The AB-10 is a powerful, versatile fan made of robust plastic. The radial flywheel pushes the laterally drawn air forward with a lot of pressure. An optional hose distribution attachment can be mounted on the air outlet side.ApplicationsThe fans are versatile and can be used in various ways, for example:• for commercial use on construction sites to accelerate the drying of construction materials• for drying water damage• for the removal of vapors• as carpet dryer3 different positionsThe fans can be positioned in three positions:horizontal - Air discharge straight forward: this position directs the air horizontally over the floor and drives moisture from carpets or also from underlays into the room air. This massively accelerates the drying of the substrate.45° inclined - Blowing out at an angle upwards: For example, when damp walls or suspended objects need to be dried.90° tilted - Blowing upwards: for drying ceilings or for more even air distribution in rooms, without stirring up dust.Characteristics• Maximum air volume of strong 4500 m³/h• Three fan speeds (1 = 520W, 2 = 550W, 3 = 620W)• Impact-resistant housing made of durable "Linear Rotational Plastic" (rotational plastic)• Powerful high-performance single-phase motor with starting and running capacitor (PSC motor)• Operation and airflow possible in three different positions (air angle positions 0°, 45°, 90°)• Easy to carry and transport thanks to compact design and convenient carrying handle• The device is immediately ready for use (no installation or assembly required)• No interruptions during power failure (device continues from where it was interrupted)• Stackable (multiple identical devices can be stacked on top of each other for operation and storage)   continuous operationThis blower is designed for high air circulation, even over extended periods. However, to avoid excessive wear, it should be turned off for 1-2 hours after 48 hours of continuous operation, allowing the motor to cool down completely.   Technical data Tension 230V ~ 50Hz Max. Power Consumption 880 W (3.9 A) Max. air circulation 4500 m3/h fan speeds 3 ( 3 = 620 W, 2 = 550 W, 1 = 520 W ) Max. speed 1300 U/min. Masse (H x B x T)  51 x 43 x 48 cm Weight 12.6 kg cessation of operations rotary switch Swiss plug Yes, 3m Cable guarantee 2 years

Learn more More Fewer

The industrial air purifier WDH-AF500B is a robust dust collector with a HEPA filter for industrial high-performance tasks as well as for cleaning the air on construction sites, in carpentries, or production halls with heavily polluted indoor air. It has a respectable air flow rate of approximately 850 m3/h, thus protecting employees from harmful dust, spores, asbestos, and other particles in the air.The ventilation strength can be adjusted continuously using a rotary control. Even at the highest setting, the operating noise is within a quite acceptable range, which also allows for normal communication. The housing is made of almost indestructible special plastic and has a carrying handle. An air hose can be connected during the process and/or in the after-run.The coarse dust filter cleans the air of larger particles in advance (purity rate 90%). Subsequently, the HEPA filter cleans the air almost completely with each pass (purity rate of over 99.9%).The delivery includes a HEPA filter (H13) as well as a coarse dust filter (G4)."Additionally, an optional activated carbon filter is available, which reduces odors and vapors."Properties of air purifiers: • Easy operation with stepless rotary control• Warning light for clogged filters, which reminds you to change them.• Housing made of robust special plastic, easy to clean• Possibility for hose connection in the intake area (suitable hose diameter 30 cm) as well as in the discharge area (suitable hose diameter 20 cm)• Low power consumption of 225 watts with a maximum air circulation of approximately 850 m3/h• No interruptions during power failure (device continues from where it was interrupted)• Carrying handle for easier transport• Stackable: up to four 4 devices can be stacked on top of each other.Properties Filter:•  HEPA Filter (H13) / included in the delivery: Purity rate of 99.95%. One of the best filters available, this brand filter captures and filters particles as small as 0.0003 mm. This includes pollen, germs, mold spores, and fine dust.•  Coarse dust filter (G4) / included in the delivery: The coarse dust filter (G4) removes all larger particles (> 10 ?m) with a purity rate of over 90%. When used as a pre-filter for the HEPA filter, it ensures a longer lifespan of the HEPA filter.• Activated carbon filter / not included in the delivery: Absorbs and cleans many types of smoke and odors and also helps to break down toxic vapors, gases, and solvents.Combination options filter:"One or both of these filters can be installed in the lid of the air purifier, or the space can be left free."• Coarse dust• Activated carbonIn the main part of the cleaner, either the HEPA filter can be installed, or the space can be left empty.The filters are consumables and cannot be cleaned. Depending on the level of air pollution, they must be replaced regularly.The device features a 7m long connection cable with a Swiss plug (220-240V / standard household socket).   warranty 2 years Shipping costs for 1 item: from Fr. 18.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataVoltage: 220 – 240V / 50HzMax. input: 225W (1.0 A)Air circulation: 850 m3/hNoise: min. 45 dB(A)max. 65 dB(A)diameterHose connections: Supply air 30 cmexhaust air 20 cmDimensions (H x W x D): 635 x 408 x 625 mmWeight: 17.5 kg

Learn more More Fewer

Ozone Generator WDH-AP001with 1000 mg/h (1 g/h) ozone outputThis small professional ozone generator is ideal for odor neutralization (e.g. smoke odor, decay odor, toilet odor, treatment of car interiors). It impresses with its good price-performance ratio and its ease of use.The ozone tubes represent the latest technology in ozone generation with a very long lifespan. The device itself is manufactured to be very robust.WDH is a quality product or brand that is almost exclusively available through specialized retailers. WDH air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc.  Characteristics • Ozone emission of 1000 mg/h (1 g/h) • Equipped with very durable ozone tubes• Continuous operation possible • Stainless steel frame with carrying handle• Low power consumption of only a maximum of 110 wattsImportant Safety Instructions The device may only be operated by qualified personnel who are well acquainted with the effects and application of ozone or have acquired this knowledge through training. Legal regulations must be observed during operation. Ozone is a toxic gas and oxidizing agent at higher concentrations (above 0.1 ppm or 0.2 mg ozone/m³) and is classified as dangerous and harmful to health! Precautions must be taken to prevent uncontrolled release of ozone. Ozone attacks natural rubber, latex, and plants and poses a risk to people and animals. We recommend using this device only for odor neutralization that is not due to harmful organisms.   Technical data  Tension 220V-240V / 50Hz Power consumption 110W max. (05.A) Ozone output (optimal) 1.000 mg/h (1 g/h) Max. Ozone Concentration  15-25 mg/l water resistance IPx0 Dimensions (H x W x D) 26 x 14.5 x 30 cm Weight 3.2 Kg Area of application 5°C - 40°C / max. 75 % r.H. Swiss plug Yes guarantee 2 years

Learn more More Fewer

5000 mg/h (5 g/h) ozone output This professional ozone generator is ideal for odor neutralization even of extremely strong odors (e.g. smoke odor, decay odor, toilet odor). The ozone tubes represent the latest technology in ozone generation with a long lifespan.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, CFC-free, of course with CE conformity, recyclable materials, etc.  Characteristics • Ozone emission of 5000 mg/h (5 g/h)• Equipped with very durable ozone tubes• Continuous operation possible• Timer function to select the automatic operating duration between 0 – 90 minutes• Stainless steel frame with carrying handle• Low power consumption of only a maximum of 130 watts• Clear control panel• Suitable for wall mounting Important Safety Instructions The device may only be operated by qualified personnel who are well acquainted with the effects and application of ozone or have acquired this knowledge through training. Legal regulations must be observed during operation. Ozone is a toxic gas and oxidizing agent at higher concentrations (above 0.1 ppm or 0.2 mg ozone/m³) and is classified as dangerous and harmful to health! Precautions must be taken to prevent uncontrolled release of ozone. Ozone attacks natural rubber, latex, and plants and poses a risk to people and animals. We recommend using this device only for odor neutralization that is not due to harmful organisms.You can also rent this device from us. Technical data   Tension 220V-240V / 50Hz Power consumption 130 W (0.6 A) Ozone output (optimal) 5000 mg/h (5 g/h) Max. Ozone Concentration 15-25 mg/l water resistance IPx0 Dimensions (H x W x D) 59 x 38 x 22 cm Weight 12.7 Kg Area of application 5°C - 40°C / max. 75 % r.H. Swiss plug Yes guarantee 2 years

Learn more More Fewer

High-quality, large basket fan made of robust metal and aluminum rotors. The fan head is adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a durable high-performance motor, and a rack with 2 wheels for easy mobility. It impresses with its good price-performance ratio and its simple handling.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Extra large fan head (Ø 60cm = 24") with up to 10500 m³/h recirculation• Three fan speed settings, easily adjustable via a rotary switch on the back• The fan's direction of airflow is horizontally adjustable without steps.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easily transportable with rack and 2 wheels• Long power cable, approx. 2.20m length, Swiss plug• RoHS and CE compliant  Technical data  Power consumption 120 Watts max. Rotordurchmesser 60 cm / 24 inches airflow Up to 10500m³/h speed levels Three Cable length approx. 2.20m Connection Swiss plug 230V 3-pole (standard household socket) Dimensions ( W x H x D )  80 x 71 x 38.5 cm operating noise 64 dB(A) at a distance of 2.5m Weight 6.5kg  

Learn more More Fewer

The H600A quickly cleans the air of fine dust, pollen, bacteria, and viruses with a high purity rate. The strong ventilation is a great advantage. The more frequently the room volume passes through the device, the purer it becomes. While particles such as fine dust, as well as viruses and bacteria, are practically filtered out of the room air by the HEPA H13 filter by almost 100% with each pass through the device, odors are gradually reduced until they are completely eliminated after several passes.Properties, Features & BenefitsprefilterThe pre-filter (filter mesh) removes all larger particles such as coarse dust, hair, and lint, and ensures a longer lifespan for the other filters.HEPA Filter (H13)One of the best filters overall, this brand filter of filter class "H13" captures and filters particles as small as 0.0003mm. This includes pollen, germs, mold spores, and dust with a purity rate of 99.97%.Pro Activated Carbon FilterAbsorbs and cleans many types of smoke and odors (e.g. cigarette smoke) and also helps to break down toxic vapors, gases, and solvents (e.g. formaldehyde, benzene, ammonia, sulfur, etc.).EPA & Activated Carbon Filter Combination (E11)A filter as a combination of the two aforementioned quality filters to achieve even better results. It is placed in front of the (more expensive) HEPA H13 and activated carbon filters in the device and significantly extends their lifespan.anion exchangersProduces approx. 3 million anions/ions per second, which proactively combat smoke, odors, bacteria, viruses, and other dirt particles in the room.Air Sensor Operation (Automatic Mode)Automatically measures the air quality. If the determined air quality is very good, the device automatically switches to the lowest operating strength. If the result is the opposite and the air quality is poor or bad, the operating strength automatically adjusts upwards.Auto TimerWith the timer, you can set/select a switch-on time and a remaining runtime of the device of up to 8 hours.Touch-PanelWith this modern control panel, you can make your settings quickly and precisely.5 speed levelsFive options for your very personal requirements.night operationDimming mode as well as very quiet operation.LED display:Modern and very clear LED display, so you always have a quick overview of all settings.Furthermore, the current air quality is displayed. Both the pollution values of odors/vapors (display VOC) and the airborne particles in various sizes can be queried (display PM). The smallest displayed unit is particles smaller than 1 micrometer per cubic meter of air (display = PM 1.0). Particle size steps: 1.0 / 2.5 / 10.0). PM2.5 is also referred to as fine dust (2.5 micrometers is one 400th of a millimeter). A 3-color display facilitates the quick recognition of the approximate air condition.Filter change indicatorThis will indicate to you when it is necessary to replace one or more filters.Stable housingVery robust and with a high-quality and appealing design.parental controlsSuitable to avoid unintentional adjustment of the settings.MiscellaneousThe device works with one (1) HEPA filter plus one (1) activated carbon filter plus one (1) filter combination. Depending on the area of use, the filters last up to one year.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have established an excellent reputation for high-quality air purifiers in recent years. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc.usage examplesHealthier Climate: Create a healthier environment and thus a more noticeable well-being.Odor elimination & tobacco smoke removal: Not only is the unpleasant smoke from cigarettes, pipes, cigars, etc. quickly absorbed and neutralized, but nicotine also has less chance to settle and turn from white to yellow.Fine dust and exhaust removal: Protects against many toxic substances in the air, to which you are particularly exposed in large cities and on highways.Asthmatics & Allergy Sufferers: Particle sizes AIRCENTER RemarkIt is therefore advisable to read the operating instructions before use in order to make the most of the various functions. After just a few minutes, everything will be clear and you will have a lot of enjoyment with the device.Regarding cleaning effectiveness against the Corona virusCoronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).HEPA filter of category H13 (as in this device) cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The H13 filter therefore captures the aerosols and cleans the air of COVID-19 viruses. The integrated ionizer is capable of significantly enriching the air with anions. Anions encapsulate viruses in the air and neutralize them. Therefore, the combination of H13 and ionizer means that the H600A can significantly reduce the concentration of viruses in the air. For risk reduction, for example, in waiting rooms, classrooms, offices, or in the hospitality industry, the device is very effective and recommended. Technical data Tension 220 - 240V / 50Hz Max. Power Consumption 145 W (0.7 A) air circulation Level 1: 90 m³/h Level 2: 225 m³/h Level 3: 380 m³/h Level 4: 475 m³/h Level 5: 540 m³/h  operating noise   Night mode: 40 dB(A) Level 1: 42 dB(A) Level 2: 53 dB(A) Level 3: 59 dB(A) Level 4: 63 dB(A) Level 5: 66 dB(A) Recommended room size  max. 70m² (resp. 170 m³) Masse (H/B/T) 850 x 450 x 420 mm Weight 22 kg guarantee 2 years

Learn more More Fewer

The TG105L is an exceptionally powerful axial fan with a high-quality motor. Ideal for large-scale air needs, such as in agriculture, tunnel construction, etc., but also for events and film sets. Given the high air volume, this wind machine is energy-efficient with a power consumption of 750W. The power fan is made of sturdy metal and maintains a good stand in the rack even when operating at full speed. The rack itself has two wheels on one side as well as two stand feet. For moving, the fan can be lifted and rolled away using practical handles. Due to the tubular housing, the axial fan not only disperses the air upwards and sideways but also has a considerable throw distance.The recirculation volume can be adjusted in two stages using the rotary control on the back.Characteristics:• Powerful axial fan with up to 13000 m3 of recirculated air per hour• Robust metal housing with rack, wheels, and handles• Durable high-performance motor, three-stage adjustable• Metal rotor blades• Drum inclination 180° rotatable• Splash water protected (IP24)• Retains the setting even during a power outage• Top price / performance ratio2 year guaranteeShipping costs for 1 pc.: from Fr. 45.- (Basic freight, all shipping options can be viewed in the shopping cart) Technical dataAir circulation: max. 13000 m3/hSpeed: max. 1039 rpmVoltage: 220 ~ 240V / 50HzPower consumption: max. 750 W (1.2 A)Protection class: IP24Diameter air duct: approx. 108 cmWeight: 50kgWeight: (H x W x D) 1290 x 1230 x 525 mmConnection cable: approx. 2m + CH plugoperating noiseLevel 1 / 1m distance 81 dB(A)Level 1 / 2.5m distance 78 dB(A) Level 2 / 1m distance 85 dB(A)Stage 2 / 2.5m distance 82 dB(A)

Learn more More Fewer

The TG60L is a very reliable industrial drum fan with a high air circulation volume and low power consumption. It is ideal for commercial use, for example in construction drying, for supporting water damage drying, but also suitable for agriculture.The power fan is made of sturdy metal and maintains a good stand in the rack even when operating at full speed. The rack itself has two wheels on one side as well as two stand feet. For moving, the fan can be lifted and rolled away using practical handles. Due to the tubular housing, the axial fan not only disperses the air upwards and sideways but also has a considerable throw distance.The recirculation volume can be adjusted in three stages using the rotary control on the back.Characteristics• Powerful axial fan with up to 5900 m3/h recirculation• Robust metal housing with rack, wheels, and handles• Durable high-performance motor, three-stage adjustable• Metal rotor blades• Drum inclination 180° rotatable• Splash water protected (IP24)• Retains the setting even during a power outage• Top price / performance ratioThis device will be shipped by courier in any case due to its dimensions (regardless of the shipping method selected at checkout)."If you need even more air pressure for the distance or want to draw in or exhaust air with a hose, also consider the model WM120." Technical data   air circulation speed max. max. 5900 m3/h 1345 U/min Tension 220 ~ 240V / 50Hz Max. Power Consumption 260 W (1.2 A) Protection class IP24 operating noise Level 1: 1 / 2.5m distance Level 3: 1 / 2.5m distance 76 / 73 dB(A) 80 / 77 dB(A) Diameter air duct  approx. 63 cm Weight  18.8 kg Masse (H x B x T)  765 x 765 x 300 mm connection cable  ca. 2m + CH-Stecker guarantee  2 years  

Learn more More Fewer

The WM120 is the "monster version" of the axial fan SHT28. It has a very powerful air flow of 9600m³ / h and is suitable wherever a large amount of supply or exhaust air is desired. For example, in agriculture for ventilating livestock barns, on construction sites, in industrial halls, etc. It is of course also suitable for parties or for ventilating festival tents, photo shoots, etc. Given the air performance, the consumption of only 750W is moderate; a normal 230V socket is sufficient for the operation of this wind machine."Optionally, the compressed air can be discharged with an air hose (available lengths of air hose: 10m and 20m)."This professional wind machine is very robustly built and designed for long durability. The frame and housing are made of metal. The device has solid, removable metal wheels with brakes to prevent recoil of the device due to the high air pressure. Durable high-performance motor.The airflow can be adjusted at an angle of 180° (from vertical to horizontal).Characteristics• high air circulation of strong pressure into the distance• Swiveling air flow angle of 180° (vertical to horizontal)• Very robust metal housing/metal frame.• Equipped with a powerful, durable high-performance engine.• Good mobility through high-quality running wheels and rack.• Child's play operation.• No adjustment during power failure (device continues from where it was interrupted).• The device is immediately ready for use (Only the wheels need to be screwed on. Upon pickup, we can gladly assemble it for you free of charge if desired).• Fulfillment of the WEEE standards.usage examplesVentilation:• Ideal for ventilating or exhausting large rooms• Removal of heat and vapors, e.g. in tunnel construction, during asphalt casting work, and on construction sites.• Agriculture: Ventilation of livestock barns• Industry: Wind cooling of machines and trades• Removal of dust and odorsWind generation and others:•  In the wind tunnel, when filling hot air balloons, or for use in film sets, stage effects, or photo shoots, these devices are ideally suited for this purpose.    Technical data   Tension 220 -240V / 50Hz Maximum power consumption 1980W Inrush Current (9A) Ø power consumption 750W operation (3.5 A) ventilation levels 1 air circulation volume max 9600 m³/h speed max 1420 U/min. Sound pressure level (our measurement) 1m distance 83 dB(A) 2.5m distance 79 dB(A) Ø Air duct 65cm Dimensions (H x W x D) 87 x 88 x 67 cm Weight 50 Kg operating conditions Temperature: -5° - +40°C Humidity: 0 - 90% r.H. cessation of operations 2 push buttons ON/OFF Protection class IPX0 Electrical protection class I Swiss plug Yes guarantee 2 years

Learn more More Fewer

A compact dehumidifier with adsorption technology. Adsorption is useful where the room air is cold, or where very low humidity levels are to be achieved. The "DS3" is also ideal for quick laundry drying in cool basements..In contrast to condensation dehumidifiers (dehumidifiers with a compressor), dehumidifiers with adsorption technology have an almost constant dehumidification performance even at low temperatures. They require virtually no lead time from startup until effective dehumidification begins. Due to their compressor-free design, these dryers are lightweight at only 7.5 kg. Technologically, the device would even extract water from the air below freezing point; however, the water then freezes in the collection tray, making 0.5°C the limit for use. Even at warmer temperatures, drying with adsorption dryers is straightforward, but the power consumption per liter of water extracted in temperate rooms is higher than that of compressor dehumidifiers (condensation dehumidifiers). The crossover point is around 8-10°C, meaning that below this value, adsorption dryers are more efficient, while above it, condensation dryers are more effective.Once the target humidity is reached, the dehumidification operation stops, while the ventilation continues for a few more minutes until the device has cooled down sufficiently. Subsequently, dehumidification and ventilation pause until the humidity in the room rises above the desired target humidity level again. The ventilation is powerful and can be adjusted in 3 stages. This is particularly advantageous when drying laundry and significantly speeds up the process. With the vertically adjustable air outlet louver, the dry air can also be directed in the desired direction. The wind noise is audible even at the lowest setting, so the DS3 is only partially suitable for very quiet bedrooms.Special function air purification with HEPA filterThe DS3 can also be used as an air purifier. A suitable HEPA filter available from us can be placed in the air intake area. This filters the air with a purity rate of over 99.9% and removes all airborne particles such as pollen, fine dust, spores, viruses, and germs from the air. The air purification mode can run together with the dehumidification operation, but also without dehumidification thanks to the pure air circulation level. The filter can be ordered individually.  Characteristics of the DS3• Dehumidification capacity of up to 9.5 liters per day.• Adsorption technology without a compressor and without refrigerants.• already at cool 0.5°C a good dehumidification performance.• significantly larger water bucket (5 liters) than comparable devices, auto-stop when full tank including warning light.• Electric hygrostat (LED) for regulating and setting the desired humidity.• Humidity control in 10% steps from approx. 40% to 70% as well as continuous operation possible.• In addition to the standard mode, there are the following operating modes: Auto mode; Dry mode (Turbo) and Air purification mode* (additional *HEPA filter required).• Timer function to select the automatic remaining time or the start time between 1-24 hours.• Clear display including current humidity display and status overview.• Also suitable for continuous operation/continuous dehumidification.• SmartHome capable (via WLAN socket) + can be controlled via external timer switch (only possible with a few devices).• Memory function: no adjustments during power failure (device continues from where it was interrupted).• Possibility for direct hose connection for draining water into a lower outlet (suitable hose: 12mm inner diameter).• Absolutely maintenance-free.• Washable, antibacterial air filter.• Modern design and appealing appearance, therefore also very suitable for living spaces.• The device is immediately ready for use (no installation or assembly required).• Comparatively light in weight, easy mobility with side grip recesses.• Fulfillment of the WEEE standards.• TÜV "GS" tested as well as CE and EMC conformity.   scope of deliveryThe delivery includes the ready-to-plug-in device as well as an activated carbon net, which can be placed in the air intake area and slightly improves the air quality during operation. The HEPA filter is optional and is not included in the basic delivery.  application examples   • Drying of poorly insulated basements, garages, boats, caravans during the winter season • Laundry drying in cold laundry rooms • Drying of herbs and spices       Technical data   Tension 230V / 50Hz Power consumption max. 730W Sound pressure level (our measurement) Weakest fan stage: 1m distance 48 dB(A) 2.5m distance 44 dB(A) Strongest fan speed: 1m distance 55 dB(A) / ideal for laundry drying 2.5m distance 52 dB(A) fan         Weakest fan stage air volume approx. 170 m³/h Blow-out speed approx. 4.4 m/s. Strongest fan stage air volume approx. 270 m³/h Blow-out speed approx. 6.5 m/s. dehumidification performance   max. 9.5 liters per day (at 30°C / 80% r.H.) max. 9 liters per day at 8°C / 80% r.H.) condensate tank Approx. 5 liters and direct hose connection (12mm) refrigerant not available/adsorption technology Dimensions (H/W/D)   515 x 360 x 240 cm   Weight 7.5 Kg Ambient temperature 1°C ~ 32°C  Comparable devices EcoQ 9L Steady Area of application bus ca. 50 m² Swiss plug Yes   guarantee 2 years Documents/Downloads   User Manual German

Learn more More Fewer

This high-quality, accurate hygrometer with thermometer 122.01HT is an advancement of the Fischer hair hygrometer 111.01 – the test winner at Stiftung Warentest. It is manufactured by the company Fischer, and this blue/black version is also suitable for placement in living areas, offices, basements, and hobby rooms. Not suitable for outdoor use.The synthetic hair hygrometer is ideally suited for accurately checking the moisture level in your rooms. You can also reliably track the progress during the operation of a dehumidifier or construction dryer. Furthermore, the moisture display provides a recommendation when short ventilation becomes advisable.This model features a separate temperature display in addition to the humidity indicator.The hygrometer is suitable for hanging or standing.The mechanical Fischer living space hygrometer is "Made in Germany". The current Dryfix/Aerial version is designed in elegant blue/white/black tones, and the frame is made of chrome steel. The stand is made of black lacquered wood.scope of delivery• Cardboard box with calibrated hygrometer• Wooden base• Description including interesting background information   Technical data  Dimensions (H/W/D) Ø 10 x 1.8 cm Weight 98 g. (without stand base) / 130 g. (with stand base) Measuring range 10% - 100% r. humidity Measurement accuracy +/- 5% Mass time Constant guarantee 2 years

Learn more More Fewer

Exclusively with us!The X-Tank Basic is an additional bucket for wall-mounted dryers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow. The X-Tank Basic can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the flat rack with scale, including power cable and matching 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.The X-Tank was developed by us (Patent CH709716) and is exclusively available from us.    scope of delivery plug-and-play device including matching 20-liter bucket   Technical data Mass HxWxD: 180 x 480 x 390 mm (Dimensions without bucket) Weight: 7 kg Material: Metal white powder-coated connection cable: 2m with 3-pole Swiss plug (fits into standard household socket) Guarantee: 2 years

Learn more More Fewer