Condensate pump (optional accessory) for Aerial dehumidifiers. The pump kit is inserted into the housing at the back instead of the bucket and can be installed and removed with just a few hand movements. The power supply is connected via integrated connectors directly to the socket prepared in the device. Maximum delivery height 4 meters.   Important: the pumps vary in sizing depending on the model. When choosing the pump, pay attention to the correct model. Technical datadischarge head 4m

Learn more More Fewer

Pump kits for Aerial dehumidifier AD740   Condensate pump (optional accessory) for Aerial dehumidifiers. The pump kit is inserted into the housing at the back instead of the bucket and can be installed and removed with just a few hand movements. The power supply is connected via integrated connectors directly to the socket prepared in the device. Maximum delivery height 4 meters.   Important: the pumps vary in sizing depending on the model. When choosing the pump, pay attention to the correct model. Technical datadischarge head 4m

Learn more More Fewer

Condensate pump (optional accessory) for Aerial dehumidifiers. The pump kit is inserted into the housing at the back instead of the bucket and can be installed and removed with just a few hand movements. The power supply is connected via integrated connectors directly to the socket prepared in the device. Maximum delivery height 4 meters.   Important: the pumps vary in sizing depending on the model. When choosing the pump, pay attention to the correct model. Technical datadischarge head 4m

Learn more More Fewer

High-quality wall console in two sizes, suitable for Aerial dehumidifiers of the AD series AD420 / AD520. With protective edge and perforations in the base plate for precise hold as well as cutout for cable passage. Black powder-coated.

Learn more More Fewer

High-quality wall console in two sizes, suitable for Aerial dehumidifiers of the AD series AD430 / AD540. With protective edge and perforations in the base plate for precise hold as well as cutout for cable passage. Black powder-coated.

Learn more More Fewer

Hepafilter H13 (green core with grid)This filter is compatible with the Aercube Hepafilter System HF2 of the new generation and cleans the air with an almost 100% purity rate with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, viruses (including COVID19 viruses), and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements and workplaces that are affected by mold. The HEPA filter is considered consumable and cannot be washed.The white pre-filter G4 is not included in the delivery. It is recommended because it significantly extends the lifespan of the (more expensive) HEPA filter.Important: Pay attention to execution - round or squareThe round pre-filter available for order here is compatible with the HF2 systems of the new generation from the year of manufacture 2017 onwards. The round filters described here do not fit into the older devices (square filters).

Learn more More Fewer

Pre-filter (white casing ring)This pre-filter G4 is compatible with the Aercube Hepafilter system HF2 and cleans the air of coarse dirt with every pass through the device. The pre-filter is part of the consumables and can be washed and reused a few times depending on the type of contamination.Important: 2 versions round - squareThe round pre-filter available for order here is compatible with the HF2 systems of the new generation from the year of manufacture 2017 onwards. The round filters described here do not fit into the older devices (square filters).

Learn more More Fewer

HEPA Filter:This HEPA filter is compatible with the Aercube Hepafilter System HF2 of the first generations and cleans the air with a purity rate of nearly 100% with each pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, viruses (including COVID19), and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestation. The HEPA filter is considered consumable and cannot be washed.For models from the 2015/2016 vintage EN 1822 / 260x260x100mm / Index AThe suitable pre-filter F8 is available separately, please also note the complete sets.

Learn more More Fewer

This activated carbon filter fits the Aercube silencer system SD2 and reduces odors in the air with every pass through the device. The activated carbon filter can be inserted into the silencer if needed. It is not essential for the operation of the device and is considered consumable.

Learn more More Fewer

HEPA Filter H13 suitable for air purifier Aerial AMH100. The replacement is easy and occurs when the already installed filter can no longer fulfill its function.  Information on HEPA filtersThe term "HEPA" is the abbreviation of the English term "High Efficiency Particulate Air" and refers to air filters with high effectiveness against particles. HEPA filters are made of tightly woven, irregular fiber nets. They are capable of filtering the smallest particles while still being sufficiently permeable for use, for example, in air purifiers for private or commercial use. HEPA filters are defined as filters that remove at least 99.9 percent of all dust particles (larger than 0.1–0.3 micrometers) from the air. This includes airborne viruses, bacteria, fine dust, mite eggs, pollen, smoke particles, asbestos, as well as various toxic dusts and aerosols.Purity rate for particles with a size between 0.1 to 0.3 micrometers: filter class   separation efficiency     transmittance       H13 99,95% 0,05% H14 99,995%    0,005%         Regarding cleaning effectiveness against the Corona virus Coronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the purity rate of the filter. But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The HEPA filter captures the aerosols and also cleans the air of COVID-19 viruses.Of course, there is no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated by touch. However, for risk reduction, e.g., in waiting rooms, classrooms, offices, or even in private settings, the device is very effective and recommended.

Learn more More Fewer

Activated carbon filter suitable for air purifier Aerial AMH100. The replacement is easy and occurs when the already installed filter can no longer fulfill its function. Technical dataHeight 36.5 cm Width 35.5 cm Depth 2 cm 

Learn more More Fewer

HEPA Filter H13 suitable for air purifier Aerial AMH100. The replacement is easy and occurs when the already installed filter can no longer fulfill its function. Explanation of the different HEPA filters:HEPA-13, HEPA-14The HEPA stands for: High Efficiency Particulate Air – in German approximately: air filter with high effectiveness against particles.  This is how a HEPA filter worksThe construction of a HEPA filter is based on a dense mesh of fibers that filters out the smallest particles. The fibers in the filter mesh are not arranged regularly, as in a sieve, but are irregularly positioned. This results in varying distances between the individual fibers, sometimes large and sometimes small. HEPA filters remove particles from the air that are significantly smaller than the gaps between the fibers. The filtration occurs as the air flows past the fiber mesh: the small particles simply adhere to the fibers.  The filter standardFilters are standardized and classified into filter classes 1-17. The higher the number, the greater the filter capacity for the smallest particles. The filter classes H13 and H14 are referred to as HEPA filters. The filter classes U15 to U17 are high-performance particulate filters and are used for air filtration in clean rooms. HEPA filters are defined as filters that remove at least 99.9 percent of all dust particles larger than 0.1–0.3 micrometers from the air. This includes respirable dust, mite eggs and droppings, pollen, smoke particles, asbestos, bacteria, various toxic dusts, and aerosols. By the way, normal household dust is so large that it is already captured by the pre-filter of an air purifier. To have a better comparison, we will show you the filter metrics for particles with a size between 0.1 to 0.3 micrometers below: Filter class Separation degree Transmission degreeH13                  99,95%                  0,05%H14                  99,995%                0,005% Regarding cleaning effectiveness against the Corona virus:Coronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the filter's purity rate.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The HEPA filter captures the aerosols and also cleans the air of COVID-19 viruses. Of course, there is no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated by touch. However, for risk reduction, e.g., in waiting rooms, classrooms, offices, or even in private settings, the device is very effective and recommended. Technical dataHeight 36.5 cm Width 35.5 cm Depth 2 cm 

Learn more More Fewer

Hose connection plate made of robust metal for the disconnection of air hoses on the discharge side. Available in various sizes, suitable for Aerial Airmaxx fans. This hose adapter is available in 3 versions (same price for all models):Plate 100 = 3 fittings ? = 100 mm(suitable hose from our range: Thermaflex 100mm)Plate 50 = 6 Stubs ? = 50 mm(suitable hose from our range: PVC-Flextract 50mm)Plate 38 = 10 Stubs ? = 38 mm(suitable hose from our range: PVC-Flextract 38mm)

Learn more More Fewer

Hose connection plate made of robust metal for the disconnection of air hoses on the discharge side. Available in various sizes, suitable for Aerial Airmaxx fans. This hose adapter is available in 3 versions (same price for all models):Plate 100 = 3 fittings ? = 100 mm(suitable hose from our range: Thermaflex 100mm)Plate 50 = 6 Stubs ? = 50 mm(suitable hose from our range: PVC-Flextract 50mm)Plate 38 = 10 Stubs ? = 38 mm(suitable hose from our range: PVC-Flextract 38mm)

Learn more More Fewer

Air filter mat, suitable for Aerial Aercube AD20 dehumidifier.

Learn more More Fewer

Air filter mat, suitable for Aerial Aercube AD40 and AD740 (Article A000835) dehumidifier.Mass: 295 x 295 x 12mm

Learn more More Fewer

Luftfilter 210x240x12mm zu Luftentfeuchter AD110

Learn more More Fewer

"The edge area of the floor can be dried gently and efficiently using the edge joint nozzle. This means that no drilling needs to be done in the floor, thus preserving the surface covering. Suitable for 38 mm hose systems." Technical dataSuitable for hose inner diameter: 38 mm 50mm

Learn more More Fewer

"The edge area of the floor can be dried gently and efficiently using the edge joint nozzle. This means that no drilling needs to be done in the floor, thus preserving the surface covering. Suitable for 50 mm hose systems." Technical dataSuitable for hose inner diameter:50mm

Learn more More Fewer