The TFA Klima Bee measures the desired values in seconds, at the push of a button, and with good precision. With its attached sensor, it is particularly ideal for measuring in pipes and conduits. Additionally, it stores minimum and maximum values during the direct measurement process.Advantages• quick response time• high accuracy• simultaneous display of temperature and humidity• automatic shutdown• Minimum / Maximum value storage• handy and lightweight• Backlighting• with tripod thread  Technical data  TFA Dostmann Article No.: 30.5036 Lot: 52 x 35 x 165 mm Weight 115 g Measuring range: Air temperature: -30...+70°C (-22...+158°F) Humidity: 0 … 100% Accuracy:   Temperature ±0.5°C from -10°C…+70°C Humidity ±2.5% to 3.5% depending on the measurement range Operation: 1x 9V battery (included in delivery) EK-EL

Learn more More Fewer

The TFA Twin Plus is a compact, attractive hygrometer/thermometer. An internal display shows the current values of temperature in °C and relative humidity in %. It displays the currently measured humidity and temperature as well as the min./max. values of the last 24 hours."Via radio connection, the same data can also be retrieved from a second sensor, for example outdoors or in the basement. The radio distance may be a maximum of 30m, slightly less through solid walls (according to our tests, penetrating two brick walls over 30m is no problem)."The indoor unit and the transmitter can be either wall-mounted or set up with a foldable stand.Characteristics:Komfort-Iconpermanent display of maximum and minimum values with automatic reset after 24 hoursTemperature and humidity alarmFrostsymbolAluminum optics Batteries for indoor unit and transmitter are not included in the delivery (2 pcs. type AAA each)warranty 2 yearsShipping costs for 1 item: from Fr. 10.- (Basic B-Post, further shipping options can be found in "My Cart") Technical data   Measuring range:Temperature measurement range base station: -10...+50°C (+14...+122°F)Temperature measurement range transmitter: -20...+50°C (-4...+122°F)Humidity measurement range base station: 20…95%Humidity Measurement Range Transmitter: 20...99%Batteries: 2x 1.5 V AAA each (not included)Base station mass:Width x Depth x Height 137 x 17 x 83 mm (with stand extended Depth 38mm)Weight:105 gMass Send:Width x Depth x Height 64 x 20 x 96 mm (with stand extended Depth 34mm)

Learn more More Fewer

TFT Series - the premium class of adsorption"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • Stability through 4 rubber feet (abrasion-resistant and non-staining)• 2 carrying handles on the sidesDue to high demand, the delivery time is currently 6-8 weeks from the order. 2 year guarantee You can see the shipping costs in the shopping cart. Technical data Dehumidification capacity: 15.60 kg per day                                         = 0.65 kg per hour Air volume / Pressure Process air volume blowing free: 150 m³/hPressure: 100 Pa Nominal regeneration air: 50 m³/hPressure: 100 Pa   Workspace Temperature: -30 °C to +35 °CHumidity: 10 - 95% r.H.  Temperature rise in the heating coil +80°CNoise level at: 1m distance 63 dB(A)                               3m distance 53 dB(A)                              10m distance 42 dB(A)Power connection: 1 x 230 V / 50 HzPower consumption: 1.40 kW (max. 6.9 A)Protection: 10A slowConnection cable / plug: 3m / T12 (standard household socket)Mass housing (L x W x H) mm: 335 x 375 x 420 mmDiameter hose connections: regeneration air OUT D = 80mm                                                           Regeneration air ONE D = 100mm                                                           Process air OUT D = 100mm                                                           Process air IN D = 125mmWeight: 17 kg

Learn more More Fewer

TFT Series - the Adsorption Dryer"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • solider Stand• 4 carrying handles on the side Due to high demand, the delivery time is currently 6-8 weeks from the order.  2-year warranty You can see the shipping costs in the shopping cart. Technical data Dehumidification capacity: 304.8 kg per day                                         = 12.70 kg per hour Air volume / Pressure Process air volume blowing free: 1500 m³/hPressure: 200 Pa Nominal regeneration air: 500 m³/hPressure: 250 Pa   Workspace  Temperature: -30 °C to + 35°C Humidity: 10 - 95% r.H. Temperature rise in the heating coil: +80°CNoise level at a distance of 10m: 64 dB(A)Power connection: 1 x 400V/3 / 50 HzPower consumption: 18 kW (max. 27.5 A)Connection cable / Plug  Mass housing (L x W x H) mm: 1285 x 548 x 1255 mmDiameter hose connections: regeneration air OUT D = 250mm                                                                    Regeneration air ONE D = 220mmx350mm                                                                    Process air OUT D = 420x615mm                                                                   Process air A D = 420x615mm  Weight: 210 kg

Learn more More Fewer

TFT Series - the Adsorption Dryer"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • soldier Stand• 4 carrying handles on the side  Due to high demand, the delivery time is currently 6-8 weeks from the order.   2 year guarantee   You can see the shipping costs in the shopping cart.   Technical data Dehumidification capacity: 453.6 kg per day                                       = 18.90 kg per hour Air volume / Pressure Process air volume blowing free: 2000 m³/hPressure: 300 Pa Nominal regeneration air: 820 m³/hPressure: 250 Pa   Workspace Temperature: -30 °C to + 35°C  Humidity: 10 - 95% r.H. Temperature rise in the heating coil: +80°CNoise level at a distance of 10m: 66 dB(A)Power connection: 1 x 400 V/3 / 50 Hz Power consumption: 27 kW (max. 42.5 A)Connection cable / Plug  Mass housing (L x W x H) mm: 1285 x 845 x 1255 mmDiameter hose connections: regeneration air OUT D = 250mm                                                                         Regeneration air ONE D = 220x350mm                                                                         Process air OUT D = 420x615mm                                                                         Process air A D = 420x615mmWeight: 220 kg

Learn more More Fewer

With the Eberle RTR-E3311 thermostat plug, you can easily and quickly regulate fan heaters, heating stoves, and electric heaters up to a maximum of 2300W (10 Amperes). The thermostat is plugged into the socket, and the heater can also be plugged in on the other side of the plug without any installation or tools.The temperature sensor / controller is connected with a cable and can be used exposed or mounted on the wall.   Technical data  Voltage: 230V / 50HzContact voltage / current: 230V / 10 ADimensions (H/W/D): 75 x 75 x 2.5 cmWeight: 390 grOperating mode: Rotary knob / Switch: Power On/OffMeasurement accuracy: +/- 5%Measuring interval: every 10 secondsAmbient temperature: 5°C ~ 30°C (0.5°C resolution)Night lowering: Yes (5C° above external timer)Protection class: IP30, protection isolatedSwiss plug: YesWarranty: 2 years

Learn more More Fewer

This beautifully crafted catch tray complements hand dryers where residual water can drip down from the device onto the floor. Ideal, for example, for the "Airblade". The tray is made of ABS, black with an integrated safety device. It is available either completely with wall protection plate and wall bracket as shown here or as a spare part consisting of tray/mounting separately.   "The protective plate and bracket are made of stainless steel 1.4301 (acid-resistant, non-rusting 18/10 chrome-nickel steel), electropolished."   The delivery of this complete set includes the necessary screws and dowels.   The tub is also available in a version made of silver-colored plastic.   Developed and produced in Switzerland by AirCenter AG / Schönmann.

Learn more More Fewer

This beautifully crafted catch tray complements hand dryers where residual water can drip down from the device onto the floor. Ideal, for example, for the "Airblade". The tray is made of ABS, silver-gray with an integrated safety device. It is optionally available here complete with wall protection plate and wall bracket or as a spare part consisting of tray/mounting separately.   "The protective plate and bracket are made of stainless steel 1.4301 (acid-resistant, non-rusting 18/10 chrome-nickel steel), electropolished."   The delivery of this complete set includes the necessary screws and dowels.   The tub is also available in an alternative version made of black plastic.   Developed and produced in Switzerland by AirCenter AG / Schönmann.

Learn more More Fewer