"Straps for securely securing elements of the AERCUBE drying system. Length 1.12m." Shipping costs for 1 item: Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical datalength 1120mm 

Learn more More Fewer

"With these fittings, the air hoses are fixed in drill holes of floor slabs during the drying of water damage." • PVC, yellow• for 50 to 52 mm core hole drilling• suitable for air hoses with a 38mm inner diameter 1 piece = 10 pack Trotec Article No. 6.100.009.044

Learn more More Fewer

By using the Dryfix drying granules "Home" or "Pro", a gel is created that can be easily and quickly re-liquefied with this powder. Sprinkle it over the formed gel after completing the work. After approximately 5 minutes, it transforms back into water.  Advantages • No disposal of the gel necessary• Saves time• Simple application• Safe for the environment   Application example after flat roof renovation or application in the interior or household   1. Sweep the gel formed by the application of Dryfix granulate and fill it into a kettle. 2. Sprinkle some "Flu" granulate onto the gel and stir. 3. Reapply as needed 4. Pour away water            Application example for pipes, lines, or toilets   1. Sprinkle some "Flu" granulate directly onto the gel formed by the application of Dryfix granulate and stir. 2. Rinse with water        Important in flat roof renovation The "Flu" should not be applied in strong sunlight, as the heat generated can damage the top bitumen layer. This is especially true if the powder remains for an extended period. In this case, we recommend not to liquefy the drying granulate directly on the roof, but to collect it in a bucket and liquefy it there. Alternatively, the drying granulate can also be disposed of in a waste bag.  

Learn more More Fewer

The use of a filter mat significantly increases the reliability and lifespan of the water separator WA4i. The mat is simply placed at the bottom of the separator and provides additional protection for the pump against dirt particles.  Scope of delivery: 5 pieces Trotec Article No. 7.160.000.205

Learn more More Fewer

DRYFIX absorbs water up to 200 times its own volume within minutes and transforms it into a solid gel. This allows work areas to be quickly and efficiently dried out, creating a dam that keeps incoming water at bay. Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc.    Simple application The powder is sprinkled in a circle or boundary around the work area directly into the standing water. The water in the work area is completely absorbed, and a dam of gel is formed. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."    Application examples in the household "Binds spilled liquids such as knocked-over drinks, animal urine, and much more."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc.   Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).    Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

PureMarin – Natürliches, biologisch abbaubares Färbemittel für vielseitige Anwendungen in der Umwelt- und Wassertechnik PureMarin ist ein zu 100 % biologisch abbaubares Färbemittel, das ganz ohne technische Hilfsmittel visuell deutlich sichtbar ist. Es eignet sich hervorragend zur Verlaufs- und Anschlusskontrolle bei der Überprüfung von undichten Verbindungen oder fehlerhaften Ableitungen in Entwässerungssystemen. Dank seiner hohen Ergiebigkeit lässt sich der Farbstoff flexibel dosieren – je nach gewünschter Farbintensität kann PureMarin problemlos in Wasser gelöst werden. Die umweltfreundliche Pulverformulierung ist frei von Dosiergrenzen, da sie keinerlei Risiko für Umwelt, Mensch oder Tier darstellt. Vielfältige Einsatzmöglichkeiten: Leckage- und Verlaufsprüfung in Abwasser- und Drainagesystemen Tracerhydrologie zur Visualisierung von Fliesswegen und Strömungsverhalten Durchflusskontrollen in Fischtreppen, Wasserläufen, Talsperren oder Kläranlagen Gefahrstoffsimulationen bei Feuerwehrübungen und GSG-Szenarien Umweltfreundliche Markierung in wissenschaftlichen Untersuchungen Vorteile auf einen Blick: 100 % natürliche Inhaltsstoffe – in Lebensmittelqualität Vegan, hypoallergen, koscher & halal Absolut umweltverträglich und biologisch abbaubar Sicher für Mensch, Tier und Gewässer Keine Auswirkungen auf die Wasserqualität Frei dosierbar – keine Höchstmengen Pulverform – leicht löslich in Wasser Dosierungsempfehlung:Abhängig von der gewünschten Farbintensität reichen bereits 2 g Pulver für 1–5 Liter Wasser. Mit einer Dose lassen sich so 100 bis 500 Liter Farblösung herstellen – ideal für kleine Tests bis hin zu grossflächigen Anwendungen.

Learn more More Fewer

This color powder is visually recognizable without technical aids and is ideally suited for direct gradient or connection control in the detection of faulty or leaky connections and incorrect discharges from drainage systems. The productive marking dye can be mixed in water as a color solution in any desired color intensity, as the pure powder mixtures are completely free from dosage limits due to their extreme environmental compatibility. Further applications lie in tracer hydrology, for example for flow path verification, for visualizing the mixing and flow behavior in flowing waters, lakes, reservoirs, or water treatment plants, as well as for monitoring flow rates and flow velocities in fish ladders. "The Pure dye is also an ideal tool for simulated hazardous material visualizations during GSG exercises of the fire department.""Individually adjustable for every need" "Due to their 100% natural food-grade ingredients, the colorants of the Pure series can be dosed as desired - an overdose is not possible.""Depending on the desired intensity, 2 g of pure dye can be added per 1 to 5 liters of water, thus producing a pure dose of between 100 and 500 liters of color solution."  Advantages at a Glance • 100% natural, food grade• hypoallergenic, vegan, kosher and halal• 100% biodegradable• Safe for humans and animals• No impairment of water quality• No maximum dosage limits• Water-soluble powder - easy handling  composition Radish, apple, black currant, citric acid, and maltodextrin  Technical data  Masse (L x B x H) 70 x 70 x 165 mm Contents 200 g ingredients Radish, apple and black currant, citric acid and maltodextrin scope of delivery 1 Dose Trotec article no. 3.510.012.051

Learn more More Fewer

Pre-filter (white casing ring)This pre-filter G4 is compatible with the Aercube Hepafilter system HF2 and cleans the air of coarse dirt with every pass through the device. The pre-filter is part of the consumables and can be washed and reused a few times depending on the type of contamination.Important: 2 versions round - squareThe round pre-filter available for order here is compatible with the HF2 systems of the new generation from the year of manufacture 2017 onwards. The round filters described here do not fit into the older devices (square filters).

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages  "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually recognizable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.   questions and answersAre the leak detection dyes also suitable for murky water? Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

This end fitting made of aluminum is designed for drilling in flat roof membranes. It is equipped with a slot notch for optimal fastening. Suitable for connecting 38mm hose. Trotec Article No.: 6.100.009.053

Learn more More Fewer

This air hose is compatible, among other things, with the adapter for the construction dryer TTK171Eco. Due to its lightweight, it is easy to handle and transport. With a high bending radius of 1 x diameter, it is extremely flexible and versatile. Its specially coated PVC jacket is abrasion-resistant and difficult to ignite.  Technical data • Temperature -5 °C to +80 °C• Standard length 6 m• Bending radius 1 x diameter• Inner diameter 160 mm• PVC-coated polyamide fabric• vibration-resistant and difficult to ignite• Reinforcement by concealed spring steel spiral• wavy inside and outside• hochflexibel• Color gray

Learn more More Fewer

This stainless steel nozzle was developed by experienced fluid mechanics engineers and features an optimal flow geometry.   The width or nature of the joint gap does not matter, as it is not part of the sealing system. Even wider joints result in a good efficiency, as the sealing system is designed to be flexibly used up to a joint width of 35 mm. The elastic rubber seals have a very good recovery value and adapt optimally to unevenness of the floor and the wall.    Furthermore, the nozzle features specially beveled clamping tabs that do not compact mortar residues when inserting into the joint, but rather displace them sideways. The rounding results in low resistance when inserting the nozzle.     Technical data   connecting piece 1 x 38 mm Extension to 50 mm possible with optional rubber adapter Dimensions W x H x D 400 x 130 x 40 mm width of the airflow 300 mm Weight 700g Material stainless steel Trotec article no. 6.100.009.010 guarantee 2 years

Learn more More Fewer

Trotec Article No. 6.100.009.054

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be introduced through the edge strip or other joints after removing the bases. Comparable to the flat electrode pair M 6-Bi 200. • Isolated shaft to exclude surface moisture.• The electrode length is 200 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.  

