These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether at the workplace, in the living area, or in the bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides warmth directly where it is needed by the residents as a supplementary heating solution. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 700W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.72 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.2 A Power consumption max. 0.70 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without stand feet) Weight 6 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.014 Guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

Die Windmaschine TTW 12000 S  Für alle Belüftungsaufgaben in Produktionsumgebungen, Landwirtschaft oder Lagerbereichen, wo hohe Luftwechselraten auch mit wenig Investitionsaufwand realisierbar sein sollen, ist die Windmaschine TTW 12000 S eine optimale Wahl. Sie ist bei Bedarf auch in der noch kräftigeren Ausführung "TTW 25000 S" und "TTW 35000 S" erhältlich. Hohe Luftleistung und robuste Bauweise Aufgrund der zweistufig regelbaren Luftleistung von bis zu 13'200 m³/h können mit diesem robusten Trommelventilator die erforderlichen Luftwechselraten auch in großen Räumen oder Hallen erreicht werden. Das galvanisierte Stahlgehäuse ist dank Fahrrahmen einfach transportierbar und trägt eine neigbare Ventilatortrommel zur variablen Ausrichtung der Windmaschine bis auf eine senkrechte Strömungsposition. Auf diese Weise lässt sich der Luftstrom gezielt auch an hohe Wand- oder Deckenbereiche lenken, was die Windmaschine TTW 12000 S auch zur flexibel einsetzbaren Lösung bei Effektbelüftungen für Bühne, Film- und Fotosets macht. Vorteile für die Praxis Budgetschonende Option für semiprofessionelle Belüftungsanwendungen Luftumwälzungskapazität bis 13'200 m³/h Steckerfertiges Gerät mit einfacher Handhabung Justierbarer Neigungswinkel der Strömungsrichtung von horizontaler bis senkrechter Position Flexibler Ortswechsel durch Fahrwagenkonstruktion Technische Daten Trotec Artikel-Nr. 1510004010 Dimensionen und Gewicht Tiefe ohne Verpackung 280 mm Breite ohne Verpackung 815 mm Höhe ohne Verpackung 810 mm Gewicht ohne Verpackung 16 kg Technische Spezifikationen Gebläsestufen 2 Max. Fördermitteltemperatur 40 °C Wurfweite (Innenräume) 5 m Luftmenge und -druck Max. Luftmenge 13'200 m³/h (frei ausblasend) Max. Luftdruck 90 Pa Energie und Elektrik Nennstromaufnahme 0.7 A Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme max. 0.187 W Empfohlene Absicherung/Vorsicherung 10 A Kabellänge 2.3 m Anschlussstecker (Bezeichnung) CEE 7/7 mit Schweizer Fixadapter Akustische Daten Schallpegel Stufe 1 (Abstand 1m) 55 dB(A) Schallpegel Stufe 3 (Abstand 1m) 65 dB(A) Ausführung und Mobilität Lüfterflügel-Material Metall Ventilatortyp axial Luftstrom ausblasend Gehäuseausführung Metall Mobilität fahrbar (Stapler, gummibereifte Metallräder) Garantie 2 Jahre

Learn more More Fewer

Die Windmaschine TTW 25000 S  Für alle Belüftungsaufgaben in Produktionsumgebungen, Landwirtschaft oder Lagerbereichen, wo hohe Luftwechselraten auch mit wenig Investitionsaufwand realisierbar sein sollen, ist die Windmaschine TTW 25000 S eine optimale Wahl. Sie ist bei Bedarf auch in der noch kräftigeren Ausführung "TTW 35000S" erhältlich. Hohe Luftleistung und robuste Bauweise Aufgrund der zweistufig regelbaren Luftleistung von bis zu 27'600 m³/h können mit diesem robusten Trommelventilator die erforderlichen Luftwechselraten auch in großen Räumen oder Hallen erreicht werden. Das galvanisierte Stahlgehäuse ist dank Fahrrahmen einfach transportierbar und trägt eine neigbare Ventilatortrommel zur variablen Ausrichtung der Windmaschine bis auf eine senkrechte Strömungsposition. Auf diese Weise lässt sich der Luftstrom gezielt auch an hohe Wand- oder Deckenbereiche lenken, was die Windmaschine TTW 25000 S auch zur flexibel einsetzbaren Lösung bei Effektbelüftungen für Bühne, Film- und Fotosets macht. Vorteile für die Praxis Budgetschonende Option für semiprofessionelle Belüftungsanwendungen Luftumwälzungskapazität bis 27'600 m³/h Steckerfertiges Gerät mit einfacher Handhabung Justierbarer Neigungswinkel der Strömungsrichtung von horizontaler bis senkrechter Position Flexibler Ortswechsel durch Fahrwagenkonstruktion Technische Daten Trotec Artikel-Nr. 1510004020 Dimensionen und Gewicht Tiefe ohne Verpackung 525 mm Tiefe mit Verpackung 395 mm Breite ohne Verpackung 1090 mm Breite mit Verpackung 900 mm Höhe ohne Verpackung 1140 mm Höhe mit Verpackung 1150 mm Gewicht ohne Verpackung 44 kg Gewicht inklusive Verpackung 49 kg Technische Spezifikationen Gebläsestufen 2 Max. Fördermitteltemperatur 40 °C Wurfweite (Innenräume) 8 m Luftmenge und -druck Luftmenge Stufe 1 21'000 m³/h Luftmenge Stufe 2 27'600 m³/h Max. Luftmenge (Typ) 27'600 m³/h (frei ausblasend) Max. Luftdruck 160 Pa Energie und Elektrik Nennstromaufnahme 2.8 A Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme gesamt 650 W Leistungsaufnahme Stufe 1 0.52 kW Leistungsaufnahme Stufe 2 0.65 kW Empfohlene Absicherung/Vorsicherung 16 A Kabellänge 2.3 m Anschlussstecker (Bezeichnung) CEE 7/7 mit Schweizer Fixadapter Akustische Daten Schallpegel Stufe 1 (Abstand 1m) 65 dB(A) Schallpegel Stufe 2 (Abstand 1m) 75 dB(A) Ausführung und Mobilität Lüfterflügel-Material Metall Ventilatortyp axial Luftstrom ausblasend Gehäuseausführung Metall Mobilität fahrbar (Stapler, gummibereifte Metallräder) Garantie 2 Jahre

Learn more More Fewer

Die Windmaschine TTW 35000 S – Leistungsstark und Flexibel Für alle Belüftungsaufgaben in Produktionsumgebungen, Landwirtschaft oder Lagerbereichen, wo hohe Luftwechselraten auch mit wenig Investitionsaufwand realisierbar sein sollen, ist die Windmaschine TTW 35000 S eine optimale Wahl. Hohe Luftleistung und robuste Bauweise Aufgrund der zweistufig regelbaren Luftleistung von bis zu 32'400 m³/h können mit diesem robusten Trommelventilator die erforderlichen Luftwechselraten auch in großen Räumen oder Hallen erreicht werden. Das galvanisierte Stahlgehäuse ist dank Fahrrahmen einfach transportierbar und trägt eine neigbare Ventilatortrommel zur variablen Ausrichtung der Windmaschine bis auf eine senkrechte Strömungsposition. Auf diese Weise lässt sich der Luftstrom gezielt auch an hohe Wand- oder Deckenbereiche lenken, was die Windmaschine TTW 35000 S auch zur flexibel einsetzbaren Lösung bei Effektbelüftungen für Bühne, Film- und Fotosets macht. Vorteile für die Praxis Budgetschonende Option für semiprofessionelle Belüftungsanwendungen Luftumwälzungskapazität bis 32'400 m³/h Steckerfertiges Gerät mit einfacher Handhabung Justierbarer Neigungswinkel der Strömungsrichtung von horizontaler bis senkrechter Position Flexibler Ortswechsel durch Fahrwagenkonstruktion Technische Daten Trotec Artikel-Nr. 1510004025 Dimensionen und Gewicht Tiefe ohne Verpackung 1290 mm Tiefe mit Verpackung 1250 mm Breite ohne Verpackung 525 mm Breite mit Verpackung 395 mm Höhe ohne Verpackung 1210 mm Höhe mit Verpackung 1270 mm Gewicht ohne Verpackung 49 kg Gewicht inklusive Verpackung 55 kg Technische Spezifikationen Gebläsestufen 2 Max. Fördermitteltemperatur 40 °C Wurfweite (Innenräume) 10 m Luftmenge und -druck Luftmenge Stufe 1 24'600 m³/h Luftmenge Stufe 2 32'400 m³/h Max. Luftmenge (Typ) 32'400 m³/h (frei ausblasend) Max. Luftdruck 160 Pa Energie und Elektrik Nennstromaufnahme 3.2 A Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme gesamt 750 W Leistungsaufnahme Stufe 1 0.62 kW Leistungsaufnahme Stufe 2 0.75 kW Empfohlene Absicherung/Vorsicherung 16 A Kabellänge 2.3 m Anschlussstecker (Bezeichnung) CEE 7/7 mit Schweizer Fixadapter Akustische Daten Schallpegel Stufe 1 (Abstand 1m) 65 dB(A) Schallpegel Stufe 2 (Abstand 1m) 75 dB(A) Ausführung und Mobilität Lüfterflügel-Material Metall Ventilatortyp axial Luftstrom ausblasend Gehäuseausführung Metall Mobilität fahrbar (Stapler, gummibereifte Metallräder) Garantie 2 Jahre

Learn more More Fewer

Reliable dehumidifier with solid drying performance This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower-lying drain. The hose must be laid with a downward slope, as no pump is included in the device.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 2-3 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concern.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off•  Hot gas defrosting: faster automatic self-defrosting in cooler environments.   Technical data  dehumidification performance at 30 °C / 80 % r.H. 25 liters / day air volume 215 m³/ h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.4 A Power consumption max. 570W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Semi-professional dehumidifier for basements, construction sites, and laundry drying   This comfort dehumidifier protects and preserves what is dear and valuable to you. It is suitable for both robust dehumidification tasks in basements and laundry rooms, as well as for professional use in drying water damage or for keeping construction sites dry. Thanks to hot gas defrosting, it is also recommended for optimal drying results at low temperatures.     The all-rounder: Protects against mold, corrosion, and construction damage Excess moisture in the indoor air (> 60 percent) provides an ideal environment for pathogens. Mold also spreads in living spaces starting from this value, increasing the risk of respiratory diseases. Classic cars in the garage, artworks on the walls, and archived documents and books also suffer from excessive humidity. The causes of harmful humidity are diverse: deficiencies in building sealing, insufficient ventilation, as well as storms, flooding, or leaks in water-carrying pipes. The 122E keeps it dry.     Compact design – outstanding dehumidification performance Whether as a room climate improver in private settings or as a dehumidifier in commercial use – the cuboid stainless steel dehumidifier impresses with its comfortable features (e.g. 24h timer and auto-restart function as well as control panel lock function), an 8-liter condensate tank, and a strong dehumidification performance of 38 l/24 h at an air volume of 240 m³/h – sufficient for room sizes up to 100 m² or 250 m³. Thanks to the auto-restart function (memory function), the device automatically starts again in the pre-selected settings after a brief power interruption. For maximum user comfort, the control panel is equipped with easy-care membrane buttons and a digital display of room temperature and humidity. The target humidity can be set in 5 percent increments. Standard features also include a fill level warning light for a full water tank, overflow protection with automatic shut-off, and a reusable air filter that is easy to clean.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity."In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."    Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.     A dehumidifier for all occasions • Optimal suited for a healthy indoor climate in living areas• Moisture protection in archives, libraries, and art exhibitions• Corrosion and mold protection in (classic car) garages, basements, and storage rooms• Construction site drying and drying of damp masonry after water damage     Connection for external condensate drainage "For applications where regular emptying of the 8-liter condensate container is either not possible or undesirable, such as during unattended continuous drying operations in the basement, garage, holiday home, or on boats, the dryer features a built-in hose connection for direct drainage of the condensate into a drain. A short piece of suitable hose is already included in the delivery."     Hot gas defrosting automatic for faster drying results In low temperature ranges (below 12 °C), the integrated hot gas defrosting automatic system ensures consistently reliable air dehumidification – without long defrosting phases. Unlike the time-consuming recirculation defrosting of normal condensate dryers, the defrosting occurs through hot gas injection into the evaporator. This significantly shortens the duration of defrosting and achieves the drying goal more quickly.     SuperDry function for accelerated textile drying Practically for the quick dehumidification of wet laundry, clothing, or carpets is the special SuperDry function. This allows even large textiles to dry in no time, which do not fit in the tumble dryer.    Advantages at a Glance • Quality hot gas defrost automatic system• SuperDry function for accelerated textile drying• Automatic hygrostat-controlled dehumidification operation with real value humidity preset• Activated carbon filter against unpleasant odors• 24-hour timer• Auto-restart function (memory function) • suitable for construction drying • suitable for drying damp basements• suitable for laundry drying• Permanent mode• Easy-care material mix with a distinctive look• Digital display of current humidity and temperature values• Locking function of the control panel (child safety)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 38 liters / day air volume 240 m³/ h Maximum room size 100 m² (100 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 35°C moisture range 30 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.9 A Power consumption max. 750W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (96g) GWP3 water bucket 8 Liter operating noise 52 dB(A) at 1 m distance49 dB(A) at a distance of 2.5 m Dimensions L x W x H 453 x 310 x 635 mm Weight 27.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Professional construction dehumidifier with large bucket A high-quality dehumidifier for commercial use and water damage drying, manufactured in Europe. Its impressive exterior appearance is matched by its internal values: all electrical components are specially encapsulated, protecting the electronics from harmful deposits that could impair their function and longevity. Therefore, this dryer is also ideally suited for use under demanding conditions. Thanks to its maintenance-friendly design, it is easy to care for. "Compared to more affordable piston compressors, the high-quality 0.58 kW rotary compressor installed here offers the advantage of higher performance with comparatively lower power consumption – and additionally provides reserves for high dehumidification performance even in unheated rooms."In addition, the high-quality hot gas defrosting automatic system ensures a much more efficient dehumidification performance compared to other defrosting devices, without time interval-related defrosting pauses during which no dehumidification takes place.  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).  Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.  User-friendly Thanks to its durable housing, ergonomic grip recesses with an internal grip clip, and four sturdy wheels with a roll stop, the device is ideally suited for use on construction sites and for drying water damage. However, these advantages are also appreciated in commercial spaces or in private basement environments. The storage is also well thought out: two practical stacking grooves on the top of the device allow for a stable and space-saving stacking during transport and in storage.   An integrated operating hour meter reliably documents the exact duration of use even during longer drying operations.   Integrated compressor thermal protection with automatic shut-off   In drying operations with extremely high humidity and simultaneously high temperatures – for example, during water damage restoration – refrigerant dryers quickly enter their red performance zone. Here, the catchy "35 rule" applies: water damage above 35 degrees reduces the dryer’s lifespan to below 35%. However, this is not a question of component quality, but pure physics, which applies independently of the manufacturer to all refrigerant dryers on the market.  While most professional condensate dryers can still operate without issues at moderate humidity around 70% r.F. up to 35 °C, very high humidity combined with high room temperature results in significantly more energy being supplied to the humid air, which must be additionally "processed" through the refrigerant. Consequently, the pressure of the refrigerant in the system increases immensely, leading to a destructive load on the compressor. Although the dehumidifiers will initially continue to operate, they will do so well beyond their limit "deep in the dark red zone," resulting in an extremely shortened remaining lifespan.  "Therefore, the commercial dehumidifiers of the TTK-S series are equipped with an integrated compressor thermal protection for the active preservation of your devices:"Sensors continuously monitor the thermal load of the compressor. If the temperature is within the defined operating range, the integrated heat protection indicator pulses in a long sequence, indicating optimal operation of the dehumidifier. As soon as the temperature exceeds the critical threshold of 35 °C, the automatic system switches off the compressor to protect it, while the fan continues to operate, and automatically reactivates the compressor as soon as the 35° threshold is fallen below again. This protection not only significantly extends the lifespan of the dehumidifiers, but also prevents thermal damage to materials in the room and the building structure during their use.   Options • Dual meter available for additional recording of electricity consumption.• high-performance condensate pump for permanent drying with a pumping capacity of up to 50 m distance and a maximum delivery height of 4 m  Advantages at a Glance • High dehumidification performance even at low temperatures • Maximum dust and moisture protection for all electrical components• Extremely maintenance-friendly design • Optimal handling characteristics • Thanks to the roll piston compressor, it is transportable and storable in any position. • Practical stacking groove for stable, space-saving storage and transport • Multistage capability with identical models• Practice-oriented industrial design• Made in Europe  Technical data  dehumidification performance at 30 °C / 80 % r.H. 28 liters / day air volume 250 m³/ h Maximum room size 70 m² (175 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C moisture range 35 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.3 A Power consumption max. 500W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 375 x 345 x 603 mm Weight 26 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   

Learn more More Fewer

"Striking in technical features, modest in price: The dehumidifier with built-in condensate pump."     Comfort function: Temperature-dependent air dehumidification   "For an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended for use in rooms with temperature fluctuations throughout the day or year. If the room temperature changes, the dehumidifier automatically adjusts its dehumidification performance."     Effective and simple   The device also naturally features a hygrostat-controlled dehumidification automation. A fixed air humidity value is selected, which should not be exceeded. The adjustable range is between 35 and 85% relative humidity, in 5% increments. If the value is exceeded, the dehumidifier automatically activates and switches off by itself in an energy-saving manner as soon as the desired target value is reached.     Gentle laundry drying with dehumidifiers   "In addition to dehumidifying the room air, the dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumbler. The laundry drying function is comparable to traditional air drying outdoors."   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, with significantly less energy consumption. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns. In contrast to pure air drying, the laundry becomes softer and more pleasant to wear against the skin because the garments move in the gentle breeze of the dryer during the drying process.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Convincing Features   The timer function, a fill level warning light for a full water tank, the overflow protection with automatic shut-off, and a laundry drying mode complete the comfort features of this TTK dehumidifier. In addition, the integrated, washable air filter allows for additional air purification by extracting dust or pet hair. Thanks to its wheels and practical carrying handles, the device is also well-prepared for flexible relocation. The operation is easy and low-maintenance due to its comfortable features.     Bucket, direct hose connection and integrated condensate pump   The water that is extracted from the air is collected in a standard 6-liter bucket. A float switch automatically stops the operation when the bucket is full. Alternatively, the water can also be directed through a hose to a lower drainage point. If no floor drain is available, the water can be pumped up to 4 meters high using the built-in pump in the device, for example into a sink, out of a basement window, or even one floor up. Direct drainage is particularly convenient in unattended operation, as it eliminates the need to empty the bucket (hobby rooms, holiday apartments, drying of water damage, etc.).    The integrated pump is not suitable for continuous operation.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Advantages at a Glance • Hygrostat-controlled dehumidification automation with selectable target value between 35 and 85 % r.H. in 5 % steps• Comfort operation for temperature-dependent automatic control of humidity• Overflow protection with automatic shutdown when the bucket is full • Level warning light when water tank is full• Connection for external condensate drainage with integrated condensate pump• Pump-out function for faster condensate drainage• Optional fully automatic or continuous operation• Easily readable, illuminated display• Display of relative humidity• Laundry drying function• Timer Function• 2 fan speeds • Cable winding     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 47 liters / day air volume 375 m³/ h Maximum room size 120 m² (100 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C moisture range 35 - 100 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 5.4 A Power consumption max. 1060W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss fixed adapter refrigerant R290 (145g) GWP3 water bucket 6 Liter Pump integrated, lifting height up to 4 m operating noise 50 dB(A) at 1 m distance47 dB(A) at a distance of 2.5 m Dimensions L x W x H 282 x 392 x 616 mm Weight 19.5 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The universal all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 170S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely needs servicing, and is very affordable considering its power and quality.".     Easy handling   "Using a mechanical hygrometer, the desired target humidity can be continuously adjusted between 32 - 100%, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 580 cubic meters per hour. With its stable cart construction and large wheels, frequent relocation to different usage sites can be easily carried out."     Bucket, direct hose connection and optional pump kit   The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards.   "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in areas above 40% humidity. Technically, the dryer can also be used in lower ranges down to about 5°C, even in unattended continuous operation.     Optional counters   The delivery includes no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)   Technical data  dehumidification performance at 30 °C / 80 % r.H. 40 liters / day air volume 580 m³/ h Maximum room size 100 m² (250 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.8 A Power consumption max. 600W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 540 x 490 x 963 mm (incl. guide bracket) Weight 32 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 12 mm Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer