The three-stage adjustable turbo engine reaches up to 20000 rpm and guarantees maximum efficiency at every power level, as the current volumetric flow rate in m³ is continuously monitored thanks to the integrated automation, and the power is automatically adjusted to the optimal air throughput.   A single press of a button is enough, and the device switches either to a higher power class or, if needed, to the additionally available whisper mode:     Performance levels   Performance level 1: suitable for areas up to approx. 30 m² at overpressure / 25 m² at underpressure, motor power: 0.5 kWPerformance level 2: suitable for areas up to approx. 60 m² at overpressure / 50 m² at underpressure, motor power: 0.8 kW Performance level 3: suitable for areas up to approx. 90 m² at overpressure / 70 m² at underpressure, motor power: 1.2 kW   Comparison with predecessor models based on side channel blower technology: Performance level 1: Corresponds to the performance of a 0.8 kW side channel blowerPerformance level 2: approximately 10% stronger than a side channel blower with 1.1 to 1.3 kW powerPerformance level 3: Corresponds to 140% of the performance of a 1.1 kW to 1.3 kW side channel blower and 80% of the performance of a 3 kW side channel blower. The wear-free touch control panel of this new insulation layer dryer allows for convenient operation at the touch of a finger. No controls, no wear.   With the help of the new whisper mode, the sound level of the unit can be reduced for 10 hours, yet the device operates as efficiently as usual. "Furthermore, it has an interface for data exchange with the latest generation of our drying unit DA 4 M. The connection of both units enables networking of all device data, including real-time remote monitoring of system status and drying progress." The multifunction display not only clearly shows the current operating status and volumetric flow rate - even in the dark or from a distance - as a plain text display, but additionally, the color of the display lighting automatically indicates how effectively the drying air can flow through the insulation layer in your installation.     Performance-optimized energy consumption through HiDry automation   In contrast to conventional compressor turbines, the VX turbo engines have power and energy consumption always in a direct linear relationship. When the power is reduced, the energy consumption is also reduced. Furthermore, the power control is not resistance-oriented, but is focused on the required volumetric flow rate. Thanks to this technology, VX units operate at a particularly energy-saving eco rate compared to turbine compressors, especially in the drying final phase.     Advantages at a Glance   • Unique adaptive power control - makes thinking in device classes practically unnecessary• Replaces all side channel blowers in the power classes from 0.8 kW to 3 kW• Super lightweight - only 10 kg• 35 % lighter than comparable competitive models• Up to 75% lighter than side channel blowers of the same performance class• DA-4 interface for networking all device data including real-time remote monitoring of system status and drying progress• Optiflow-NT multifunction display with clear text status display and performance control color lighting• Digital counter for operating hours and energy consumption• Whisper mode for very quiet night operation• Wear-free touch control panel • HotStop System• Service socket for dehumidifier (EU socket!)• Cable receiver with lockable plug• Clear text status display• Protection-enhanced control elements• Maintenance quick-release fasteners       scope of delivery   device with • 2x connection fittings for 38 mm hoses • Filter sieve for drying in overpressure process • 2x VX-Microfilter element fine dust filter class F8     Important   • The four-way splitter visible in the product image is not included in the scope of delivery • The blue socket on the device corresponds to a EU socket. Only 2-pole plugs fit Swiss devices.      Technical data   Recommended room size overpressure 90 m² negative pressure 70 m² max. overpressure 270 mbar max. negative pressure 220 mbar Air volume blowing free 250 m³/h Defined volumetric flow rate-  optimum (aspirating)       Stage Whisper Mode: 100 m³/h Level 1: 100 m³/h Level 2: 150 m³/h Level 3: 180 m³/h Level 4: 250 m³/h power connection 230 V / 50 Hz rated current consumption max. 5.5 A Power consumption max. 1200W Cable length approx. 3.5 m Plug EU plug with Swiss adapter Dimensions W x H x D 430 x 415 x 420 mm Weight 10 kg Trotec article no. 1.560.000.042 guarantee 2 years

Learn more More Fewer

Modern insulation layer dryers are indeed optimally soundproofed, but due to their function, they produce turbine-like noises that are often perceived as disturbing by residents. This silencer can be easily integrated into the drying system and significantly reduces operational noise. "Extensive practical tests have shown significant sound reductions when using insulation layer drying units from leading manufacturers. This universally applicable module is particularly suitable for use with Trotec insulation layer drying units and offers even more sound reduction without back pressure."  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  Advantages at a Glance • Sound reduction between 14 and 19 dB(A) possible• No loss of performance and no back pressure• Compatible with many common insulation layer drying units• Universally applicable for 38 mm and 50 mm hoses• For compressor operation in underpressure and overpressure processes• Specifically designed for flexible and stable stack installation "in one piece" with MultiQube system components.• 100% recyclebar  Technical data  sound reduction 14 - 19 dB(A) air hose connections  2 nozzles of 38 mm each (optional rubber adapter available in 50 mm) Masse (L x B x H) 378 x 378 x 132 mm Weight 3.4 kg Trotec article no. 6.100.000.120 guarantee 2 years

Learn more More Fewer

A compact, affordable device for quick and reliable measurements of various noise sources within a measurement range of 40 to 130 dB(A). Additionally, minimum and maximum values can be displayed.   "For use in windy outdoor environments, an attachable wind shield is included in the delivery, which suppresses disturbing wind noise. This ensures that the measurement values are not affected."   An integrated sensor continuously monitors the ambient light and automatically turns on the display backlight in low light conditions.     Wide range of applications   The successful combination of innovative features, ergonomic design, and affordable price makes this precision instrument suitable for a variety of applications. For example, for noise and sound measurement in the office, during leisure time, in machine inspections, in private living environments, on construction sites, traffic noise, compliance with music volume, and much more.   It can also be used for quality control in the construction trade, for example, to detect noise sources or poorly executed insulation. Often, the disturbing noises are transmitted through the ventilation system or other supply shafts.     Advantages at a Glance • Measures sound quickly and reliably• Optimal price-performance ratio• Minimal value, maximal value, and hold function• Sensor-controlled display lighting in low light conditions• Simple one-handed operation• Very short response time• Tripod thread• Practice-oriented German industrial design - protected design pattern     scope of delivery   • measuring device • Battery• Wind protection• User manual     Technical data  Sensory Schall dB(A) sound measuring range  40 - 130 dB(A) accuracy ±3.5 dB(A) (at 1 kHz and 94 dB(A)) resolution 0.1 dB(A) response time 0.125 seconds frequency range 31.5 Hz - 8 kHz Power supply 9V Block-Batterie operating time > 30 Std. Weight 135 g Masse (H x B x T) 132 x 56 x 33 mm Vicinity: temperature humidity 0 - 40 °C 10 - 75 % r.H. (non-condensing) Trotec article no. 3.510.205.051 guarantee 2 years

Learn more More Fewer

A precise measuring device for quick control and monitoring of environmental noise, workplace noise, and in private surroundings. Measures sound sources within a measurement range of 30 to 130 dB(A). Additionally, minimum and maximum values can be displayed and stored.   This easy-to-handle sound level meter combines modern electrodynamic transducer technology in a compact design. As a sound level meter according to accuracy class 2, the device is ideally suited for the documentation of machine and environmental noise, as well as workplace and noise hazard measurements.   The large four-digit measurement display with additional bar graph representation is easy to read in any environment thanks to the LCD backlighting.   With A- and C-frequency weighting, fast-slow time weighting, and many other practical features, this measuring device from the Multi-Measure Professional series represents the perfect solution for demanding sound level measurements.   Compact format, lightweight, and button layout optimized for one-handed operation.      Versatile application, for example   • Noise hazard measurements for occupational safety• Environmental protection operations for the determination of ambient noise• Determination of noise areas for noise reduction programs in companies• Control and selection of hearing protection devices• Compliance monitoring of noise protection regulations• Control measurements in climate and heating technology     Advantages at a Glance   • Corresponds to accuracy class 2• Frequency assessment according to characteristic A and C• Maximal and Minimal Value Storage• Storage for 50 measurement values• Switchable time evaluation (Fast?/?Slow)• Display lighting• BarGraph display• 1/4-inch tripod thread     scope of delivery   • measuring device • Battery• Wind protection • Carrying case• User manual     Technical data  Sensory Sound dB(A) + Sound dB(C) sound measuring range  30 - 130 dB(A) sub-measuring ranges 30...80 dB, 50...100 dB, 80...130 dB, 30...130 (auto) dB(A) accuracy Class 2 according to DIN EN 61.672 resolution 0.1 dB(A) response time 0.5 seconds frequency range 31.5 Hz - 8 kHz dynamic range 50 dB data storage 50 measured values Power supply 9V Block-Batterie operating time > 30 Std. Weight 230 g Masse (H x B x T) 210 x 55 x 32 mm Vicinity: temperature humidity 0 - 40 °C 10 - 90 % r.H. (non-condensing) Trotec article no. 3.510.005.010 guarantee 2 years

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.410

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.420

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.425

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.430

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.460

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.470

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.475

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.480

Learn more More Fewer