Here you'll find dehumidifiers for household use and for professional water damage drying. Dehumidifiers for keeping damp basements or apartments dry, as well as for drying laundry.
Dehumidifiers
TROTEC Trotec Industrial Dehumidifier DH15
A reliable wall-mounted dehumidifier with an appealing design. A durable, corrosion-protected construction made of powder-coated, galvanized steel sheet ensures maximum reliability for this industrial condensate dryer and makes it particularly resistant to environmental influences thanks to its protective-coated heat exchanger. The combination of high efficiency and low-maintenance design makes the dryer ideally suited for fully automatic, hygrostat-controlled continuous drying applications in numerous fields of use, and thanks to its autonomous recirculation operation, it can also be easily integrated into any application environment afterwards. With its KTL-coated heat exchanger, it is also extremely resistant to environmental influences even in particularly reactive air environments with high salt, chlorine, or solvent content. Hygrostat controlled and protection against manipulation The built-in hygrostat automatically regulates the humidity to an optimal level, where condensation, mold, or corrosion have no chance. The target humidity can be freely adjusted according to your needs. High efficiency is ensured by the quiet-running AC axial fan and the powerful compression refrigeration system. The dry air supplied to the room is simultaneously heated for process technology, so that the use of conventional heating and ventilation energy can be reduced. Thanks to high-quality hot gas automation, the dryer requires only very short defrosting phases. This is optimal, especially for dehumidifying unheated rooms, as it improves the performance and increases efficiency. The controls are protected against unauthorized access, making this industrial dryer also the ideal dehumidifier for public buildings, staff and changing rooms, or museums. Wide range of applications In wall operation, the device can be used for a variety of applications, for example: • Humidity control in staff rooms, changing rooms, lounges, and break rooms• Drying of changing rooms, gyms, bike and ski cellars• Constant humidity conditions in garages, workshops, test benches, or production halls• Dehumidification in archives, collections, or libraries• Dehumidification of water engineering facilities and pumping stations to prevent condensate formation on pipes or pumps• Humidity control during the storage of natural products, for example for quality assurance in wood storage or during the storage of raw tobacco.• Corrosion prevention in electrical switchgear, boiler systems, turbines, and piping systems in power plants or during the storage of raw bodies and metal components.• Humidity control in data centers, control rooms, etc.• Moisture control in the food industry, for example in cheese production or confectionery manufacturing Due to the horizontally directed recirculation airflow and its compact design, the plug-and-play dehumidifier is particularly well suited for installation above door areas. The condensate drawn from the air is directly drained through a downward laid hose. If the water needs to be drained to higher areas, please also consider our pump kits. Advantages at a Glance • Professional quality, made in Germany• High dehumidification performance even at low temperatures• Corrosion-protected construction• Fully automatic operation• Professional hot gas defrosting automatic system• Quiet AC axial fan for horizontal recirculation airflow• Optimal suited for installation above door areas• Control elements installed protected from unauthorized access• Available optionally with condensate pump Technical data dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H. 11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 657W Recommended Coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in the delivery operating noise 53 dB(A) at 1 m distance 49 dB(A) at a distance of 3 m Masse (B x H x T) 840 x 330 x 365 mm Weight 37 kg defrosting automatic Heissgas dehumidification automation mechanical hygrostat wheel, stepless Ventilator axial, single-stage blower prefilter and operating hour meter no Continuous operation possible and Display no memory function yes (set values remain mechanically fixed) Trotec article no. 1.125.000.111 guarantee 2 years Documents / Downloads User Manual German User manual French User manual Italian User manual English
Fr. 2'200.00
Aerial Aerial AERCUBE AD40 Dehumidifier
The AD40 is versatile and so lightweight that it can be carried like a suitcase. Thanks to the BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperature.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Water bucket or optional pumpThe water collection container (6.8 liters) is easy to remove, carry, and empty. It is located inside, with the water level of the bucket measured by a float. When full, it automatically interrupts operation, and operation automatically restarts when the bucket is replaced. An optional matching pump kit is available, which is versatile and suitable for unattended continuous operation.Robust housingThe housing is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used for connecting additional devices. Four robust, stable plastic feet for floor placement. Stackable with other Aerial Aercube devices.Characteristics • Case: made of robust, impact-resistant, and UV-resistant plastic, lightweight. Fixed points for AERCUBE® lashing system. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Optional pump kit available.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other. Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity." dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H = 35.0 Liters / 24h (Power consumption: 520W) 27°C / 60% r.H. = 22.0 Liters / 24h (Power consumption: 430W) 20°C / 60% r.H. = 15.0Liters / 24h (Power consumption: 370W) 10°C / 70% r.H. = 8.0 Liters / 24h (Power consumption: 300W)(r.H.=relative humidity) Technical data Tension: 230V / 50Hz Power consumption: max. 530W Sound pressure level: 1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification capacity: max. 35.0 liters / day (30°C / 80% r.H) Bucket: Capacity 6.8 liters, Operational interruption due to swimmer Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant: R407C Dimensions (H/W/D): 580 / 390 / 450 mm Weight: 25 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug: Yes hose connection: Connection fitting for direct hose connection Optional Pump Kit Operating hour meter: Yes Guarantee: 2 years Documents / Downloads User Manual German
Fr. 2'380.00
Dantherm Dantherm CDF10 Dehumidifier, white
Massively built wall unit for dehumidifying rooms up to 25m2/70m2, ideal for bathrooms, saunas, archives, or hobby rooms. The device is available in two versions, with and without a condensate tank (direct hose connection is possible for both versions), color silver or white.The air intake is at the front, and the dry air is expelled on both sides. For good circulation, the CDF10 should therefore have at least 30 cm of free space on each side. The device automatically switches off at temperatures below 3°C. Recommended ambient temperature 8-30°C."What is special about the CDF10 is that the hygrostat switch (for setting the desired room humidity) is located behind the front panel, which is secured with two screws. This protects it from unauthorized changes to the target humidity. Therefore, the CDF10 is particularly well-suited for public spaces."The wall mounting is done using the wall bracket included in the delivery, and the condensate is drained via the hose connection at the bottom of the dehumidifier (the hose must slope downwards, as no pump is integrated). Alternatively, the dryer is also available with an integrated 5.5-liter bucket for collecting the water. The CDF10 is one of the quieter dehumidifiers. The operating noise is audible in the immediate vicinity, but hardly noticeable with closed doors. This model is offered identically under the name of the Danish manufacturer "Dantherm" as well as "Krüger CDF10." Technical dataVoltage: 230 V AC, Swiss plugPower consumption: 300W max.Coverage: 2.1 A/TSound pressure level: 1m distance 49 dB(A)2.5 m distance 46 dB(A) Dehumidification capacity: 10 liters/day (30°C / 80% r.H.) Refrigerant: R134a (190g)Dimensions (H/W/D): 60 x 54 x 25 cm without tank81.5 x 54 x 25 with tankWeight: 28 kg without tank30 kg with tankAmbient temperature: 8°C ~ 30°C (our recommendation)Warranty: 2 years
Fr. 2'549.00
Aerial Aerial AD935 Dehumidifier
Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935 features both an 8-liter condensate tank and a connection nozzle for direct drainage of the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device. service The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required High service friendliness The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary. Features at a glance • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 34.0 liters / 24h (Power consumption: 610 W)20°C / 60% r.H. = 16.5 liters / 24h (Power consumption: 450 W)(r.H.=relative humidity) Technical data Tension 230V / 50Hz Power consumption 610 W max. Sound pressure level 2.5 m distance 51 dB(A) dehumidification performance 34 liters/day (30°C / 80% r.H.) condensate tank Approx. 8 liters Air volume level 1 / 2 300 / 420 m³/h (Night mode: 300 m³/h) Compressor Rotary compressor refrigerant R454C Dimensions (H x W x D) 860 x 392 x 508 mm Weight 35.4 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C 30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years
Fr. 2'591.00
Aerial Aerial AD935S Dehumidifier
Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935S features both an 8-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically detects the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. The air is expelled through two Ø100mm nozzles, which blow the air into the room at a good speed. Air hoses can also be attached to these nozzles if the dry air needs to be directed precisely to a specific location. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device. service The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required High service friendliness The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary. dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 28.0 liters / 24h (Power consumption: 785 W)20°C / 60% r.H. = 13 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity) Features at a glance • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 1-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Equipped with a 1kW electric heating element and 2x Ø100mm duct connections• Maintenance and service friendly Technical data Tension 230V / 50Hz Power consumption 785 W max. (1785 W with additional heating) Recording supplementary heating +1000W Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 28 liters/day (30°C / 80% r.H.) condensate tank Approx. 8 liters air volume 400 m³/h Compressor Rotary compressor refrigerant R454C Dimensions (H x W x D) 860 x 391 x 505 mm Weight ca. 36 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C 30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years
Fr. 2'804.00
Aerial Aerial AD740 Dehumidifier
A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs. The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity." dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W) Technical data Tension: 230V / 50Hz Power consumption: max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.) Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor: Rotary compressor refrigerant: R407c (550gr.) Dimensions (H / W / D): 690 x 390 x 470 mm Weight: 32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years
Fr. 2'890.00
Master Master DH7160 Dehumidifier
This exceptionally powerful, mobile dehumidifier, which operates on three-phase power, is characterized by its remarkable versatility. It is the ideal solution for reliably keeping storage rooms dry, where moisture-sensitive products such as medications, hardware, paper and leather goods, or electronic devices are stored. Furthermore, it excels in drying water damage and in industrial applications, for example, in drying herbs or laundry. Thanks to its strong airflow, it is capable of distributing dry air widely throughout the room, ensuring uniform dehumidification.The operation of the device is incredibly simple via the digital control panel on the front. Here, the desired target humidity can be precisely set in 1% increments. The clear display shows both the currently measured room humidity and the set target humidity. A particularly practical feature is the "Memory" button, which allows the set values to be saved. This ensures that the dehumidifier automatically resumes operation with the previously saved settings after a power outage, enabling uninterrupted and efficient operation. The humid air is drawn in from the front and cleaned through a reusable air filter. The dry air is blown upwards into the room with a high-quality radial fan and a lot of pressure. The ventilation is single-stage.The water is standardly directed through a hose to a lower floor drain (no tank present in the device). The suitable condensate water hose has an inner diameter of 16mm and can be directly attached to the water connection without a coupling (for additional fixation, a clamp can be used if necessary). Characteristics• Housing: Coated steel sheet• Setup: Four abrasion-resistant rubber feet (2 of them with brakes) for floor mounting• Airflow: Air intake front / Air outlet top• Carrying handle: Two stable, foldable handles on the side for pulling the device. • Air filter: Protects the device from dust, washable• Fan: 1-stage, high-quality radial fan• Condensate drain: direct hose connection, suitable hose with 16mm inner diameter.• Memory Function: After a power interruption, the device resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Defrosting: Automatic demand-controlled self-defrosting• Compressor: Rotary compressor with phase protection• Suitable for unattended continuous operation The DH7160 is suitable• as a large area dehumidifier• for dehumidifying storage rooms, archives, commercial spaces, industrial halls up to 500m²/1300m³ and for drying water damage• for unattended continuous operation• for operation on a timer dehumidification performanceThe dryer can be used over a temperature range of +5°C to +32°C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 166.0 liters / 24h20°C / 60% r.H. = 57.6 Liters / 24h(r.H.=relative humidity) Scope of delivery• Plug-and-play device (only the wheels need to be screwed on)• short piece of hose (deposited behind filter upon delivery)Technical data Tension High current 3 phase (3N 380-400 V / 50 Hz) Power consumption max. 2820 (3.9A) Sound pressure level 1 m distance: 73 dB(A)2.5 m distance: 70 dB(A) dehumidification performance max. 166 liters/day (30°C / 80% r.H.) Recirculation air volume 1-stage 1700 m³/h water bucket direct hose connection, no bucket Compressor Rotary compressor refrigerant R407C / 1.39 kg Dimensions (H x W x D) 1624 x 582 x 410 mm Weight 124 Kg Operational cessation Digital Operator Panel Ambient temperatureAmbient humidity 5°C ~ 32°C30 - 90% r.F. Area of application up to 500 m² (or 1300 m³) Swiss plug High current plug CEE16 hose connection Yes operating hour meter No Consumption meter kWh No Guarantee 2 years Even more powerful dehumidifiers"If you are looking for even more powerful dehumidifiers, also check out our section "Adsorption dryers"
Fr. 3'290.00
TROTEC Trotec Industrial Dehumidifier DH30
A reliable wall-mounted dehumidifier with considerable dehumidification power and an appealing design. A durable, corrosion-protected construction made of powder-coated, galvanized steel sheet ensures maximum reliability for this industrial condensate dryer and makes it particularly resistant to environmental influences thanks to its coated heat exchanger. The combination of high efficiency and low-maintenance design makes the dryer ideally suited for fully automatic, hygrostat-controlled continuous drying applications in numerous fields of use, and thanks to its autonomous recirculation operation, it can also be easily integrated into any application environment afterwards. With its KTL-coated heat exchanger, it is also extremely resistant to environmental influences even in particularly reactive air environments with high salt, chlorine, or solvent content. Hygrostat controlled and protection against manipulation The built-in hygrostat automatically regulates the humidity to an optimal level, where condensation, mold, or corrosion have no chance. The target humidity can be freely adjusted according to your needs. High efficiency is ensured by the quiet-running AC axial fan and the powerful compression refrigeration system. The dry air supplied to the room is simultaneously heated for process technology, so that the use of conventional heating and ventilation energy can be reduced. Thanks to high-quality hot gas automation, the dryer requires only very short defrosting phases. This is optimal, especially for dehumidifying unheated rooms, as it improves the performance and increases efficiency. The controls are protected against unauthorized access, making this industrial dryer also the ideal dehumidifier for public buildings, staff and changing rooms, or museums. Wide range of applications In wall operation, the device can be used for a variety of applications, for example: • Humidity control in staff rooms, changing rooms, lounges, and break rooms• Drying of changing rooms, gyms, bike and ski cellars• Constant humidity conditions in garages, workshops, test benches, or production halls• Dehumidification in archives, collections, or libraries• Dehumidification of water engineering facilities and pumping stations to prevent condensate formation on pipes or pumps• Humidity control during the storage of natural products, for example for quality assurance in wood storage or during the storage of raw tobacco.• Corrosion prevention in electrical switchgear, boiler systems, turbines, and piping systems in power plants or during the storage of raw bodies and metal components.• Humidity control in data centers, control rooms, etc.• Moisture control in the food industry, for example in cheese production or confectionery manufacturing Due to the horizontally directed recirculation airflow and its compact design, the plug-and-play dehumidifier is particularly well suited for installation above door areas. The condensate drawn from the air is directly drained through a downward laid hose. If the water needs to be drained to higher areas, please also consider our pump kits. Advantages at a Glance • Professional quality, made in Germany• High dehumidification performance even at low temperatures• Corrosion-protected construction• Fully automatic operation• Professional hot gas defrosting automatic system• Quiet AC axial fan for horizontal recirculation airflow• Optimal suited for installation above door areas• Control elements installed protected from unauthorized access• Available optionally with condensate pump Technical data dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H. 20 liters / day 46 liters / day air volume max. 635 m³/ h Maximum room size 130 m² (325 m³) temperature range 5 - 40°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 4.2 A Power consumption max. 922W Recommended Coverage 16 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (500g) GWP1774 hose connection Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in the delivery operating noise 56 dB(A) at 1 m distance 52 dB(A) at a distance of 3 m Masse (B x H x T) 790 x 651 x 255 mm Weight 47 kg defrosting automatic Heissgas dehumidification automation mechanical hygrostat wheel, stepless Ventilator axial, single-stage blower prefilter and operating hour meter no Continuous operation possible and Display no memory function yes (set values remain mechanically fixed) Trotec article no. 1.125.000.116 guarantee 2 years
Fr. 3'299.00
Aerial Aerial AD955 Dehumidifier
Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-955 features both a 13-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device. service The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required High service friendliness The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary. Features at a glance • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 53 liters / 24h (Power consumption: 830 W)20°C / 60% r.H. = 22.5 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity) Technical data Tension 230V / 50Hz Power consumption 830 W max. Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance 53 liters/day (30°C / 80% r.H.) condensate tank Approx. 13 liters Air volume level 1 / 2 290 / 550 m³/h (Night mode: 290 m³/h) Compressor Rotary compressor refrigerant R454C Dimensions (H x W x D) 845 x 452 x 538 mm Weight 41.8 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C 30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years
Fr. 3'330.00
Aerial Aerial AD750 Dehumidifier
The Aerial AD 750 is a very powerful, robustly built dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. The AD750 features a robust housing made of impact-resistant plastic, stable guide rails, and side wheels for easy mobility on the floor. The dryer can even be pulled over stairs with these wheels. However, when used as a construction site dehumidifier, attention should be paid to the weight; 2 people are required for relocating it between floors or construction scaffolding.The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Fan motor with winding protection.• Compressor: Fully hermetic rotary vane compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter drier. Service connection on the suction side.• Self-defrosting: Automatic hot gas defrost controlled by DryLogic.• Collection container: 12 liters, with automatic full level shut-off.• Hose connection: Fitting (15 mm) for direct condensate drainage.• Hygrostat: Hygrostat rotary knob• operating hour meter• 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing.• Stackable designsThere are two versions of the AD750: with a bucket without a pump or with a pump without a bucket. Please select the desired model. dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +32°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions: at 30°C / 80% r.H. = 55.0 liters / day (power consumption: 900 W)at 27°C / 60 % r.H. = 34.1 Liters / Day (Power consumption: 780 W)at 20°C / 60% r.H. = 24.5 liters / day (power consumption: 660 W)at 10°C / 70% r.H. = 14.0 Liters / Day (Power consumption: 560 W) Technical data Tension: 230V / 50Hz Power consumption: max. 900W (10A) / 660W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 53 dB(A) (manufacturer's specification) Dehumidification capacity: 55 liters/day (30°C / 80% r.H.) air circulation volume: 710 m³/h (measurement installed) condensate tank: approx. 12 liters Compressor: Rotary compressor refrigerant: R407c (550gr.) Dimensions (H/W/D): 88 x 52 x 49.5 cm Weight: 42 Kg Business closure: Hygrostatrad Ambient temperature: 3°C ~ 32°C (40 - 95% r.H.) Application area: up to 600m³ (temperature-controlled rooms) resp. 400m³ (unheated) Swiss plug: Yes hose connection: Yes Operating hour meter: Yes Guarantee: 2 years
Fr. 3'458.00
Aerial Aerial AD975 Dehumidifier with Pump
Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.Due to its high dehumidification performance, the AD-975 is equipped with a water pump as standard. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device. service The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required High service friendliness The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary. Features at a glance • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Standard equipped with pump set, no bucket• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Maintenance and service friendly dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 76 liters / 24h (Power consumption: 1070 W)20°C / 60% r.H. = 34.5 liters / 24h (Power consumption: 785 W)(r.H.=relative humidity) Technical data Tension 230V / 50Hz Power consumption 1070 W max. Sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% r.H.) water pump standard (no bucket), lift height 4 m Air volume level 1 / 2 750 / 900 m³/h (Night mode: 750 m³/h) Compressor Rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 48.3 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C 30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years
Fr. 3'813.00
Aerial Aerial AD995 Dehumidifier with Pump
Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.Due to its high dehumidification performance, the AD-995 is equipped with a water pump as standard. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device. service The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required High service friendliness The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary. Features at a glance • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Standard equipped with pump set, no bucket• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Maintenance and service friendly dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 95 liters / 24h (Power consumption: 1830 W)20°C / 60% r.H. = 46.5 liters / 24h (Power consumption: 1282 W)(r.H.=relative humidity) Technical data Tension 230V / 50Hz Power consumption 1900 W max. Sound pressure level 2.5 m distance 64 dB(A) dehumidification performance 76 liters/day (30°C / 80% r.H.) water pump standard (no bucket), lift height 4 m Air volume level 1 / 2 750 / 900 m³/h (Night mode: 750 m³/h) Compressor Rotary compressor refrigerant R454C Dimensions (H x W x D) 906 x 502 x 547 mm Weight 58.2 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C 30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m hose connection 15 mm hose inner diameter guarantee 2 years
Fr. 4'462.00
Aerial Aerial ASE300 Adsorption Dryer/035
The medium-sized ASE adsorption dryer from Aerial. Handy yet powerful, making it ideal for flexible use in drying water damage or for keeping rooms dry with permanent moisture exposure. The mobile adsorbers of this type are also suitable for industrial applications where low air humidity is required, for example in production facilities.Adsorption dryers have a practically constant dehumidification performance regardless of the room temperature. They are therefore also suitable for use in cold environments, even below freezing point. In principle, the air is passed through a continuously rotating sorption rotor, which is a wheel made of a very moisture-absorbent material. The moisture absorbed by the rotor is expelled from the device by a heated (PTC heating) air stream flowing in the opposite direction (= regeneration air) and must be vented out of the room. The dry air is directed into the room or through hoses to the areas that need to be dried.serviceThe operation is incredibly simple: plug it into the socket, turn on the device with the toggle switch, and set the desired humidity level on the hygrostat. Adjusting the air volumes is not necessary. Installation of the deviceThe dryer can optionally be placed outside the damp zone or in the room itself:Set up outside the damp area, the dry air is blown into the area to be dried using suitable hoses. The moist exhaust air either enters the room where the dryer is located or can also be discharged using hoses, for example, through a window to the outside. This setup is usually used for drying water damage in cavities, such as water damage under bathtubs or in water pits. When drying water damage in dense materials like underfloor drying, the dry air from the adsorption dryer is additionally pressurized with the help of compressors (e.g., with VP2-6 sound boxes from our range) and can thus be directed to hard-to-reach areas.The arrangement in the room itself is suitable when the entire air volume needs to be kept dry, usually in industrial or commercial applications. The dry air flows directly from the device into the room, while the moist exhaust air is led out of the room via a hose. Rotor ECODRY G3-MH / PTC Heating ElementThe high-performance rotor is optimized for maximum water intake under varying entry conditions. The mechanical strength of the rotor's surface is extremely high. Non-flammable. The rotor is maintenance-free and washable. Dynamic, safe, and self-regulating PTC heating element.Characteristics • Stackable, quiet, maintenance-friendly • Energy efficient through ecoDRY rotor • Precisely adjustable with built-in hygrostat • Cost and duration control through combination meter for• Operating hours and kWh • Robust stand device with foldable carrying handle • 4 rubber buffers (abrasion-resistant and non-staining) on the underside protect sensitive floor surfaces • Air intake: process and regeneration air together• with air filter and silencer • Housing: Stainless steel / powder-coated steel sheet • Connection cable 4.5 m with power plug • PTC heating elements for maximum operational safety • Optional with calibrated power meterAir Inlet: Common air inlet for process and regeneration air at the front Ø = 125 through silencer and air filter. Air outlet: Dry air: rear side, Ø = 80 mm or 2 x Ø 50 mm, regeneration air: rear side, Ø = 80 mm Technical data Tension 1 x 230V / 50 Hz Power consumption 1040W max. insurance 10A Sound pressure level 3 m distance 57 dB(A) dehumidification performance 25.70kg/Tag (20°C / 60% r.F.) Liters per kilowatt-hour = 1.05 l/kWh Kilowatt hour per liter = 0.97 kWh/l Airflow Process air volumes: 300m³/h Regeneration air volume: 110m³/h Weight 18 Kg dimension 37 x 33.5 x 43 cm (including stubs and stand feet) Ambient temperature -10°C ~ 35°C ambient humidity 10 to 100% RH control panel On/Off switch, built-in hygrostat in the Air intake side, kilowatt-hour meter Swiss plug Yes guarantee 2 years
Fr. 4'535.00
Dantherm Dantherm CDF40 Dehumidifier
The energy-efficient and quiet powerful dehumidifiers of the CDF series are ideal for preserving and protecting your valuables from moisture damage. They are suitable for regulating humidity in workshops, warehouses, museums, churches, archives, and waterworks. Important functions Modern Design Low noise level Low power consumption Integrated control of humidity and temperature BMS Communication (Modbus RTU) Built into a strong and robust powder-coated and galvanized sheet metal housing Evaporator and condenser coils epoxy-coated for maximum corrosion resistance Controls Integrated electronic hygrostat and thermostat Integrated ON/OFF control of humidity and temperature (electric or hot water heating register as an accessory) 230 V for control valve, exhaust fan, and pump/boiler RS485 for Modbus communication Suitable for Archiving and Storage Storage of classic cars commercial building emergency services Food and beverages Industry, factories and production cultural heritage Leisure and Recreation Defense and Aerospace museums and galleries Pharmacy and Science residential buildings Transport and Logistics Warehouses and Storage waterworks Technical data: Specifications units CDF 40 Operating temperature range °C
Fr. 5'949.00
Dantherm Dantherm CDF50 Dehumidifier
The energy-efficient and quiet powerful dehumidifiers of the CDF series are ideal for preserving and protecting your valuables from moisture damage. They are suitable for regulating humidity in workshops, warehouses, museums, churches, archives, and waterworks. Important functions Modern Design Low noise level Low power consumption Integrated control of humidity and temperature BMS Communication (Modbus RTU) Built into a strong and robust powder-coated and galvanized sheet metal housing Evaporator and condenser coils epoxy-coated for maximum corrosion resistance Controls Integrated electronic hygrostat and thermostat Integrated ON/OFF control of humidity and temperature (electric or hot water heating register as an accessory) 230 V for control valve, exhaust fan, and pump/boiler RS485 for Modbus communication Suitable for Archiving and Storage Storage of classic cars commercial building emergency services Food and beverages Industry, factories and production cultural heritage Leisure and Recreation Defense and Aerospace museums and galleries Pharmacy and Science residential buildings Transport and Logistics Warehouses and Storage waterworks Technical data Specifications units CDF 50 Operating temperature range °C
Fr. 6'896.00
Dantherm Dantherm CDF70 Dehumidifier
The energy-efficient and quiet powerful dehumidifiers of the CDF series are ideal for preserving and protecting your valuables from moisture damage. They are suitable for regulating humidity in workshops, warehouses, museums, churches, archives, and waterworks. Important functions Modern Design Low noise level Low power consumption Integrated control of humidity and temperature BMS Communication (Modbus RTU) Built into a strong and robust powder-coated and galvanized sheet metal housing Evaporator and condenser coils epoxy-coated for maximum corrosion resistance Controls Integrated electronic hygrostat and thermostat Integrated ON/OFF control of humidity and temperature (electric or hot water heating register as an accessory) 230 V for control valve, exhaust fan, and pump/boiler RS485 for Modbus communication Suitable for Archiving and Storage Storage of classic cars commercial building emergency services Food and beverages Industry, factories and production cultural heritage Leisure and Recreation Defense and Aerospace museums and galleries Pharmacy and Science residential buildings Transport and Logistics Warehouses and Storage waterworks Technical data Specifications units CDF 70 Operating temperature range °C
Fr. 9'189.00
Dantherm Dantherm TTR 5200 Adsorption Dryer
This maintenance-friendly adsorption dehumidifier with a large dry air volume is capable of extracting several hundred kilograms of water per day. The robust, corrosion-protected steel housing in galvanized and painted design withstands even the most adverse operating environments and is ideally suited for drying, gas dehumidification, or dry air generation in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering, but also for reducing ice and frost formation in deep-freeze zones or for protecting moisture-sensitive stored goods. "It is suitable, for example, for:" • Avoidance of corrosion damage due to condensate • Guaranteeing the best possible processing quality of moisture-sensitive stock goods • Ice-free maintenance of cooling zones • accelerated drying of your products Perfectly in Flow The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion. Flowmatic S reliably maintains the flow rate at the set point. The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times. High dry air performance even at low dew point The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures. TTR-Trisorp-Dual-Principle Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air. When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet. Series-integrated heat recovery (HR) A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points. Configurable Air Direction Reversal A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes. The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa. Wide range of applications Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example: • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls Value added without extra cost The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort: • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options. Possible additional options • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels Advantages at a Glance • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site. A notice: This device is available under the brands "Trotec" and "Dantherm". Technical data dry air Dehumidification at 20°C/60% r.H. 29.1 kg/Std. = 698.4 kg/Day Air volume blowing free 5800 m³/h nominal air volume 5200 m³/h external pressing 400 Pa connection inlet Ø 500 mm connection outlet Ø 500 mm regeneration air nominal air volume 1050 m³/h external pressing 300 Pa connection inlet Ø 300 mm connection outlet Ø 300 mm working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 60 A Installed capacity 40 kW heating capacity 36 kW recommended coverage 63A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1680 x 1110 x 1919 mm Weight 680 kg Country of production Germany Trotec article no. 1.110.000.182 guarantee 2 years
Fr. 40'493.00
Dantherm Dantherm TTR6600 Adsorption Dryer
This maintenance-friendly adsorption dehumidifier with a large dry air volume is capable of extracting several hundred kilograms of water per day. The robust, corrosion-protected steel housing in galvanized and painted design withstands even the most adverse operating environments and is ideally suited for drying, gas dehumidification, or dry air generation in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering, but also for reducing ice and frost formation in deep-freeze zones or for protecting moisture-sensitive stored goods. "It is suitable, for example, for:" • Avoidance of corrosion damage due to condensate • Guaranteeing the best possible processing quality of moisture-sensitive stock goods • Ice-free maintenance of cooling zones • accelerated drying of your products Perfectly in Flow The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion. Flowmatic S reliably maintains the flow rate at the set point. The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times. High dry air performance even at low dew point The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures. TTR-Trisorp-Dual-Principle Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air. When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet. Series-integrated heat recovery (HR) A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points. Configurable Air Direction Reversal A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes. The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa. Wide range of applications Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example: • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls Value added without extra cost The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort: • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options. Possible additional options • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels Advantages at a Glance • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site. A notice: This device is available under the brands "Trotec" and "Dantherm". Technical data dry air Dehumidification at 20°C/60% r.H. 37.2 kg/hour = 892.8 kg/day Air volume blowing free 7200 m³/h nominal air volume 6600 m³/h external pressing 400 Pa connection inlet Ø 500 mm connection outlet Ø 500 mm regeneration air nominal air volume 1330 m³/h external pressing 300 Pa connection inlet Ø 300 mm connection outlet Ø 300 mm working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 73.5 A Installed capacity 50.5 kW heating capacity 45 kW recommended coverage 100A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1680 x 1110 x 1919 mm Weight 720 kg Country of production Germany Trotec article no. 1.110.000.187 guarantee 2 years
Fr. 43'493.00
Dantherm Dantherm TTR8200 Adsorption Dryer
This maintenance-friendly adsorption dehumidifier with a large dry air volume is capable of extracting more than a thousand kilograms of water per day. The robust, corrosion-protected steel housing in galvanized and painted design withstands even the most adverse operating environments and is ideally suited for drying, gas dehumidification, or dry air generation in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering, but also for reducing ice and frost formation in deep-freeze zones or for protecting moisture-sensitive stored goods. "It is suitable, for example, for:" • Avoidance of corrosion damage due to condensate • Guaranteeing the best possible processing quality of moisture-sensitive stock goods • Ice-free maintenance of cooling zones • accelerated drying of your products Perfectly in Flow The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion. Flowmatic S reliably maintains the flow rate at the set point. The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times. High dry air performance even at low dew point The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures. TTR-Trisorp-Dual-Principle Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air. When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet. Series-integrated heat recovery (HR) A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points. Configurable Air Direction Reversal A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes. The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa. Wide range of applications Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example: • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls Value added without extra cost The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort: • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options. Possible additional options • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels Advantages at a Glance • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site. A notice: This device is available under the brands "Trotec" and "Dantherm". Technical data dry air Dehumidification at 20°C/60% r.H. 46.2 kg/Std. = 1108.8 kg/Day Air volume blowing free 9000 m³/h nominal air volume 8200 m³/h external pressing 400 Pa connection inlet Ø 500 mm connection outlet Ø 500 mm regeneration air nominal air volume 1660 m³/h external pressing 300 Pa connection inlet Ø 300 mm connection outlet Ø 300 mm working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 93.5 A Installed capacity 64.5 kW heating capacity 57 kW recommended coverage 125A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1680 x 1110 x 1919 mm Weight 750 kg Country of production Germany Trotec article no. 1.110.000.190 guarantee 2 years
Fr. 50'993.00
Dantherm Dantherm TTR10000 Adsorption Dryer
Extensively equipped adsorption dryer with an immense dehumidification capacity of 55 kg per hour. Optimal for very high dry air demand even in cool environments with low dew points. "It is suitable, for example, for:" • for the permanent drying of buildings • for gas dehumidification or dry air production in the chemical, pharmaceutical, and food industries as well as in mechanical engineering • to protect machines, inventory, and buildings from corrosion, condensation, or mold formation, for example in water engineering facilities or electrical control centers. Perfectly in Flow The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion. Flowmatic S reliably maintains the flow rate at the set point. The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times. High dry air performance even at low dew point The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures. TTR-Trisorp-Dual-Principle Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air. When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet. Series-integrated heat recovery (HR) A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points. Configurable Air Direction Reversal A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes. The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa. Wide range of applications Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example: • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls Value added without extra cost The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort: • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options. Possible additional options • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels Advantages at a Glance • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site. A notice: This device is available under the brands "Trotec" and "Dantherm". Technical data dry air Dehumidification at 20°C/60% r.H. 55.1 kg/Std. = 1322.4 kg/Day Air volume blowing free 10'500 m³/h nominal air volume 9680 m³/h external pressing 300 Pa connection inlet Ø 700 mm connection outlet Ø 700 mm regeneration air nominal air volume 1970 m³/h external pressing 300 Pa connection inlet Ø 400 mm connection outlet Ø 400 mm working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 108 A Installed capacity 74 kW heating capacity 66 kW recommended coverage 160A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1802 x 1460 x 2032 mm Weight 900 kg Country of production Germany Trotec article no. 1.110.000.192 guarantee 2 years
Fr. 58'493.00
Dantherm Dantherm TTR12000 Adsorption Dryer
Extensively equipped adsorption dryer with an immense dehumidification capacity of 66.5 kg per hour. Optimal for very high dry air demand even in cool environments with low dew points. "It is suitable, for example, for:" • for the permanent drying of buildings • for gas dehumidification or dry air production in the chemical, pharmaceutical, and food industries as well as in mechanical engineering • to protect machines, inventory, and buildings from corrosion, condensation, or mold formation, for example in water engineering facilities or electrical control centers. Perfectly in Flow The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion. Flowmatic S reliably maintains the flow rate at the set point. The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times. High dry air performance even at low dew point The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures. TTR-Trisorp-Dual-Principle Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air. When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet. Series-integrated heat recovery (HR) A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points. Configurable Air Direction Reversal A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes. The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa. Wide range of applications Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example: • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls Value added without extra cost The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort: • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options. Possible additional options • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels Advantages at a Glance • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site. A notice: This device is available under the brands "Trotec" and "Dantherm". Technical data dry air Dehumidification at 20°C/60% r.H. 66.5 kg/Std. = 1596 kg/Day Air volume blowing free 12'500 m³/h nominal air volume 11'800 m³/h external pressing 300 Pa connection inlet Ø 700 mm connection outlet Ø 700 mm regeneration air nominal air volume 2380 m³/h external pressing 300 Pa connection inlet Ø 400 mm connection outlet Ø 400 mm working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 129 A Installed capacity 89 kW heating capacity 81 kW recommended coverage 160A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1802 x 1460 x 2032 mm Weight 1000 kg Country of production Germany Trotec article no. 1.110.000.195 guarantee 2 years
Fr. 65'243.00
Dantherm Dantherm TTR13500 Adsorption Dryer
Extensively equipped adsorption dryer with an immense dehumidification capacity of 74.6 kg per hour. Optimal for very high dry air demand even in cool environments with low dew points. "It is suitable, for example, for:" • for the permanent drying of buildings • for gas dehumidification or dry air production in the chemical, pharmaceutical, and food industries as well as in mechanical engineering • to protect machines, inventory, and buildings from corrosion, condensation, or mold formation, for example in water engineering facilities or electrical control centers. Perfectly in Flow The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion. Flowmatic S reliably maintains the flow rate at the set point. The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times. High dry air performance even at low dew point The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures. TTR-Trisorp-Dual-Principle Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air. When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet. Series-integrated heat recovery (HR) A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points. Configurable Air Direction Reversal A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes. The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa. Wide range of applications Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example: • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls Value added without extra cost The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort: • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options. Possible additional options • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels Advantages at a Glance • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site. A notice: This device is available under the brands "Trotec" and "Dantherm". Technical data dry air Dehumidification at 20°C/60% r.H. 74.6 kg/Std. = 1790.4 kg/Tag Air volume blowing free 14'700 m³/h nominal air volume 13'300 m³/h external pressing 400 Pa connection inlet Ø 700 mm connection outlet Ø 700 mm regeneration air nominal air volume 2670 m³/h external pressing 200 Pa connection inlet Ø 400 mm connection outlet Ø 400 mm working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 150A Installed capacity 103 kW heating capacity 90 kW recommended coverage 250A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1802 x 1460 x 2032 mm Weight 1000 kg Country of production Germany Trotec article no. 1.110.000.197 guarantee 2 years
Fr. 72'743.00