Kompakter Radiallüfter für Trocknungsprofis.  Dieser Radiallüfter wurde speziell für den gezielten Einsatz in der Hohlraumtrocknung, der schnellen Teppichtrocknung und der professionellen Wasserschadensanierung entwickelt. Er liefert eine hohe Luftleistung bei bemerkenswerter Kompaktheit und ist das ideale Werkzeug für Trocknungsexperten. Besondere Merkmale und Vorteile Trotz seines kraftvollen Motors und des laufruhigen Metalllaufrads besticht der Ventilator durch sein sehr geringes Gewicht und die kompakten Abmessungen. Extrem portabel: Dank des praktischen Griffs und des leichten Gewichts (3.2 kg) ist der Transport denkbar einfach. Flexible Positionierung: Das Gerät lässt sich in mehreren Positionen (0°, 45° oder 90°) aufstellen, um den Luftstrom optimal auf die Trocknungsfläche auszurichten. Sicherheit und Effizienz: Ein Überstromschutz gewährleistet mehr Sicherheit bei Überlast. Der integrierte geeichte MID-Energiezähler (kWh) ermöglicht die präzise und abrechnungsrelevante Erfassung des Stromverbrauchs. Servicefreundlich und Lagerung: Das Design ist sehr servicefreundlich, und die Bauweise erlaubt ein platzsparendes Stapeln mehrerer Geräte. Gezielter Luftstrom: Der flache Diffusor sorgt für eine effektive Verteilung der Luft. Einsatzgebiete Der Radiallüfter ist vielseitig einsetzbar in verschiedenen professionellen Umgebungen: Gewerbegebäude Bauwesen Industrie, Fabriken und Produktion Vermietung und Verleih (für Trocknungsgeräte) Wasserschadenbeseitigung Technische Daten Ventilator-Typ Radial Luftleistung 437 m³/h Pressung 120 Pa Lüfterstufen 1 Leistungsaufnahme max. 76 W Elektrischer Anschluss 230 V/1ph/50 Hz Schutzklasse IP22 Produktgrösse (L x B x H) 280 x 250 x 300 mm Gewicht 3.2 kg Garantie 2 Jahre

Learn more More Fewer

Der kompakte Turbolüfter TFV 30 S für Trocknungsprofis. Ideal zur Trocknung von Baustellen, Wasserschäden und Teppichen. Er zeichnet sich durch seine flexible Einsetzbarkeit und robuste Konstruktion aus. Das Gehäuse besteht aus unverwüstlichem Polyethylen, was es leicht und widerstandsfähig macht. Der TFV 30 S ist als Universalausrüstung für Sanierungs-, Reinigungs- und Handwerksunternehmen konzipiert. Die Kombination aus Robustheit, Leistung und kompakten Abmessungen macht ihn zur optimalen Wahl. Das Gerät kann in drei verschiedenen Aufstellwinkeln (0°, 45° oder 90°) betrieben werden und gewährleistet dabei in jeder Position einen sicheren Stand. Die Luftleistung ist dreistufig regulierbar. Ein besonderes Feature ist die integrierte Steckdose am Bedientableau zur Stromversorgung weiterer Geräte. Vorteile Zweiflutige Radialventilatoren mit extra grosser Spezial-Welle Alle inneren Bauteile aus Metall für maximale Stabilität Motor mit Qualitäts-Kugellager gegen einseitige Belastung Hohe Energieeffizienz: Leistungsstark und gleichzeitig sparsam Integrierte EU-Steckdose (kompatibel mit Schweizer Fixadapter) Technische Daten & Leistungsstufen Betriebsstufe Luftmenge Max. Luftdruck Schallpegel (3m) Verbrauch Stufe 1 1350 m³/h 370 Pa 73.5 dB(A) 0.71 kW Stufe 2 1880 m³/h 400 Pa 80.8 dB(A) 0.78 kW Stufe 3 2250 m³/h 525 Pa 86.2 dB(A) 1.05 kW Maximale Fördermitteltemperatur 60 °C Nennspannung / Stromaufnahme 230 V / 5,2 A Stromanschluss EU-Stecker mit Schweizer Fixadapter Abmessungen (L x B x H) 545 x 515 x 490 mm Gew Gewicht 16.5 kg Garantie 2 Jahre Hinweis: Der auf Produktbildern abgebildete 3er Verteiler und die Luftschläuche sind nicht im Standard-Lieferumfang enthalten.