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be inserted through the edge strip or other joints after the bases are removed. Comparable to the flat electrode pair M 6-Bi 300. • Isolated shaft to exclude surface moisture.• The electrode length is 300 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

With this joint cross method, insulation layer areas under grouted wall and floor coverings can be dried without having to destroy the panels. Optimal for value preservation or for coverings that are no longer available, such as tiles or other grouted hard coverings. Unlike conventional distributors of this type, which have a hose connection at the head side, this system features a longitudinal hose connection for 38 or 50mm hoses. This leads to very favorable, low-turbulence pressure and flow conditions. Additionally, it offers the advantage that the system can be expanded arbitrarily for larger areas. Multiple systems can be connected using the optionally available coupling.scope of delivery • Aluminium distributor• 10 air hoses• 10 ground spikes   Technical data  air connections 1 air outlets 10 Masse (B x H x T) 250 x 38 x 100 mm Weight 660 g Trotec article no. 6.100.009.020 guarantee  2 years

Learn more More Fewer

Reinforced and very flexible air transport hose with a variety of applications, for example in heating, ventilation, or in air conditioning technology. We recommend using the SP series air transport hoses in combination with the corresponding Trotec connecting fittings. application examples • Ventilation and exhaust in air conditioning and ventilation technology• Drying, remediation of water damage• Winter building heating, stable ventilation, hall and tent heating• Trade fair construction and events• Grain drying• Bulk loading• Tank venting and degassing• Silo emptying• Air showers at car wash facilities.• etc.  Technical data • Temperature range: -20 °C to +80 °C• Temporarily also loadable with hot air up to 100 °C• Particularly robust design made of reinforced, PVC-coated polyamide fabric• Bend-proof and tensile strength• Double-sided spiral-free couplings• With abrasion protection and integrated steel spiral underneath• Bending radius 0.5 x Ø• Standard length 7.6 m Trotec Article No. 6.100.001.214

Learn more More Fewer

With this connecting plate made of powder-coated metal, the ASE adsorption dryers can be mounted on the AERCUBE drying towers.Suitable for ASE200 and ASE300 models

Learn more More Fewer

This special fog fluid has been developed for optimal use with the leak detection machine Trotec FS200 and enables the effective visibility of leaks. According to EU criteria, this liquid is not classified as environmentally hazardous and does not pose a specific danger to humans. Furthermore, it is biologically well degradable. Please read the printed safety instructions carefully before use.   Data   Shape / Viscosity Liquid / thin liquid Color clear Odor neutral Melting point not known boiling point ab 100 °C Flash point not applicable Ignition temperature not applicable self-ignition  no Brand-enhancing properties  no Danger of explosion no density 1.08 - 1.10 g/cm Solubility in water (20 °C) any PH value about 6.5 Trotec article no. 3.510.010.025    

Learn more More Fewer

This nozzle is designed to allow the entire air volume of the incoming or outgoing air to circulate under the door.  The nozzle is pushed under the door and connected to air hoses on both sides of the door. To ensure that the entire volume of air can be transported under the door, the passage inside the nozzle is expanded to the maximum width, allowing the air to circulate well despite the low flow height. A protective mat (protector) protects the floor underneath from scratches.  In this way, the complete drying installation can be flexibly relocated to rooms that have minimal noise disturbance for the affected party. Furthermore, the drying time is reduced if the room can remain closed. The nozzle is designed as standard for connecting hoses with a 38 mm inner diameter. For the use of 50 mm hoses, a separate adapter ring is available, which can be easily slipped over the nozzle to increase the diameter.  Technical data  connection nozzle I 2 on both sides suitable hose diameter 38 mm Masse (B x H x T) 400 x 74 x 157 mm Weight 1.7 kg Trotec article no. 6.100.000.160 guarantee 2 years

Learn more More Fewer

"The edge area of the floor can be dried gently and efficiently using the edge joint nozzle. This means that no drilling needs to be done in the floor, thus preserving the surface covering. Suitable for 38 mm hose systems." Technical dataSuitable for hose inner diameter: 38 mm 50mm

Learn more More Fewer