min. Masse (H x B x T)  51 x 43 x 48 cm Weight 12.6 kg cessation of operations rotary switch Swiss plug Yes, 3m Cable guarantee 2 years

Learn more More Fewer

The industrial air purifier WDH-AF500B is a robust dust collector with a HEPA filter for industrial high-performance tasks as well as for cleaning the air on construction sites, in carpentries, or production halls with heavily polluted indoor air. It has a respectable air flow rate of approximately 850 m3/h, thus protecting employees from harmful dust, spores, asbestos, and other particles in the air.The ventilation strength can be adjusted continuously using a rotary control. Even at the highest setting, the operating noise is within a quite acceptable range, which also allows for normal communication. The housing is made of almost indestructible special plastic and has a carrying handle. An air hose can be connected during the process and/or in the after-run.The coarse dust filter cleans the air of larger particles in advance (purity rate 90%). Subsequently, the HEPA filter cleans the air almost completely with each pass (purity rate of over 99.9%).The delivery includes a HEPA filter (H13) as well as a coarse dust filter (G4)."Additionally, an optional activated carbon filter is available, which reduces odors and vapors."Properties of air purifiers: • Easy operation with stepless rotary control• Warning light for clogged filters, which reminds you to change them.• Housing made of robust special plastic, easy to clean• Possibility for hose connection in the intake area (suitable hose diameter 30 cm) as well as in the discharge area (suitable hose diameter 20 cm)• Low power consumption of 225 watts with a maximum air circulation of approximately 850 m3/h• No interruptions during power failure (device continues from where it was interrupted)• Carrying handle for easier transport• Stackable: up to four 4 devices can be stacked on top of each other.Properties Filter:•  HEPA Filter (H13) / included in the delivery: Purity rate of 99.95%. One of the best filters available, this brand filter captures and filters particles as small as 0.0003 mm. This includes pollen, germs, mold spores, and fine dust.•  Coarse dust filter (G4) / included in the delivery: The coarse dust filter (G4) removes all larger particles (> 10 ?m) with a purity rate of over 90%. When used as a pre-filter for the HEPA filter, it ensures a longer lifespan of the HEPA filter.• Activated carbon filter / not included in the delivery: Absorbs and cleans many types of smoke and odors and also helps to break down toxic vapors, gases, and solvents.Combination options filter:"One or both of these filters can be installed in the lid of the air purifier, or the space can be left free."• Coarse dust• Activated carbonIn the main part of the cleaner, either the HEPA filter can be installed, or the space can be left empty.The filters are consumables and cannot be cleaned. Depending on the level of air pollution, they must be replaced regularly.The device features a 7m long connection cable with a Swiss plug (220-240V / standard household socket).   warranty 2 years Shipping costs for 1 item: from Fr. 18.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataVoltage: 220 – 240V / 50HzMax. input: 225W (1.0 A)Air circulation: 850 m3/hNoise: min. 45 dB(A)max. 65 dB(A)diameterHose connections: Supply air 30 cmexhaust air 20 cmDimensions (H x W x D): 635 x 408 x 625 mmWeight: 17.5 kg

