Description
Very powerful 22 kW version among the fan heaters! Solidly constructed heating blower with rack. High air circulation distributes heat widely in the room. The device is also suitable for continuous operation on construction sites and for heating large rooms, halls, and tents.
execution
• Thermostat for regulating and setting the desired temperature
• Two heating strengths selectable (1 = 11,000 Watts 2 = 22,000 Watts)
• Pure fan operation possible even without heating function
• Also suitable for continuous operation
• Overheating protection and protected against splashes and small foreign bodies (IP24)
• Stepless temperature control (0 ~ 40° C)
• Integrated protection mechanism against overheating, as well as reset function
• No interruptions during power failure (device continues from where it was interrupted)
• Very light mobility due to handy carrying handles
• The device is immediately ready for use (no installation or assembly required)
• No oxygen consumption, therefore also suitable for closed indoor spaces -> Maintain safety distances
• The plug is located directly on the device (CEE 32A), optionally available with a 10m cable (CEE32A Q6.0 mm)
What does the automatic reset function bring?
If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.
Miscellaneous
• A five-pole 32 A high-current connection 380 V / 415 V (50/60Hz) with CEE32A plug is required for the operation of this heating device.
• As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.
How much heat do I need?
Our free heat demand calculator helps you determine the required heating power for your rooms.
Technical data
Voltage: 400V / 50Hz
Power consumption: 3 levels Only ventilation / 11kW / max. 22kW
Maximum protection: 32 A
Room thermostat: 5 - 35°C
Air volume flow: approx. 2400 m³/h
Protection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection)
Operating noise: 1 m distance 58 dB(A) (our measurement)
Dimensions with rack (H / W / D): 63 x 55 x 38 cm
Weight: 22 kg
Operating mode: rotary knob
Application area: up to max. 220 m²
Stecker: CEE 32 A
Warranty: 2 years
Special: The plug is located directly on the device. Suitable cables are available from us in various designs.
