The new AD 520 has been specifically designed for professional use. The ultra-lightweight housings are particularly appreciated on construction sites and during water damage drying.Thanks to the latest technology, they are economical and can be used in temperature ranges close to freezing.
The water is collected in a standard 7-liter condensate container, where a float automatically interrupts operation when full. Furthermore, the water can be directly drained through the hose connection. The condensate hose can be directly attached to the water outlet without a coupling (for secure fixation, we recommend a clamp).Optional Pump Kit: An appropriate plug-and-play fully integrable pump kit is available as an addition, which allows the condensate to be transported to higher elevations or over greater distances. The pump kit can be easily removed at any time and replaced with a bucket.
The built-in operating hour meter clearly and quickly shows how long the device has been in use. The consumption meter provides information about the electricity consumption in kWh.
Characteristics
• Housing: Steel sheet coated in stainless steel look
• Setup: Four abrasion-resistant rubber feet for floor mounting
• Airflow: Air intake rear / Air outlet front
• Carrying handle: Sturdy foldable handle for carrying
• Wall mounting: Wall console optionally available
• Stackable: for transport and storage
• Air filter: Protects the device from dust
• Fan: 2-stage, energy-efficient EC fan
• Condensate drain: Water tank 7 liters with automatic shut-off when full and removal, hose connection
• Pump Kit: Flexibly usable pump kit for permanent condensate drainage (accessory)
• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures
• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.
• Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments..
• Suitable for unattended continuous operation
It is suitable:• as a construction dryer
• for dehumidification of basements, commercial spaces, industry up to 60m² and in case of water damage
• for unattended continuous operation
• for operation on a timer
The manufacturer company "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use. This dryer is also available in the larger version
AD540.
Aerial "eDRY®" for efficient air dehumidification
"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +34°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H.: 19 liters / 24h (Power consumption: 330 W)
27°C / 60% r.H.: 11 liters / 24h (Power consumption: 295 W)
20°C / 60% r.H.: 8 liters / 24h (Power consumption: 260 W)
10°C / 70% r.H.: 6 Liters / 24h (Power consumption: 210 W)
(r.H.=relative humidity)
