Dehumidifier and air purifier in one device with 95% air purity Enjoy indoor air. This design dehumidifier makes that and more possible. Equipped with two technologies for the permanent improvement of air quality, the combination devices eliminate unhealthy moisture in residential and commercial spaces, offices, retail stores, unheated conservatories, basements, and garages. Furthermore, the indoor air is purified in the integrated filter, removing 95 percent of disease-causing bacteria and viruses, mold spores, pollen, house dust, fine dust, allergens, and other pollutants. A permanent health protection for all individuals in the room – a noticeable relief, especially for allergy sufferers and those with house dust allergies.  Everything for healthier indoor air and more quality of life A hygrostat-controlled dehumidification automation with target selection of the desired humidity (30% to 80%), digital air quality sensors, four operating modes including night mode, and a two-stage fan ensure reliable dehumidification and air purification. For unattended continuous operation, the device is equipped with overflow protection and also has a rear hose connection to permanently drain the condensate extracted from the air via a hose. Conveniently, the front color LED display shows the status of the indoor air quality in three colors (Blue, Green, Red). A lit segment display in the LED display provides precise percentage information about the current humidity, the preset target humidity, and the remaining operating hours with the activated 24-hour timer for time-controlled switching on or off.  Seeing indoor air with different eyes: Air quality sensors "You cannot tell from the air whether it is too humid or contaminated with pathogens. If mold spores or viruses are floating invisibly in the air, this usually only becomes noticeable when it is already too late." The sensor sees what you cannot see. It continuously measures the room air humidity. Convenient is the front-facing color LED display of the current room air humidity: Blue: Indicates a humidity level below 50%Green: Indicates an optimal humidity level between 50 to 70 %Red: Indicates a humidity level above 70% "Cleaned and dehumidified room air makes the difference" A person breathes in and out between 10,000 and 20,000 liters of air per day. If the air is too humid and contaminated with pollutant particles or pathogens, it burdens our immune system and, in the worst case, leads to respiratory diseases. Likewise, furniture, fixtures, and even the building structure can be damaged by consistently high humidity (> 60 percent).  Combined protection against moisture and pathogens With its combined air purification and dehumidification technology, this all-rounder reliably prevents the formation of unhealthy moisture nests and associated moisture problems such as mold growth, stains, and dampness. The room air is purified in a dual filter system consisting of a pre-filter and a high-performance filter, removing virus-laden aerosols, viruses (such as SARS-CoV-2 and influenza viruses), bacteria, mold spores, fine dust, house dust, pet hair, and other airborne pathogens. It also reduces the growth of dust mites and allergens. A clean solution. The high-performance filter is consumable and should be replaced from time to time. The pre-filter is washable and can be reused repeatedly.  Auto-Restart Function The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.  The complete solution for a healthy indoor climate This 2-in-1 device is characterized by extensive comfort features, high ease of use, and the pleasantly low noise level, making the air purifiers also suitable for use in noise-sensitive environments. Hygrostat-controlled dehumidification automation: In the hygrostat-controlled dehumidification automation, the device operates continuously until the desired air humidity level is reached. This can be set between 30% and 80% in 5% increments. After that, the compressor automatically switches off. If the target value is exceeded again, the device activates automatically. Thus, the dehumidifier always ensures optimal room air humidity according to your needs. Continuous operation: Condensed water on walls, glass surfaces, or cold bridges, combined with insufficient ventilation, are common causes of moisture damage, as well as when water from outside penetrates through a poorly insulated wall or during flooding and heavy rain events into the basement. To maintain a permanently dry environment, the air dryer features a powerful continuous operation. In this operating mode, the room air is continuously dehumidified at maximum performance. Night Mode: Poor air quality caused by excessive humidity, unpleasant odors, or stuffy air can literally rob you of sleep. In night mode, the device cleans and dehumidifies the air with a gentle airflow and a dimmed control panel. For a restful sleep to recharge. Clothes drying function: For gentle air drying of laundry, the drying mode is recommended. The clothes drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. The air filter ensures that pollen and fine dust are not blown through the laundry and remain attached to it. 24-Hour Timer: This allows the operation to be turned on or off after a certain number of hours. In the bedroom, a combined air dehumidification and purification is recommended for a restful sleep – during the day, however, the device does not need to operate when one is out of the house. Similarly, dehumidification and air purification in the office or workplace are only necessary during working hours. For these and other usage scenarios, the device features a programmable 24-hour timer, which allows the operating time to be preset for automatic on or off switching in 1-hour increments. Thanks to the memory function, the operation can also be controlled with a standard timer switch if the device is to operate at the same times every day (for example, during off-peak hours).  air circulationIn this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device. Advantages at a Glance • Combined dehumidifier with high-performance air purifier (95% effective filtration of bacteria, viruses, pollen, fine dust, dust mites, mold spores, and other allergens as well as pollutants)• Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor automatically turns off. The fan continues to run to keep the air clean. If the level is exceeded, the device activates automatically.• Suitable for rooms up to 15 m² / 37 m³• Dehumidification capacity max. 12 liters / 24 hours• Air quality display with color LED• Display of relative humidity• Continuous operation for continuous dehumidification in unattended rooms• Timer function (1-24 hours)• Night mode (whisper quiet)• Auto-restart function (memory function)• Overflow protection – Device switches off after reaching the maximum capacity of the water tank.• Warning signal for full water tank• Water container approx. 2.5 liters• Two-stage blower• Connection option for a drain hose for continuous operation• Laundry drying function  Technical data  dehumidification performance at 30 °C / 80 % r.H. 10 liters / day air volume 90 m³/ h Maximum room size 20 m² (50 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C  moisture range 30 - 80 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.4 A Power consumption max. 245W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter refrigerant R290 (30g) GWP3 water bucket 2.5 Liter operating noise 45 dB(A) at 1 m distance 42 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 245 x 500 mm Weight 9.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and HEPA-Filter yes, efficiency 95% Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity, air quality Night mode and memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery (10 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Compact design, simple operation, and convincing features   This comfort dehumidifier is characterized by reliable operation, easy handling, and an affordable price. Thanks to its compact dimensions, it is handy and unobtrusive - it simply does its job in the background.   "It is equipped with a hygrostat-controlled dehumidification automatic system, allowing selection between target humidity levels of 40, 50, or 60%. Additionally, continuous operation is possible. It operates efficiently, and the operating noise for this dehumidification class is pleasant. With a capacity of up to 12 liters per day, it is capable of reliably keeping living and office spaces as well as basements up to an area of 25 m² dry."   The topic of safety is also well thought out: a light warns when the water container is full, and the overflow protection automatically shuts off the operation when the bucket is full. A viewing window also allows a look into the water tank, so the fill level can be checked at any time.     Dehumidification with comfort   Thanks to the direct hose connection, this dehumidifier can also be used in environments where regular manual emptying of the water tank is not always possible. For example, during unattended continuous drying operations in heated hobby rooms or holiday apartments.  The room air is cleaned of dust in the air intake area to prevent the interior of the device from becoming dirty. Additionally, a practical cable and plug holder, a stowable carrying handle, and steerable wheels provide easy transport when needed.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     air circulation   In this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. In a temperate environment, the device can dry about 1-2 loads of laundry per day.   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while using significantly less electricity.   "In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."       Propane (R290) as an environmentally friendly refrigerant in dehumidifiers "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection for 40, 50, or 60 % r.H.• Control panel with LED lighting• Memory function: after a power failure, the dryer resumes operation with unchanged settings -> connection to a timer possible• Continuous operation possible• Very compact and lightweight device in its performance class• Easily accessible air filter, easy to clean and reusable. Filters pet hair, lint, fluff, and dust.• Level warning light when bucket is full• Automatic shut-off when the bucket is full• Recirculation defrost automatic• Direct hose connection     Technical data   dehumidification performance at 30 °C / 80 % r.H. 12 liters / day air volume 118 m³/ h Maximum room size 25 m² (62 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C  moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.5 A Power consumption max. 350W Recommended Coverage 6 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (50g) GWP3 water bucket 2.1 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 215 x 320 x 420 mm Weight 11.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and cable holder and Display shows current room humidity, set air humidity, air quality memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The robust and powerful all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely requires servicing, and is very affordable considering its power and quality."  Easy handling The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat, and continuous operation is also possible. With the used lamella evaporator, target humidities below 40% r.H. are difficult to achieve; however, this technology shows impressive dehumidification power in temperate and humid environments. Particularly useful in larger areas is the high air circulation volume of a substantial 1000 cubic meters per hour. With its stable trolley construction and large wheels, frequent relocation to different sites can be easily carried out.  Bucket, direct hose connection and optional pump kit The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards. "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     For continuous operation on construction sites   The possibility of connecting an external condensate drain – optionally with a condensate pump if needed – makes the construction dryer also ideally suited for longer unattended drying tasks, e.g. in construction drying.     Optional counters The delivery does not include an hour or consumption meter. You can order these from us if desired (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional)• Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % r.H. 55 liters / day air volume 1000 m³/ h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 6.1 A Power consumption max. 1400W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 Liter operating noise 54 dB(A) at 1 m distance 51 dB(A) at a distance of 2.5 m Dimensions L x W x H 530 x 500 x 965 mm (incl. guide bracket) Weight 39 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

Trotec TTK 355 S – Kraftvoller Bautrockner für härteste Einsätze Ob bei der schnellen Reduktion hoher Luftfeuchtigkeit oder zur zuverlässigen Trocknung grossvolumiger Räume – der TTK 355 S ist exakt für solche Herausforderungen konzipiert. Seine beeindruckende Leistung verdankt das Gerät der effektiven Kombination eines leistungsstarken Rollkolbenkompressors mit einem Qualitätsgebläse, das Luftmengen von bis zu 490 m³/h verarbeitet. Diese hohe Luftumwälzung erlaubt es dem optimierten Wärmetauschersystem, kontinuierlich große Mengen Feuchtigkeit aus der Raumluft zu ziehen – bis zu 70 Liter pro Tag mit nur einem Gerät. Ein besonderes Plus bietet die integrierte Heissgas-Abtauautomatik: Sie verhindert Entfeuchtungspausen durch feste Abtauintervalle, wie sie bei vielen anderen Geräten üblich sind, und sorgt so für eine gleichmässige und effiziente Leistung – selbst bei kühleren Einsatzbedingungen. Mobilität trifft auf Robustheit Auch für wechselnde Einsatzorte und raue Umgebungen ist der TTK 355 S bestens gerüstet. Das robuste Fahrgestell mit praktischer Griffbügelstange und grossen Gummirädern macht den Transport – auch über Treppen oder unebenen Boden – denkbar einfach. Die verbauten Gummiräder sind abriebfest und hinterlassen keinerlei Spuren auf empfindlichen Bodenbelägen. Dank der Rollkolbenkompressor-Technologie kann der TTK 355 S zudem in nahezu jeder Position transportiert werden. Ein spezielles Schutzsystem für die Elektronik bewahrt die sensiblen Komponenten zuverlässig vor Feuchtigkeit und Schmutz – für eine lange Lebensdauer auch unter Baustellenbedingungen. Durchdachtes Design – innen wie aussen Auch optisch überzeugt der TTK 355 S: Die Technik steckt in einem funktional gestalteten, widerstandsfähigen Gehäuse im markanten Trotec-Industriedesign – formschön, geschützt und praxisorientiert. Der stapelbare Aufbau mit praktischen Nutführungen auf der Oberseite ermöglicht eine platzsparende Lagerung und einen sicheren Transport mehrerer baugleicher Geräte. Ihre Vorteile auf einen Blick: 100 % Trotec – Entwicklung, Design und Fertigung Hohe Entfeuchtungsleistung, auch bei niedrigeren Temperaturen Schutz der Elektronik vor Staub und Feuchtigkeit Wartungsfreundliche Konstruktion Einfaches Handling und flexibler Transport Rollkolbenkompressor: transportabel in jeder Lage Stapelbar für Lagerung und Transport Multistapelfähig mit baugleichen Modellen Integrierter Hitzeschutz für den Kompressor Deutsches Industriedesign mit Geschmacksmusterschutz Sicherer Betrieb bei hoher Wärme- und Feuchtelast Bei der Sanierung von Wasserschäden oder ähnlichen Anwendungen herrschen oft extreme Bedingungen: hohe Luftfeuchte bei gleichzeitig hohen Temperaturen. Dies stellt eine grosse Belastung für Kältetrockner dar. Die sogenannte „35er-Regel“ verdeutlicht die Problematik: Liegt die Raumtemperatur dauerhaft über 35 °C, sinkt die Lebensdauer herkömmlicher Kältetrockner drastisch – auf weniger als 35 %. Ursache ist der steigende Druck im Kältemittelkreislauf, der den Kompressor stark belastet. Zwar arbeiten die Geräte zunächst weiter, sie operieren aber weit über ihrer Belastungsgrenze, was zu vorzeitigem Ausfall führen kann. Adsorptionstrockner stellen unter solchen Bedingungen keine wirtschaftliche Alternative dar – ihr Energiebedarf ist bei vergleichbarer Entfeuchtungsleistung deutlich höher. Intelligente Schutzfunktion serienmässig Deshalb sind die TTK-S-Modelle mit einem intelligenten Kompressor-Hitzeschutz ausgestattet. Sensoren kontrollieren kontinuierlich die Temperaturentwicklung im Gerät. Bei Überhitzung schaltet sich der Kompressor automatisch ab, während der Ventilator weiterläuft. Sobald sich das System wieder im sicheren Temperaturbereich befindet, nimmt der Kompressor selbstständig den Betrieb wieder auf. Dieser Schutzmechanismus verlängert nicht nur die Lebensdauer des Geräts, sondern schützt zugleich die zu trocknenden Materialien und die Gebäudesubstanz vor hitzebedingten Schäden. Entfeuchtungsleistung bei 20 °C / 60 % r.F. 27  Liter / Tag bei 30 °C / 80 % r.F. 55  Liter / Tag Technische Daten Luftmenge Stufe max. 490 m³/h Raumgrösse  140 m² / 350 m³ Temperaturbereich min.  5 - 32 °C Feuchtebereich min.  40 - 90 % r.F. Netzanschluss 220 - 240 V, 50 Hz Nennstromaufnahme 6.1 A Leistungsaufnahme 1.4 kW empfohlene Absicherung 10 A Anschlussstecker EU-Stecker mit Schweizer Fixadapter Kabellänge 3 m Rollkolbenkompressor   Kältemitteltyp R-454C Kältemittelmenge 650 g GWP Faktor 146 CO2 -Äquivalent 0.0949 t Druck Saugseite  0.6 Mpa Druck Austrittseite 2.2 Mpa max. zulässiger Druck 3 Mpa Masse (H x B x T) 725 x 380 x 390 mm Gewicht 39 kg Wassereimer 6  Liter + direkter Schlauchanschluss Schallpegel in Abstand 1 m 54 dB(A) Trotec Artikel-Nr. 1.120.000.163 Garantie 2 Jahre

Learn more More Fewer

Comfort, design, and high air performance   This dehumidifier impresses with its elegant design and thoughtful functionality. Its diverse features include a total of four operating modes. Here, the dehumidifier offers a hygrostat-controlled dehumidification automatic with a target value selection between 35 and 85% relative humidity in comfortable 5% increments, including an optional turbo fan.   A popular alternative to the dehumidification automatic function is the comfort function, where the humidity level is automatically adjusted to a comfortable value depending on the temperature. Additional operating modes include a laundry drying function and a permanent function.     Comfort function: Temperature-dependent air dehumidification   To achieve an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended when using programmable heating systems. If the room temperature changes during the day or at night, the dehumidifier automatically adjusts its dehumidification performance. This protects against mold formation and saves electricity.      Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Practical Functions   When drying residential and office spaces of up to around 40 m², this dryer is an absolutely reliable partner. Various details simplify operation, such as the viewing window on the tank, which makes the fill level easily recognizable, the practical timer function, the fill level warning light when the water container is full, and the overflow protection with automatic shut-off. The air filter is easy to remove and wash. When the tank is full, a float automatically interrupts operation.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with unchanged settings after a power interruption as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be used to significantly accelerate the drying of laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.     Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection between 35 and 85 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor (i.e., the dehumidification) automatically pauses. The fan continues to run to determine the actual humidity in the room. If it exceeds the limit, the device automatically switches back on.• Comfort operation for temperature-dependent automatic control of humidity for optimal room climate at all times• Continuous operation• Auto-restart function for use with an external timer• Display of relative humidity• Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Laundry drying function• Timer Function• Recirculation defrost automatic• Connection for external condensate drainage• 3 fan speeds• Level warning light when water tank is full• Automatic shutdown when tank is full thanks to float   Technical data  dehumidification performance at 30 °C / 80 % r.H. 16 liters / day air volume 150 m³/ h Maximum room size 40 m² (100 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.2 A Power consumption max. 430W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (75g) GWP3 water bucket 3 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 350 x 510 mm Weight 15 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 3-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

The 650S is a robust and powerful construction dryer that stands out for its versatility. It effortlessly handles demanding tasks such as drying after water damage, new construction drying, and maintaining dryness in heated and unheated storage rooms. Manufactured in a specialized European facility, this dehumidifier impresses with its high-quality workmanship and reliable operation. The durable construction of the 650S guarantees a long lifespan, while the easy maintenance and low upkeep costs make operation even more economical. Despite its impressive performance and quality, the 650S is available at an extremely attractive price, making it an excellent choice for professional users.Easy to use The desired target humidity can be continuously regulated between 32 - 100 % using a mechanical hygrostat, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 925 cubic meters per hour. With its stable cart construction and large wheels, frequent changes of location can be easily carried out.     Direct hose connection and optional pump kit   Due to its very high dehumidification performance, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a slope towards the drain. If this is not possible, a suitable pump kit is optionally available, which can pump the water upwards and also outwards.   The operating switch is protected against dust and splashes by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position.     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in the range above 40% humidity. Technically, the dryer can be used at room temperatures down to about 5°C, even in unattended continuous operation.     Optional counters   Included in delivery is no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 91 liters / day Air volume 925 m³/ h Maximum room size 230 m² (550 m³) Minimum room size 4 m² Temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. voltage 220 - 240 V/50 Hz Nominal current consumption max. 9.5 A Power consumption max. 2100 W Recommended Coverage 16 A Cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter Operating noise 56 dB(A) at 1 m distance53 dB(A) at a distance of 2.5 m Dimensions L x W x H 616 x 511 x 1022 mm (incl. guide bracket) Weight 52 kg Automatic defrosting Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower Prefilter and Timer no (operation on timer possible) Continuous operation possible and Memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 16 mm Pump optional available (not included in the delivery) Guarantee 2 years

Learn more More Fewer

Good, affordable household dehumidifier This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower outlet. The hose must be laid with a downward slope, as no pump is included in the device. The hose connection is particularly well designed in this model: if the hose is not permeable or is incorrectly laid (kinked, insufficient slope, etc.), the water is automatically redirected into the bucket, which automatically shuts off the device when full. In other models, backed-up water can lead to leakage from the bottom, which is prevented in this model.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 1-2 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off  Technical data  dehumidification performance at 30 °C / 80 % r.H. 20 liters / day air volume 150 m³/ h Maximum room size 50 m² (125 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 1.8 A Power consumption max. 420W Recommended Coverage 10 A Cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (86g) GWP3 water bucket 3 Liter operating noise 43 dB(A) at 1 m distance 40 dB(A) at a distance of 2.5 m Dimensions L x W x H 253 x 340 x 570 mm Weight 12.5 kg defrosting automatic Electronic, Recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter guarantee 2 years       Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Der kompakte Turbolüfter TFV 30 S zeichnet sich durch seine flexible Einsetzbarkeit und robuste Konstruktion aus. Das Gehäuse besteht aus unverwüstlichem Polyethylen, was es leicht und widerstandsfähig macht. Der TFV 30 S ist als Universalausrüstung für Sanierungs-, Reinigungs- und Handwerksunternehmen konzipiert. Die Kombination aus Robustheit, Leistung, kompakten Abmessungen und einem ausgezeichneten Preis-Leistungs-Verhältnis macht die Turbolüfter der TFV S-Serie zur optimalen Wahl. Das Gerät kann in drei verschiedenen Aufstellwinkeln (0°, 45° oder 90°) betrieben und gelagert werden und gewährleistet dabei in jeder Position einen sicheren Stand. Der Lüfter ist zudem stapelbar. Die Luftleistung ist dreistufig regulierbar. Als modernes Feature verfügt die neueste Generation des Radialventilators über eine integrierte Steckdose am Bedientableau zur Stromversorgung weiterer Geräte. Vorteile Der TFV 30 S ist mit zweiflutigen Radialventilatoren ausgestattet, die eine extra große Spezial-Welle besitzen. Alle inneren Bauteile bestehen aus Metall, und der Motor verfügt über Qualitäts-Kugellager, was eine einseitige Belastung der Welle verhindert. Das Gerät bietet eine hohe Energieeffizienz (leistungsstark und energiesparend zugleich). Robustes Gehäuse aus Polyethylen. Betrieb und Lagerung in mehreren Winkelstellungen möglich. Motor mit Qualitäts-Kugellager für hohe Langlebigkeit. Integrierte EU-Steckdose am Bedientableau (Einstecker 2-poliger CH-Stecker möglich) Technische Daten   Stufe Luftmenge [m³/h] Max. Luftdruck [Pa] Leistungsaufnahme [kW] 1 1350 370 0.71 2 1880 400 0.78 3 2250 525 1.05 Schallpegel (in 3 m Abstand) Stufe 1 73.5 dB(A) Stufe 2 80.8 dB(A) Stufe 3 86.2 dB(A) Luftmenge (dreistufig) 1350 / 1880 / 2250 m³/h Maximaler Luftdruck 525 Pa Maximale Fördermitteltemperatur 60 °C Nennspannung 230 V Leistungsaufnahme 1.05 kW Maximale Stromaufnahme 5.2 A Stromanschluss Schuko / CEE 7/7 mit Schweizer Fixadapter Kabellänge 5 m Abmessungen (L x B x H) 545 x 515 x 490 mm Gewicht 16.5 kg Garantie 2 Jahre Hinweis: Der auf Produktbildern abgebildete 3er Verteiler und die Luftschläuche sind nicht im Standard-Lieferumfang enthalten.

Learn more More Fewer

This nozzle is designed to allow the entire air volume of the incoming or outgoing air to circulate under the door.  The nozzle is pushed under the door and connected to air hoses on both sides of the door. To ensure that the entire volume of air can be transported under the door, the passage inside the nozzle is expanded to the maximum width, allowing the air to circulate well despite the low flow height. A protective mat (protector) protects the floor underneath from scratches.  In this way, the complete drying installation can be flexibly relocated to rooms that have minimal noise disturbance for the affected party. Furthermore, the drying time is reduced if the room can remain closed. The nozzle is designed as standard for connecting hoses with a 38 mm inner diameter. For the use of 50 mm hoses, a separate adapter ring is available, which can be easily slipped over the nozzle to increase the diameter.  Technical data  connection nozzle I 2 on both sides suitable hose diameter 38 mm Masse (B x H x T) 400 x 74 x 157 mm Weight 1.7 kg Trotec article no. 6.100.000.160 guarantee 2 years

Learn more More Fewer