Learn more More Fewer

Ozone Generator WDH-AP001with 1000 mg/h (1 g/h) ozone outputThis small professional ozone generator is ideal for odor neutralization (e.g. smoke odor, decay odor, toilet odor, treatment of car interiors). It impresses with its good price-performance ratio and its ease of use.The ozone tubes represent the latest technology in ozone generation with a very long lifespan. The device itself is manufactured to be very robust.WDH is a quality product or brand that is almost exclusively available through specialized retailers. WDH air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc.  Characteristics • Ozone emission of 1000 mg/h (1 g/h) • Equipped with very durable ozone tubes• Continuous operation possible • Stainless steel frame with carrying handle• Low power consumption of only a maximum of 110 wattsImportant Safety Instructions The device may only be operated by qualified personnel who are well acquainted with the effects and application of ozone or have acquired this knowledge through training. Legal regulations must be observed during operation. Ozone is a toxic gas and oxidizing agent at higher concentrations (above 0.1 ppm or 0.2 mg ozone/m³) and is classified as dangerous and harmful to health! Precautions must be taken to prevent uncontrolled release of ozone. Ozone attacks natural rubber, latex, and plants and poses a risk to people and animals. We recommend using this device only for odor neutralization that is not due to harmful organisms.   Technical data  Tension 220V-240V / 50Hz Power consumption 110W max. (05.A) Ozone output (optimal) 1.000 mg/h (1 g/h) Max. Ozone Concentration  15-25 mg/l water resistance IPx0 Dimensions (H x W x D) 26 x 14.5 x 30 cm Weight 3.2 Kg Area of application 5°C - 40°C / max. 75 % r.H. Swiss plug Yes guarantee 2 years

Learn more More Fewer

5000 mg/h (5 g/h) ozone output This professional ozone generator is ideal for odor neutralization even of extremely strong odors (e.g. smoke odor, decay odor, toilet odor). The ozone tubes represent the latest technology in ozone generation with a long lifespan.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, CFC-free, of course with CE conformity, recyclable materials, etc.  Characteristics • Ozone emission of 5000 mg/h (5 g/h)• Equipped with very durable ozone tubes• Continuous operation possible• Timer function to select the automatic operating duration between 0 – 90 minutes• Stainless steel frame with carrying handle• Low power consumption of only a maximum of 130 watts• Clear control panel• Suitable for wall mounting Important Safety Instructions The device may only be operated by qualified personnel who are well acquainted with the effects and application of ozone or have acquired this knowledge through training. Legal regulations must be observed during operation. Ozone is a toxic gas and oxidizing agent at higher concentrations (above 0.1 ppm or 0.2 mg ozone/m³) and is classified as dangerous and harmful to health! Precautions must be taken to prevent uncontrolled release of ozone. Ozone attacks natural rubber, latex, and plants and poses a risk to people and animals. We recommend using this device only for odor neutralization that is not due to harmful organisms.You can also rent this device from us. Technical data   Tension 220V-240V / 50Hz Power consumption 130 W (0.6 A) Ozone output (optimal) 5000 mg/h (5 g/h) Max. Ozone Concentration 15-25 mg/l water resistance IPx0 Dimensions (H x W x D) 59 x 38 x 22 cm Weight 12.7 Kg Area of application 5°C - 40°C / max. 75 % r.H. Swiss plug Yes guarantee 2 years

Learn more More Fewer

A handy electric heater with very good heat efficiency thanks to the ceramic heating element. This allows the heater to reach the desired heating output with a short warm-up time. At the high heating level of 2000 W, the blown air is heated to more than 60 °C above room temperature. The temperature controller has a wide range starting from 0 °C. The BGP can thus also be used as a frost guard when the room temperature needs to be kept just above freezing.The ventilation is rather mild at about 120 m³/h compared to other electric heaters in this category; however, the BGP is hardly audible in terms of operating noise thanks to the quiet radial fan. This model is therefore suitable not only for use in construction and industry but also for heating quiet areas such as waiting rooms, living rooms, or simply for keeping your feet warm under the office desk. The housing is made of a black, fireproof plastic and a metal rack with a practical carrying handle. The fan head can be rotated vertically in a large radius up to 90°, allowing the warm air to be directed precisely to the desired location. With the help of two standard hooks, the device can even be hung on a wall (hooks not included in the delivery).The heater has two rotary controls at the top of the housing:• left step controller: only ventilation / 1200 W / 2000 W• right: stepless thermostat for regulating the desired temperatureAdditionally, there is an operating light located between the two controls that indicates when the heating operation is running."If the temperature is correct, the heating pauses (the ventilation also stops). If the temperature falls below the set value, the operation starts automatically."The adjustable range of the temperature controller is from 0° to 85°C, with an overheating protection that interrupts the heating operation at a room temperature of just over 40°C.Due to the high exhaust temperature, the device should not be placed within reach of children or pets, although the solid front grill of this model poses significantly less risk of burns than similar fan heaters, which only have a metal grid for air exhaust. How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 220V-240V / 50HzHeating levels: 2 levels 1200 W / 2000 W + pure fan level: 25 WMinimum protection: 9.1 ARoom thermostat: continuously adjustable 0 - 85 °CAir volume flow: only one fan stage  our measurement: 120 m³/h(Manufacturer's specification: 170 m³/h)Protection class: IP20operating noise(our measurement): 1 m distance: 39 dB(A)2.5m distance : 36 dB(A)Dimensions: Height with handle: 32 cmWidth: 30 cmDepth: 25 cmWeight: 3.1 KgOperating mode: rotary knobApplication area: up to max. 25 m²Swiss plug: Yes + 1.30 m connection cableWarranty: 2 years   

Learn more More Fewer

Powerful construction heater with 400V / 16A connection for heating construction sites and industrial rooms. Very good price / performance ratio with easy handling. The device is very effective and made almost entirely of metal, making it extremely robust. The connection cable of about 1m length and the CEE16A plug are included in the delivery. As accessories, we offer extension cables in various lengths at affordable prices.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. Quality standards include, for example: durability, compliance with the specified performance, TÜV "GS" certified, of course with CE conformity, recyclable materials, etc.The WDH 9kW series is optimized according to the latest state of technical knowledge.  Advantages at a Glance • Heating power adjustable up to 9000 watts (9 kW)• Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 4500 watts 2 = 9000)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection as well as protected against splashes and small foreign bodies (IP24) • Stepless temperature control (0 ~ 45° C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• Quiet operation• No oxygen consumption• Tested by Intertek "GS" and CE compliant• WEEE Standards  Miscellaneous • A five-pole 16 A high-voltage connection 380-400 V (50 / 60 Hz) with CEE16A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.  usage examplesTemperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden houses, laundry rooms, and for use in professional and hobby activities, etc. Additionally, also ideal as a frost guard.Drying: Ideal for faster drying of plaster, screed, etc. (Work can be continued or applied very quickly)Damp Rooms: Ideal for damp basements, old walls, and drying all damp objects.Damage Removal: After flooding, after damage from extinguishing water, or in case of decay, these devices are ideally suited to support the drying process.  How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 380V - 400 V / 50HzPower consumption: 2 levels 4.5 kW / max. 9 kWMaximum protection: 16 ARoom thermostat: 0 - 45 °CAir volume flow: 660 m³/hProtection class: IP24(Foreign body protection with ø > 12.5 mm + splash water protection)Dimensions (H/W/D): 43 x 30 x 39 cmWeight: 9.7 kgOperating mode: rotary knobApplication area: up to max. 90 m²Stecker: CEE 16 AWarranty: 2 yearsSeries: WDH-BGP09Special: 1.15 m connection cable included in the delivery

Learn more More Fewer

High-quality floor fan made of robust metal with aluminum rotors. The fan head is adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a durable high-performance motor, and a practical carrying handle. It impresses with its good price-performance ratio and its ease of use.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation. For example, the FE50X is also in use at the Technorama, where it operates daily.Characteristics· Large fan head with plenty of recirculation· Three fan speeds, easily adjustable via a rotary switch on the back· The direction of the fan is horizontally adjustable without steps.· Made entirely of robust metal· Rotor blades made of 100% aluminum· Powerful, durable high-performance motor with copper coil· Handy, easily transportable thanks to carrying handle· Long power cable, approx. 2.40m length, Swiss plug· No assembly required, the fan is ready to use immediately.· Relatively quiet operation· Robust motor housing· RoHS and CE compliant  Technical data  Power consumption 120 Watts max. Rotordurchmesser 50 cm airflow Up to 8500m³/h, wide dispersion speed levels Three Cable length approx. 2.40m Connection Fixadapter suitable for Swiss sockets Dimensions ( W x H x D ) 61 x 62 x 26 cm Weight 6.5kg scope of delivery plug-in fan, no assembly required guarantee 2 years  

Learn more More Fewer

High-quality, large basket fan made of robust metal and aluminum rotors. The fan head is adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a durable high-performance motor, and a rack with 2 wheels for easy mobility. It impresses with its good price-performance ratio and its simple handling.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Extra large fan head (Ø 60cm = 24") with up to 10500 m³/h recirculation• Three fan speed settings, easily adjustable via a rotary switch on the back• The fan's direction of airflow is horizontally adjustable without steps.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easily transportable with rack and 2 wheels• Long power cable, approx. 2.20m length, Swiss plug• RoHS and CE compliant  Technical data  Power consumption 120 Watts max. Rotordurchmesser 60 cm / 24 inches airflow Up to 10500m³/h speed levels Three Cable length approx. 2.20m Connection Swiss plug 230V 3-pole (standard household socket) Dimensions ( W x H x D )  80 x 71 x 38.5 cm operating noise 64 dB(A) at a distance of 2.5m Weight 6.5kg  

Learn more More Fewer

The H600A quickly cleans the air of fine dust, pollen, bacteria, and viruses with a high purity rate. The strong ventilation is a great advantage. The more frequently the room volume passes through the device, the purer it becomes. While particles such as fine dust, as well as viruses and bacteria, are practically filtered out of the room air by the HEPA H13 filter by almost 100% with each pass through the device, odors are gradually reduced until they are completely eliminated after several passes.Properties, Features & BenefitsprefilterThe pre-filter (filter mesh) removes all larger particles such as coarse dust, hair, and lint, and ensures a longer lifespan for the other filters.HEPA Filter (H13)One of the best filters overall, this brand filter of filter class "H13" captures and filters particles as small as 0.0003mm. This includes pollen, germs, mold spores, and dust with a purity rate of 99.97%.Pro Activated Carbon FilterAbsorbs and cleans many types of smoke and odors (e.g. cigarette smoke) and also helps to break down toxic vapors, gases, and solvents (e.g. formaldehyde, benzene, ammonia, sulfur, etc.).EPA & Activated Carbon Filter Combination (E11)A filter as a combination of the two aforementioned quality filters to achieve even better results. It is placed in front of the (more expensive) HEPA H13 and activated carbon filters in the device and significantly extends their lifespan.anion exchangersProduces approx. 3 million anions/ions per second, which proactively combat smoke, odors, bacteria, viruses, and other dirt particles in the room.Air Sensor Operation (Automatic Mode)Automatically measures the air quality. If the determined air quality is very good, the device automatically switches to the lowest operating strength. If the result is the opposite and the air quality is poor or bad, the operating strength automatically adjusts upwards.Auto TimerWith the timer, you can set/select a switch-on time and a remaining runtime of the device of up to 8 hours.Touch-PanelWith this modern control panel, you can make your settings quickly and precisely.5 speed levelsFive options for your very personal requirements.night operationDimming mode as well as very quiet operation.LED display:Modern and very clear LED display, so you always have a quick overview of all settings.Furthermore, the current air quality is displayed. Both the pollution values of odors/vapors (display VOC) and the airborne particles in various sizes can be queried (display PM). The smallest displayed unit is particles smaller than 1 micrometer per cubic meter of air (display = PM 1.0). Particle size steps: 1.0 / 2.5 / 10.0). PM2.5 is also referred to as fine dust (2.5 micrometers is one 400th of a millimeter). A 3-color display facilitates the quick recognition of the approximate air condition.Filter change indicatorThis will indicate to you when it is necessary to replace one or more filters.Stable housingVery robust and with a high-quality and appealing design.parental controlsSuitable to avoid unintentional adjustment of the settings.MiscellaneousThe device works with one (1) HEPA filter plus one (1) activated carbon filter plus one (1) filter combination. Depending on the area of use, the filters last up to one year.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have established an excellent reputation for high-quality air purifiers in recent years. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc.usage examplesHealthier Climate: Create a healthier environment and thus a more noticeable well-being.Odor elimination & tobacco smoke removal: Not only is the unpleasant smoke from cigarettes, pipes, cigars, etc. quickly absorbed and neutralized, but nicotine also has less chance to settle and turn from white to yellow.Fine dust and exhaust removal: Protects against many toxic substances in the air, to which you are particularly exposed in large cities and on highways.Asthmatics & Allergy Sufferers: Particle sizes AIRCENTER RemarkIt is therefore advisable to read the operating instructions before use in order to make the most of the various functions. After just a few minutes, everything will be clear and you will have a lot of enjoyment with the device.Regarding cleaning effectiveness against the Corona virusCoronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).HEPA filter of category H13 (as in this device) cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The H13 filter therefore captures the aerosols and cleans the air of COVID-19 viruses. The integrated ionizer is capable of significantly enriching the air with anions. Anions encapsulate viruses in the air and neutralize them. Therefore, the combination of H13 and ionizer means that the H600A can significantly reduce the concentration of viruses in the air. For risk reduction, for example, in waiting rooms, classrooms, offices, or in the hospitality industry, the device is very effective and recommended. Technical data Tension 220 - 240V / 50Hz Max. Power Consumption 145 W (0.7 A) air circulation Level 1: 90 m³/h Level 2: 225 m³/h Level 3: 380 m³/h Level 4: 475 m³/h Level 5: 540 m³/h  operating noise   Night mode: 40 dB(A) Level 1: 42 dB(A) Level 2: 53 dB(A) Level 3: 59 dB(A) Level 4: 63 dB(A) Level 5: 66 dB(A) Recommended room size  max. 70m² (resp. 170 m³) Masse (H/B/T) 850 x 450 x 420 mm Weight 22 kg guarantee 2 years

Learn more More Fewer

The TG105L is an exceptionally powerful axial fan with a high-quality motor. Ideal for large-scale air needs, such as in agriculture, tunnel construction, etc., but also for events and film sets. Given the high air volume, this wind machine is energy-efficient with a power consumption of 750W. The power fan is made of sturdy metal and maintains a good stand in the rack even when operating at full speed. The rack itself has two wheels on one side as well as two stand feet. For moving, the fan can be lifted and rolled away using practical handles. Due to the tubular housing, the axial fan not only disperses the air upwards and sideways but also has a considerable throw distance.The recirculation volume can be adjusted in two stages using the rotary control on the back.Characteristics:• Powerful axial fan with up to 13000 m3 of recirculated air per hour• Robust metal housing with rack, wheels, and handles• Durable high-performance motor, three-stage adjustable• Metal rotor blades• Drum inclination 180° rotatable• Splash water protected (IP24)• Retains the setting even during a power outage• Top price / performance ratio2 year guaranteeShipping costs for 1 pc.: from Fr. 45.- (Basic freight, all shipping options can be viewed in the shopping cart) Technical dataAir circulation: max. 13000 m3/hSpeed: max. 1039 rpmVoltage: 220 ~ 240V / 50HzPower consumption: max. 750 W (1.2 A)Protection class: IP24Diameter air duct: approx. 108 cmWeight: 50kgWeight: (H x W x D) 1290 x 1230 x 525 mmConnection cable: approx. 2m + CH plugoperating noiseLevel 1 / 1m distance 81 dB(A)Level 1 / 2.5m distance 78 dB(A) Level 2 / 1m distance 85 dB(A)Stage 2 / 2.5m distance 82 dB(A)

Learn more More Fewer