A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs.   The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.)  Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H / W / D):      690 x 390 x 470 mm Weight:    32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-955 features both a 13-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 53 liters / 24h (Power consumption: 830 W)20°C / 60% r.H. = 22.5 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 830 W max. Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     53 liters/day (30°C / 80% r.H.)  condensate tank Approx. 13 liters   Air volume level 1 / 2 290 / 550 m³/h (Night mode: 290 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   845 x 452 x 538 mm   Weight 41.8 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

TTK 900 MP – Professional Construction Dryer for Demanding Applications High-performance construction dryer for commercial use and water damage restoration. Featuring VarioDry technology, two-point hot gas defrosting, and environmentally friendly R-454C refrigerant. The TTK 900 MP is a professional construction dryer developed for extremely demanding applications. Its robust construction and high-quality components ensure consistently high dehumidification performance and lasting value. A powerful rotary compressor combined with a high-pressure radial fan provides maximum dehumidification capacity – even at low ambient temperatures. Thanks to dual-sided dry air discharge, the radial fan distributes the dehumidified air evenly throughout the room without back pressure, enabling extremely fast drying of large areas. A true highlight is the innovative VarioDry technology: It allows the device to be optimally adapted to the respective application environment via a switch – either for efficient new building drying or targeted water damage restoration. Features: 10% more power with 10% less energy consumption (vs. TTK 800) VarioDry technology for new building drying & water damage Two-point hot gas defrosting via bypass process High-pressure radial fan with dual-sided air discharge Climate-friendly R-454C refrigerant (GWP < 150) Encapsulated, modular electronics with plug connections Robust metal housing & adjustable push handle Transportable standing and lying down, as well as stackable Integrated operating hours counter Prepared for external hygrostat & pump connection Efficiency, Mobility & Sustainability Maximum drying efficiency is ensured by the two-point hot gas defrosting via bypass process, which drastically shortens defrosting times and extends active drying cycles – ideal for unheated construction sites. With an excellent energy coefficient, the TTK 900 MP achieves outstanding dehumidification performance per kilowatt. The device also sets standards in terms of service: The metal casing can be quickly removed thanks to the innovative central chassis. The encapsulated electronics are modular and pluggable, allowing for easy replacement of components directly on site. Dehumidification Performance 30 °C / 80 % RH: 96.0 Liters / 24h 20 °C / 60 % RH: 49.0 Liters / 24h Technical Specifications Voltage / Mains Connection 220–240 V / 50 Hz (incl. CEE 7/7 with Swiss fixed adapter) Power Consumption 2.1 kW (Rated current draw: 9.8 A / Fuse protection: 16 A) Max. Dehumidification Performance up to 96 Liters / 24h (at 30 °C / 80 % RH) Air Volume (Level 1 / Level 2) 600 / 850 m³/h Recommended Room Size (Construction Drying) 240 m² / 600 m³ Recommended Room Size (Dehumidification) 360 m² / 900 m³ Operating Temperature Range 3 °C to 40 °C Operating Humidity Range 25 % to 90 % RH Sound Level (at 3 m distance) 59 dB(A) Fan / Blower Levels Radial fan (2 levels) Compressor Rotary compressor Automatic Defrosting Two-point hot gas defrosting (bypass process) Refrigerant R454C (900 g / GWP factor: 146 / CO2 equivalent: 0.13 t) Condensate Drain Hose connection (recommended hose: 16 mm, included in delivery) Housing & Storability Metal housing, stackable, adjustable handle bar, non-marking wheels Dimensions without packaging (L × W × H) 500 × 565 × 960 mm Weight 69 kg (without packaging) / 72 kg (with packaging) Scope of Delivery Air filter, condensate hose

Learn more More Fewer