The top dryer for larger spaces. The FDK performs reliable heavy-duty work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round drying of garages, industrial halls, or in water management facilities. You can only get this model from us; comparable products on the market cost twice as much.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% r.H.: 80 liters / 24 h20°C/80% r.H.: 45 liters / 24 h20°C/60% r.H.: 30 liters / 24 h10°C/60% r.H.: 18 Liters / 24 h(r.H.=relative humidity)Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards) Smaller versionThe device is also available in the smaller version "FDK44" -> DetailsComparable devices: Lunor L75     Technical data  Tension 230V / 50Hz Power consumption 1020W (at 20°C/60% r.H.), max. 1550W Sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% r.H.)  amount of recirculated air 1100 m³/h (installed, free-blowing approx. 1350 m³/h) condensate tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R410A Dimensions (L x H x D)  73 x 58 x 58 cm Weight 48 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C  Area of application bis 250m²/1000m³ Swiss plug Yes   hose connection Yes guarantee 2 years      

Learn more More Fewer

This model is suitable for single-family homes with larger amounts of laundry and in drying rooms that can become cooler in winter. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer functionAdditionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.   executionCompact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating: The Secomat150H is equipped with a 1350W heater. This automatically switches on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage. In this case, please refer to the standard version "Secomat150".Technically, the Secomat dryers can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of deliveryThe delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly"Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  drying room: up to 25 m² Drying performance: 3.17 Kg/h Consumption per kg of laundry:   0.30 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secomat 150H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification with 15kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1300 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

One of the strong Krüger Secomat models. It is suitable for single-family homes with a lower drying requirement for rooms that are unheated. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device: drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating Option: This model is also available with a 1350W heater for an additional charge. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage.Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  Krüger article: 389.01 drying room: up to 25 m² Drying performance: 3.08 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secoamt 200H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification for 20kg laundry in the room) Examples of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1400 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer