This heat-resistant hot air hose made of durable black nylon with an integrated metal spiral is the ideal solution for demanding hot air applications. To ensure safe and efficient installation, the use of the appropriate adapter ring is essential. This warm air hose has been specifically designed for compatibility with the Master heaters BV 110 and BV 170, thus enabling optimal performance and reliability in conjunction with these heating devices.Technical data Long 7.6m diameter 340mm Operating temperature -10°C to +150°C Weight 16 Kg flexibility Highly flexible, angles of 180° or even circles in a small space are not a problem. Color Black Master Article No. 4515.367

Learn more More Fewer

This heat-resistant hot air hose made of durable black nylon with an integrated metal spiral is the ideal solution for demanding hot air applications. To ensure safe and efficient installation, the use of the appropriate adapter ring is essential. This warm air hose has been specifically designed for compatibility with the following heating systems: the warm air discharge heater BV290 and the air return set for the models BV290 and BV400. It thus enables optimal performance and reliability in conjunction with these heating devices.Technical data Long 7.6m diameter 410mm Operating temperature -10°C to +150°C Weight 15 Kg flexibility Highly flexible, angles of 180° or even circles in a small space are no problem. Color Black Master Article No. 4515.361

Learn more More Fewer

This very reliable and powerful pump with a check valve can be used freestanding or directly built into the device. Additionally, wall mounting of the pump is possible, as there are two brackets on the back with which the pump can be attached to two screws on the wall.   The pump is suitable for condensate water, but not for dirty water. The water can be supplied to the pump via a maximum of 3 inlets and is pumped away through a thin 3/8-inch (10 mm) connection via a hose up to a maximum height of 4 meters (the hose is not included in the delivery). The pump comes with a cable with a three-pole Swiss plug (230V).   The check valve of the pump prevents the backflow of water from the outgoing hose. The condensate pump has a float that only activates the device when water has accumulated. It can therefore also be used when water is not continuously flowing in. There is also the possibility to connect the pump to the electrical circuit of a dehumidifier (construction dryer), so that the dehumidifier would turn off in the event of a pump failure (these works must be carried out by an electrician).     Examples of funding performance At 0 m height: 360 liters per hourAt 2 m height: 240 liters per hourAt 4 m height: 192 liters per hour     Characteristics   • Check valve• Three (3) inlet openings• Easy installation• Overheat protection• Very quiet operating mode• Stossfester Tank• Compact design   Technical data  Voltage 220 - 240 V/50 Hz Power consumption 85 W (only during pumping process, otherwise no standby consumption) cable + plug Connection cable with Swiss plug T12 Masse H x B x L 185 x 135 x 285 mm Ambient temperature +1 °C to +50 °C Overheating protection at 130 °C Tank capacity  1.8 Liter flow rate depending on the funding amount max. 360 liters / hour guarantee 2 years

Learn more More Fewer

This power distributor records the energy consumption of up to four connected devices using a calibrated energy meter (MID). It was designed to fit the Aerial Aercube drying system and can thus be integrated stacked on it. The CC 4 MID box has been developed for use in construction and water damage drying, offering numerous advantages. The version available for order here is a special version for Switzerland with suitable, standard plugs T12 and sockets T13 (10A).  Features and Benefits   • Extremely robust housing• Protection class IP 44 • Calibrated MID-compliant energy meter• 16 A fuse• residual current device• Number lock included• After installation, there is no access to the internal• More stack sockets possible• Connection of max. 4 consumers• Integrated cable guides in the housing• 4.5 m cable length• Site-compatible power cableFor drying companiesAvailable in your desired color and with your logo upon request.All AERCUBE system components are 100% compatible and stackable with each other.

Learn more More Fewer

Splitgerät mit sehr hoher Kühlleistung – Die perfekte Klimatisierung für heisse Tage Wenn draussen die Temperaturen steigen, sorgt das Mobile Splitgerät PAC 4600 im Innenraum für angenehme Frische. Mit einer Kühlleistung von 4,3 kW, intelligenter Technik und kompakter Bauform ist dieses Split-Klimagerät mit sehr hoher Kühlleistung die ideale Wahl für Wohnungen, Büros oder Hotelzimmer bis 120 m³ Raumvolumen. Effiziente Kühlung – leise, leistungsstark, energiesparendDas Splitgerät PAC 4600 überzeugt nicht nur durch seine beeindruckende Kühlkraft, sondern auch durch seine Energieeffizienzklasse B. Dank des intelligenten Thermostats schaltet sich der Kompressor automatisch ab, sobald die gewünschte Raumtemperatur erreicht ist – das spart Strom und schont den Geldbeutel. Komfort auf KnopfdruckOb manuell in drei Stufen oder vollautomatisch: Die Klimaanlage lässt sich individuell auf Ihre Bedürfnisse einstellen. Die Swing-Funktion verteilt die kühle Luft gleichmässig im Raum, während der integrierte Timer für eine punktgenaue Klimatisierung sorgt – perfekt für Schlaf- oder Arbeitszeiten. Bedienen lässt sich das Gerät bequem per IR-Fernbedienung. Mehr als nur KühlenMit einer maximalen Luftleistung von 550 m³/h und einem vierstufigen Ventilator bringt das Trotec PAC 4600 auch ohne Kühlmodus frischen Wind in Ihre Räume. Der integrierte Luftfilter entfernt Staub, Flusen und Tierhaare – für ein spürbar besseres Raumklima. Platzsparend und mobil Dank der kompakten Bauweise, praktischen Griffmulden und leichtgängigen Rollen lässt sich das Splitgerät problemlos von Raum zu Raum bewegen. Die Ausseneinheit ist bereits für eine optionale Wandmontage vorbereitet – für maximale Flexibilität beim Einsatz. Ihre Vorteile auf einen Blick: Splitgerät mit sehr hoher Kühlleistung: 4,3 kW Bis zu 50 % effizienter als Monoblock-Geräte Geeignet für Räume bis 120 m³ Swing-Funktion für optimale Luftverteilung 550 m³/h Luftleistung Programmierbarer 24-Stunden-Timer Integrierter Luftfilter – leicht zu reinigen Vier Ventilationsstufen + Automatikmodus Kompakte Bauform, geringer Platzbedarf IR-Fernbedienung und digitale Anzeige Fazit: Das Trotec PAC 4600 Splitgerät mit sehr hoher Kühlleistung bietet maximale Leistung bei minimalem Energieverbrauch – eine smarte Investition für heisse Sommertage. Jetzt entdecken und durchatmen! Technische Daten Funktionen Kühlen, Entfeuchten, Lüften Energieklasse A+++ bis D Kälteleistung 4300 W / 14500 BTU/h Verbrauch Kühlmodus 1300 W Heizleistung 3500 W / 13000 BTU/h Verbrauch Heizmodus 1100 W Geeignet für Räume bis 48 m² Luftvolumen max. 550 m³/h Ventilatorstufen 4-stufig Wählbarer Temperaturbereich 16 - 30°C Verbindungsleitung Ausseneinheit 3 m (Nutzlänge 2.3 m) Kältemittel R32 Netzanschluss 230 V / 50 Hz Versandgewicht 38 kg Masse (H x B x T) 695 x 470 x 335 mm Geräuschpegel (Unsere Messung) 1,0 m Entfernung Lüfterstufe 1/2/3: 45/48/54 dB(A) Garantie 2 Jahre

Learn more More Fewer

Mobiles Raumklimagerät zum Kühlen und Heizen Dieses 4-in-1-Klimagerät bietet effiziente Kühlung von Büro und Räumen bis 34 m² und macht das Arbeiten und Wohnen angenehmer. Neben dem reinen Kühlbetrieb ist auch eine Heiz-, Entfeuchtungs- und Ventilationsfunktion vorhanden. Effiziente Kühlung und Thermostat Beim Erreichen der vorgewählten Zieltemperatur (in 1 °-Schritten einstellbar zwischen 16-31 °C) schaltet das integrierte Thermostat den Kompressor im Gerät aus, die Ventilation läuft wie bei allen Klimageräten dieser Art weiter, damit die genaue Raumtemperatur ermittelt werden kann. Der Kühlbetrieb wird beim Überschreiten der Zieltemperatur automatisch wieder aktiviert. Im Heizbetrieb schaltet sich die Heizung sinngemäss zu, sobald die gewählte Temperatur unterschritten wird. Komfort-Funktionen zum Wohlfühlen Zwei Ventilatorstufen sowie die variabel einstellbare Ausblasrichtung sorgen für die optimale Verteilung des Luftstroms. Im Zusammenspiel mit dem integrierten 24-Stunden-Timer können Stromkosten eingespart werden, da dieser die zeitgesteuerte An- und Abschaltung des Gerätes ermöglicht. Gleichzeitige Entfeuchtung der Raumluft Im Sommer ist nicht nur die Hitze, sondern oftmals auch eine zu hohe Luftfeuchtigkeit unangenehm. Während dem Kühlvorgang entzieht dieses Klimagerät der Luft bis 0.8 Liter Wasser pro Stunde, was das Raumklima viel angenehmer macht. Zusätzlich beugt die integrierte Luftentfeuchtungsfunktion auch ungesunder Schimmelbildung vor. Das Wasser wird über den Abluftschlauch verdampft. Installation und Wartung Das Klimagerät ist mit wenigen Handgriffen aufgebaut und sofort einsatzbereit. Der vormontierte Luftfilter reinigt die Raumluft von Flusen, Staub sowie Tierhaaren und lässt sich einfach herausnehmen und säubern. Propan (R290) als umweltfreundliches Kältemittel Dieses Klimagerät leistet mit der Verwendung von Propan (R290) einen wertvollen Beitrag zum Klimaschutz. Propan hat weder Ozonabbaupotential (ODP=0) noch einen nennenswerten Treibhauseffekt (GWP=3) und ist zudem besonders energieeffizient. Vorteile im Überblick Energieeffizienzklasse A 2.6 kW Kühl- oder Heizleistung Vier Betriebsmodi: Kühlung, Heizung, Ventilation, Entfeuchtung Zwei Ventilationsstufen Timer-Funktion Praktisches LED-Display und IR-Fernbedienung Herausnehmbarer Luftfilter Betriebsgeräusch je nach Lüfterstufe 56-58 dB(A) in 2.5 m Abstand  Warum braucht es einen Abluftschlauch? Professionelle Heimklimageräte sind Kompressionskälteanlagen, die Kälte und Wärme erzeugen. Die erzeugte Wärme muss nach draussen geleitet werden, um sich nicht mit der gekühlten Raumluft zu vermischen. Hierzu dient zwingend ein Abluftschlauch, der deshalb fester Lieferbestandteil jedes Monoblock-Klimagerätes ist. Technische Daten Kühlkapazität max. 2.6 kW (9000 Btu/h) Empfehlung Raumgrösse max. 34 m² resp. 85 m³ Wählbare Raumtemperatur 16 - 31 °C Entfeuchtungsleistung 0.8 Liter / h Netzanschluss 220 - 240 V, 50 Hz Nennstromaufnahme 4.1 A kühlen, 4.0 A heizen Kältemittel R290 (160g) Betriebsgeräuschje nach Lüfterstufe in 1 m Abstand 59-61 dB(A)in 2.5 m Abstand 56-59 dB(A) Abluftschlauch Ø 148 mm, Länge 1.5 m Masse (H x B x T) 690 x 330 x 290 mm Gewicht 19.1 kg Garantie 2 Jahre

Learn more More Fewer

Trotec PAC 3910 X – Starkes Klimagerät zur Kühlung von grösseren Räumen Ein vielseitiges Klimagerät, das Kühl-, Entfeuchtungs- und Ventilationsfunktionen in einem kompakten und mobil einsetzbaren System vereint. Mit einer Kühlleistung von 4.1 kW eignet es sich hervorragend für mittlere bis grössere Räume und schafft selbst an heißen Sommertagen ein spürbar angenehmes Raumklima. Funktionen, die überzeugen 3-in-1-Klimatisierung: Kühlung, Luftentfeuchtung und Ventilation – flexibel wählbar App-Steuerung via Wi-Fi für einfache Bedienung per Smartphone Follow-Me-Funktion: Die Temperatur wird dort gemessen, wo Sie sich befinden – für punktgenaue Klimatisierung Automatikmodus & Timer: Effiziente Steuerung ohne manuelles Eingreifen Nachtmodus: Reduzierte Lautstärke für störfreien Schlaf Schwenkfunktion (Swing) für gleichmässige Luftverteilung im Raum LED-Display & IR-Fernbedienung für komfortable Bedienung aus der Ferne Technische Merkmale im Überblick Artikelnummer 1210002133 Kühlleistung max. 4,1 kW / 14.000 Btu/h Raumgröße empfohlen bis 52 m² / 130 m³ Luftumwälzung max. 425 m³/h Entfeuchtungskapazität bis zu 3.75 l/h Betriebstemperatur 17–35 °C Geräuschpegel 52.3–53.6 dB(A) in 1 m Abstand Gebläsestufen 3 Energieeffizienz Klasse A Kältemittel R290 (230 g, umweltfreundlich) Stromanschluss 220–240 V / 50 Hz Leistungsaufnahme max. 1.6 kW Stecker EU-Stecker mit Schweizer Fixadapter Kabellänge 2.1 m Garantie 2 Jahre Design & Handhabung Kompakte Masse: 467 × 397 × 765 mm (L × B × H) Gewicht: 34 kg Mobil einsetzbar dank Transportrollen und Tragegriff Abluftschlauch: 1.5 m Länge – leicht über Fenster oder Tür zu führen Aufstellfläche: ab 12 m², mit mindestens 30 cm Abstand zur Wand Im Lieferumfang enthalten PAC 3910 X Klimagerät Abluftschlauch & Schlauchadapter Adapter zur Wandmontage Kondensatschlauch Luftfilter IR-Fernbedienung

Learn more More Fewer

The Oasis dehumidifiers are among the widely used drying devices that have been successfully employed on construction sites and by private users for many years. The devices have now been revised and adapted to the latest state of technology with the newest environmentally friendly refrigerant R290 and improved efficiency. The Oasis D165 is suitable for basements and rooms up to 90m² and comes standard with a large bucket as well as a direct hose connection.Although visually very similar, the D165 dehumidifier has been completely revised in various respects compared to its predecessor:• improved efficiency• higher dehumidification performance• environmentally friendly refrigerant R290• improved automatic self-defrosting, thus usable down to 5°C (previously: 8°C)• reinforced front cover with spark guard bowl• reinforced, load-bearing wheelsThe dryer stands on 4 wheels but can also be mounted on a suitable wall bracket available from us if desired. The air intake area is at the back, where a filter cleans the moist air. The filter itself is easy to remove and clean. The dry air is blown out towards the front into the room. The Oasis is therefore ideal for general moisture control in a classic basement environment, for example in new buildings, but also for unattended continuous operation in temperature-controlled archives and on construction sites. For active laundry drying, the blower is rather too weak.The target humidity is regulated via a stepless hygrostat on the front. Once the set value is reached, the dehumidification operation pauses (the ventilation also stops) until the humidity rises again. The operation continues with the unchanged setting even after a power interruption. The D165 is therefore also suitable for operation with a timer, if you want to run the dryer, for example, only during off-peak hours. Thanks to the pipe evaporators, the D165 extracts water from the air even in low humidity ranges.The water is collected in the tank pushed in at the back, a float mechanically interrupts operation when full. Alternatively, a hose can be screwed onto the condensate collection tray (with a coupling / 3/4-inch thread), with the hose needing to have a slope towards the drain (no pump integrated in the device).usage examplesCellar Moisture: Ideal for damp cellars, old walls, and laundry rooms. Eliminates musty odors, stops mold growth, decomposition of masonry, and much more.Construction and Industrial Dryers: thanks to their handy, robust design, they are ideally suited for drying on construction sites and in the industry.Drying of Water Damage: The Oasis removes water from the air even in deep moisture areas through the pipe evaporators. This significantly accelerates the drying of water damage.dehumidification performanceThe dryer can be used thanks to hot gas defrosting over a wide temperature range from +5°C to +32°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:  30°C/80% r.H.: 28 liters / 24 h27°C/60% r.H.: 16.8 Liters / 24 h20°C/60% r.H.: 10.8 Liters / 24 h10°C/70% r.H.: 5.3 Liters / 24 h(r.H.=relative humidity)    Massive improvement regarding environmental compatibilityThe GWP (Global Warming Potential - impact on global warming) could be reduced by a factor of 800 (!) from 1430 (R134a) to less than 2 (R290). Furthermore, the D165 requires 10% less electricity while simultaneously increasing dehumidification performance by 14% (at room temperature 20°C, 60% r.H.). Technical data  Tension 230V / 50Hz Power consumption max. 360W Sound pressure level 1 m distance 54 dB(A) (our measurement) 2.5 m distance 51 dB(A) (our measurement) dehumidification performance max. 28 liters/day (30°C / 80% r.H.)  Bucket Capacity 9 liters, approx. 8 liters until operation interruption by float Compressor Rotary compressor  refrigerant R290 (150gr.) Dimensions (H x W x D)   60 x 38 x 36 cm (incl. wheels) Weight 23.5 Kg cessation of operations Hygrostatrad   Ambient temperature 5°C ~ 40°C  Area of application about 90m² Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years    

Learn more More Fewer

The Oasis dehumidifiers are among the widely used drying devices that have been successfully employed on construction sites and by private users for many years. The devices have now been revised and adapted to the latest state of technology with the newest environmentally friendly refrigerant R290 and improved efficiency. The Oasis D165 is suitable for basements and rooms up to 90m² and comes standard with a large bucket as well as a direct hose connection.Although visually very similar, the D165 dehumidifier has been completely revised in various respects compared to its predecessor:• improved efficiency• higher dehumidification performance• environmentally friendly refrigerant R290• improved automatic self-defrosting, thus usable down to 5°C (previously: 8°C)• reinforced front cover with spark guard bowl• reinforced, load-bearing wheelsThe dryer stands on 4 wheels but can also be mounted on a suitable wall bracket available from us if desired. The air intake area is at the back, where a filter cleans the moist air. The filter itself is easy to remove and clean. The dry air is blown out towards the front into the room. The Oasis is therefore ideal for general moisture control in a classic basement environment, for example in new buildings, but also for unattended continuous operation in temperature-controlled archives and on construction sites. For active laundry drying, the blower is rather too weak.The target humidity is regulated via a stepless hygrostat on the front. Once the set value is reached, the dehumidification operation pauses (the ventilation also stops) until the humidity rises again. The operation continues with the unchanged setting even after a power interruption. The D165 is therefore also suitable for operation with a timer, if you want to run the dryer, for example, only during off-peak hours. Thanks to the pipe evaporators, the D165 extracts water from the air even in low humidity ranges.The water is collected in the tank pushed in at the back, a float mechanically interrupts operation when full. Alternatively, a hose can be screwed onto the condensate collection tray (with a coupling / 3/4-inch thread), with the hose needing to have a slope towards the drain (no pump integrated in the device).usage examplesCellar Moisture: Ideal for damp cellars, old walls, and laundry rooms. Eliminates musty odors, stops mold growth, decomposition of masonry, and much more.Construction and Industrial Dryers: thanks to their handy, robust design, they are ideally suited for drying on construction sites and in the industry.Drying of Water Damage: The Oasis removes water from the air even in deep moisture areas through the pipe evaporators. This significantly accelerates the drying of water damage.dehumidification performanceThe dryer can be used thanks to hot gas defrosting over a wide temperature range from +5°C to +32°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:  30°C/80% r.H.: 28 liters / 24 h27°C/60% r.H.: 16.8 Liters / 24 h20°C/60% r.H.: 10.8 Liters / 24 h10°C/70% r.H.: 5.3 Liters / 24 h(r.H.=relative humidity)    Massive improvement regarding environmental compatibilityThe GWP (Global Warming Potential - impact on global warming) could be reduced by a factor of 800 (!) from 1430 (R134a) to less than 2 (R290). Furthermore, the D165 requires 10% less electricity while simultaneously increasing dehumidification performance by 14% (at room temperature 20°C, 60% r.H.). Technical data  Tension 230V / 50Hz Power consumption max. 360W Sound pressure level 1 m distance 54 dB(A) (our measurement) 2.5 m distance 51 dB(A) (our measurement) dehumidification performance max. 28 liters/day (30°C / 80% r.H.)  Bucket Capacity 9 liters, approx. 8 liters until operation interruption by float Compressor Rotary compressor  refrigerant R290 (150gr.) Dimensions (H x W x D)   60 x 38 x 36 cm (incl. wheels) Weight 23.5 Kg cessation of operations Hygrostatrad   Ambient temperature 5°C ~ 40°C  Area of application about 90m² Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years    

Learn more More Fewer

This extendable rail simplifies the attachment of the exhaust hose to windows with roller shutters and increases the cooling efficiency of mobile air conditioners. It is easily braced into the guide rails on the left and right and can be precisely extended in width up to a maximum of 136cm. The window cover visually harmonizes perfectly with white windows, allowing for an almost invisible discharge of warm air through the window from the outside. The exhaust hose must have a diameter of Ø15 cm; thinner or thicker hoses do not fit this system. The connection nozzle can be placed in either the left or right area.    Advantages at a Glance   • Particularly simple and visually appealing attachment of the exhaust hose to the window• The cooling efficiency of the air conditioning is increased, as less warm air from outside enters the room.• Uncomplicated installation without craftsmen• Stop hanging exhaust hoses out of the windows• Adjustable variable for window widths of approx. 47 to 136 cm     "The following models from our range are compatible:" • Argo: Argo Chronos • Trotec: PAC Series PAC 2100 X, PAC 2600 X, PAC 3000 X A+, PAC 3500 SH, PAC 3900 X     "For casement windows and casement doors as well as tilt windows and tilt doors, please consider our 'HotAirStopper' as a suitable solution." Trotec Article No. 6.100.000.039

Learn more More Fewer

Pro activated carbon filter suitable for air purifier WDH-H600A. The replacement is easy and occurs when the already installed filter can no longer fulfill its function.Absorbs and cleans many types of smoke and odors (e.g. cigarette smoke) and also helps to break down toxic vapors, gases, and solvents (e.g. formaldehyde, benzene, ammonia, sulfur, etc.).Sold individually.  Technical data:Weight 1 kg

Learn more More Fewer

This pumping kit has been specially designed for our construction dryers of the AD432R, AD432F, and DHP25 series. It is designed to be hung directly in the condensate water bucket of the devices with a metal bracket. This allows for spontaneous decisions depending on local conditions, whether the water should be collected in the bucket or pumped out directly via a hose.The power supply is provided by the supply plug, which is located directly behind the bucket in the housing of all dehumidifiers of the new series AD432R + AD432F and DHP with refrigerant R290. (Important: older models AD432F with refrigerant R134a do not yet have this connection.)The pump used in this kit is the quality product "Eckerle EE400", a quiet centrifugal pump with a high flow rate. Overview of flow rates in liters at different delivery heights: Funding amount Funding performance0 m max. 350 liters / hour.1 m max. 280 liters / hour.2 m  max. 220 liters / hour.3 m max. 100 liters / hour. Characteristics:• Lifting height up to 3.5 m • Quiet operation• Ball bearing drive shaft• Integrated check valve (prevents backflow of hose contents into the pump)• Overflow safety switchThe condensate pump is equipped with a level float that initiates the pumping process at a certain fill level.The hose leading away from the pump has an inner diameter of 8mm. A piece of 3m length is included in the delivery. You can order larger lengths from us if you wish.Eckerle condensate pumps are designed for the transport of condensate from air conditioning systems, refrigeration units, dehumidifiers, gas and oil condensing appliances. The housing is made of ABS, making it chemically (up to pH 3) and thermally (up to 70°C) resistant to acidic condensate. Technical dataModel: Eckerle EE400Voltage: 230V - 50/60Hz, 65VAInput: 65WWeight: 2.5 kgCheck valve: Yes

Learn more More Fewer