The new WT230D is a successful evolution of its predecessor model WT230U. It is slightly more powerful in dehumidification performance and is clearly among the best in terms of efficiency with significantly lower consumption. An ideal device for single-family homes in combination with a tumbler.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 7m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted.Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the lower part are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 18 m² Drying performance: 1.63 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 660W or 420W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 59 dB(A) 2.5 m distance 67 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 35.5 liters / 24h (power consumption: 569 W) at 27°C / 60% r.H. = 21.1 liters / 24h (power consumption: 487 W) at 20°C / 60% r.H. = 14.6 liters / 24h (power consumption: 420 W) at 10°C / 70% r.H. = 6.1 liters / 24h (power consumption: 368 W) air circulation volume: 750 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

Those who like their laundry to dry faster will find the WT 240D to be a good and powerful device. The WT240 is the most economical of the new WT series from Aerial. A reliable helper for frequent use in the laundry room.Operation The easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 8m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  Mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as a 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request. Important:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 20 m² Drying performance: 1.93 Kg/h Consumption per kg of laundry:   0.26 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 620W or 440W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 62 dB(A) 2.5 m distance 68 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 36.5 L/24h (Power consumption: 570 W) at 27°C / 60% r.H. = 21.6 L/24h (Power consumption: 500 W) at 20°C / 60% r.H. = 16.8 L/24h (power consumption: 440 W) at 10°C / 70% r.H. = 7.2 L/24h (power consumption 390 W) air circulation volume: 830 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The WT 250D is suitable not only for intensive drying tasks in single-family operations but also meets performance expectations in drying rooms shared by multiple parties. With a drying capacity of approximately 3 kg of laundry per hour, this model dries in about 2.5 hours, which is what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 9m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 35 m² Drying performance: 2.95 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 950W or 677W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 61 dB(A) 2.5 m distance 68 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 57.1 Ll/24h (Power consumption: 570 W) at 27°C / 60% r.H. = 24.1 L/24h (Power consumption: 500 W) at 20°C / 60% r.H. = 23.0 L/24h (Power consumption: 440 W) at 10°C / 70% r.H. = 13.4 L/24h (Power consumption: 390 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 42 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The heavy-duty worker among the new Aerial WT dryers! It is specially designed for intensive use and dries laundry quickly and reliably with easy operation. With a drying capacity of approximately 3.6 kg of laundry per hour, this model dries in about 2 hours what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan levels: The WT280 has one (powerful) fan level. This provides quick drying results, even with a lot of laundry and long drying rooms of up to about 10m.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.    mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable trolleys in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 40 m² Drying performance: 3.68 Kg/h Consumption per kg of laundry:   0.29 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 1350W or 950W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 2.5 m distance 67 dB(A)   Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 79.2 L/24h (Power consumption: 1390 W) at 27°C / 60% r.H. = 46.6 L/24h (Power consumption: 1080 W) at 20°C / 60% r.H. = 32.2 L/24h (power consumption: 990 W) at 10°C / 70% r.H. = 20.3 L/24h (Power consumption: 800 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 43 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

High-quality dehumidifier for space-saving wall mounting, ideal for up to 30m². It is compact, quiet, and economical. Its high-quality stainless steel housing combines aesthetic demands with a long lifespan.  A special feature of this dehumidifier is the slanted louvers. They allow the air to be released at the front of the device without drafts. This guarantees quiet operation with a noise level of only 46 dB. The air intake is located on the left side via an easily removable air filter, and the outlet of the dry air is on the front side. "In particular, in busy areas such as changing rooms and wellness areas, smaller fitness rooms, etc., the low noise level and draft-free air circulation are of great advantage."In contrast to the AD110 model, the 110P features a built-in pump that can discharge the condensate upwards and outwards, for example into a sink, into a higher or further away drain.The new digital control is easy to understand and displays the temperature, actual and target humidity, as well as the operating hours digitally.The assembly is quite simple: a support rail is screwed to the wall, and the dryer itself can then be easily hung in it. Rail, screws, and dowels are already included in the delivery.   latest technologyThanks to the latest technology, it is highly efficient and economical. The refrigerant R1234rf has minimal environmental impact. Thus, the "Global Warming Potential (GWP)" is an incredible value of 4, which corresponds to a reduction of 99.5% compared to comparable models from previous generations.  Characteristics Compact and space-saving Incl. wall mount Automatic pump with overflow protection New, environmentally friendly refrigerant Edelstahlhaube BlueDry technology for particularly energy-saving operation – even at low humidity and temperatures. Intelligent e-Dry Control operating hour meter Display of target and actual moisture For corporate clients: available upon request with a robust plastic housing in a color of your choice and with company logo, quantities and price upon request.  Dehumidification performance / Power consumption at 30°C / 80% r.H. = 15 liters/day / 330 wattsat 20°C / 60% r.H. = 8.5 liters/day / 236 wattsat 15°C / 70% r.H. = 8 liters/day / 215 watts    Technical data   Tension 230 V / 50 Hz Power consumption max. 330W or 236W at 20°C/60% r.H. operating noise 1 m distance 46 dB(A) (our measurement) dehumidification performance 15 liters/day (30°C / 80% r.H.) amount of recirculated air 225 m³/h condensate tank integrated condensate pump, no tank hose connection Yes, 3m mounted on the device (12mm inner diameter) refrigerant R1234yf Weight 18.5 kg Masse (H x B x T) 49 x 33 x 28 cm cessation of operations Digital Ambient temperature 3°C ~ 32°C Plug Cable with Swiss plug T12 Area of application up to 30m² / 70m³ (temperature-controlled rooms) Ambient temperature 3°C ~ 32°C operating hour meter Yes Protection class IP54 guarantee 2 years

Learn more More Fewer

The AD20 is a robustly built condensation dryer. It is lightweight, portable, and can be carried like a suitcase. Thanks to the BlueDry technology, the AD20 reliably dehumidifies even at low humidity and temperature. Another advantage is the built-in automatic condensate pump with overflow protection (pumping height up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Robust housing made of impact-resistant plastic. It is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used to connect additional devices.Features and Benefits• Housing: made of robust, impact-resistant, and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Automatic water pump with overflow protection integrated as standard.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other.  Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 18.0 liters / 24h (Power consumption: 350 W)27°C / 60% r.H. = 11.0 liters / 24h (Power consumption: 310 W)20°C / 60% r.H. = 9.0 liters / 24h (Power consumption: 260 W)10°C / 70% r.H. = 5.0 Liters / 24h (Power consumption: 215 W)(r.H.=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption:  max. 350W Sound pressure level:  1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification capacity: max. 18.0 liters / day (30°C / 80% r.H) bucket / pump No bucket. Integrated pump with overflow protection, 4 m delivery height. Recirculation air volume level 1/2 200 / 270 m³/h refrigerant:   R1234yf Dimensions (H/W/D):      420 / 320 / 500 mm Weight:    16.4 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug:  Yes   Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The VP3 sound boxes are suitable for intensive use in water damage drying. They generate pressure, which can be used equally for suction and blowing. They operate with air-cooled side channel blowers in a robust AERCUBE housing.Thanks to various grip and carrying options, the devices have excellent handling characteristics. A securing system provides additional stability during transport or storage. Features and Benefits Air-cooled side channel blower, vibration-damped mounted 1100 W motor power For drying areas of approximately 30 – 50 m² Intelligent E.DRY electronics with full text display Bar graph and multicolored LED for reading the back pressure "Operational and kWh meters readable without power" Very quiet through highly efficient sound insulation technology Easy-to-open safety quick releases Diverse grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder   All AERCUBE system components are 100% compatible and stackable with each other.Aerial "eDRY®" for efficient dehumidificationThe prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of room humidity.The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1100W max. Insurance: 10A air volume flow 150 m³/h Sound pressure level: 3 m distance max. 48 dB(A) Max. differential pressure Vacuum: 170 mbar Pressure: 190 mbar Weight: 15 Kg Dimensions H x W x D: 507 x 390 x 455 mm control panel: • Electronics with full-text display for showing the device status. • Bar graph and LED for reading the back pressure. • Display: Operating hours • On/off switch • Device socket with fuse (max. 8 A) • 2-fold temperature monitoring • Safety shutdown in case of overload • calibrated energy meter (MID-compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years

Learn more More Fewer

The VP6 sound boxes are suitable for intensive use in water damage drying. They generate pressure, which can be used equally for suction and blowing. They operate with air-cooled side channel blowers in a robust AERCUBE housing. Thanks to various grip and carrying options, the devices have excellent handling characteristics. A securing system provides additional stability during transport or storage.  Features and Benefits Air-cooled side channel blower, vibration-damped mounted 1280 W motor power For drying areas of approximately 50 – 70 m² Intelligent E.DRY electronics with full text display Bar graph and multicolored LED for reading the back pressure "Operational and kWh meters readable without power" Very quiet through highly efficient sound insulation technology Easy-to-open safety quick releases Diverse grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder All AERCUBE system components are 100% compatible and stackable with each other.Aerial "eDRY®" for efficient dehumidificationThe prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of room humidity.The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional dehumidifiers and dryers for commercial and private use. Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1280W max. Insurance: 10A air volume flow Level 1: 80 m³/h up to 15m²Level 2: 140 m³/h up to 30m²Stage 3: 190 m³/h up to 50m²Stage 4: 250 m³/h up to 70m² Sound pressure level: 1 m distance max. 61 dB(A) (Night mode: 57 dB(A)3 m distance max. 57 dB(A) (night mode: 54 dB(A) Max. differential pressure Vacuum: 220 mbarPressure: 270 mbar Weight: 15 Kg Dimensions H x W x D: 507 x 390 x 455 mm Operating temperature: 0°C to +38°C control panel: • Electronics with full-text display for showing the device status.• Bar graph and LED for reading the back pressure.• Display: Operating hours• On/off switch• Device socket with fuse (max. 8 A)• 2-fold temperature monitoring• Safety shutdown in case of overload• calibrated energy meter (MID-compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years Documents / Downloads   User Manual German  User manual French

Learn more More Fewer

The AD40 is versatile and so lightweight that it can be carried like a suitcase. Thanks to the BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperature.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Water bucket or optional pumpThe water collection container (6.8 liters) is easy to remove, carry, and empty. It is located inside, with the water level of the bucket measured by a float. When full, it automatically interrupts operation, and operation automatically restarts when the bucket is replaced. An optional matching pump kit is available, which is versatile and suitable for unattended continuous operation.Robust housingThe housing is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used for connecting additional devices. Four robust, stable plastic feet for floor placement. Stackable with other Aerial Aercube devices.Characteristics  • Case: made of robust, impact-resistant, and UV-resistant plastic, lightweight. Fixed points for AERCUBE® lashing system. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Optional pump kit available.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other. Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H = 35.0 Liters / 24h (Power consumption: 520W) 27°C / 60% r.H. = 22.0 Liters / 24h (Power consumption: 430W) 20°C / 60% r.H. = 15.0Liters / 24h (Power consumption: 370W) 10°C / 70% r.H. = 8.0 Liters / 24h (Power consumption: 300W)(r.H.=relative humidity)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 530W Sound pressure level:  1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification capacity: max. 35.0 liters / day (30°C / 80% r.H) Bucket: Capacity 6.8 liters, Operational interruption due to swimmer Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant:   R407C Dimensions (H/W/D):      580 / 390 / 450 mm Weight:    25 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug:  Yes   hose connection:  Connection fitting for direct hose connection Optional Pump Kit Operating hour meter: Yes Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

The silencer "SD2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system and reduces operating noise by up to 19 dB(A), which can be particularly helpful in inhabited properties. Additionally, an optional activated carbon filter can be inserted into the housing to reduce odors.Advantages and Features • Reduces operating noise by up to 19 dB • Reduces odors when using the optional activated carbon filter • Suitable for Ø 38 mm and Ø 50 mm hose systems • Ready for connection with up to 270 m³/h air throughput • Easy-to-open safety quick releases • Diverse grip and carrying options • Robust AERCUBE housingThe SD2 does not require its own power connection. It is suitable for continuous operation and can be combined with all elements of the Aercube system. All AERCUBE system components are 100% compatible and stackable with each other. Technical data Tension: requires no power Air flow: bis 300m³/h Weight: 6 Kg Dimensions H x W x D: 300 x 390 x 490mm Operating temperature: -10°C - +40°C Guarantee: 2 years, housing 5 years

Learn more More Fewer

The HEPA filter system "HF2" is an element of the Aerial-Aercube series. Using a G4 class pre-filter and a HEPA filter H13, it cleans the drawn-in air with a purity rate of nearly 100%. Particularly in dusty construction environments and during mold remediation, it effectively cleans the air and prevents stirred-up dust, spores, or viruses* from spreading within the building. It is suitable for continuous operation and can be combined with all elements of the Aercube system.A sensor measures the degree of contamination of the filters and automatically reports via an LED display on the front of the housing when they need to be changed. The HF2 does not require a power connection itself, but operates solely with the airflow from the supplying devices. The LED display is therefore powered by a CR2032 battery (round flat battery). The charge status of the battery can be queried at any time by pressing a button.Thanks to two safety quick-release fasteners, the device can be opened quickly and the filters can be easily changed. The filters are disposable products and can be reordered individually.Features and Benefits• Efficient filter system with built-in H13 HEPA filter and G4 pre-filter• LED display informs about dirty filters• Suitable for Ø 38 mm / Ø 50 mm hose systems• Ready for connection with up to 270 m³/h air flow rate• Easy-to-open safety quick-release fasteners• Diverse grip and carrying options• Robust AERCUBE housing• Battery check at the push of a buttonAll AERCUBE system components are 100% compatible and stackable with each other.    Please noteThe shape and design of the pre-filter and HEPA filter were changed a few years ago. Please pay attention to the version that fits your device (round / square) when reordering replacement filters.   *Regarding cleaning effectiveness against the Corona virusCoronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the filter's purity rate.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The HEPA filter thus captures the aerosols and cleans the air of COVID-19 viruses. "Of course, there is no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated through touch. However, for risk reduction, e.g., in waiting rooms, classrooms, offices, or even in private settings, the device is very effective and recommended."  Technical data Tension:   does not require a power connection. LED display is powered by a round flat battery CR2032. Air flow: up to 270m³/h Weight: 6 Kg Dimensions H x W x D: 300 x 390 x 490mm control panel: LED display for filter change Taste "Battery Check" Guarantee: 2 years, housing 5 years

Learn more More Fewer

This power distributor records the energy consumption of up to four connected devices using a calibrated energy meter (MID). It was designed to fit the Aerial Aercube drying system and can thus be integrated stacked on it. The CC 4 MID box has been developed for use in construction and water damage drying, offering numerous advantages. The version available for order here is a special version for Switzerland with suitable, standard plugs T12 and sockets T13 (10A).  Features and Benefits   • Extremely robust housing• Protection class IP 44 • Calibrated MID-compliant energy meter• 16 A fuse• residual current device• Number lock included• After installation, there is no access to the internal• More stack sockets possible• Connection of max. 4 consumers• Integrated cable guides in the housing• 4.5 m cable length• Site-compatible power cableFor drying companiesAvailable in your desired color and with your logo upon request.All AERCUBE system components are 100% compatible and stackable with each other.

Learn more More Fewer

A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs.   The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.)  Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H / W / D):      690 x 390 x 470 mm Weight:    32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The Aerial AD 750 is a very powerful, robustly built dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. The AD750 features a robust housing made of impact-resistant plastic, stable guide rails, and side wheels for easy mobility on the floor. The dryer can even be pulled over stairs with these wheels. However, when used as a construction site dehumidifier, attention should be paid to the weight; 2 people are required for relocating it between floors or construction scaffolding.The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Fan motor with winding protection.• Compressor: Fully hermetic rotary vane compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter drier. Service connection on the suction side.• Self-defrosting: Automatic hot gas defrost controlled by DryLogic.• Collection container: 12 liters, with automatic full level shut-off.• Hose connection: Fitting (15 mm) for direct condensate drainage.• Hygrostat: Hygrostat rotary knob• operating hour meter• 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing.• Stackable  designsThere are two versions of the AD750: with a bucket without a pump or with a pump without a bucket. Please select the desired model. dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +32°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions: at 30°C / 80% r.H. = 55.0 liters / day (power consumption: 900 W)at 27°C / 60 % r.H. = 34.1 Liters / Day (Power consumption: 780 W)at 20°C / 60% r.H. = 24.5 liters / day (power consumption: 660 W)at 10°C / 70% r.H. = 14.0 Liters / Day (Power consumption: 560 W)   Technical data Tension: 230V / 50Hz Power consumption:  max. 900W (10A) / 660W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 53 dB(A) (manufacturer's specification) Dehumidification capacity: 55 liters/day (30°C / 80% r.H.)  air circulation volume: 710 m³/h (measurement installed) condensate tank: approx. 12 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H/W/D):      88 x 52 x 49.5 cm Weight:    42 Kg Business closure: Hygrostatrad Ambient temperature: 3°C ~ 32°C (40 - 95% r.H.) Application area: up to 600m³ (temperature-controlled rooms) resp. 400m³ (unheated) Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

Powerful, robustly built dehumidifier for construction sites and industry with integrated pump. The powerful blower facilitates a wide-area exchange of humid and dry air.   The AD750 features a robust housing made of impact-resistant plastic, stable guide rails, and side wheels for easy mobility on the floor. The dryer can even be pulled over stairs with these wheels. However, when used as a construction site dehumidifier, attention should be paid to the weight; 2 people are required for relocating it between floors or construction scaffolding.The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Fan motor with winding protection.• Compressor: Fully hermetic rotary vane compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter drier. Service connection on the suction side.• Self-defrosting: Automatic hot gas defrost controlled by DryLogic.• Collection container: 12 liters, with automatic full level shut-off.• Integrated condensate pump: Delivery height up to 4m, additionally direct hose connection (nozzle 15 mm) for direct condensate drainage into floor drain.• Hygrostat: Hygrostat rotary switch• operating hour meter• 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing.• Stackable  designsThere are two versions of the AD750: with a bucket without a pump or with a pump without a bucket. Please select the desired model. dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +32°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions: at 30°C / 80% r.H. = 55.0 liters / day (power consumption: 900 W)at 27°C / 60 % r.H. = 34.1 Liters / Day (Power consumption: 780 W)at 20°C / 60% r.H. = 24.5 liters / day (power consumption: 660 W)at 10°C / 70% r.H. = 14.0 Liters / Day (Power consumption: 560 W)   Technical data Tension: 230V / 50Hz Power consumption:  max. 900W (10A) / 660W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 53 dB(A) (manufacturer's specification) Dehumidification capacity: 55 liters/day (30°C / 80% r.H.)  air circulation volume: 710 m³/h (measurement installed) condensate tank: 750P no bucket Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H/W/D):      88 x 52 x 49.5 cm Weight:    42 Kg Business closure: Hygrostatrad Ambient temperature: 3°C ~ 32°C (40 - 95% r.H.) Application area: up to 600m³ (temperature-controlled rooms) resp. 400m³ (unheated) Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935 features both an 8-liter condensate tank and a connection nozzle for direct drainage of the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 34.0 liters / 24h (Power consumption: 610 W)20°C / 60% r.H. = 16.5 liters / 24h (Power consumption: 450 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 610 W max. Sound pressure level 2.5 m distance 51 dB(A) dehumidification performance     34 liters/day (30°C / 80% r.H.)  condensate tank Approx. 8 liters   Air volume level 1 / 2 300 / 420 m³/h (Night mode: 300 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   860 x 392 x 508 mm   Weight 35.4 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935S features both an 8-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically detects the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. The air is expelled through two Ø100mm nozzles, which blow the air into the room at a good speed. Air hoses can also be attached to these nozzles if the dry air needs to be directed precisely to a specific location. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 28.0 liters / 24h (Power consumption: 785 W)20°C / 60% r.H. = 13 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 1-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Equipped with a 1kW electric heating element and 2x Ø100mm duct connections• Maintenance and service friendly     Technical data  Tension 230V / 50Hz Power consumption 785 W max. (1785 W with additional heating) Recording supplementary heating  +1000W  Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     28 liters/day (30°C / 80% r.H.)  condensate tank Approx. 8 liters   air volume 400 m³/h  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   860 x 391 x 505 mm   Weight ca. 36 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-955 features both a 13-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 53 liters / 24h (Power consumption: 830 W)20°C / 60% r.H. = 22.5 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 830 W max. Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     53 liters/day (30°C / 80% r.H.)  condensate tank Approx. 13 liters   Air volume level 1 / 2 290 / 550 m³/h (Night mode: 290 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   845 x 452 x 538 mm   Weight 41.8 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.Due to its high dehumidification performance, the AD-975 is equipped with a water pump as standard. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Standard equipped with pump set, no bucket• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 76 liters / 24h (Power consumption: 1070 W)20°C / 60% r.H. = 34.5 liters / 24h (Power consumption: 785 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 1070 W max. Sound pressure level 2.5 m distance 64 dB(A) dehumidification performance     76 liters/day (30°C / 80% r.H.)  water pump standard (no bucket), lift height 4 m Air volume level 1 / 2 750 / 900 m³/h (Night mode: 750 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   906 x 502 x 547 mm   Weight 48.3 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.Due to its high dehumidification performance, the AD-995 is equipped with a water pump as standard. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Standard equipped with pump set, no bucket• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 95 liters / 24h (Power consumption: 1830 W)20°C / 60% r.H. = 46.5 liters / 24h (Power consumption: 1282 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 1900 W max. Sound pressure level 2.5 m distance 64 dB(A) dehumidification performance     76 liters/day (30°C / 80% r.H.)  water pump standard (no bucket), lift height 4 m Air volume level 1 / 2 750 / 900 m³/h (Night mode: 750 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   906 x 502 x 547 mm   Weight 58.2 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Compact adsorption dryer for versatile use in the drying of water damage or for keeping rooms dry with permanent moisture load. The mobile adsorbers of this type are also suitable for industrial applications where low air humidity is required, for example in production facilities.Adsorption dryers have a practically constant dehumidification performance regardless of the room temperature. They are therefore also suitable for use in cold environments, even below freezing point. In principle, the air is passed through a continuously rotating sorption rotor, which is a wheel made of a very moisture-absorbent material. The moisture absorbed by the rotor is expelled from the device by a heated (PTC heating) air stream flowing in the opposite direction (= regeneration air) and must be vented out of the room. The dry air is directed into the room or through hoses to the areas that need to be dried.serviceThe operation is incredibly simple: plug it into the socket, turn on the device with the toggle switch, and set the desired humidity level on the hygrostat. Adjusting the air volumes is not necessary.    Installation of the deviceThe dryer can optionally be placed outside the damp zone or in the room itself:Set up outside the damp area, the dry air is blown into the area to be dried using suitable hoses. The moist exhaust air either enters the room where the dryer is located or can also be discharged using hoses, for example, through a window to the outside. This setup is usually used for drying water damage in cavities, such as water damage under bathtubs or in water pits. When drying water damage in dense materials like underfloor drying, the dry air from the adsorption dryer is additionally pressurized with the help of compressors (e.g., with VP2-6 sound boxes from our range) and can thus be directed to hard-to-reach areas.The arrangement in the room itself is suitable when the entire air volume needs to be kept dry, usually in industrial or commercial applications. The dry air flows directly from the device into the room, while the moist exhaust air is led out of the room via a hose.  Rotor ECODRY G3-MH / PTC Heating ElementThe high-performance rotor is optimized for maximum water intake under varying entry conditions. The mechanical strength of the rotor's surface is extremely high. Non-flammable. The rotor is maintenance-free and washable. Dynamic, safe, and self-regulating PTC heating element.Characteristics • Stackable, quiet, maintenance-friendly • Energy efficient through ecoDRY rotor • Precisely adjustable with built-in hygrostat • Cost and duration control through combination meter for• Operating hours and kWh • Robust stand device with foldable carrying handle • 4 rubber buffers (abrasion-resistant and non-staining) on the underside protect sensitive floor surfaces • Air intake: process and regeneration air together• with air filter and silencer • Housing: Stainless steel / powder-coated steel sheet • Connection cable 4.5 m with power plug • PTC heating elements for maximum operational safety • Optional with calibrated power meterAir Inlet: Common air inlet for process and regeneration air at the front Ø = 125 through silencer and air filter. Air outlet: Dry air: rear side, Ø = 80 mm or 2 x Ø 50 mm, regeneration air: rear side, Ø = 80 mm    Technical data  Tension 1 x 230V / 50 Hz Power consumption 694W max. insurance 10A Sound pressure level 3 m distance 48 dB(A) dehumidification performance 18.75kg/Tag (20°C / 60% r.F.) Liters per kilowatt-hour = 1.13 l/kWh Kilowatt hour per liter = 0.89 kWh/l Airflow Process air volume: 210m³/h Regeneration air volume: 110m³/h Weight   14 Kg Ambient temperature -10°C ~ 35°C  ambient humidity 10 to 100% RH Swiss plug Yes   Guarantee: 2 years

Learn more More Fewer

The medium-sized ASE adsorption dryer from Aerial. Handy yet powerful, making it ideal for flexible use in drying water damage or for keeping rooms dry with permanent moisture exposure. The mobile adsorbers of this type are also suitable for industrial applications where low air humidity is required, for example in production facilities.Adsorption dryers have a practically constant dehumidification performance regardless of the room temperature. They are therefore also suitable for use in cold environments, even below freezing point. In principle, the air is passed through a continuously rotating sorption rotor, which is a wheel made of a very moisture-absorbent material. The moisture absorbed by the rotor is expelled from the device by a heated (PTC heating) air stream flowing in the opposite direction (= regeneration air) and must be vented out of the room. The dry air is directed into the room or through hoses to the areas that need to be dried.serviceThe operation is incredibly simple: plug it into the socket, turn on the device with the toggle switch, and set the desired humidity level on the hygrostat. Adjusting the air volumes is not necessary.    Installation of the deviceThe dryer can optionally be placed outside the damp zone or in the room itself:Set up outside the damp area, the dry air is blown into the area to be dried using suitable hoses. The moist exhaust air either enters the room where the dryer is located or can also be discharged using hoses, for example, through a window to the outside. This setup is usually used for drying water damage in cavities, such as water damage under bathtubs or in water pits. When drying water damage in dense materials like underfloor drying, the dry air from the adsorption dryer is additionally pressurized with the help of compressors (e.g., with VP2-6 sound boxes from our range) and can thus be directed to hard-to-reach areas.The arrangement in the room itself is suitable when the entire air volume needs to be kept dry, usually in industrial or commercial applications. The dry air flows directly from the device into the room, while the moist exhaust air is led out of the room via a hose.  Rotor ECODRY G3-MH / PTC Heating ElementThe high-performance rotor is optimized for maximum water intake under varying entry conditions. The mechanical strength of the rotor's surface is extremely high. Non-flammable. The rotor is maintenance-free and washable. Dynamic, safe, and self-regulating PTC heating element.Characteristics • Stackable, quiet, maintenance-friendly • Energy efficient through ecoDRY rotor • Precisely adjustable with built-in hygrostat • Cost and duration control through combination meter for• Operating hours and kWh • Robust stand device with foldable carrying handle • 4 rubber buffers (abrasion-resistant and non-staining) on the underside protect sensitive floor surfaces • Air intake: process and regeneration air together• with air filter and silencer • Housing: Stainless steel / powder-coated steel sheet • Connection cable 4.5 m with power plug • PTC heating elements for maximum operational safety • Optional with calibrated power meterAir Inlet: Common air inlet for process and regeneration air at the front Ø = 125 through silencer and air filter. Air outlet: Dry air: rear side, Ø = 80 mm or 2 x Ø 50 mm, regeneration air: rear side, Ø = 80 mm     Technical data  Tension 1 x 230V / 50 Hz Power consumption 1040W max. insurance 10A Sound pressure level 3 m distance 57 dB(A) dehumidification performance 25.70kg/Tag (20°C / 60% r.F.) Liters per kilowatt-hour = 1.05 l/kWh Kilowatt hour per liter = 0.97 kWh/l Airflow Process air volumes: 300m³/h Regeneration air volume: 110m³/h Weight 18 Kg dimension 37 x 33.5 x 43 cm (including stubs and stand feet) Ambient temperature -10°C ~ 35°C ambient humidity 10 to 100% RH control panel On/Off switch, built-in hygrostat in the Air intake side, kilowatt-hour meter Swiss plug Yes guarantee 2 years

Learn more More Fewer

The ASE400 demonstrates high reliability in the drying of industrial spaces as well as public and water management facilities. Unlike condensation dryers, adsorbers have a more or less constant dehumidification performance down to well below freezing point. Since the condensate would freeze at these cold temperatures, the extracted moisture is evaporated through a hose and expelled from the room. In water damage drying, the ASE400 is also a powerful device for drying larger areas, ideally in combination with a turbine.Adsorption dryers operate without a compressor. Simply explained, the humid air is passed over a silica gel wheel and divided into dry air and humid air. The dry air is blown into the room but can also be directed via a hose into cavities such as shafts, substructures of bathtubs, etc., or into another device such as a compressor. On the other side of the dryer, the humid air exits, and this can also be discharged via a hose. "Heat is required for this process. The ASE400 features a high-performance rotor that is optimized for maximum water absorption under varying inlet conditions. The mechanical strength of the rotor's surface is extremely high. Non-flammable. The rotor is maintenance-free and washable. Dynamic, safe, and self-regulating PTC heating element."  Air intake rear: through wide air filter (can be removed for cleaning)Air outlet: Dry air front side: Ø = 100 mm, regeneration air back side Ø = 80 mmserviceThe ASE400 is ready to plug in. It has a toggle switch for turning on/off. Optionally, a hygrostat can be connected via the prepared plug to regulate the desired target humidity. The device is suitable for unattended continuous operation. Furthermore, the ASE has an operating hour counter as well as a counter that measures power consumption in kWh. Adjusting the air volumes is not necessary.Characteristics • Stackable, quiet, maintenance-friendly • Energy efficient through ecoDRY rotor • Precisely adjustable with built-in hygrostat • Cost and duration control through combination meter for• Operating hours and kWh • Robust stand device with foldable carrying handle • 4 rubber buffers (abrasion-resistant and non-staining) on the underside protect sensitive floor surfaces • Air intake: process and regeneration air together• with air filter and silencer • Housing: Stainless steel / powder-coated steel sheet • Connection cable 4.5 m with power plug • PTC heating elements for maximum operational safety • Optional with calibrated power meter        Technical data   Tension 1 x 230V / 50 Hz Power consumption 2200W max. insurance 10A Sound pressure level 3 m distance 60 dB(A) dehumidification performance 36kg/day (20°C / 60% r.H.) Liters per kilowatt-hour = 0.75l / kWh Kilowatt hour per liter = 1.33 kWh / l Airflow Process air volumes: 480 m³/h Regeneration air volume: 185 m³/h Weight 25 Kg Dimensions (H x W x D) 410 x 395 x 560 mm Ambient temperature -10°C ~ 35°C ambient humidity 10 to 95% RH control panel on/off switch kilowatt-hour meter Connection option for external control Swiss plug Yes guarantee 2 years

Learn more More Fewer

Pump Kit for AD 40   Condensate pump (optional accessory) for Aerial dehumidifiers. The pump kit is inserted into the housing at the back instead of the bucket and can be installed and removed with just a few hand movements. The power supply is connected via integrated connectors directly to the socket prepared in the device. Maximum delivery height 4 meters.   Important: the pumps vary in sizing depending on the model. When choosing the pump, pay attention to the correct model. Technical datadischarge head 4m

Learn more More Fewer