The M 20 is a penetration electrode for measuring wood moisture and construction moisture. It is based on the resistance measurement principle and can be connected to all corresponding "Gann" measuring devices. The electrode is suitable for moisture measurements of sawn timber (up to 50 mm thickness), chipboard and OSB boards, and parquet. With the help of a suitable striking device (e.g. hammer), the electrode can also be driven into hard woods such as beech. It is also applicable for measurements in soft bound building materials (e.g. plasters, gypsum, or aerated concrete) as well as insulation and insulating materials. Matching electrode pairs• M20-HW200, M20-HW300• M20-DS16, M20-DS16-i, M20-OF15• M20-Bi 200 and M20-Bi 300• M6-150 and M6-250Suitable base devices• Hydromette BL E• Hydromette HB 30• HT 85 T• M 4050• RTU 600• IT 2     The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 31003300Electrode M20 incl. 10 electrode tips of 16 and 23 mm 

Learn more More Fewer

This thermo-hygrometer allows for quick and uncomplicated monitoring of a healthy indoor climate, thanks to its clear display and simple operation, making it ideal for living and sleeping areas, offices, training rooms, and meeting rooms. Hair hygrometers, like this model, are characterized by their high precision. Equipped with a high-quality measuring mechanism 'Made in Germany', it ensures a measurement accuracy of ± 3 % r.H. in the range of 20 to 100 % relative humidity. The measuring principle is based on the length change of a specially treated synthetic fiber, which expands in moisture and contracts in dryness. This length change is converted into a rotational movement that controls the pointers on the display. The display of the hygrometer can be adjusted and calibrated through a simple zero point correction.   Ventilation recommendations   The display shows two scales with ventilation recommendations. During the cold season, the room humidity should not exceed 60%, while in summer, a slightly higher humidity of up to 70% in living areas is considered normal. Cooler basements, on the other hand, should not have more than 60% humidity year-round to avoid mold and odor formation. If the humidity remains above the suggested values despite ventilation, the use of a dehumidifier should be considered.     Hanging on the wall   This device is designed to be mounted on a wall. For this purpose, a suitable hole for a nail or screw is incorporated into the housing on the back. To ensure that humidity and temperature values are measured as accurately as possible, large air slots are provided on the sides. These allow for the free flow of room air and thus the best possible measurement. Please note that cold or poorly insulated exterior walls can distort the value. Therefore, optimal placement with reliable measurement values is on walls inside the building.     Recalibration   After transport, it may happen that the mechanical settings are altered due to vibrations. Additionally, accuracy may deteriorate if the thermo-hygrometer has been stored in a very dry environment for a long time. In this case, the humidity display can be easily corrected using a small screwdriver on the side adjustment screw. The temperature screw is accessible from the back of the housing (bottom hole). For calibrating temperature and humidity, it is easiest to use another thermo-hygrometer that you consider reliable for the values. Please note when adjusting by hand that warm, moist hands can also change the displayed values, just like breath.     Technical data   Measuring range temperature 0 - 40 °C Accuracy / Resolution ± 2 °C Measuring range humidity 0 - 100 % Accuracy / Resolution ± 3 % r.F. Housing stainless steel Measurement method Synthetic hair Trotec article no. 3.510.205.012 Guarantee 2 years

Learn more More Fewer

Ideal case for storing and transporting Gann measuring devices such as hydrometers and Hydromat CM devices. With specific inlays and padding.For storage / for transport of GANN hydrometers + accessories with specific inlays and padding. • For all Classic or BL hydrometers• Designed for a measuring sensor and various resistance-based electrodes The manufacturer Gann from Germany is one of the leading producers of high-quality moisture measuring devices. Gann measuring devices are very commonly used by professionals in construction drying. An ideal companion on construction sites for construction managers, architects, and floor layers.     scope of deliveryThe delivery includes the padded but unfilled case without devices.   Technical data  Gann Article No.: 31005061 Length: 0.437 m Width: 0.379 m Height: 0.100 m Weight: 1.530 kg

Learn more More Fewer

This hygrometer/thermometer is the most accurate measuring instrument for humidity and temperature in the "affordable" range in our offering."It is manufactured in a German precision factory for our company and has a very fast response time. The values are measured every 10 seconds, and the display alternates every 5 seconds between temperature and humidity. If a value changes significantly compared to the last measurement, this is additionally displayed as a trend with an arrow indicator pointing up or down."The hygrometer DFH can be hung on the wall or placed on the included stand. The modern, simple design also fits into living spaces or offices. "Two AAA batteries are required for operation (included in the delivery)"     Technical data   Dimensions (H x W x D)     10 x 8.5 x 2.6 cm Weight 97 gr. Measuring range 10% - 95% r. humidity Measurement accuracy 40 - 60%: max. deviation 2 % 10 - 39/61 - 95%: max. deviation 3 % (Resolution: 0.1 % r.H.) Ambient temperature -5°C - 55° at 20°C 0.3°C (Resolution: 0.1 % r.H.) Mass time every 10 seconds Protection class IP20 (not suitable for outdoor installation) Guarantee: 2 years

Learn more More Fewer

This flexible measuring device allows for quick and straightforward measurements of air velocity, air temperature, and air volume flow. It is ready for use immediately and presents the measurement values clearly on a large, backlit display. In addition to real-time measurement, minimum and maximum values can be retrieved, and the current measurement value can be recorded at the push of a button. A special feature is the flexible adjustable 40 cm long gooseneck, which allows measurements even in hard-to-reach places or at remote supply and exhaust openings. This makes the device an ideal tool for HSK installers when measuring exhaust grilles, ducts, and swirl outlets. Furthermore, the device is excellent for hobby athletes to determine wind strength as well as for performance monitoring of household appliances such as air conditioners and cooling fans in the IT sector. Advantages at a Glance   • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min)• Air temperature (in °C and °F)• Optimal price-performance ratio• Minimal value, maximal value, and hold function• Semi-flexible, 40 cm long gooseneck probe• Backlit display• Softtouch function keys• Automatic switch-off   Scope of delivery   • Measuring device• Battery• Carrying bag• User manual     Technical data   Air flow measurementMeasuring rangeaccuracyresolutionMessprinzip  1 - 30 m/s3 % (=0.2 m/s)0.01 m/simpeller  Measurement of air volume flowMeasuring range  1 to 999.9 m³/min  Measurement of air temperatureMeasuring range accuracy resolution  -10 °C to +60 °C ± 1.5°C 0.1 °C  Display  LCD Energy supply 9V Block Battery Ambient temperature 0 °C to +50 °C Mass (without goose neck) L x W x H 165 x 54 x 32 mm Weight 270 g Tripod thread no Automatic shutdown system and Trotec article no. 3.510.205.043 Guarantee 2 years

Learn more More Fewer

The user-friendly handheld measuring device is ready for use within seconds of being turned on and reliably captures temperature measurements in the range of -40 °C to +200/280 °C (probe/IR), which are clearly readable on the bright, backlit display even in poorly lit environments. The integrated infrared sensor measures the surface temperature of materials, especially food, with a response time of less than 500 ms. In addition to the digital temperature display, three indicator LEDs directly signal whether the measured temperature is within the HACCP ranges (Hazard Analysis and Critical Control Points). According to the HACCP guidelines for food, maintaining a temperature range below 4 °C and above 60 °C is crucial to prevent the growth of health-threatening microorganisms. Temperatures between 4 °C and 60 °C can promote germ growth. "For quick verification of compliance with these temperature limits, the BP5F food thermometer is equipped with three indicator LEDs in addition to the digital display, which visually represent the respective temperature range." The practical advantages include the combination of infrared and probe thermometer in one device, core temperature measurement from -40 °C to +200 °C (probe) or up to +280 °C (infrared), a 5 mm measurement spot diameter at a distance of 100 mm, a compact design with a retractable core temperature sensor, a robust and washable IP65 construction, a backlit display, an LED quick indicator for HACCP-compliant temperature ranges, compliance with LFGB regulations (§31) and DIN 10955:2004, as well as an optimal price-performance ratio.

Learn more More Fewer

With this high-quality laser scanner, surfaces such as interior walls and facades can be quickly and easily checked for potential mold risk due to cold spots. The device allows for a non-contact measurement of the wall surface temperature using infrared and simultaneously automatically determines the dew point temperature value. The backlit LCD display ensures a clear and easily readable display of measurement values even in unfavorable lighting conditions. The integrated 20:1 dual laser visualizes the measurement spot on the respective measurement object. For dew point determination, the device additionally measures the current room temperature and humidity. Thanks to the acoustic and visual alarm function based on the traffic light principle, as well as the integrated bar graph indicator, the user quickly receives information even with larger measurement areas about whether the dew point has been reached or fallen below at a measurement point, thus indicating a risk of condensation and mold. 'Since a long-term increased relative humidity of about 70% is sufficient for the formation of mold on material surfaces, the device warns both acoustically and visually several degrees before the actual dew point. Therefore, it is worthwhile to check cold wall areas to detect condensation early and take preventive measures.'     "With 20:1 optics, always keep the measurement spot in view"   Measure the surface temperature of walls, materials, and objects contactlessly, meaning without touching the measurement object. To accurately assess the measurement area (measurement spot), the device is equipped with a dual laser pointer. This projects two laser points onto the surface to be measured, precisely marking the diameter of the measurement spot. In this area, the temperature value is captured by an infrared sensor, and an average value is determined. The rule is: the smaller the measurement spot, the more accurate the measurement, and the further the measuring device is from the measurement object, the larger the measurement spot diameter will be. Thanks to its geometric resolution of 20:1, the handheld measuring device also allows for accurate measurements from several meters away.     Recognizing mold risk   Since the device also has an air temperature sensor and an air humidity sensor (measuring range from 0% to 100% relative humidity) in addition to the infrared surface temperature measurement, the dew point temperature is automatically calculated from these 3 values. In addition to the exact values, an audible signal and/or the color of the LCD display will indicate whether the measured values are in the critical range, if desired.   Green Display: everything is fine Oranges Display: Measured values are approaching the critical dew point value Red Display: Temperature is dangerously close to the dew point or has already reached or fallen below it, allowing condensation to form.   With the increasingly faster beeping sound signal, you can also work by ear if desired. Especially for large area measurements on walls, you can quickly scan where critical points are located with the acoustic and/or optical alarm – all without having to pay attention to the exact measurement values. In addition, the bar graph indicator displayed on the screen provides quick orientation with an easily understandable bar chart and schematically shows you on a scale from 0% to 100% how close the measurement values have come to the dew point temperature.     Versatile   Due to the large temperature measurement range of -50 °C to 260 °C, this measuring device is recommended not only for use as a dew point scanner but also for other applications. The non-contact infrared measurement reliably protects you from surfaces that are too hot or too cold.   "Whether it's heating systems, hot pipes, tanks, boilers, engine blocks, control boxes, or deep-freeze storage – measure temperatures without burning your hands or getting "stuck" to icy surfaces. This device can even be used for preparing baby food when you want to quickly check the correct drinking temperature of the bottle from the outside."     With its compact dimensions, the lightweight device weighing only 163 g can be conveniently carried in a jacket pocket. Additionally, a practical carrying case for attachment to a belt is included in the delivery.   The infrared thermometer is powered wirelessly by the included 9-volt block battery. Thanks to the battery status indicator in the LCD display, you always have the current charge level in view. The automatic shut-off when not in use is energy-saving – allowing you to perform countless measurement tasks!     Advantages at a Glance   • Measurement of surface temperature, air temperature, humidity, and dew point temperature with just one device• Dew point alarm indication through display color change, alarm tone, and bar graph indicator• Non-contact surface temperature measurement via infrared from -50 °C to 260 °C• Messoptik 20:1• Messfleck diameter display via dual laser pointer• Backlit display• Auto shut-off• Practice-oriented German industrial design – protected design pattern• Optimal price-performance ratio   Scope of delivery   • Measuring device • 9V Battery• User manual• Protective bag     Technical data   Optical resolution (D:S) 20:1 Smallest measuring spot Ø 25.4 mm (Distance 508 mm) Measuring range sensor -50 to +260 °C Deviation Sensor ± 3.5 Deviation sensor at 20 °C 1 % ± 1.5 Measuring range of integrated temperature sensor 0 to +50 °C Dew point temperature -30 to +100 °C Dew point deviation ±2.0 % Measuring range humidity 0 to +100% r.h. Humidity Deviation ±3.5 % (between 20-80 % r.F.) Response time temperature sensor Spectral Sensitivity 8 - 14 µm Energy supply 1 x 9 V block battery (included in delivery) Masse (H x B x L) 82 x 58 x 168 mm Weight 163 g Trotec article no. 3.510.003.035 Guarantee 2 years

Learn more More Fewer

A precise measuring device for quick control and monitoring of environmental noise, workplace noise, and in private surroundings. Measures sound sources within a measurement range of 30 to 130 dB(A). Additionally, minimum and maximum values can be displayed and stored.   This easy-to-handle sound level meter combines modern electrodynamic transducer technology in a compact design. As a sound level meter according to accuracy class 2, the device is ideally suited for the documentation of machine and environmental noise, as well as workplace and noise hazard measurements.   The large four-digit measurement display with additional bar graph representation is easy to read in any environment thanks to the LCD backlighting.   With A- and C-frequency weighting, fast-slow time weighting, and many other practical features, this measuring device from the Multi-Measure Professional series represents the perfect solution for demanding sound level measurements.   Compact format, lightweight, and button layout optimized for one-handed operation.      Versatile application, for example   • Noise hazard measurements for occupational safety• Environmental protection operations for the determination of ambient noise• Determination of noise areas for noise reduction programs in companies• Control and selection of hearing protection devices• Compliance monitoring of noise protection regulations• Control measurements in climate and heating technology     Advantages at a Glance   • Corresponds to accuracy class 2• Frequency assessment according to characteristic A and C• Maximal and Minimal Value Storage• Storage for 50 measurement values• Switchable time evaluation (Fast?/?Slow)• Display lighting• BarGraph display• 1/4-inch tripod thread     scope of delivery   • measuring device • Battery• Wind protection • Carrying case• User manual     Technical data  Sensory Sound dB(A) + Sound dB(C) sound measuring range  30 - 130 dB(A) sub-measuring ranges 30...80 dB, 50...100 dB, 80...130 dB, 30...130 (auto) dB(A) accuracy Class 2 according to DIN EN 61.672 resolution 0.1 dB(A) response time 0.5 seconds frequency range 31.5 Hz - 8 kHz dynamic range 50 dB data storage 50 measured values Power supply 9V Block-Batterie operating time > 30 Std. Weight 230 g Masse (H x B x T) 210 x 55 x 32 mm Vicinity: temperature humidity 0 - 40 °C 10 - 90 % r.H. (non-condensing) Trotec article no. 3.510.005.010 guarantee 2 years

Learn more More Fewer

The M6 insertion electrodes are accessories for Gann professional measuring devices such as Uni2 and all hydrometers that are based on the resistance measurement method. The electrodes are always used in pairs. They measure the resistance between the two insertion tips, which should ideally be inserted into the test material at a distance of about 8 - 10 cm from each other.The M6 is suitable for measuring hard bound building materials (e.g. concrete or screed). "For use, you need a basic measuring device such as Uni1 or Uni2 as well as a measuring cable MK8. The delivery includes 10 electrode tips of 40 and 60 mm length each. The M6 also serves as a carrier for other electrode pairs:"Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250Suitable base devices• Hydromette BL E, Hydromette HB 30, HT 85 T, M 4050, RTU 600, UNI 2 The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 310037002 carrying handles, incl. 10 electrode tips of 40 and 60 mm

Learn more More Fewer

The thermostat Master TH5 enables precise, temperature-dependent control of the heater Master B18EPR. Using a stepless rotary switch, the shut-off point of the heater can be set in the range of 0°C to +36°C. Without this thermostat, the heater would run continuously, with the option to choose between pure recirculation operation, 9kW or 18kW heating power. The TH5 is equipped with a 3-meter long cable and a suitable plug, allowing for straightforward installation. It can be plugged directly into the designated socket at the operator area on the back of the heater without any further adjustments required. Thus, the installation is extremely user-friendly and self-explanatory. However, it is important to note that the Master B18EPR is not suitable for operation in rooms with a temperature above 25°C. However, the use of the thermostat is possible without any issues if the temperature in another room is to be regulated and the heater itself is positioned outside of that room, for example, when the warm air is directed into the room to be heated via a hose.   Technical data  Contact Voltage / Current: 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 1 kg Control area 0 - 36°C Application Stepless rotary controlis plugged directly into the heater fan Cable length 3m Master Article no. 4150.109 Guarantee 2 years

Learn more More Fewer

This electronic moisture indicator allows for precise depth measurement of moisture in solid materials such as masonry, concrete walls, and floors up to a depth of 4 cm. This is particularly useful for quickly locating water damage after a pipe break or for easily monitoring the drying progress of subfloors. Thanks to the dielectric measurement method, moisture measurement is completely non-destructive, without the need to insert electrodes or probes into the material being measured. The reaction time is less than one second, so results are available almost immediately. At the push of a button, additional information such as minimum and maximum values can be displayed on the easily readable, backlit display. Furthermore, the device features a hold function, allowing the current measurement value to be easily retained.     Functions   • Minimal and Maximal Value Display• Hold Function• Illuminated Display• Automatic switch-off     Advantages at a Glance   • Fast and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Minimal value, maximal value, and hold function• Automatic function and battery test• Ready to use• Optimal price-performance ratio• Illuminated Display• Automatic switch-off    Scope of delivery   • Measuring device• Battery• User manual     Technical data   voltage 9V Battery Measuring range digits 100 Resolution and Accuracy 1 Digit Messprinzip dielectric / capacitive Penetration depth 5 - 40 mm (non-destructive) Ambient temperature 0 - +50 °C ambient air humidity 0 - 80 % r.F. Dimensions L x W x H 180 x 35 x 45 mm Weight 180g Trotec article no. 3.510.205.031 Guarantee 2 years  

Learn more More Fewer

This compact pocket-sized pH meter proves to be a versatile tool suitable for both hobbyists and professional applications. It is ideal for aquarium and plant enthusiasts as well as pool owners, but also for quality control in the beverage and food industry or for quick and reliable water testing. In particular, in natural ponds, which have become increasingly popular in recent years, regular monitoring of the pH level allows for the avoidance of unexpected changes. Due to rain or the refilling with tap water, the pH level can easily shift into the acidic or basic range, which can negatively affect the health of the fish. "In swimming pools and private swimming pools, monitoring the pH level is essential to protect the health of bathers and to extend the lifespan of pool materials." Thanks to the automatic temperature compensation and auto-calibration, the measuring device allows for a quick and precise determination of the pH value in the range of 0 to 14 at temperatures between 0 and 50 °C. The device features a factory 3-point calibration that can be easily repeated if necessary. The measurements are displayed on a clearly readable two-line display, which simultaneously shows the pH value and the water temperature. The replaceable pH electrode and the water temperature sensor are protected by a protective cap, and a hold function makes it easier to read the measurements. An automatic shut-off contributes to energy savings.     Advantages at a Glance   • Two-line display for simultaneous display of pH value and water temperature• Automatic Temperature Compensation (ATC) for accurate measurements at different temperatures of the liquids to be tested.• Factory 3-point calibration• Auto-calibration for pH 4.01/7.00/10.01• Easy to replace pH electrode• Automatic switch-off• Message retention function• Optimal price-performance ratio• Including pH buffer solution set (4.01/7.00/10.01) and protective cap   Note: The device is already factory calibrated using a high-concentration salt solution. This often leads to the formation of salt crystals on the diaphragm electrode (fiber bundle) in practice later on. The visible residues are completely normal for pH measuring electrodes of this type."They are harmless to the electrode, can be easily rinsed off with water, and therefore do not constitute a quality defect."     Scope of delivery • Measuring device • Batteries • Operating instructions • pH buffer solution set (4.01/7.00/10.01) and protective cap     Technical data   voltage 4 x flat batteries LR44 Display LCD PH value Measuring range: 0 - 14 pHResolution: 0.01 pHAccuracy ±: 0.03 pH Temperature Measuring range: 0 to 50 °C / 32 to 122 °F Accuracy: approx. ± 0.8 °C / ±1.5 °FResolution: 0.1 °C / 0.1 °F Ambient temperature 0°C to +50 °C humidity 10 - 85 % r.F. Dimensions L x W x H 188 x 38 x 38 mm Weight 83g Protection class IP65 Guarantee 2 years

Learn more More Fewer

This sensor is an electronic moisture indicator that non-destructively measures the capacitive moisture in solid materials such as walls, floors, or ceilings up to about 3-4 cm deep. The measuring device is ready for use immediately, can be easily connected with the app, and allows you to quickly and easily locate surface moisture distributions. "Not only is the quick indication of various surface moisture values possible, but this sensor is also particularly well-suited for the preliminary assessment of the readiness of building materials in CM measurements."  Extended evaluation and functionality thanks to the app Compared to non-app-supported moisture measuring devices, users of this device benefit from numerous additional advantages in terms of flexibility, analysis functions, data control, and documentation with the free app "Multimeasure Mobile." Compare different moisture measurements of an object, which were taken at different times, directly in the app. Or use the measurement values in combination for differentiated analyses directly on site. Useful additional features such as the alarm function, the export of moisture measurement values to further analysis software, and the creation of a report complete the universal application possibilities of the BM31WP and make this measuring device a valuable tool in the field of structural diagnostic tasks. With the MultiMeasure Mobile App, not only can the MIN, MAX, and average values be displayed automatically or individual measurement values marked directly in an image, but also elaborate graphical representations in the form of a photo-linked moisture matrix can be created, saved, and sent. The grid to be measured can be overlaid with a real image and later output as an overlay graphic with the moisture matrix for documentation – for example, for your measurement report, which you can generate and send directly on-site from the app.  What is an AppSensor? Trotec appSensors are compact precision measuring devices with high-quality sensors, designed to save energy and space, and do not have evaluation electronics or display units, as operation and data evaluation of the devices are almost entirely handled via the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages.   App "Multimeasure Mobile" "MultiMeasure Mobile" offers a variety of advantages for you: • Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Measurement display numeric or as diagram / matrix• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud   Your mobile device becomes a multifunctional measurement data manager. All app sensors are automatically recognized and can be connected and read via Bluetooth with the app. The operation is as simple and intuitive as the installation.    Advantages at a Glance • Quick and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Professional sensor technology for precise measurement results• Easy app connection via Bluetooth with optical connection confirmation via LED on the device• Wireless measurement device control and data display via app• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device.• Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Wrist strap for secure handling included• Automatic switch-off Trotec appSensors house professional sensors for precise measurement results, specifically developed for this purpose. Therefore, for professional measurements, use the clever combination of appSensor and MultiMeasure Mobile – the free app available for iOS and Android.  scope of delivery  • measuring device• Batteries• Hand strap• User manual     Technical data   Measuring range 0 - 100 Digits resolution 0.1 Digit Messprinzip dielectric / capacitive Ambient temperature 0 °C to 50 °C ambient humidity 10 - 90 % r.H. (Storage: max. 80% r.H.) Bluetooth 4.0 (BLE), max. 10 m transmission range in open area Masse (L x B x H) 160 x 36 x 22 mm Weight 93 g Trotec article no. 3.510.206.031 guarantee 2 years      

Learn more More Fewer

Ideal case for storing and transporting Gann measuring devices such as hydrometers and Hydromat CM devices. With specific inlays and padding.The delivery includes the padded but unfilled case without devices. • For all Classic or BL hydrometers• Designed for up to three measuring sensors and various resistance-based electrodes The manufacturer Gann from Germany is one of the leading producers of high-quality moisture measuring devices. Gann measuring devices are very commonly used by professionals in construction drying. An ideal companion on construction sites for construction managers, architects, and floor layers.  Technical data  Gann Article No.: 31005062 Length: 0.497 m Width: 0.411 m Height: 0.120 m Weight: 1.910 kg

Learn more More Fewer

As a thermal anemometer, this handheld measuring device impresses with high measurement sensitivity and is particularly suitable for the precise determination of even low flow velocities. It is ready for use immediately, can be easily connected to the app, and displays all measurement values on the mobile device. Through the clever combination of appSensor and the associated free app Multimeasure Mobile, users in practice benefit from numerous advantages in terms of flexibility, analysis functions, data control, and documentation. "Compare measured data directly on the mobile device or use the measurement values in combination for differentiated analyses on-site. The infinitely adjustable probe design in length and numerous useful performance features enable universal use for many measurement tasks." The logging function is helpful for long-term measurements, the graphical representation of your measurement data, or their export to further analysis software, as well as the possibility of creating a report. From performance monitoring of household appliances to climate and ventilation systems, to cooling fans in the IT sector, this measuring device is an ideal companion for flow measurements, even in hard-to-reach places.  App-Sensor Trotec app sensors are compact precision measuring devices. They feature high-quality, energy- and space-saving sensors. The display, operation, and evaluation of the data are done via the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages.   Advantages at a Glance   • Quick and easy measurement of air velocity, air temperature, and air volume flow (CMM)• Retractable, 375 mm long telescopic probe• High-quality sensors and numerous measurement functions• Professional sensor technology for precise measurement results • Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Intelligent combination of appSensor and the app MultiMeasure Mobile • Easy app connection and control via Bluetooth with optical connection confirmation via LED on the device• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device. • Automatic switch-off • Wrist strap for secure handling included   "MultiMeasure Mobile" – Free app for iOS and Android "For the smartphone operation of this appSensor, you need MultiMeasure Mobile – a free app for controlling, evaluating, and displaying measurement data from all appSensors connected to your mobile device from Trotec." MultiMeasure Mobile offers a variety of advantages for you:• Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Numeric or diagram/matrix display of measurement values?• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud  All app sensors are automatically recognized by "MultiMeasure Mobile" and can be connected and read via Bluetooth with the app. The operation is just as simple and intuitive as the installation. Simply download MultiMeasure Mobile for free to your mobile device.     Technical data   flow velocity Measuring range             0 - 30 m/s (Resolution 0.01) 0 - 67 mph (Resolution 0.01) 0 - 108 km/h (Resolution 0.01) 0 - 58 kn (Resolution 0.01) 0 - 5900 ft/min (Resolution 1.0)   temperature Measuring range     accuracy       -20 °C - +60 °C (Resolution 0.1) -4 °F - +140 °F (Resolution 0.1)   ±0.8 °C (-20 °C - 0 °C) ±0.5 °C (0 - +60 °C)   humidity Measuring range   accuracy       10 - 90 % r.H. (Resolution 0.1)   ±3.5 % r.F (20 % - 80 % r.F.) ±5 % r.H. (0 % - 20 % and 80 % - 100 % r.H.)   Bluetooth 4.0 BLE, 10 m range in open area energy supply 3 x 1.5V, AAA batteries Masse (L x B x H) Device 320 x 36 x 22 mm Telescopic probe extendable approx. 235 mm Weight 122 g Trotec article no. 3.510.206.043 guarantee 2 years

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The Master TH5 thermostat allows the Master B18EPR heater fan to be controlled based on temperature. Using a stepless rotary switch, the shut-off point of the heating can be adjusted in a range between 0° to +36°C. Without this thermostat, the heater operates continuously, optionally in pure recirculation mode, with 9kW or 18kW heating power.The TH5 comes with a 10m cable as well as the appropriate plug. It can be plugged directly into the operator area on the back of the heater in the designated socket without any further device adjustments. The connection is therefore very easy and self-explanatory.Please note that the Master B18EPR is not suitable for operation in rooms above 25°C. However, the use of the thermostat is straightforward if the temperature is to be maintained in another room and the heater itself is located outside, that is, when warm air is blown into the room to be heated via a hose.  Technical data  Contact voltage / current 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 2 kg control area 0 - 36°C Application Stepless rotary control is plugged directly into the heater fan Cable length 10m Master Article no. 4150.112 guarantee 2 years

Learn more More Fewer

This room hygrometer is suitable for humidity-dependent control of the TTK170ECO or other dehumidifiers with a 6.35 mm jack for external connection, for example for unattended drying processes where a target humidity must not be undershot (for instance, with fresh plaster or plastering work) or to reduce power consumption when a too low humidity is not necessary.    The HG 110 features a 6.35 mm jack plug, operates in the low voltage range, and is designed for a maximum load of 2 A. The three-meter long cable allows the measurement point to be different from the location of the dehumidifier.     application examples   It serves as a two-point controller for regulating relative humidity, for example, on indoor construction sites, in basements, in climate cabinets, or for controlled dehumidification of office and computer rooms. Other areas of application include storage for goods or food, cold storage for fruits and vegetables, greenhouses of horticultural businesses, textile industry, paper and printing industry, film industry, hospitals. Wherever humidity needs to be regulated or monitored, this humidity controller with the corresponding dehumidifier can be used.      Functionality and Installation Location   The installation location should be chosen in such a way that a representative measurement of humidity is ensured, i.e., the humidity measurement values at the installation location should correspond to those of the room, and the hygrometer should be in the airflow. The room hygrometer reacts quickly and accurately to changes in humidity. By adjusting the setpoint knob, the lever system is engaged in such a way that when the set humidity is reached, the internal microswitch is activated.     Technical data   Measuring range 40 - 90 % relative humidity Measurement accuracy +-3% suitable ambient temperature 0 - 60° C suitable ambient humidity 40 - 90 % Tension 24 V max. switching load 2 A Cable length 3 Meters connector 6.35 mm jack 1/4" Protection class IP20 guarantee 2 years

Learn more More Fewer

Moisture Meter TFA Contactfor the detection of moisture in walls, ceilings, and floors. The electronic moisture indicator TFA Contact with non-destructive measurement method based on the dielectric constant/high-frequency measurement operation is an affordable, easy-to-use measuring device for quick detection of moisture. It features a digital LCD display and a flexibly usable ball probe for non-destructive detection of moisture in building materials of all kinds as well as for identifying moisture distribution in walls, ceilings, and floors.In terms of type and handling, it is very similar to the Gann Hydromette Compact B. For a quick overview of the moisture level and for detecting water damage even measured at depth, it is absolutely sufficient. The price difference compared to the Gann device mainly lies in the measurement depth (4cm for TFA Contact compared to up to 6cm for Gann) as well as in the detailed measurement in the very wet range, where the TFA Contact already shows 100% moisture at "practically fully wet," while the Gann moisture meter still differentiates in this area. A simple example: when measuring through a PET bottle, the TFA Contact shows 100% moisture while the Gann Hydromette recognizes the thin PET wall and displays a slightly lower value according to the plastic thickness.  Features of TFA Contact Moisture Meter: - shock-resistant plastic- Sensor type metal spheroid- Penetration depth 20 - 40 mm- Switchable LCD backlight- Auto-off function- The measuring principle is the electrical resistance in the material.- Moisture measurements of concrete, brick walls, plaster, mortar, etc.- Max-Min Function- Hold Function- Moisture measurements without damaging the surface2 year guarantee Technical data   Messbereiche: 0 - 100 digitsResolution: 1 digitPenetration depth: 20 - 40 mmMessprinzip:Device Calibration: Capacitive (Electrical Resistance)manual calibrationSensor type: Metal spheroidDisplay: LCD ScreenPower supply: 1 x 9 V block batteryDimensions (H/W/D):      200 x 48 x 34 x mmWeight: 150 gr.Warranty: 2 years

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer