The "Superelastic-Flextract" is a highly developed hose made of two layers of PVC and reinforced with an integrated spring steel spiral as well as axial and radial thread reinforcement. This construction gives it exceptional robustness and flexibility. The smooth inner surface minimizes flow resistance and facilitates the passage of materials. Additionally, the hose is vacuum-resistant, tensile-resistant, and has excellent chemical resistance. Its ability to handle even the smallest bending radii makes it an ideal solution for demanding applications in confined environments.   Packaging unit: 15m Technical dataUV and ozone resistantCadmiumfrei0 to 85 °CDiameter 38 mm and 50 mm. 

Learn more More Fewer

The "PVC Flextract Hose" is a highly robust and flexible hose made of two layers of PVC, reinforced with an inserted spring steel spiral as well as axial and radial thread reinforcement. The smooth inner surface of the hose ensures a smooth flow, while its extreme flexibility and vacuum resistance allow for a variety of applications. Additionally, the hose is tensile, has good chemical resistance, and can be easily installed in tight spaces due to its small bending radii.Packaging unit: 15m Technical DataUV and ozone resistant Cadmiumfrei0 to 85 °CInner diameter: 50 mm

Learn more More Fewer

"The edge area of the floor can be dried gently and efficiently using the edge joint nozzle. This means that no drilling needs to be done in the floor, thus preserving the surface covering. Suitable for 38 mm hose systems." Technical dataSuitable for hose inner diameter: 38 mm 50mm

Learn more More Fewer

The Bora 208 from Roth-Kippe is an affordable, well-thought-out dryer for families with children and for households that do not want to dry all their laundry in the tumbler. It dries about 2-3 loads of laundry per day and is available as "Bora208" (without switchable heating) or "Bora208H" (with switchable heating). In the version with heating, the room can be heated to 18°C at the push of a button in cooler environments. In rooms that maintain 18°C or more year-round, the version with heating offers no advantage.service The Bora features a clear, digital control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically on the Bora: By repeatedly pressing the program button, the start time can be postponed in half-hour increments. This means that you can hang up the laundry during the day, but shift the drying time to the period of the lower electricity tariff.Switchable heating:For a small additional fee, the device is also available as "Bora 208 H". The switchable 1000W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5m in length, which can certainly have a width of 2m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70m from the top edge of the device.Selectable fan levels: The Boras have a fan level, so on or off.Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry runs off through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever be exhausted, suitable replacement filter mats can be ordered from us at any time.Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.  Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland. With this, the dryer can be started with a delay if desired, allowing the low-tariff electricity to be fully utilized. This applies both to laundry drying and to the general stabilization of excessive basement humidity. Furthermore, daily blocking times or an automatic, time-limited room drying program - for example, restricted to nighttime hours - can be programmed (limited to a maximum of 99 days each). The device counts the operating hours and reminds you with a light after 300 hours that the filter should be cleaned. By pressing the reset button for 5 seconds, the counter is reset and starts anew."Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting The assembly is very simple, just like with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:- the plug-and-play device- Carrier rail with screws/anchors- Hose connection coupling- 2m condensate drain hose- User manual "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no drainage is available, we recommend the chassis 'Dryfix-Mobil' with integrated bucket or the suitable chassis from Roth-Kippe."  Technical data  drying room: up to 15 m² Drying performance: 1.49 Kg/h Consumption per kg of laundry:   0.31 kWh Energy efficiency: A1 Tension: 230V / 50Hz Examples of dehumidification performance and consumption: Power consumption max. 515W, with heating switched on: +1000W = total 1515W (only 208H) at 20°C / 80% r.H. 22.9 L/24h (Power consumption: 450 W) at 26°C / 80% r.H. 27.5 L/24h (Power consumption: 495 W) Sound pressure level: 1 m distance 70 dB(A) 2.5 m distance 67 dB(A) (our measurement) air circulation volume: 770 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes hose connection: Yes Guarantee: 3 years                                               Training video for assembly:    Training video on changing the moisture value:  Training video for changing the display language:  Training video for setting the time:

Learn more More Fewer

The 408 is the ideal solution for households looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of two to three loads of laundry per day, making it perfectly suited to the needs of smaller households. Please note that the model offered here does not have a switchable heating function. As the successor to the proven "Bora 208", the 408 continues to impress with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 408 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 408 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 15 - 18 m² Drying performance: 1.45 - 1.89 kg/h depending on fan speed Consumption per kg of laundry:   0.25 - 0.31 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.41 kW with heating switched on ("H" models): 1.41 kW Sound pressure level: Fan level 1: 45 dB(A) Fan level 3: 66 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 38 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 408H is the ideal solution for households looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of two to three loads of laundry per day, making it perfectly suited to the needs of smaller households. Unlike the model 408, the 408H features an optional heating function that further accelerates the drying process when needed. As the successor to the proven "Bora 208H", the 408H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 408H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 15 - 18 m² Drying performance: 1.45 - 1.89 kg/h depending on fan speed Consumption per kg of laundry:   0.25 - 0.31 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.41 kW with heating switched on ("H" models): 1.41 kW Sound pressure level: Fan level 1: 45 dB(A) Fan level 3: 66 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 38 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer