Wall bracket for air conditioner - suitable for Argo Ulisse 13 DCI ECO air conditioning unit  Technical data: Brand: Argo Net weight (kg): 4.5 Warranty: 24 months Color: Black

Learn more More Fewer

Very high-quality, perforated spiral hose for distributing warm air in the room, for example for heating marquee tents or construction sites.The hose is 12m long and has a diameter of 30.5cm, with a zipper at both ends that allows the hose to be easily extended. On the underside, there are air outlet holes (diameter 4cm) so that the warm air is regularly distributed in the room.Metal eyelets on the top side allow the hose to be attached to the ceiling or wall. One end of the hose can be closed with a matching closure cap via a zipper (cap included in the delivery)."From our range, for example, can be combined with the heater Master B18EPR with the hose. To fix the hose to the heater, it is best to use a Briede (clamp)." Technical data  Length: 12 m Diameter: 30.5cm Operating temperature: -50°C to +150°C Weight: 4 kg depending on length Flexibility: Highly flexible, angles of 180° or even circles in a small space are not a problem. Color: black Material: Dura-Spiraflex PVC/Polyamide duct, reinforced with a continuous metal spiral, metal carrying loops every 2m (suitable for hanging the air distribution hose) Additional features: Compressible in a ratio of approximately 1 to 25 

Learn more More Fewer

Space-saving, extendable laundry hangers for wall mounting. This system offers surprisingly much space for drying smaller laundry items on 5 metal bars, each 1.20m wide. Ideal in spatially confined conditions or as a secondary hanging for occasional drying needs.Easy assembly: the system is fully assembled and only needs to be fixed to the wall with 4 screws / dowels (included in the delivery).Space requirement: extended max. 120 x 46 cm from the wall, retracted 120 x 10 cmLoad capacity approx. 12 kgMaterial: Metal rods, white powder-coatedShipping costs for 1 piece Fr. 18.- (this laundry rack is sent exclusively by courier due to the package dimensions). warranty 2 years Technical data   width 120 cmtotal height 17 cmDepth 10-46 cm from wall  

Learn more More Fewer

The clotheslines consist of a robust wire core with a white, UV-resistant plastic coating. Compared to commercially available nylon clotheslines, these wire core lines can be tensioned significantly tighter, so that even when loaded with a lot of laundry, they sag only slightly. Additionally, these lines warp very little over time.   The clotheslines are equipped on one side with a loop, which can be hooked onto the first sliding pulley of the clothesline system. The other side has no loop, so that the end can be guided into a rope tensioner from where tension can be applied over the entire length of the line from that point.    Characteristics• PVC coated steel wire strand• white, UV-stabilized• Nominal strength 1400 N/mm²• Lengths: 10 / 20 / 30 / 40 / 50 / 70 / 100 / 200m• Total diameter 4mm• Made in Switzerland

Learn more More Fewer

Complete laundry line system for self-assembly with sturdy T-telescopes made of stainless metal. Ideal as a secondary hanging solution or wherever a wall-to-wall solution is not possible due to space constraints. This system requires a stable, non-insulated supporting wall, ideally made of concrete or masonry. White plastic-coated wire rope and chrome-plated cable tensioner for optimal load capacity.1 m (8 lanes) with20 m rope - for a width of max. 2.36 m The set consists of- 2 x T-beams made of sturdy metal with a widened mounting plate for ideal stability, length 1 m. The first line is 10 cm away from the wall, then 12.5 cm distance.- 16 sliding rollers Dryfix, color selectable black, yellow, blue- 1 rope tensioner- plasticized wire rope white- 4 dowels and screws for wall mountingThe rollers are pre-assembled on the carrier rails in this package.Ideal mounting heightas main hangs approx. 1.85-1.95m (to avoid injuries, install above head height), or as wide secondary hangs also popular at hip height.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.  

Learn more More Fewer

Complete laundry line system for self-assembly with sturdy T-telescopes made of stainless metal. Ideal as a secondary hanging solution or wherever a wall-to-wall solution is not possible due to spatial reasons. This system requires a stable, non-insulated supporting wall, ideally made of concrete or masonry. The supports extend 60 cm into the room and have space for 5 lines.White plasticized wire rope and chrome-plated cable tensioner for optimal load capacity.The set consists of• 2 x T-beams made of sturdy metal, length 60 m. The first line is 14.2 cm away from the wall, then 10 cm distance.• 10 sliding rollers Dryfix, color selectable black, yellow, blue• 1 rope tensioner• plasticized wire rope white 10m• Dowels and screws for wall mountingThe rollers are pre-assembled on the carrier rails in this package.Ideal mounting heightAs a junior line (additional hang) at a comfortable working height (approx. 1m), or as a main hang at approx. 1.85m height.

Learn more More Fewer

Complete wall-to-wall laundry line system made of stainless aluminum rails for self-assembly. Affordable, stable design with Dryfix corner rails and pre-assembled sliding rollers. The screws/anchors required for assembly can be ordered free of charge. White plastic-coated wire rope and chrome cable tensioner for optimal load capacity.0.95 m wide (7 lanes) with20 m rope (line length max. 2.70 m)30 m rope (line length max. 4.10 m)40 m rope (line length max. 5.50 m)50 m rope (line length max. 7.00 m)1.15 m wide (8 lanes) with20 m rope (line length max. 2.30 m)30 m rope (line length max. 3.60 m)40 m rope (line length max. 4.85 m)50 m rope (line length max. 6.10 m)Complete wall-to-wall clothesline system for self-assembly.The set consists of:- 2 x support rails made of sturdy aluminum, perforated for wall mounting- Dryfix sliding rollers black (15 cm distance between the lines)- 1 rope tensioner- plasticized wire rope white- Order for free upon request: Dowels and screws for wall mountingTo calculate the correct rope length, you calculate (Room length x number of lanes) + (1 x rail width) + approx. 10 cm for the insertion of the rope end into the rope tensioner.The rollers are pre-assembled on the carrier rails in this package."Laundry line systems from 1m in length will be shipped by courier in any case."  Technical DataWeight Dryfix Alu complete 1.45m widewith 30m rope 2990 gr.with 40m rope 3259 gr.with 50m rope 3500 gr.  

Learn more More Fewer

Dryfix Vario Metal Laundry Line System, 15 cm Line SpacingComplete wall-to-wall laundry line system for self-assembly, can be combined with wall or ceiling brackets and expanded into a wall-to-ceiling or ceiling-to-ceiling system. Pre-assembled sliding rollers. The screws/anchors required for installation can be ordered free of charge upon request. White plastic-coated wire rope and chrome-plated cable tensioner for optimal load capacity.0.78 m wide (6 lanes) with 20 m rope (line length max. 3.20 m)30 m rope (line length max. 4.80 m)40 m rope (line length max. 6.50 m)50 m rope (line length max. 8.20 m)1.08 m wide (8 lanes) with 20 m rope (line length max. 2.35 m)30 m rope (line length max. 3.60 m)40 m rope (line length max. 4.85 m)50 m rope (line length max. 6.10 m)1.23 m wide (9 lanes) with20 m rope (line length max. 2.05 m)30 m rope (line length max. 3.15 m)40 m rope (line length max. 4.25 m)50 m rope (line length max. 5.35 m)  1.53 m wide (11 lanes) with 30 m rope (line length max. 2.55 m)40 m rope (line length max. 3.45 m)50 m rope (line length max. 4.35 m)70 m rope (line length max. 6.20 m)1.83 m wide (13 lanes) with 30 m rope (line length max. 2.15 m)40 m rope (line length max. 2.90 m)50 m rope (line length max. 3.65 m)70 m rope (line length max. 5.20 m)2.28 m wide (16 lanes) with30 m rope (line length max. 1.70 m)40 m rope (line length max. 2.35 m)50 m rope (line length max. 2.95 m)70 m rope (line length max. 4.20 m) "Can be combined with all wall or ceiling supports from Dryfix, Krüger, Lübra. For rail lengths up to 1.53m, two supports per side are sufficient; above that, we recommend 3 supports per side due to the strong cable tension." The set consists of:- 2 x connection rails made of sturdy metal (4mm thick), perforated for wall mounting- Dryfix sliding rollers (15 cm distance between the lines), color selectable: black, yellow, blue- 1 rope tensioner- plasticized wire rope white- on request: free dowels and screws for wall mountingTo calculate the correct rope length, you calculate(Room length x number of lanes) + (1 x rail width) + approx. 10 cm for the insertion of the rope end into the rope tensioner.The rollers are pre-assembled on the carrier rails in this package.Option Montage: If you would like to have the system professionally installed at your location, please request a quote (depending on distance and possibly other items to be installed).Shipping costs for 1 set Fr. 14.- (we only ship this laundry rack via courier due to the package dimensions). Technical data Dryfix Vario Metal complete  0.78m with 20m rope: 6793g with 30m rope: 7013g with 40m rope: 7282gwith 50m rope: 7523g 1.08m with 20m rope: 8019gwith 30m rope: 8239g with 40m rope: 8508g with 50m rope: 8749g with 70m rope: 9257g 1.53m with 30m rope: 11579g with 40m rope: 11848g with 50m rope: 12089gwith 70m rope: 12597g 2.28m with 30m rope: 14093g with 40m rope: 14362g with 50m rope: 14603g with 70m rope: 15111g

Learn more More Fewer

The Heater 200LS is an affordable yet high-quality infrared-based heating solution. It can be mounted on the ceiling using the included chain, similar to a lampshade, and thus provides warmth from above. It is ideal for creating a cozy table setting on the balcony, as well as for providing targeted heating in workplaces such as basements, workshops, or production halls.The 200LS has a protection class of IP24. This means that it is protected against splashing water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, which means at a normal room height of about 2.5m, it covers a radius of about 2-3 meters.Heater:The heater has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating power can thus be adjusted at the device itself with the push of a button, but also via the included remote control to either 1000W or 2000W. The heating tubes emit not only heat during operation but also a bright light, which sufficiently illuminates the warmed area.LED light:Additionally, the 200LS is equipped with an LED lamp that can be turned on independently of the heating operation. It emits a subtle white light downwards. The brightness of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when heating is not in operation.The device is almost entirely made of metal and impresses with its very robust workmanship.Properties & Advantages over other heaters:• Equipped with two individual heating tubes• IP24 - suitable for indoor and outdoor use• Heating power selectable 1000 watts or 2000 watts• Integrated, separately switchable LED lamp as a light source even without heating operation• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning the LED light on/off.• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataVoltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 WHeating levels: 2 (1000 W / 2000 W)Dimensions (H/W/D): 265 x 430 x 430 mmProtection class: IP24 (protected against foreign bodies >12.5 mm and against splashing water)Weight: 3.5 kg

Learn more More Fewer

The heater 210S is a powerful infrared heater in a stylish industrial look. It can be attached to the ceiling using the included chain, similar to a lampshade, and thus warms from above. It is ideal for creating a cozy table setting on the balcony, but also for providing targeted heating in workplaces such as basements, workshops, or production halls.The heater has protection class IP54 - which means protection against splashing water - and is therefore also suitable for outdoor use.The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, meaning at a normal room height of about 2.5m, it covers a radius of approximately 2-3 meters. Heater:The 210S is equipped with two powerful carbon heating tubes, which have a significantly lower glare effect than conventional heating tubes. The heating power can be selected in three levels: 900W / 1200W / 2100W. The heating strength can be adjusted by pressing a button on the device itself, as well as via the included remote control.The device is almost entirely made of metal and impresses with its very robust workmanship.Features & Advantages over Other Heaters:• Equipped with two individual heating tubes• IP54 - suitable for indoor and outdoor use• Three heating levels 900 / 1200 / 2100 W (fits standard household socket)• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning on/off• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2100 WHeating levels: 3 (900 W / 1200 W / 2000 W)Heating tubes: 2 carbon heating tubesHousing: Metal, light gray paintedDimensions (H/W/D): 310 x 475 x 475 mmProtection class: IP54 (protected against dust in harmful amounts and against splashing water)Weight: 3.5 kg

