This very reliable and powerful pump with a check valve can be used freestanding or directly built into the device. Additionally, wall mounting of the pump is possible, as there are two brackets on the back with which the pump can be attached to two screws on the wall.
The pump is suitable for condensate water, but not for dirty water. The water can be supplied to the pump via a maximum of 3 inlets and is pumped away through a thin 3/8-inch (10 mm) connection via a hose up to a maximum height of 4 meters (the hose is not included in the delivery). The pump comes with a cable with a three-pole Swiss plug (230V).
The check valve of the pump prevents the backflow of water from the outgoing hose. The condensate pump has a float that only activates the device when water has accumulated. It can therefore also be used when water is not continuously flowing in. There is also the possibility to connect the pump to the electrical circuit of a dehumidifier (construction dryer), so that the dehumidifier would turn off in the event of a pump failure (these works must be carried out by an electrician).
Examples of funding performance
At 0 m height: 360 liters per hour
At 2 m height: 240 liters per hour
At 4 m height: 192 liters per hour
Characteristics
• Check valve
• Three (3) inlet openings
• Easy installation
• Overheat protection
• Very quiet operating mode
• Stossfester Tank
• Compact design
