The UNI 1 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected. It can measure the ranges of building moisture, air humidity, and temperature.'The UNI1 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'   • B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.• MB 35 for surface moisture measurement on concrete• MH 34 for measuring high moisture values (40–200%) in softwood• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and• all Pt 100 temperature sensors"We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.Characteristics• Handy quick moisture meter for lightning-fast single and series measurements• Direct display of moisture values on the large LCD display, resolution: 0.1 digit• Quick measurement of moisture in set building materials using the capacitive high-frequency measurement method• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology• Fully automatic device synchronizationscope of delivery The delivery includes the base station Uni1 without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data  Gann Article No.: 30001430 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V-Block battery (included in delivery) or Ni-Cd battery (special accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Learn more More Fewer

The UNI 2 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected, similar to the smaller model UNI1. Additionally, all construction moisture measuring electrodes that are based on the resistance measuring principle can be connected.The following measurement ranges can be determined.• building moisture• Humidity• Air temperature• Material temperature• Surface temperature'The UNI2 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'• B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.• MB 35 for surface moisture measurement on concrete• MH 34 for measuring high moisture values (40–200%) in softwood• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and• all Pt 100 temperature sensors.   "We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.Measuring ranges   building moisture: in resistance-based measurements: (*)0 - 80 Digits0.3 - 25 wt.% or 0.3 - 12 cm.%   in capacitive measurements: (*)0 - 199 Digits (Scan Area)0.3 - 8.5 wt.% or 0.3 - 6.5 CM-% with B 50, B 60 and LB 702 - 8 wt.-% with MB 35 on concrete surfaces   when measuring the relative humidity in the borehole: (*)5 - 98 % RH or0.2 - 3.7 wt.% with RH-T 37 EL and RH-T 37 EL flex   (wood moisture):40 - 200 % (atro) with MH 34 on softwood   Humidity: 5 - 98 % r.H. with RF-T 28, RH-T 37 EL and RH-T 37 EL flex   Temperature: -200 - +600 °C depending on Pt 100 temperature sensor   Infrared measurement range: -20 - +199.9 °C with IR 40 EL (*) = Moisture conversion in % depending on building material via conversion table   The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.Characteristics• Handy quick moisture meter for lightning-fast single and series measurements• Direct display of moisture values via the large LCD display, resolution: 0.1 digit• Quick measurement of moisture in set building materials using resistance and capacitive high-frequency measurement methods.• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology• Fully automatic device synchronizationscope of deliveryThe package includes the base station Uni2 without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 30001550 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V-Block battery (included in delivery) or Ni-Cd battery (special accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Learn more More Fewer

The M 20 is a penetration electrode for measuring wood moisture and construction moisture. It is based on the resistance measurement principle and can be connected to all corresponding "Gann" measuring devices. The electrode is suitable for moisture measurements of sawn timber (up to 50 mm thickness), chipboard and OSB boards, and parquet. With the help of a suitable striking device (e.g. hammer), the electrode can also be driven into hard woods such as beech. It is also applicable for measurements in soft bound building materials (e.g. plasters, gypsum, or aerated concrete) as well as insulation and insulating materials. Matching electrode pairs• M20-HW200, M20-HW300• M20-DS16, M20-DS16-i, M20-OF15• M20-Bi 200 and M20-Bi 300• M6-150 and M6-250Suitable base devices• Hydromette BL E• Hydromette HB 30• HT 85 T• M 4050• RTU 600• IT 2     The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 31003300Electrode M20 incl. 10 electrode tips of 16 and 23 mm 

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The M6 insertion electrodes are accessories for Gann professional measuring devices such as Uni2 and all hydrometers that are based on the resistance measurement method. The electrodes are always used in pairs. They measure the resistance between the two insertion tips, which should ideally be inserted into the test material at a distance of about 8 - 10 cm from each other.The M6 is suitable for measuring hard bound building materials (e.g. concrete or screed). "For use, you need a basic measuring device such as Uni1 or Uni2 as well as a measuring cable MK8. The delivery includes 10 electrode tips of 40 and 60 mm length each. The M6 also serves as a carrier for other electrode pairs:"Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250Suitable base devices• Hydromette BL E, Hydromette HB 30, HT 85 T, M 4050, RTU 600, UNI 2 The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 310037002 carrying handles, incl. 10 electrode tips of 40 and 60 mm

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The measuring cable MK 8 is an accessory for resistance-based measuring devices from Gann. It connects the base device with the corresponding measuring electrodes such as M6 and others.Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250  Suitable base devices• Hydromette BL E, BL H 40, BL H 41, BL HT 70, H 35, HB 30, HT 65, HT 85 T, M 2050, M 4050, RTU 600, UNI 2  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data  Gann Article No.: 31003750 Length: 1 m

Learn more More Fewer

The active electrode RFT 28 EL is a sensor for measuring air humidity and air temperature with a fast measurement speed. It is an addition to one of the Gann-Hydromette base stations listed below and cannot be operated independently of them.The fast response speed of the sensor allows for the detection of leaks, e.g. door gaps or leaky windows, as even slight air currents can influence the measurement display. The sensor also adapts to the ambient climate even when switched off. For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out.    Suitable base devices  The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2   The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data Gann Article No.: 31003155Measuring range humidity: 7 - 98 % r.H.Measuring range air temperature: -10 - +80 °CMeasurement tolerance humidity: ± 1.8 % (at 10-90% r.H.)Measurement tolerance air temperature: ± 0.75 °C (-10 to +55 °C) The response time of the air humidity sensor (slightly moving air, ambient temperature: 20 - 25 °C) is 20-30 seconds depending on the humidity difference.Warranty: 2 years  

Learn more More Fewer

The RHT 37 BL 160 is an electrode for measuring air humidity and air temperature - specifically suitable for use in bulk materials and solids (e.g. masonry or screeds). Its areas of application include moisture analysis, damage assessment, monitoring of construction drying, as well as testing the readiness for installation of floor and wall coverings.The sensor tube has a diameter of 5.5 mm, which also allows measurements in joints without having to risk damaging wall or floor tiles. "In conjunction with a hydrometer, the air humidity in the borehole can be measured and the degree of saturation or moisture content of certain set building materials can be determined using sorption isotherms." "For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out."Suitable base devicesBL UNI 11CH17

Learn more More Fewer