Learn more More Fewer

This powerful heater (1200-2400 W) is ideally suited for quickly warming limited areas. It is therefore perfect for seating areas, workspaces, patios, conservatories, and also for rapid construction drying. The delivery includes both the large tripod and a wall mount.The 240GT is technically state-of-the-art. It has been developed from the proven know-how of earlier models and enhanced with the latest technology. The "golden tubes" (Golden Tubes) have a seconds-fast warm-up phase and a good deep heat effect. The Golden Tubes also dim after a few seconds, which significantly lessens the impact of ambient light compared to conventional infrared heaters.Complete delivery scope for free-standing installation and wall mounting:The tripod consists of a solid metal base and a 3-part screwed tube, allowing the desired height to be selected between approximately 0.60m, 1.25m, and 1.94m. Additionally, the tilt angle of the spotlight head is adjustable, so that the heat can be optimally directed to the desired area. Wall mounting is also possible. The corresponding bracket is included in the delivery.Easy to use:The heater can be controlled both at the heating head itself and via the included remote control. By pressing a button or using the remote control (included in the package), the desired heating power of 1000/2000W is selected.Properties of this infrared heater:? Two "Golden Tube Heating Tubes" that are currently among the highest quality and most powerful on the market.? Selectable heating power of 1200W or 2400W (each tube has a heating power of 1200W, so one or both tubes can be activated)? High-quality and robust stand base made of stainless steel? Swiveling heating head for precise alignment with the area to be heated? Remote control or direct operation at the heating head itself? Silent heat transfer without air movement, the heating beam is insensitive to wind and weather.? Protection class IP55, also protected against dust in harmful quantities and against water jets from any angle.? Fulfillment of the WEEE standards? "GS" tested and compliant with CE and EMC regulationsImportant:? The spotlight is suitable for wall and floor mounting. However, it must not be mounted on the ceiling.? Plug: the device is equipped with a T23 plug and requires a minimum of 13 Amperes. The suitable socket has square poles (not round). These sockets are usually available in laundry rooms, in new buildings, and construction temporary facilities. Therefore, the plug does not fit into conventional household sockets with 10A. Please check in any case before purchasing whether you have a corresponding socket available. Also, refer to the photo in our image gallery where the plug is depicted.? Protection class IP55: The heater head itself is protected to IP55, which means it is protected against water jets. Therefore, outdoor use is possible. The plug itself must be protected from moisture. The included connection cable is approximately 1.5m long.? Lifespan: The heating tubes have an expected lifespan of up to 5000 operating hours, which corresponds to 5-10 years depending on usage frequency. Due to the high protection against spray water, the internal components are very well sealed. Replacing defective tubes is theoretically possible, but very labor-intensive. Additionally, the water protection is lost during a replacement. Therefore, if the heater has reached the end of its lifespan, it is advisable to replace the entire head.Scope of delivery:? Radiant heater? Tripod? Wall mount? Remote control (2 x AAA batteries not included)Heating lamp usage examples:Heating of: terraces, seating areas, balconies, festival tents, workplaces, construction sites, workshops, agriculture, garages, storage rooms, basements, sheds, gardens and for use in professional and hobby activities, etc.   2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart)(akd) Technical dataVoltage: 220V-240V / 50HzPower consumption: max. 2400 WMinimum protection: 13 AProtection class heating head: IP55Dimensions of heating head (H/W/D): 25 x 70 x 23 cmDimensions with tripod (H/W/D): max. 230 cm x 70 cm x 46 cmWeight: 15 kg (complete including stand), 3.7 kg (only heating head)Operation setting: Remote control or directly on the deviceApplication area: up to max. 20m2 indoor area or approx. 10m2 outdoor areaSwiss plug: Yes / T23Guarantee: 2 years

Learn more More Fewer

Powerful air dehumidifier / construction dryer with metal housing. For effective drying of larger rooms and water damage. Characteristics• Dehumidification capacity of up to 50 liters / day• Electric hygrostat (LED) for regulating and setting the desired humidity• Function for continuous operation/continuous dehumidification• Power consumption meter (kWh)• Operating hour meter• Automatic memory function, saves the settings for automatic operation continuation after a power failure.• Clear display including current humidity, target humidity, and status overview• Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market.• Automatic professional defrost function• Humidity control in seamless 1% steps between 30% and 90% (plus continuous operation function)• Removable condensate tank• Connection possibility of a hose for continuous drainage of the condensate• Powder-coated metal housing/metal frame• Very easy mobility due to transport handles and large running wheels for safe travel over steps and uneven ground.• Operating warning light / Defrost light• No separate or additional coolant is required (closed circuit)• Washable air filter grid• Environmentally friendly refrigerant R290• CFC free and compliance with WEEE standardsHints"Not suitable for use in very cold rooms, as the cooling element can freeze during continuous operation below 8°C. Unlike similar models on the market, the ventilation also stops when the desired target humidity is reached, which means lower power consumption at the same performance."dehumidification performanceOverview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30 °C / 80% r.H. = approx. 50 L (60 % r.H. = approx. 25 L)20 °C / 80% r.H. = approx. 25 L (60 % r.H. = approx. 14 L)15 °C / 80% r.H. = approx. 18 L (60 % r.H. = approx. 10 L)10 °C / 80% r.H. = approx. 10 L (60 % r.H. = approx. 7 L)(r.H.=relative humidity)(akd)  Tension 220-240 V / 50 Hz Power consumption max. 820 (3.7 A) / 700 W (3.2 A) at 20 °C / 60 % r.H. Sound pressure level 57 dB(A) (Manufacturer's specification) dehumidification performance 50 liters/day (30 °C / 80 % r.H.)  amount of recirculated air 350 m³/h (installed) condensate tank approx. 5.5 liters (direct hose connection possible) Compressor    Rotary compressor  refrigerant  R290 (230gr.) Dimensions (H x W x D)     925 x 605 x 462 mm Weight 31 Kg cessation of operations Digital Ambient temperature 8 °C ~ 32 °C Area of application min. 11 m² to max. 120 m² Swiss plug Yes   hose connection Yes guarantee 2 years

Learn more More Fewer