Filter housing (without filter) as a holder for various air filters.  If a color mist filter is used, color mist can be extracted and filtered in spray shops or painting companies, for example. For this, this housing and the suitable fan "PowerVent3000" are required (all necessary elements are included in the package "FarbStop 3000"). Only the extraction of non-explosive emissions is permitted.  If pre-filters G4 and/or fine dust filters F9 are used, an effective air purifier or a mobile filtration system for construction sites and businesses is created. For this, this housing and the suitable fan "PowerVent3000" are required (all necessary elements are included in the package "DustStop 3000"). With the filter combination of pre-filter G4 and fine dust filter F9, dust that does not fall under the hazardous substances regulation can be extracted and filtered.   Suitable for: Fan PowerVent 3000Dimensions (L x W x H): 450 x 430 x 450 mm

Learn more More Fewer

Filter housing Heylo 3000 PLUS incl. filter pressure gauge (without filter). In combination with the fan PowerVent 3000, the system "DustStop 3000 PLUS" is used for dust extraction. With the filter combination of pre-filter G4 and fine dust filter M-class, dust can be extracted and filtered. The air purifier package DustStop 3000 PLUS consists of the fan PowerVent 3000, this filter housing 3000 PLUS, connection adapter, and air hose Ø 305 mm, and is recommended and supported by BG BAU. Suitable for: Fan PowerVent 3000Dimensions (L x W x H): 420 x 450 x 510 mm 

Learn more More Fewer

The air purifier HL 400 is a mobile air filtration device. Air is drawn in from the environment and passed through a 7-stage filtration system. The design air purifier filters viruses, bacteria, odors, pollen, and dust. With the help of the filtration system, the room air is filtered and pollutants are captured. The standard filter box consists of a pre-filter, cold catalyst filter, activated carbon filter, antibacterial filter, main filter H10 (according to EN 1822), sterilizing UV-A light, and ionization.      The HL 400 V with virus filter box (including certified H14 filter) additionally reduces the concentration of viruses (such as the current coronavirus) and bacteria. Stages of the filter system:   1st stage: prefilter"An aluminum filter is used as a pre-filter. The pre-filter filters coarse dust particles larger than 5 micrometers, such as household dust, flakes, and pollen. The filter can be rinsed with water and is therefore reusable. HEYLO recommends replacing the pre-filter annually."   2nd + 3rd level: cold catalyst filterThe catalytic decomposition reaction of the cold catalyst does not require UV rays, high temperatures, or high pressure. Under normal temperature conditions, the catalytic reaction can remove formaldehyde, benzene, xylene, TVOC, and other harmful gases. The reaction produces water and carbon dioxide. It does not lead to secondary pollution. It is a safe and environmentally friendly product that is state-of-the-art, suitable for a healthy home. During the catalytic reaction, the cold catalyst itself is not directly involved in the reaction. Its functionality does not change and is not lost. For this reason, a lifespan of about 5 years can be expected. Effective formaldehyde filterThe formaldehyde filter with activated carbon cleans the air of unwanted odors, gases, and substances. Additionally, it cleans the air in the shortest time from health-hazardous formaldehyde. The substances are absorbed by the activated carbon, and when the filter is saturated, it must be replaced. HEYLO recommends this every 6 months.In cases of strong odor pollution, such as cigarette smoke, a more frequent change may also be advisable.   4th + 5th level: Antibacterial cotton filterThe antibacterial filter is a precision filter that filters particles with a diameter of 5 micrometers. The special filter material is also treated with an antibacterial agent that can effectively kill 99% of all bacteria. High-efficiency EPA filter (particulate filter)The EPA filter filters air germs, smoke, and dust particles up to 1 µm in size with a rate of 99% or more. In combination with the multifunctional filter, the EPA filter can filter out microscopic particles with a diameter of more than 20 nanometers, including bacterial mold, dust, allergens, and some viruses. According to the World Health Organization, the coronavirus, avian influenza virus, influenza virus, and Legionella bacteria are larger than 20 nanometers.   6th level: Sterilizing UV LightUV sterilization with 365 nanometer UV wavelength light can kill a variety of airborne bacteria. The UV disinfection lamp is typically used for air, surface, and water disinfection. It can purify the air, eliminate musty odors, and produce a limited amount of anions. This makes the air fresh and prevents the spread of viruses in the air or on surfaces.   7th level: ionizationBy creating strong electric fields, ionizers can electrically charge individual air particles, thereby increasing the ion concentration in the room air. The charged particles are more reactive and can destroy odor molecules and other pollutants. At the same time, oppositely charged particles attract each other and form larger clumps that sink to the ground more quickly and can be more easily filtered from the air. "Questions & Answers on the topic of filters and filter changes can be found in our FAQs on filters for air purifiers."   Reduce pathogens in the air In untreated indoor air, numerous pathogens are usually found. This group includes mold spores, bacteria, animal hair, and especially house dust allergens (mite feces, excretions), but also heavy metals, soot, and mineral fibers. Particularly on warm days or during the heating season, large amounts of these suspended particles develop and are stirred up with the house dust in the indoor air. After being inhaled, the particles come into contact with our mucous membranes and trigger the known allergy symptoms. The HEYLO air purifier HL 400 can significantly reduce the concentration of these particulates and gases to create healthy indoor air. The device is used in the following areas: private residences, office spaces, conference and training rooms, schools and authorities, practices and fitness centers. In all areas where people are present, air purifiers can significantly improve air quality.  Technical Data (with Standard Filter Box) - HL 400Article Number: 1960006Ventilator air output max. (m³/h): 520Max. air performance (m³/h) with M-class filter: 360Electrical connection (V / Hz): 230 / 50Power consumption (kW): 0.09Current consumption (A): 0.4Length / Width / Height (mm): 200 / 400 / 600Weight (kg): 9.7Sound level (dB(A) / 3 m): 32 - 44Protection class (IP): XORoom size with 3-fold air exchange (approx. m²): 50Room size with 5-fold air exchange (approx. m²): 30

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.  

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages  "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually recognizable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.   questions and answersAre the leak detection dyes also suitable for murky water? Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer