The active electrode B 50 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds. It detects the moisture distribution in ceilings, walls, concrete, and other set building materials.   The following measurement ranges are covered by the B 50• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via tableSuitable base devicesThe electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in dealing with moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a supplement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 31003750 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

The active electrode B 60 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds."It detects the moisture distribution in ceilings, walls, concrete, and other set building materials. The basic function is the same as that of the probe B50; additionally, the B60 features a built-in limit value setter from 20 – 140 digits and an acoustic signal generator."   The following measurement ranges are covered by the B 60• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via table Suitable base devices The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 31003760 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

Fast, precise moisture meter for detecting moisture in walls, ceilings, and floors. With this easy-to-use pocket-sized quick moisture indicator, you can quickly and reliably track your drying progress on construction sites or during the remediation of water damage.The electronic moisture indicator operates using a non-destructive measurement method based on the dielectric constant/high-frequency measurement principle. It has a spherical probe for detecting moisture and moisture distribution in solid building materials such as walls, ceilings, and floors (suitable for measuring wood only to a limited extent and as an indicator).Application"First, the desired material is selected on an LCD display and saved by pressing a button. Then, the metal ball is held at a right angle to the material to be measured, and the measurement button is pressed briefly. The result is immediately visible."   Handling of a ball measuring electrode  It is important to have a 90° angle to the measurement object as well as the correct positioning of the hydrometer/electrode. To avoid any influence from the hand of the person measuring, the electrode may only be covered by the hand on the rear half during the measurement and control process. The front half (display/sphere) of the device must remain free.       Proper handling of the device: Always hold the device firmly at the lower part of the housing during measurements:     Incorrect handling of the device: When measuring, the hand affects the measurement field of the ball electrode and thereby alters the measurement value.      Selectable Material Table• Display in digits• Cement screed in weight %• Anhydrite content in weight %• Concrete in % by weight• Cement mortar in weight %• Lime mortar in weight %• Mischputz in Gew %• Gypsum plaster in % by weight• Cement screed in CM %• Anhydrite screed in CM %• Gipsputz in CM %• Lime mortar in CM %• Cement mortar in CM %• Mixed plaster in CM %• Beton in CM % Weight %: The material moisture in weight percentages (also solid moisture) indicates the absolute proportion of free water contained in a solid in %. Values in the range of 0.2 - 0.3 % indicate dry materials.CM %: The displayed CM value simulates the extraction and measurement of a material sample in the manometer, where the sample is mixed with calcium carbide. This produces a gas, the pressure of which is measured. Depending on the material density, the value is very similar to weight %. For anhydrite, 1 weight % = about 1 CM%. For concrete floors, the CM value deviates more significantly: 1 weight % = about 1.5 CM%. Dry concrete floors/walls should have CM values below 2.0% (calcium sulfate or anhydrite screed: below 0.3%).Thus, the weight percentages are the more easily understandable value for non-specialists.Advantages and Features• Handy moisture meter in pocket format for quick individual and series measurements• For each building material, a limit value can be individually set, exceeding which an acoustic warning signal will sound.• Scan mode (1 - 199.9 digits) or direct display of moisture values in % by weight or CM-% for building materials, resolution: 0.1 %• Characteristic curves for 7 types of building materials• Min, Max, and Hold function for the measured values• Automatic calibration when the device is turned on• The device is delivered complete with a 9V battery and plastic box.Improvements compared to the previous Hydromette BL Compact BThe BL2 is the further development of its predecessor Gann Hydromette BL Compact B.• Longer measuring probe for more comfortable application• Significantly stronger high-frequency measurement field for greater penetration depth into the building material• Finer measurement resolution now from 0-199 digits for an even more precise delineation of moist areas, which was previously only possible with significantly more expensive measuring devices.• the direct display of the CM % has been expanded to include several building materials. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 30012032 Measuring range:   0 – 199.9 Digits (Scan Range) 0.3 – 6.0 wt.-% or 0.3 – 4.0 CM-% measuring depth: max. approx. 6 cm Advertisement: Device/ambient temperature Trend indicator: hardwood and softwood Max-Hold function: Yes Alarm function: Acoustically Calibration: Automatically Device shutdown: Automatically Single or series measurements: In seconds Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 190 x 50 x 30 mm Weight: 180 gr. Special features: No separate electrodes or cables required Ideal pre-testing device for all CM devices Guarantee: 2 years                      Further Gann measuring devices "We are an official sales outlet for Gann measuring devices in Switzerland and can offer you all Gann articles under advantageous conditions, for example: Gann Hydromette HB30, HT65, HT85 T, UNI1, UNI2, RTU600, CH17 and many more."

Learn more More Fewer

The UNI 2 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected, similar to the smaller model UNI1. Additionally, all construction moisture measuring electrodes that are based on the resistance measuring principle can be connected.The following measurement ranges can be determined.• building moisture• Humidity• Air temperature• Material temperature• Surface temperature'The UNI2 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'• B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.• MB 35 for surface moisture measurement on concrete• MH 34 for measuring high moisture values (40–200%) in softwood• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and• all Pt 100 temperature sensors.   "We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.Measuring ranges   building moisture: in resistance-based measurements: (*)0 - 80 Digits0.3 - 25 wt.% or 0.3 - 12 cm.%   in capacitive measurements: (*)0 - 199 Digits (Scan Area)0.3 - 8.5 wt.% or 0.3 - 6.5 CM-% with B 50, B 60 and LB 702 - 8 wt.-% with MB 35 on concrete surfaces   when measuring the relative humidity in the borehole: (*)5 - 98 % RH or0.2 - 3.7 wt.% with RH-T 37 EL and RH-T 37 EL flex   (wood moisture):40 - 200 % (atro) with MH 34 on softwood   Humidity: 5 - 98 % r.H. with RF-T 28, RH-T 37 EL and RH-T 37 EL flex   Temperature: -200 - +600 °C depending on Pt 100 temperature sensor   Infrared measurement range: -20 - +199.9 °C with IR 40 EL (*) = Moisture conversion in % depending on building material via conversion table   The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.Characteristics• Handy quick moisture meter for lightning-fast single and series measurements• Direct display of moisture values via the large LCD display, resolution: 0.1 digit• Quick measurement of moisture in set building materials using resistance and capacitive high-frequency measurement methods.• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology• Fully automatic device synchronizationscope of deliveryThe package includes the base station Uni2 without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 30001550 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V-Block battery (included in delivery) or Ni-Cd battery (special accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Learn more More Fewer

The RHT 37 BL 160 is an electrode for measuring air humidity and air temperature - specifically suitable for use in bulk materials and solids (e.g. masonry or screeds). Its areas of application include moisture analysis, damage assessment, monitoring of construction drying, as well as testing the readiness for installation of floor and wall coverings.The sensor tube has a diameter of 5.5 mm, which also allows measurements in joints without having to risk damaging wall or floor tiles. "In conjunction with a hydrometer, the air humidity in the borehole can be measured and the degree of saturation or moisture content of certain set building materials can be determined using sorption isotherms." "For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out."Suitable base devicesBL UNI 11CH17

Learn more More Fewer

Ozone in the ambient air poses a significant damage potential even at low concentrations. Therefore, compliance with safe ozone limit values is essential for the protection of human and animal health. This measuring device is the ideal instrument for the rapid and precise control or long-term monitoring of ozone concentrations in the ambient air. Ozone, a nearly colorless gas, is produced naturally or generated technically. It consists of an unstable compound of three oxygen atoms (O3), which relatively quickly decomposes back into oxygen (O2). In the O3 compound, it acts as a strong oxidizing and disinfecting agent. It kills germs, bacteria, viruses, and odors up to 3000 times more effectively than a chlorine treatment. Therefore, it is used in various areas for the disinfection of air and surfaces. However, before treated spaces are made accessible again for people and animals, it is crucial that the ozone level is within the permissible range. For this purpose, this measuring device is essential. The device is characterized by an extremely low cross-sensitivity to other gases or VOCs and delivers fast, highly precise measurement results even at minimal ozone concentrations. Numerous integrated functions, such as the ozone zero adjustment, the reference value measurement for short-term and time-weighted averages, as well as the switchable value display from ppm to µg/m³, make this responsive measuring device an indispensable tool for the accurate determination of ozone loads. Furthermore, it serves as an environmental measuring device that captures air temperature and humidity, as well as calculates dew point and wet bulb temperature. The dual display allows for the simultaneous display of two measurement values. "For long-term measurements, the device can be mounted on a tripod. It features a mini USB port and a 9V barrel jack, allowing for both battery operation and permanent mains operation. For mobile applications, a power bank can be connected to the mini USB port if needed."Advantages at a Glance • Fast and precise determination of even very low ozone concentrations• Ozone measurement display in ppm or µg/m³• Quick response time• Low cross-sensitivity to VOCs• Ozone null balance function• Ozone reference value measurement (STEL/TWA)• Atmospheric pressure offset for high-precision normal cubic meter measurements• Measurement of air temperature and humidity• Calculation of dew point and wet bulb temperature• Offset setting for air temperature and humidity• Data hold, min, max, and alarm function• Display lighting• ¼-inch thread for tripod mounting• Both battery and mains operation possible for continuous measurements.• Energy-saving automatic shut-off• Including calibration certificate     Diverse applications   • Workplace measurements in industry and commerce• Environmental analyses• Review of production environments• Limit value controls after the use of ozone generators for odor neutralization or disinfection, for example in the hospitality industry, drinking water treatment, as well as in fire and water damage restoration.     Scope of delivery   • Measuring device• Batteries• User manual• Calibration certificate• Carrying bag     Technical data Ozone (O3) measurement ppm min. 0, max. 1 ppm deviation Ozon (O3) µg/m³ min. 0, max. 1.996 (at 20°C and 1.013 hPa) deviation Temperature 0 to +50°C resolution 0.1 °C deviation ± 0.6 °C moisture0 to 99.9% RH resolution 0.1 % r.F. Deviation 0 % - 10 %Deviation 10.1 % - 70 %Deviation 70.1 % - 99.9 % 5%3%5% Battery (internal) 4 x AAA 1.5V (included in the package) Weight 185 g Masse (L x B x H) 290 x 110 x 80 Trotec article no. 3.510.006.110 Guarantee 2 years

Learn more More Fewer

The HB 30 is a versatile electronic device for measuring moisture in wood and building materials. It uses the resistance measurement principle to provide highly accurate results for various wood products, including sawn timber up to 180 mm thick, chipboard, and parquet, as well as for cured building materials. All common types of wood can be measured. For applications in the field of building moisture (e.g., in screeds, mortar, plaster, concrete, bricks, insulation materials), the HB 30 offers a dual approach: capacitive and resistance measurement methods. This allows for both non-destructive moisture detection and the creation of detailed moisture profiles at specific points of interest. Additionally, the HB 30 features an integrated infrared sensor for convenient surface temperature measurement. This makes it an extremely suitable tool for professionals such as parquet layers, interior designers, and carpenters. Special Features Handy moisture meter for fast single and series measurements with a high-quality measuring amplifier Direct display of wood moisture in % on the large LCD display, resolution: 0.1 % Wood Moisture Measurement: Characteristic curve groups 2 and 3 are included in the meter, based on the 4-stage wood type correction The device is supplied with a 9V battery  Technical Data Length 14 cm Width 9 cm Height 5 cm Weight 0.23 kg The device offered here is the basic measuring device without accessories. The following accessories are required for use:• Measuring cable MK8• Electrodes and probes• If required, carrying case, e.g. BK 14-I or BK-IIFurther details can also be found on the >> manufacturer's page Documents / Downloads   Bedienungsanleitung Deutsch  User Manual English  Mode d'emploi Français  Manuale Operativo Italiano

Learn more More Fewer

Precise thermo-hygrometer for quick measurements of relative humidity and temperature in cavities"Using fixed programmed sorption isotherms, weight or mass percentages can be determined for various construction and insulation materials as well as for hard and soft woods. The measuring device has a thin, flexible probe tube (gooseneck) and is therefore particularly suitable for moisture analyses, e.g. damage assessment or building drying. The testing of the readiness for installation of floor and wall coverings is also among the possible areas of application."   Features and Benefits• Handy quick moisture meter in pocket format for lightning-fast single or series measurements• Simultaneous display of up to three measurement values on the 3-line LCD display, resolution: 0.1 % or 0.1° C• Automatic calculation of the dew point temperature, the wood moisture equilibrium (UGL) *, the absolute humidity in g/m³, the enthalpy in kJ/K, the wet bulb temperature in °C, and the water activity (aw)• Sorption isotherms for hardwood and softwood as well as for 10 different types of building materials• Min, Max, and Hold function for the measured values• Storage of the 5 most recently recorded measurement values• Automatic device shutdown     Further detailsThe Hydromette Compact RH-T Flex is also available with a longer gooseneck (350mm instead of 250mm).The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data   Gann Article No.: 31013142 Measuring range: Air humidity: 0 – 100 % r.H. ± 1.8 % r.H. (10 – 90 % r.H.) Air temperature: -20 to +70 °C ± 0.5 °C (-10 to +70 °C) sensor tube: 250 x Ø 6.5 mm (gooseneck) Advertisement: Device/ambient temperature Automatic saving: last 5 measurements Calibration: Automatically Device shutdown: Automatically Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 175 x 50 x 30 mm Total length with probe approx. 440mm Weight: 180 gr. Special features: No separate electrodes or cables required 9V block battery included Guarantee: 2 years

Learn more More Fewer

This precise thermo-hygrometer enables quick and accurate measurements of relative humidity and temperature in hard-to-reach cavities. A special feature of this device is the integrated function for determining weight or mass percentages for a variety of construction and insulation materials, as well as for hardwood and softwood. This calculation is based on fixed programmed sorption isotherms and thus provides reliable results.The thermo-hygrometer is equipped with a thin, flexible probe tube shaped like a gooseneck. This design makes it particularly suitable for moisture analysis in demanding environments, such as during damage assessment or construction drying. Furthermore, the device can also be used to check the readiness for laying of floor and wall coverings, highlighting its versatility.Properties and Advantages• Handy quick moisture meter in pocket format for lightning-fast single or series measurements• Simultaneous display of up to three measurement values via the 3-line LCD display, resolution: 0.1 % or 0.1° C• Automatic calculation of the dew point temperature, the wood moisture equilibrium (UGL) *, the absolute humidity in g/m³, the enthalpy in kJ/K, the wet bulb temperature in °C, and the water activity (aw)• Sorption isotherms for hardwood and softwood as well as for 10 different types of building materials• Min, Max, and Hold function for the measured values• Storage of the 5 most recently recorded measurement values• Automatic device shutdown     Further detailsThe Hydromette Compact RH-T Flex is also available with a longer gooseneck (350mm instead of 250mm).The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data   Gann Article No.: 31013142 Measuring range: Air humidity: 0 – 100 % r.H. ± 1.8 % r.H. (10 – 90 % r.H.)Air temperature: -20 to +70 °C ± 0.5 °C (-10 to +70 °C) Sensor tube: 350 x Ø 6.5 mm (gooseneck) Advertisement: Device/ambient temperature Automatic saving: last 5 measurements Calibration: Automatically Device shutdown: Automatically Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 175 x 50 x 30 mmTotal length with probe approx. 440mm Weight: 180 gr. Special features: No separate electrodes or cables required9V block battery included Guarantee: 2 years

Learn more More Fewer