ACTIONS

Space-saving, extendable laundry hangers for wall mounting. This system offers surprisingly much space for drying smaller laundry items on 5 metal bars, each 1.20m wide. Ideal in spatially confined conditions or as a secondary hanging for occasional drying needs.Easy assembly: the system is fully assembled and only needs to be fixed to the wall with 4 screws / dowels (included in the delivery).Space requirement: extended max. 120 x 46 cm from the wall, retracted 120 x 10 cmLoad capacity approx. 12 kgMaterial: Metal rods, white powder-coatedShipping costs for 1 piece Fr. 18.- (this laundry rack is sent exclusively by courier due to the package dimensions). warranty 2 years Technical data   width 120 cmtotal height 17 cmDepth 10-46 cm from wall  

Learn more More Fewer

Replacement filters for humidifiers (2-pack)Contains two filter cartridges, suitable for the humidifiers from Stadler Form and Stylies. This is the latest version of the filters, which are now made from plant-based textile. This version is more environmentally friendly compared to the previous version with a plastic frame. The humidification performance is practically the same as that of the Stylies version.Depending on water hardness, the filter should be changed approximately every 2 to 3 months.Antibacterial treatment against bacterial growth in waterHumidifier models:Stadler Form: Oskar little, Oskar, Oskar bigStylies: Orion, Mira, Carina, LibraTip: Please note the 4-pack for model "Oskar big", which also fits the smaller model "Oskar" -> Filter in 4-packNote: when the filters are first inserted into the humidifier in a dry state, it may be that the housing does not close completely. However, once the filters come into contact with water, they will adapt perfectly to the space.Depending on water hardness, the filter should be changed approximately every 2 to 3 months.

Learn more More Fewer

Replacement filters for Stadler Form and Stylies – 4-pack Original replacement filters made of plant-based textile for reliable humidification – more eco-friendly material and treated with an antibacterial agent. This set contains four filter cassettes in the latest design of the original filters for selected humidifiers from Stadler Form and Stylies. These are genuine original filters, not generic replacements. The new filter material consists of plant-based textile, making it more eco-friendly than the previous version with plastic frames. The humidification performance remains practically the same compared to the previous Stylies filter version. This allows you to benefit from the updated material design without having to sacrifice the proven functionality of the filters. The filters are treated with an antibacterial agent to counteract bacterial growth in the water. Depending on water hardness, it is recommended to replace them every two to three months so that the filters can continue to function reliably. Product benefits: 4 original filter cassettes per pack Latest filter design Made from plant-based textile More eco-friendly than the previous version with plastic frames Virtually identical humidification performance Antibacterial treatment against bacterial growth in the water Recommended replacement every 2 to 3 months, depending on water hardness For selected humidifiers from Stadler Form and Stylies Compatible humidifier models Stadler Form: Oskar little, Oskar, Oskar big, Noah, Noah big, Karl, Karl big Stylies: Orion, Mira, Carina, Libra Note on initial use When inserting the dry filters for the first time, you may find that the humidifier housing does not close completely. As soon as the filters come into contact with water, they adjust to the available space and fit in their intended form. Technical data Product Replacement filter for humidifiers Package contents 4 filter cassettes Version Original filter, latest version; not generic replacement filters Filter material Plant-based textile Frame New design, more eco-friendly than the previous version with plastic frame Humidification performance Practically the same as the previous Stylies version Treatment Antibacterial against bacterial growth in the water Recommended replacement interval Approx. every 2 to 3 months, depending on water hardness Compatible manufacturers Stadler Form and Stylies Stadler Form models e.g. Oskar little, Oskar, Oskar big, Noah, Noah big, Karl, Karl big Stylies models e.g. Orion, Mira, Carina, Libra

Learn more More Fewer

The "B2-PTC" is a very effective heater for rooms, cars, and caravans.The ceramic heating element provides an incredibly good efficiency of input energy to generated heat. It is therefore ideal wherever only standard household sockets are available, but maximum heating power is required.It is also noticeable that the heating phase is much faster, as the heater reaches operating temperature within a few seconds. It heats the air by a whopping 65°C (difference between intake air temperature and exhaust air temperature), which is almost double the difference compared to conventional construction heaters. Therefore, this heater should not be placed within reach of children.The heating power can be selected in two stages: 1000W or 2000W. The target temperature is determined via a stepless thermostat controller.Normal current 230/V, min. 10 Amperes, Swiss plug with connection cable.Product advantages• Room thermostat included• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Quiet running• Motor with thermal protection• Overheating thermostat• Built-in thermostat• Automatic Reset   Technical data  Dimensions (W x H x D)  200x200x200 mm Weight 2.5 kg Housing color Metal yellow powder-coated Protection class IP21 Selectable heating power 1000 / 2000W insurance 8.7 A Motorspannung 230 V Motorstrom 0.2 A airflow 97 m³ / h temperature range 0 - 40 °C guarantee 2 years

Learn more More Fewer

10m cable reel 230V up to 2300W or 10AThis high-quality cable reel with automatic cable retraction for private and commercial use.Ideal for heating devices and machines on a normal power supply of 230V up to 2300W.Always fully unwind the cable reel when in use.   Technical data Cable length: 15 meters (cross-section 1.5 mm²) Warranty: 2 years

Learn more More Fewer

This handy floor fan, made of sturdy metal with aluminum rotors (30 cm diameter), offers a flexible and powerful solution for a variety of applications. The fan head can be tilted vertically by 100°, allowing the airflow to be directed precisely in any desired direction. With three speed settings, a practical carrying handle, and an excellent price-performance ratio, this fan is an ideal choice for everyday use. The use of a copper coil ensures a long lifespan and reliable operation. The fan is excellent for supporting drying after water damage or for effective air circulation in any rooms. Thanks to its high reliability, it is also suitable for unattended continuous operation.Characteristics• Fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's airflow direction is continuously adjustable horizontally by 100°.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.50 m in length• No assembly required, the fan is ready to use immediately.• RoHS and CE compliant • Suitable wall/ceiling mount available as an accessory   Technical data  Power consumption max. 37 Watts Rotordurchmesser 30 cm Airflow Up to 3019 m³/h noise 1 m distance: max. 58 dB(A)2.5 m distance max. 55 dB(A) speed levels 3 Revolutions Level 1 / 2 / 3:  950 / 1100 / 1250 per minute Cable length approx. 1.50 m Connection EU plug with suitable fixed adapter for Switzerland (230V) Dimensions ( W x H x D ) 395 x 375 x 185 mm Weight 2.8 kg Trotec article no. 1.510.006.011 Guarantee 2 years Documents / Downloads   Operating Instructions German  User manual French  User manual Italian  User manual English

Learn more More Fewer

TDS 30 R – Electric heater 5 kW Professional electric fan heater for construction sites, workshops and indoor areas Professional electric heater with 5 kW heating capacity The TDS 30 R is a robust and powerful electric fan heater with up to 5 kW heating capacity for professional use. Thanks to the electric heating principle, the unit operates without consuming oxygen, without combustion exhaust gases and without condensation. The compact 400 V electric heater is particularly suitable for unheated indoor areas, workshops, garages, construction sites, assembly areas, warehouses and industrial halls as well as other commercial applications. Electric fan heater for demanding applications The TDS 30 R was developed for reliable use in demanding environments. As an electric construction heater, it produces clean and condensation-free heat without consuming oxygen from the room air. This makes the fan heater particularly suitable for heating enclosed or poorly ventilated indoor areas. As no combustion exhaust gases are generated, no exhaust air ducting is required. Typical areas of application include construction sites, workshops, garages, automotive repair shops, warehouses, industrial halls, shipbuilding areas, agriculture and commercial interior spaces. Flexible heating capacity and integrated thermostat The desired warm air temperature can be set via the integrated, infinitely variable thermostat. The heating capacity can be adjusted to the respective heat requirement via two heating stages. Additionally, the TDS 30 R features a separate fan stage without heating function. This allows the unit to be used for pure air circulation as well. Ventilation only with 0.05 kW Heating operation with 2.5 kW Maximum heating capacity 5 kW Infinitely adjustable thermostat Robust metal housing and high mobility The housing of the electric heater is made of fully galvanized and painted sheet steel. This makes the TDS 30 R designed for use in demanding environments. The ergonomic carrying and transport handle allows for easy relocation. Weighing only 5 kg, the compact fan heater is particularly easy to transport and use flexibly. Safety and reliable operation The TDS 30 R features several integrated safety functions. These include overheating protection, tilt protection, thermal protection for the blower motor as well as a fan run-on function. After switching off, the fan can continue to run to dissipate residual heat remaining in the unit in a controlled manner. This reliably cools down the components. Safety benefit: Electric heating produces no combustion exhaust gases and no condensing moisture. This makes the TDS 30 R particularly suitable for heating indoor spaces. Your benefits at a glance Maximum heating capacity of 5 kW 400 V connection with CEE 16 A Robust metal housing Compact design and low weight Integrated, infinitely variable thermostat Condensation-free heat without oxygen consumption Overheating protection Tilt protection Blower motor with thermal protection Fan run-on function Pure fan operation possible Ergonomic carrying and transport handle Possible areas of application Car and automotive workshops Construction sites and assembly operations Warehouses and industrial halls Garages and workshops Shipbuilding and industrial applications Agricultural sectors Catering/hospitality Greenhouses Technical data Trotec item no. 1410000003 Heating element Stainless steel heating coil Operating principle Electric Housing design Metal Fan type Axial Dimensions and weight Length without packaging 275 mm Width without packaging 220 mm Height without packaging 330 mm Weight without packaging 5 kg Weight including packaging 5.5 kg Performance and power supply Mains connection and frequency 400 V / 50 Hz Connection plug CEE 16 A, 5-pin Nominal current consumption 7.22 A Maximum heating capacity 5 kW (4,300 kcal/h) Recommended fuse 16 A Cable length 1.2 m Heating capacity and air volume Heating stages 1: Ventilation only (0.05 kW) 2: Ventilation + heating (2.5 kW) 3: Ventilation + heating (5 kW) Max. air volume 580 m³/h Fan stages 1 Max. temperature increase at 1 m 85 °C Operating conditions and safety Temperature range -15 °C to 25 °C Sound level at 1 m distance 56 dB(A) IP rating IP20 Safety functions Auto-restart function, fan run-on function, tilt protection Mobility Carrying/transport handle(s) Warranty 2 years

Learn more More Fewer

TDS 30 M – Electric Heater 5 kW with PTC Ceramic Professional fan heater with PTC technology for construction sites, workshops, and commercial use Powerful 5 kW fan heater with PTC technology The TDS 30 M is a professional electric heater with 5 kW heating capacity and a long-lasting PTC ceramic heating element. Thanks to its high airflow rate, this compact fan heater is ideal for rapidly heating large and cold rooms. The device operates on 380–400 V high-voltage current and offers two heating levels as well as a separate cold-air mode. The robust construction and stable feet make the TDS 30 M a reliable solution for construction sites, workshops, warehouses, production halls, and commercial spaces. PTC ceramic technology for uniform warmth The long-lasting PTC ceramic heating element offers numerous advantages over conventional heating coils. The flow of warm air is generated more evenly and without drafts, and noise levels remain comparatively low. A special benefit of PTC technology is the self-regulating power consumption. The PTC heating element adjusts its output depending on the ambient temperature. This allows for more uniform heat distribution and reduces the risk of overheating. Since the PTC heater works without classic glowing heating coils, there is no burning of dust on hot heating wires. As a result, the indoor air is not additionally burdened by burnt dust. Advantages of the PTC heater Self-regulating PTC ceramic technology More uniform room temperature and lower temperature fluctuations Consistent and draft-free warm airflow No dust burning on classic heating coils Integrated overheating protection Thermal protection and fan run-on function Infinitely adjustable thermostat Condensation-free heat without oxygen consumption Heat-insulated carrying handle Robust metal housing Safe and reliable operation The TDS 30 M features several integrated protective functions for reliable operation. These include overheating protection, thermal protection, and an auto-restart function. Positioning the controls below the heating area protects the electronics from rising residual heat, thus contributing to the high reliability of the device. The fan motor is also equipped with thermal protection. The fan run-on function further supports the controlled cooling of the components after the heating operation. PTC advantage: The ceramic heating element independently adjusts its power consumption to the ambient temperature, thereby contributing to safe and uniform heating operation. Heating capacity and operating modes The maximum heating capacity is 5 kW. Two heating levels are available via the function switch. In addition, the TDS 30 M can be used solely as a fan without the heating function. Ventilation only – 0.05 kW Ventilation + Heating – 3.3 kW Ventilation + Heating – 5 kW Max. airflow 575 m³/h Robust construction and easy mobility The robust metal housing is designed for use in demanding environments. The feet ensure a stable position during operation. Thanks to the integrated heat-insulated carrying and transport handle, the electric heater, weighing only 4 kg, can be easily transported to the desired location. Furthermore, the unit is stackable, making it particularly practical for storage and transport. Potential applications The TDS 30 M is suitable as an electric construction heater, workshop heater, and fan heater for numerous commercial and professional applications. Auto and car workshops Construction sites and assembly operations Warehouses and production halls Workshops and commercial premises Catering/Hospitality Greenhouses Your benefits at a glance 5 kW maximum heating capacity PTC ceramic heating element 380–400 V high-voltage power connection CEE 16 A, 5-pin connection plug 575 m³/h maximum airflow Infinitely adjustable thermostat Fan-only operation possible Condensation-free heat without oxygen consumption Overheating protection Auto-restart function Fan motor with thermal protection Fan run-on function Stable feet Stackable for space-saving storage Technical data Trotec item no. 1410000054 Heating element PTC ceramic heating element Operating principle Electric Housing design Metal Fan type Axial Storage capacity Stackable Dimensions and weight Length excluding packaging 250 mm Width excluding packaging 205 mm Height excluding packaging 360 mm Weight excluding packaging 4 kg Weight including packaging 5 kg Performance and power supply Mains connection and frequency 380–400 V / 50 Hz Connection plug CEE 16 A, 5-pin Nominal current consumption 7.6 A Power consumption 5 kW Recommended fuse protection 10 A Cable length 1.15 m Heating capacity and airflow Levels 1: Ventilation only (0.05 kW) 2: Ventilation + Heating (3.3 kW) 3: Ventilation + Heating (5 kW) Max. heating capacity 5 kW (4,300 kcal/h) Max. airflow 575 m³/h Fan stages 1 Max. temperature increase at 1 m distance 90 °C Operating conditions and safety Temperature range -15 °C to 25 °C Sound level at 1 m distance 53 dB(A) IP rating IP20 Overheating protection 98 °C Safety functions Overheating protection, auto-restart function Mobility Carrying/transport handle(s), feet Warranty 2 years

Learn more More Fewer

These robust, industrial fan heaters are equipped with a durable metal housing and are designed for floor-standing use. Thanks to the practical carrying handle and the sturdy rack, they can be easily transported and used flexibly. The operation of the device is incredibly simple: The function switch allows the heating power to be set to either half or full power, and an exclusive fan operation is also possible. An integrated room thermostat ensures a constant temperature by automatically turning off the heating when the set value is reached and keeping the fan running for continuous air circulation. These space heaters are extremely versatile and are ideal for a wide range of applications, including construction heating, garages, workshops, storage rooms, retail spaces, greenhouses, sports and factory halls, as well as many other areas of use.Characteristics• Heating power adjustable up to 9000 watts• Thermostat for regulating and setting the desired temperature• Two heating levels selectable (1 = 4500 watts / 2 = 9000 watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection• Stepless temperature control (5 ~ 35° C)• Integrated protection mechanism against overheating• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• Quiet operation• No oxygen consumption• CE Conformity, 2006/95/EC, 2004/108/EC, EN 60335-1, EN 60335-2-30• Made in ItalyMiscellaneous• A five-pole 16 A high-voltage connection 380V/415V (50/60Hz) with CEE16A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.• No power cable included, the plug is directly on the device. You can find suitable power cables in various lengths and designs with us. Examples of useTemperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden houses, laundry rooms, and for use in professional and hobby activities, etc.Drying: Ideal for faster drying of plaster, screed, etc. (work can be continued or applied very quickly)Damp Rooms: Ideal for damp basements, old walls, and drying all damp objects.Damage Removal: After flooding, after damage from extinguishing water, or in case of decay, these devices are ideally suited to support the drying process.How much heat do I need?Our free heat demand calculator helps you determine the required heating power for your rooms.'Here you can access the online calculator: Calculate heat demand' Technical data Tension 380V - 415V / 50Hz Power consumption 2 stages 4.5 kW / 9 kW Protection max. 16 A Room thermostat 5 - 35°C Air volume flow 800 m³/h Protection class IPX4 Dimensions (H x W x D)   41 x 42 x 32 cm Weight: 9 Kg Operational cessation Drehrad Area of application up to max. 90m² Plug CEE 16 A Guarantee 2 years

Learn more More Fewer

Versatile blowers for every application – reliable and robust: The compact TFV S-series turbo fans impress with their flexible usability and reliability under various conditions. Versatility and Performance for Professionals Their durable housing made of long-lasting polyethylene makes them particularly light, impact-resistant, and flexible to handle. Thanks to the possibility of operating and storing the device at various tilt angles, it optimally adapts to different application scenarios. Especially the TFV 10 S is ideally suited for smaller areas and hard-to-reach cavities due to its extremely compact design. The combination of high robustness, strong performance, variable positioning, and an excellent price-performance ratio makes the TFV S-series the ideal choice for renovation companies, cleaning companies, and craftsmen. Variable Positioning: Whether set up at 0°, 45°, or 90° – the TFV 10 S guarantees a stable stand and efficient air circulation in any position. Highly Efficient Drive: A double-flow radial fan with an oversized special shaft and quality motor prevents one-sided shaft load for maximum service life. Your Advantages at a Glance Impact-resistant housing made of durable polyethylene Double-flow radial fan with oversized special shaft Internal components entirely made of robust metal Operation and storage possible at multiple tilt angles (0°, 45°, 90°) High energy efficiency – powerful yet energy-saving Quality motor with ball bearing against one-sided shaft load Compact dimensions, ideal for small areas and hard-to-reach cavities Technical Data Performance & Airflow Air volume max. stage 355 m³/h Airflow / Air discharge direction blowing out Air outlet speed 8.6 m/s (31 km/h) Air pressure (max. stage) 90 Pa Blower stages / Fan type 1 / radial Max. conveying medium temperature 60 °C Electrical Values & Connection Power consumption 0.075 kW (75 Watt) Mains connection 230 V, 50 Hz Nominal current consumption / Pre-fuse 0.5 A / 10 A Connection plug CEE 7/7 with Swiss fixed adapter Cable length 3 m IP protection class IP22 Noise level (3 m distance) 61.5 dB(A) Dimensions & Weight Dimensions (W x H x D) 248 x 300 x 275 mm Weight 3.5 kg Trotec item no. 1.510.003.011 Warranty 2 years

Learn more More Fewer

"Sockets are often in short supply on construction sites. For example, if you are operating fan heaters, sufficient power connections are important."With this power distributor / construction power distributor, you can draw power from a 16A connection and distribute it to individual devices, for example to a 5 kW heater, and you also have 4 free 230V sockets available for smaller devices or lighting. Comparable power distributors cost twice as much at the hardware store.Important: the maximum load is 16A. Connecting 2 x 9kW heaters simultaneously exceeds the capacity of the distributor. For this purpose, please refer to the CEE32 power distributor at the bottom of this page.input connector1 x CEE16A, 3P+N+E 400V, IP44, cable approx. 2 m H07RN-F, 5G x 2.5mm²output connector2 x CEE16A, 3P+N+E 400V, IP442 x Typ252 x Typ13 insurance1 FI, 25A 4 P, 0.003A, 400 V, 2 LS 16A 3P, 400V, 1 LS 13A 1P, 230V  Technical data  connection cable 5 x 2.5 mm² (2 m) connector 1 x CEE16A, 5P outputs 230V 2 x T13 - 2 x T25 outputs 400V 2 x CEE16A, 5P Residual current device 1 FI, 40A, 4P, 0.03 A 230V fuse 2 x LS10A fuse 400V 4 x LS16A Protection class housing IP54 & IP44 Material PVC supply voltage 400 V / 50 Hz External dimensions distributor (H x W x D) 335 x 300 x 115 mm Weight (net) 5.9 kg guarantee 2 years

Learn more More Fewer

15 kW Elektro-Heizlüfter FEH für Baustelle und Industrie Leistungsstarke Wärme für Baustellen, Industriehallen und grosse Räume. Robust konstruiert, flexibel einstellbar und für den anspruchsvollen gewerblichen Einsatz ausgelegt. Der Elektro-Heizlüfter FEH bietet eine Heizleistung von bis zu 15 kW und eignet sich für die Beheizung von Baustellen, Werkstätten, Industriehallen und grosszügigen Räumlichkeiten. Seine robuste Konstruktion und die unkomplizierte Bedienung machen ihn zu einer praktischen Lösung für den professionellen Einsatz. Das widerstandsfähige Metallgehäuse in Königsblau ist stapelbar und verfügt über ein integriertes Rack, das die Lagerung und den Transport erleichtert. Stabile Tragegriffe unterstützen das Handling im Arbeitsalltag. Über drei Heizstufen lässt sich die Leistung passend zum Wärmebedarf auf 5, 10 oder 15 kW einstellen. Alternativ steht eine reine Ventilatorstufe zur Verfügung, mit der die Luft auch ohne Heizbetrieb umgewälzt werden kann. Das integrierte Raumthermostat regelt die Temperatur im Bereich von 4 bis 40 °C. Sobald die eingestellte Zieltemperatur erreicht ist, wird die Heizung abgeschaltet, während der Ventilator für eine kontinuierliche Luftumwälzung weiterläuft. Ein zusätzliches Sicherheitsthermostat schützt vor Überhitzung. Der Anschluss erfolgt über das fest angeschlossene, rund 1,20 m lange Kabel mit fünfpoligem CEE-32-A-Stecker nach Schweizer Norm. Dank Schutzart IPX4 ist das Gerät gegen Spritzwasser geschützt. Damit eignet es sich für vielfältige Einsatzbereiche in Gewerbe und Industrie, sofern die jeweiligen Betriebs- und Sicherheitsbedingungen eingehalten werden. Hinweis: Dieses Modell wird angeboten, solange Vorrat vorhanden ist. Eigenschaften: Heizleistung bis 15 kW Drei Heizstufen: 5 / 10 / 15 kW Separate Ventilatorstufe ohne Heizung Integriertes Raumthermostat Temperaturregelung von 4 bis 40 °C Ventilatorbetrieb zur kontinuierlichen Luftumwälzung bei erreichter Solltemperatur Sicherheitsthermostat als Überhitzungsschutz Robustes, stapelbares Metallgehäuse in Königsblau Integriertes Rack und stabile Tragegriffe Spritzwasserschutz nach IPX4 Fest angeschlossenes Kabel mit CEE-32-A-Stecker Für Baustellen, Werkstätten und Industrie geeignet Flexible Heizleistung und Temperaturregelung Mit den drei wählbaren Heizstufen lässt sich die Wärmeabgabe an den jeweiligen Bedarf anpassen. Die Leistungsstufen von 5, 10 und 15 kW ermöglichen einen flexiblen Betrieb in unterschiedlichen Arbeitssituationen. Für die Luftumwälzung ohne zusätzliche Wärmezufuhr kann der reine Ventilatorbetrieb genutzt werden. Das Raumthermostat regelt die Temperatur automatisch innerhalb seines Einstellbereichs von 4 bis 40 °C. Nach Erreichen der gewünschten Temperatur schaltet die Heizung ab; der Ventilator läuft weiter und unterstützt die gleichmässige Verteilung der Raumluft. Robuste Konstruktion und Sicherheit Das strapazierfähige, königsblaue Metallgehäuse ist auf den Einsatz in anspruchsvollen Arbeitsumgebungen ausgelegt. Durch die stapelbare Bauweise und das integrierte Rack lässt sich der Heizlüfter platzsparend lagern. Die stabilen Tragegriffe erleichtern den Transport und die Positionierung am Einsatzort. Ein Sicherheitsthermostat schützt das Gerät vor Überhitzung. Die Schutzart IPX4 bietet Schutz gegen Spritzwasser. Die Eignung für einen konkreten Einsatzort hängt zusätzlich von den örtlichen Bedingungen, den elektrischen Anschlussvorschriften und den erforderlichen Sicherheitsmassnahmen ab. Elektrischer Anschluss Der FEH wird mit einem fest angeschlossenen Kabel von ca. 1,20 m Länge und einem fünfpoligen CEE-32-A-Stecker nach Schweizer Norm geliefert. Für den Betrieb ist ein geeigneter 400-V-Netzanschluss erforderlich. Die maximale Stromaufnahme beträgt 25 A. Technische Daten Heizleistung 15 kW Leistungsstufen 5 kW / 10 kW / 15 kW Luftvolumenstrom 1550 m³/h Raumthermostat-Bereich 4–40 °C Schalldruckpegel 52 dB(A) Netzanschluss 400 V / 50 Hz Anschlusskabel ca. 1.20 m mit CEE 32 A Stecker (5-polig, Schweizer Norm) Stromaufnahme max. 25 A Schutzart IPX4 (spritzwassergeschützt) Abmessungen (H × B × T) 550 × 410 × 360 mm Gewicht 14.5 kg Garantie 2 Jahre

Learn more More Fewer

With this practical light hose reel, construction sites, stairwells, and generally poorly lit areas can be illuminated easily and quickly. It is quickly installed and very easy to handle.   Ideal for example • for lighting of construction sites and industrial halls• Guidance in dark indoor and outdoor areas (IP 55)• Lighting of market stalls, Christmas markets • Party lighting   Hints • The hose can be shortened at 1 m intervals with scissors if necessary, according to the procedure described in the user manual.• Only operate in the unrolled state• Continuous operation longer than 12 hours shortens the lifespan of the LEDs.   Technical data   brand Ekstrom Material Metal frame / Plastic casing Cable length 25 m Recording 275 W (11 W / m) Lumen 1000 lm / m Light color 6000 K connector T12 Protection class IP55 Operating voltage 230 V 50 Hz Mass (Height x Width x Depth)  340 x 250 x 205 mm Net weight 5.7 kg guarantee 2 years

Learn more More Fewer

High-quality power distributor with rack at a bargain price! Especially on construction sites, power outlets are often in short supply. If you have, for example, electric heaters in operation, sufficient power connections are important. With this power distributor / construction power distributor, you can draw power from a 32A connection and distribute it to individual devices, for example, to 2 heaters (total consumption max. 11000W) and additionally have more 230V outlets available for smaller devices or lighting. Comparable power distributors cost twice as much at the hardware store.  Technical data  connection cable 5 x 4 mm² (2 m) connector 1 x CEE32A, 5P outputs 230V 2 x T13 - 2 x T25 outputs 400V 1 x CEE32A, 5P - 2 x CEE16 A, 5P Residual current device 1 FI, 63A, 4P, 0.03 A 230V fuse 2 x LS10A fuse 400V 4 x LS16A Protection class housing IP54 & IP44 Material Stom distributor PVC supply voltage 400 V / 50 Hz external dimensions incl. rack (H x W x D) 640 x 350 x 590 mm Weight (net) 6.88 kg guarantee 2 years

Learn more More Fewer

The Heater 200LS is an affordable yet high-quality infrared-based heating solution. It can be mounted on the ceiling using the included chain, similar to a lampshade, and thus provides warmth from above. It is ideal for creating a cozy table setting on the balcony, as well as for providing targeted heating in workplaces such as basements, workshops, or production halls.The 200LS has a protection class of IP24. This means that it is protected against splashing water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, which means at a normal room height of about 2.5m, it covers a radius of about 2-3 meters.Heater:The heater has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating power can thus be adjusted at the device itself with the push of a button, but also via the included remote control to either 1000W or 2000W. The heating tubes emit not only heat during operation but also a bright light, which sufficiently illuminates the warmed area.LED light:Additionally, the 200LS is equipped with an LED lamp that can be turned on independently of the heating operation. It emits a subtle white light downwards. The brightness of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when heating is not in operation.The device is almost entirely made of metal and impresses with its very robust workmanship.Properties & Advantages over other heaters:• Equipped with two individual heating tubes• IP24 - suitable for indoor and outdoor use• Heating power selectable 1000 watts or 2000 watts• Integrated, separately switchable LED lamp as a light source even without heating operation• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning the LED light on/off.• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataVoltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 WHeating levels: 2 (1000 W / 2000 W)Dimensions (H/W/D): 265 x 430 x 430 mmProtection class: IP24 (protected against foreign bodies >12.5 mm and against splashing water)Weight: 3.5 kg

Learn more More Fewer

  The air heater BLP 33 M (33kW) and the more powerful version BLP 53 M (53kW) are a simple solution for quickly heating ventilated zones and rooms using gas. The heating power is strong and adjustable via a rotary switch.In addition to a commercially available gas bottle (available, for example, at gas station shops), a 230V socket is required for the operation of the control system and the fan. The delivery includes the ready-to-plug device, including a connection hose with a non-return valve for connecting to the gas bottle.ImportantThe combustion of gas consumes oxygen. Therefore, this heater must not be used in closed, poorly ventilated rooms, especially not in small rooms. Furthermore, a safety distance from flammable materials must be observed. The heater must also not be operated in rooms where the air contains explosive gases.Product features• Manual ignition• Regulator includes a safety valve that stops the gas flow in the event of cracks in the gas line.• Pressure reducer and gas line included in the set• Motor with thermal protection• Overheating thermostat• Adjustable Heat• Robust and durable construction• Easy maintenance• Safety gas valve with thermoelement• Solenoid valve Technical data    33M 53M  Dimensions ( L x W x H)  552 x 220 x 342 etc   605 x 276 x 444 etc  Weight 9 kg 15 kg  Housing color Metal yellow powder-coated  air flow  1000 m3/h   1450 m3/h  Adjustable heating power  18-33 kW   36-53 kW  insurance 0.26 TO   0.48 TO  Motorspannung 220-240V / 50Hz  Pressure 0.75 - 1.5 bar Gas Propane/Butan guarantee 2 years  

Learn more More Fewer

The B35 CED is a practical, portable oil heater for open, well-ventilated areas. The heater and the oil tank are firmly connected and can be easily transported using the practical carrying handle. The heating output is a powerful 10kW. Unlike indirect oil heaters (e.g. BV77), the B35 CED does not have a separation of exhaust gases and warm air. "If the temperature is to be regulated, the optional thermostat TH5 can be connected directly, which allows the room temperature to be monitored and kept constant." The oil tank holds 15 liters. With a consumption of 0.9 liters per hour, this results in an independent heating operation of 16 hours per tank filling. A standard household socket 230V must be available for the operation of the fan.As with all heating systems of this type, the operating noise is clearly audible.Product features:• Larger air passage• Connection of an additional room thermostat possible• Two oil filters: oil tank filter and intake filter• Motor with overheating protection• Electronic flame control with photo cell• Stainless steel combustion chamber• Fuel tank with level indicator• Easily portable• Easy maintenance• Robust and durable construction   Technical data  Masse (L x B x H) 745 x 300 x 405 mm Weight 14 kg Housing color Metal yellow powder-coated air flow 280 m3/h heating capacity 10 kW Power consumption 230W (Ventilator) insurance 0.35A Motorspannung 220-240 V / 50 Hz operating noise 58 dB(A) tank capacity 15 Liter fuel Diesel / Kerosene consumption per hour 0.9 Liter (= 0.76 kg oil) Operation with a full tank   16 Std. Protection class IP41 Cable Connection cable with EU plug and Swiss fixed adapter guarantee 2 years

Learn more More Fewer

This mobile gas heater is a simple solution for quickly warming ventilated zones and rooms. The heating power is strong and adjustable via a rotary switch.In addition to a commercially available gas bottle (available, for example, at gas station shops), a standard power outlet is required for the operation of the control system and the fan. The delivery includes the ready-to-plug device, including a connection hose with a non-return valve for connecting to the gas bottle.ImportantThe combustion of gas consumes oxygen. Therefore, this heater must not be used in closed, poorly ventilated rooms, especially not in small rooms. Furthermore, a safety distance from flammable materials must be observed. The heater must also not be operated in rooms where the air contains explosive gases.Product features• Manual ignition• Regulator includes a safety valve that stops the gas flow in the event of cracks in the gas line.• Pressure reducer and gas line included in the set• Motor with thermal protection• Overheating thermostat• Adjustable Heat• Robust and durable construction• Easy maintenance• Safety gas valve with thermoelement• Solenoid valve Technical data     33M 53 M  Dimensions ( L x W x H)  552 x 220 x 342 etc   605 x 276 x 444 etc  Weight 9 kg 15 kg  Housing color Metal yellow powder-coated  air flow  1000 m3/h   1450 m3/h  Adjustable heating power  18-33 kW   36-53 kW  insurance 0.26 TO   0.48 TO  Motorspannung 220-240V / 50Hz  Pressure 0.75 - 1.5 bar Gas Propane/Butan guarantee 2 years  

Learn more More Fewer

The H600A quickly cleans the air of fine dust, pollen, bacteria, and viruses with a high purity rate. The strong ventilation is a great advantage. The more frequently the room volume passes through the device, the purer it becomes. While particles such as fine dust, as well as viruses and bacteria, are practically filtered out of the room air by the HEPA H13 filter by almost 100% with each pass through the device, odors are gradually reduced until they are completely eliminated after several passes.Properties, Features & BenefitsprefilterThe pre-filter (filter mesh) removes all larger particles such as coarse dust, hair, and lint, and ensures a longer lifespan for the other filters.HEPA Filter (H13)One of the best filters overall, this brand filter of filter class "H13" captures and filters particles as small as 0.0003mm. This includes pollen, germs, mold spores, and dust with a purity rate of 99.97%.Pro Activated Carbon FilterAbsorbs and cleans many types of smoke and odors (e.g. cigarette smoke) and also helps to break down toxic vapors, gases, and solvents (e.g. formaldehyde, benzene, ammonia, sulfur, etc.).EPA & Activated Carbon Filter Combination (E11)A filter as a combination of the two aforementioned quality filters to achieve even better results. It is placed in front of the (more expensive) HEPA H13 and activated carbon filters in the device and significantly extends their lifespan.anion exchangersProduces approx. 3 million anions/ions per second, which proactively combat smoke, odors, bacteria, viruses, and other dirt particles in the room.Air Sensor Operation (Automatic Mode)Automatically measures the air quality. If the determined air quality is very good, the device automatically switches to the lowest operating strength. If the result is the opposite and the air quality is poor or bad, the operating strength automatically adjusts upwards.Auto TimerWith the timer, you can set/select a switch-on time and a remaining runtime of the device of up to 8 hours.Touch-PanelWith this modern control panel, you can make your settings quickly and precisely.5 speed levelsFive options for your very personal requirements.night operationDimming mode as well as very quiet operation.LED display:Modern and very clear LED display, so you always have a quick overview of all settings.Furthermore, the current air quality is displayed. Both the pollution values of odors/vapors (display VOC) and the airborne particles in various sizes can be queried (display PM). The smallest displayed unit is particles smaller than 1 micrometer per cubic meter of air (display = PM 1.0). Particle size steps: 1.0 / 2.5 / 10.0). PM2.5 is also referred to as fine dust (2.5 micrometers is one 400th of a millimeter). A 3-color display facilitates the quick recognition of the approximate air condition.Filter change indicatorThis will indicate to you when it is necessary to replace one or more filters.Stable housingVery robust and with a high-quality and appealing design.parental controlsSuitable to avoid unintentional adjustment of the settings.MiscellaneousThe device works with one (1) HEPA filter plus one (1) activated carbon filter plus one (1) filter combination. Depending on the area of use, the filters last up to one year.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have established an excellent reputation for high-quality air purifiers in recent years. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc.usage examplesHealthier Climate: Create a healthier environment and thus a more noticeable well-being.Odor elimination & tobacco smoke removal: Not only is the unpleasant smoke from cigarettes, pipes, cigars, etc. quickly absorbed and neutralized, but nicotine also has less chance to settle and turn from white to yellow.Fine dust and exhaust removal: Protects against many toxic substances in the air, to which you are particularly exposed in large cities and on highways.Asthmatics & Allergy Sufferers: Particle sizes AIRCENTER RemarkIt is therefore advisable to read the operating instructions before use in order to make the most of the various functions. After just a few minutes, everything will be clear and you will have a lot of enjoyment with the device.Regarding cleaning effectiveness against the Corona virusCoronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).HEPA filter of category H13 (as in this device) cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The H13 filter therefore captures the aerosols and cleans the air of COVID-19 viruses. The integrated ionizer is capable of significantly enriching the air with anions. Anions encapsulate viruses in the air and neutralize them. Therefore, the combination of H13 and ionizer means that the H600A can significantly reduce the concentration of viruses in the air. For risk reduction, for example, in waiting rooms, classrooms, offices, or in the hospitality industry, the device is very effective and recommended. Technical data Tension 220 - 240V / 50Hz Max. Power Consumption 145 W (0.7 A) air circulation Level 1: 90 m³/h Level 2: 225 m³/h Level 3: 380 m³/h Level 4: 475 m³/h Level 5: 540 m³/h  operating noise   Night mode: 40 dB(A) Level 1: 42 dB(A) Level 2: 53 dB(A) Level 3: 59 dB(A) Level 4: 63 dB(A) Level 5: 66 dB(A) Recommended room size  max. 70m² (resp. 170 m³) Masse (H/B/T) 850 x 450 x 420 mm Weight 22 kg guarantee 2 years

Learn more More Fewer

The Oasis dehumidifiers are among the widely used drying devices that have been successfully employed on construction sites and by private users for many years. The devices have now been revised and adapted to the latest state of technology with the newest environmentally friendly refrigerant R290 and improved efficiency. The Oasis D165 is suitable for basements and rooms up to 90m² and comes standard with a large bucket as well as a direct hose connection.Although visually very similar, the D165 dehumidifier has been completely revised in various respects compared to its predecessor:• improved efficiency• higher dehumidification performance• environmentally friendly refrigerant R290• improved automatic self-defrosting, thus usable down to 5°C (previously: 8°C)• reinforced front cover with spark guard bowl• reinforced, load-bearing wheelsThe dryer stands on 4 wheels but can also be mounted on a suitable wall bracket available from us if desired. The air intake area is at the back, where a filter cleans the moist air. The filter itself is easy to remove and clean. The dry air is blown out towards the front into the room. The Oasis is therefore ideal for general moisture control in a classic basement environment, for example in new buildings, but also for unattended continuous operation in temperature-controlled archives and on construction sites. For active laundry drying, the blower is rather too weak.The target humidity is regulated via a stepless hygrostat on the front. Once the set value is reached, the dehumidification operation pauses (the ventilation also stops) until the humidity rises again. The operation continues with the unchanged setting even after a power interruption. The D165 is therefore also suitable for operation with a timer, if you want to run the dryer, for example, only during off-peak hours. Thanks to the pipe evaporators, the D165 extracts water from the air even in low humidity ranges.The water is collected in the tank pushed in at the back, a float mechanically interrupts operation when full. Alternatively, a hose can be screwed onto the condensate collection tray (with a coupling / 3/4-inch thread), with the hose needing to have a slope towards the drain (no pump integrated in the device).usage examplesCellar Moisture: Ideal for damp cellars, old walls, and laundry rooms. Eliminates musty odors, stops mold growth, decomposition of masonry, and much more.Construction and Industrial Dryers: thanks to their handy, robust design, they are ideally suited for drying on construction sites and in the industry.Drying of Water Damage: The Oasis removes water from the air even in deep moisture areas through the pipe evaporators. This significantly accelerates the drying of water damage.dehumidification performanceThe dryer can be used thanks to hot gas defrosting over a wide temperature range from +5°C to +32°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:  30°C/80% r.H.: 28 liters / 24 h27°C/60% r.H.: 16.8 Liters / 24 h20°C/60% r.H.: 10.8 Liters / 24 h10°C/70% r.H.: 5.3 Liters / 24 h(r.H.=relative humidity)    Massive improvement regarding environmental compatibilityThe GWP (Global Warming Potential - impact on global warming) could be reduced by a factor of 800 (!) from 1430 (R134a) to less than 2 (R290). Furthermore, the D165 requires 10% less electricity while simultaneously increasing dehumidification performance by 14% (at room temperature 20°C, 60% r.H.). Technical data  Tension 230V / 50Hz Power consumption max. 360W Sound pressure level 1 m distance 54 dB(A) (our measurement) 2.5 m distance 51 dB(A) (our measurement) dehumidification performance max. 28 liters/day (30°C / 80% r.H.)  Bucket Capacity 9 liters, approx. 8 liters until operation interruption by float Compressor Rotary compressor  refrigerant R290 (150gr.) Dimensions (H x W x D)   60 x 38 x 36 cm (incl. wheels) Weight 23.5 Kg cessation of operations Hygrostatrad   Ambient temperature 5°C ~ 40°C  Area of application about 90m² Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years    

Learn more More Fewer

The air purifier HL 400 is a mobile air filtration device. Air is drawn in from the environment and passed through a 7-stage filtration system. The design air purifier filters viruses, bacteria, odors, pollen, and dust. With the help of the filtration system, the room air is filtered and pollutants are captured. The standard filter box consists of a pre-filter, cold catalyst filter, activated carbon filter, antibacterial filter, main filter H10 (according to EN 1822), sterilizing UV-A light, and ionization.      The HL 400 V with virus filter box (including certified H14 filter) additionally reduces the concentration of viruses (such as the current coronavirus) and bacteria. Stages of the filter system:   1st stage: prefilter"An aluminum filter is used as a pre-filter. The pre-filter filters coarse dust particles larger than 5 micrometers, such as household dust, flakes, and pollen. The filter can be rinsed with water and is therefore reusable. HEYLO recommends replacing the pre-filter annually."   2nd + 3rd level: cold catalyst filterThe catalytic decomposition reaction of the cold catalyst does not require UV rays, high temperatures, or high pressure. Under normal temperature conditions, the catalytic reaction can remove formaldehyde, benzene, xylene, TVOC, and other harmful gases. The reaction produces water and carbon dioxide. It does not lead to secondary pollution. It is a safe and environmentally friendly product that is state-of-the-art, suitable for a healthy home. During the catalytic reaction, the cold catalyst itself is not directly involved in the reaction. Its functionality does not change and is not lost. For this reason, a lifespan of about 5 years can be expected. Effective formaldehyde filterThe formaldehyde filter with activated carbon cleans the air of unwanted odors, gases, and substances. Additionally, it cleans the air in the shortest time from health-hazardous formaldehyde. The substances are absorbed by the activated carbon, and when the filter is saturated, it must be replaced. HEYLO recommends this every 6 months.In cases of strong odor pollution, such as cigarette smoke, a more frequent change may also be advisable.   4th + 5th level: Antibacterial cotton filterThe antibacterial filter is a precision filter that filters particles with a diameter of 5 micrometers. The special filter material is also treated with an antibacterial agent that can effectively kill 99% of all bacteria. High-efficiency EPA filter (particulate filter)The EPA filter filters air germs, smoke, and dust particles up to 1 µm in size with a rate of 99% or more. In combination with the multifunctional filter, the EPA filter can filter out microscopic particles with a diameter of more than 20 nanometers, including bacterial mold, dust, allergens, and some viruses. According to the World Health Organization, the coronavirus, avian influenza virus, influenza virus, and Legionella bacteria are larger than 20 nanometers.   6th level: Sterilizing UV LightUV sterilization with 365 nanometer UV wavelength light can kill a variety of airborne bacteria. The UV disinfection lamp is typically used for air, surface, and water disinfection. It can purify the air, eliminate musty odors, and produce a limited amount of anions. This makes the air fresh and prevents the spread of viruses in the air or on surfaces.   7th level: ionizationBy creating strong electric fields, ionizers can electrically charge individual air particles, thereby increasing the ion concentration in the room air. The charged particles are more reactive and can destroy odor molecules and other pollutants. At the same time, oppositely charged particles attract each other and form larger clumps that sink to the ground more quickly and can be more easily filtered from the air. "Questions & Answers on the topic of filters and filter changes can be found in our FAQs on filters for air purifiers."   Reduce pathogens in the air In untreated indoor air, numerous pathogens are usually found. This group includes mold spores, bacteria, animal hair, and especially house dust allergens (mite feces, excretions), but also heavy metals, soot, and mineral fibers. Particularly on warm days or during the heating season, large amounts of these suspended particles develop and are stirred up with the house dust in the indoor air. After being inhaled, the particles come into contact with our mucous membranes and trigger the known allergy symptoms. The HEYLO air purifier HL 400 can significantly reduce the concentration of these particulates and gases to create healthy indoor air. The device is used in the following areas: private residences, office spaces, conference and training rooms, schools and authorities, practices and fitness centers. In all areas where people are present, air purifiers can significantly improve air quality.  Technical Data (with Standard Filter Box) - HL 400Article Number: 1960006Ventilator air output max. (m³/h): 520Max. air performance (m³/h) with M-class filter: 360Electrical connection (V / Hz): 230 / 50Power consumption (kW): 0.09Current consumption (A): 0.4Length / Width / Height (mm): 200 / 400 / 600Weight (kg): 9.7Sound level (dB(A) / 3 m): 32 - 44Protection class (IP): XORoom size with 3-fold air exchange (approx. m²): 50Room size with 5-fold air exchange (approx. m²): 30

Learn more More Fewer

Ozone Generator WDH-AP001with 1000 mg/h (1 g/h) ozone outputThis small professional ozone generator is ideal for odor neutralization (e.g. smoke odor, decay odor, toilet odor, treatment of car interiors). It impresses with its good price-performance ratio and its ease of use.The ozone tubes represent the latest technology in ozone generation with a very long lifespan. The device itself is manufactured to be very robust.WDH is a quality product or brand that is almost exclusively available through specialized retailers. WDH air conditioning units have made an excellent name for themselves in recent years for high-quality devices. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc.  Characteristics • Ozone emission of 1000 mg/h (1 g/h) • Equipped with very durable ozone tubes• Continuous operation possible • Stainless steel frame with carrying handle• Low power consumption of only a maximum of 110 wattsImportant Safety Instructions The device may only be operated by qualified personnel who are well acquainted with the effects and application of ozone or have acquired this knowledge through training. Legal regulations must be observed during operation. Ozone is a toxic gas and oxidizing agent at higher concentrations (above 0.1 ppm or 0.2 mg ozone/m³) and is classified as dangerous and harmful to health! Precautions must be taken to prevent uncontrolled release of ozone. Ozone attacks natural rubber, latex, and plants and poses a risk to people and animals. We recommend using this device only for odor neutralization that is not due to harmful organisms.   Technical data  Tension 220V-240V / 50Hz Power consumption 110W max. (05.A) Ozone output (optimal) 1.000 mg/h (1 g/h) Max. Ozone Concentration  15-25 mg/l water resistance IPx0 Dimensions (H x W x D) 26 x 14.5 x 30 cm Weight 3.2 Kg Area of application 5°C - 40°C / max. 75 % r.H. Swiss plug Yes guarantee 2 years

Learn more More Fewer