Wall console / ceiling support 40 cm made of robust, hot-dip galvanized steel. For mounting laundry line systems on ceilings or for bridging pipes and conduits on walls. Optional with adjustable extension insert, for a maximum extension of 30 cm of the base console. Technical data   Weight: 2.3kg

Learn more More Fewer

Suitable for a variety of larger dehumidifiers. The 48cm version fits, for example, our dehumidifiers Quadro Q40, Flipperdry F300, Optimo80, E33, Oasis, and Woods. The side supports and 5mm raised edges at the bottom prevent the dehumidifier from rolling away.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate.scope of delivery- Wall bracket made of powder-coated white steel sheet- 2 screws/anchors for wall mounting  Data Internal dimensions (Height x Width x Depth): 26 x 48 x 39 cmWeight: 2kgLoad capacity: max. 23 kg Lochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mm

Learn more More Fewer

Wall console, suitable for a variety of smaller dehumidifiers from our range, for example to:Dryfix Royal, Foxy F12 + X3, Airsec3000, Lübra LDH626L + WDH101pro, Akto930, WDH-416S/725DG, Optimo20 etc.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate. execution40.5 cm inner width / 41.5 cm outer widthSteel sheet white powder-coated or light gray powder-coated Scope of delivery:- Wall mount made of sheet steel- 2 screws/anchors for wall mounting   Technical data Dimensions (Height x Width x Depth): 25 x 41.5 x 30 cmWeight: 1.5kgLochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mmload capacity up to 16 kgLarger versionfor larger or heavier dehumidifiers, please also refer to our bracket for large devices.

Learn more More Fewer

Wall mount for dehumidifier E33 (Dryfix) and Sonora33 (Roth-Kippe) made of robust, rust-free metal. Easy self-assembly possible. Very well-crafted wall console with rubber buffers to minimize device vibration. Includes necessary mounting screws/anchors. Technical dataDimensions (W/H/D): 37 x 23 x 38 cm

Learn more More Fewer

Stable wall mount for dehumidifier FDK100, consisting of two load-bearing L-elements made of metal, as well as sound buffers and necessary mounting materials. The console is galvanized primed (=rust-free) and subsequently powder-coated white.1 delivery unit contains:- 2 x L-beams- 1 x mounting material incl. screws/anchors and 4 rubber buffers Technical data Width of shoulder straps 5 cmLength of support arm from wall 52.5 cmHeight of support arm on wall 41.5 cmThe device extends 55cm from the wall into the room when mounted on the bracket.made in ItalyGS/TüV tested.Load capacity per arm min. 120 kgwarranty 2 years

Learn more More Fewer

Stable, variable wall mount, suitable for example for the dehumidifier FDK44. The wall console consists of an 80 cm wide wall rail and two brackets, which can be flexibly adjusted in width to the desired distance. Sound dampers reduce the transmission of device vibrations to the wall, on both sides at the contact surface to the wall and at two points where the device rests on the brackets.A spirit level included in the scope of delivery facilitates the assembly.The console is galvanized primed (=rust-free) and subsequently coated with white powder. 100 kg load capacity.Made in Italy. GS/TüV tested.Shipping costs for 1 item: Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart)  Technical dataWidth of support rail 800mmTotal length of support arms 420mm Total height of support arm 375mmDistance of outer holes on support arms (external dimension) 375mmWidth of the carrier arm 50mm 

Learn more More Fewer

Wall console made of galvanized steel (rust-free), with stabilization support. Length 100 cm, 8-fold perforated for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 96 cm from the wall (depending on the chosen clothesline system)."ceiling telescope'If the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 100cm and cannot be changed. With a ceiling height of 2.85 m, this results in exactly the standard height of the laundry lines of 1.85 m.'As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 8 tracks, for example, for bed linen, etc. Please also refer to our junior line complete sets.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Wall console made of galvanized steel (rustproof), with stabilization support. Length 63 cm, 5-fold drilled for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 59 cm from the wall (depending on the chosen clothesline system)."ceiling telescopeIf the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 60cm and cannot be changed. With a ceiling height of 2.45 m, this results in exactly the standard height of the laundry lines of 1.85 m.As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 5 tracks, for example for bed linen, etc. Please also refer to our junior line complete sets.Technical data Material: galvanized metal, rustproofBase dimensions: 18 x 18 cm, 4-fold drilled (10 mm diameter)Length from wall total: 63 cmDistance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Wall consoles Dryfix (spacers) for connection rails zinc-coated, rust-free, for easy bridging of pipes or electrical lines on walls. Available in 3 different lengths. For rails up to 1.50m, 2 pieces per connection rail are sufficient; above that, 3 brackets are recommended for optimal stability. "If you use wall consoles or ceiling telescopes, only metal connection rails are recommended due to the strong tension of the cable (Dryfix Metal, Dryfix Vario, or Krüger), no aluminum rails. These consoles fit all of our metal rails." Total length 10 cm = Bridging 5 cm)Total length 20 cm = Bridging 15 cm)Total length = From wall to front console Bridging = Free space between the wall and the back of the connection rail, valid for Dryfix metal and Krüger rails. Dryfix Vario metal rails are slightly narrower, so the bridging is +1cm more each time, thus 6/16/26 cm. Technical Data Console Length / Weight:10 cm / 465 gr.20 cm / 715 gr.

Learn more More Fewer

Wall console made of galvanized steel as a single element of the Juniorline systems. Juniorlines are practical additional laundry hangers that offer space-saving drying options for T-shirts, underwear, socks, etc. along free walls. They are particularly practical when installed at hip height. Often, two systems are also mounted one above the other, one at height and one at a practical working height. One system provides space for 3 lines."These brackets are suitable when the entire length between two walls cannot be used for hanging laundry. If they can be stretched directly from wall to wall, the corner brackets are more advantageous (listed below on this page as accessories). Wall and corner brackets are compatible in terms of hole spacing."Compatible with Dryfix or Krüger sliding rollers.Suitable for Dryfix+Krüger sliding rollers as well as chrome-plated cable tensioners Technical data Material: galvanized steelRagt approx. 27cm into the roomWidth wall base 13cm3 holes for sliding rollers, distance 8cm each For a complete junior leash system, you need• 2 brackets (depending on the room 2 x wall brackets or 2 x corner brackets or 1 x wall + 1 x corner bracket)• 6 castors• Clotheslines (Calculation of rope length = 3 x desired system width + 1 x 16cm)• 1 rope tensioner   You will find these items under Accessories at the bottom of this page.  

Learn more More Fewer

High-quality wall console in two sizes, suitable for Aerial dehumidifiers of the AD series AD420 / AD520. With protective edge and perforations in the base plate for precise hold as well as cutout for cable passage. Black powder-coated.

Learn more More Fewer

High-quality wall console in two sizes, suitable for Aerial dehumidifiers of the AD series AD430 / AD540. With protective edge and perforations in the base plate for precise hold as well as cutout for cable passage. Black powder-coated.

Learn more More Fewer