Learn more More Fewer

In vacuum insulation layer drying, the use of a class H13 particulate filter is highly recommended to protect against mineral fiber dust, mold spores, and allergens in the air. This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It has been specifically designed for use with Trotec water separators and compressors and is characterized by optimal filter performance as well as a high separation efficiency. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominal > 99.97 % at 0.3 micrometer particle size. With 3 m² of filter area and 315 m³/h nominal air flow rate, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and provide performance reserves for combined use with up to two VE4S MultiQube or one VX5.  Optional filter class H14 "For an even higher purity rate, a filter of class H14 is optionally available (Item No. 7.160.000.223) with a separation efficiency of > 99.995 % at 0.2 micrometer particle size."  Hepacontrol Contaminated filters not only pose a contamination risk to the surrounding air, but they also have longer drying times and a risk of overheating.the compressor turbine as a result. Here, it offers even more safety compared to passive systems thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a used filter element, the warning light automatically turns on, clearly signaling the need for a replacement of the filter element. Hepacontrol does not require an additional power connection, as the supply of the bright warning LED is provided by an integrated and particularly long-lasting high-performance battery.  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  scope of delivery complete with housing and a filter element  Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h Number of hose fittings 4 x 38 mm (Rubber adapter available in 50 mm optional) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6.100.000.043 guarantee 2 years

Learn more More Fewer

Profi-Radiallüfter TD 2400 für gezielte Trocknung.  Dieser Turbolüfter mit schlagfestem Gehäuse wurde für anspruchsvolle und gezielte Trocknungsaufgaben in professionellen Umgebungen entwickelt. Er ist die ideale Lösung für die Hohlraumtrocknung, die schnelle Teppichtrocknung und die effiziente Wasserschadensanierung. Leistung und Besonderheiten Der TD 2400 zeichnet sich durch seine hohe Leistung und seine präzisen Anwendungsmöglichkeiten aus: Punktgenaue Trocknung: Wichtigste Funktion ist der Anschluss von bis zu drei Schläuchen à 10 m (Schlauchadapter 3 x 102 mm Ø im Lieferumfang enthalten). Dies ermöglicht die zielgerichtete Zufuhr von Trocknungsluft in schwer zugängliche Bereiche. Variable Leistung: Mit drei Gebläse-Stufen ist der Lüfter vielseitig einsetzbar und lässt sich optimal an die jeweiligen Trocknungsanforderungen anpassen. Langlebig & Stark: Ausgestattet mit einem kraftvollen Motor, einem laufruhigen Metalllaufrad und einem SKF-Kugellager für eine besonders lange Lebensdauer. Flexibilität: Das Gerät ist in mehreren Positionen (0°, 45° oder 90°) aufstellbar und verfügt über einen flachen Diffusor für effektive Luftverteilung. Effizienz und Abrechnung: Der integrierte geeichte MID-Energiezähler (kWh) ermöglicht die präzise und abrechnungsrelevante Erfassung des Stromverbrauchs. Handhabung & Sicherheit: Dank kompakter Masse ist der Ventilator einfach zu transportieren, leicht und lässt sich stapeln. Ein Überstromschutz sorgt für erhöhte Sicherheit bei Überlast. Geeignet für Gewerbegebäude Bauwesen Industrie, Fabriken und Produktion Trocknung von nassen Böden und Teppichen Vermietung und Verleih (von Trocknungsgeräten) Wasserschadenbeseitigung Technische Daten Ventilator-Typ Radial Luftleistung 1860 m³/h Pressung 398 Pa Lüfterstufen 3 Leistungsaufnahme max. 680 W Elektrischer Anschluss 230 V/1ph/50 Hz Schutzklasse IP22 Produktgrösse (L x B x H) 480 x 430 x 480 mm Gewicht 14.5 kg Garantie 2 Jahre

Learn more More Fewer

Multifunktions-Axiallüfter – 6 Geräte in Einem Der FD 4000 Axiallüfter ist das der perfekte Ventilator für Handwerker, Dienstleister und die Industrie, wenn es um die professionelle Belüftung und schnelle Trocknung geht. Konzipiert für den anspruchsvollen Dauereinsatz, vereint dieses kompakte und handliche Gerät sechs wichtige Funktionen in einem Gehäuse und beschleunigt die Beseitigung von Feuchteschäden massiv. 6 Funktionen – Maximale Flexibilität Der FD 4000 ist der Alleskönner für jedes Trocknungs- und Belüftungsszenario. Mit nur einem Gerät decken Sie alle wichtigen Anwendungsbereiche ab: Teppichtrockner Wandtrockner Deckentrockner Fussbodentrockner Powerlüfter zur schnellen Kühlung/Belüftung von Räumen. Kombilüfter zur effektiven Unterstützung des Trocknungsprozesses mit einem Kondensationstrockner. Turbo-Trocknung: Zeit- und Kostenersparnis Nutzen Sie die volle Kraft des FD 4000, um Feuchtigkeit aus Wänden, Decken und Böden schnell zu beseitigen. Synergieeffekt: In Kombination mit einem Bautrockner wird der Trocknungsprozess durch die Zirkulation der trockenen Luft um bis zu 50 % verkürzt. Dies sorgt für eine schnelle Abwicklung von Aufträgen und reduziert die Stillstandszeiten. Wirtschaftlich: Trotz seiner hohen Leistung zeichnet sich der Ventilator durch einen sehr niedrigen Energieverbrauch aus. Der integrierte, geeichte MID-Energiezähler (kWh) sorgt zudem für eine transparente und faire Abrechnung der Betriebsstunden. Robust, Effizient und Anwenderfreundlich Der FD 4000 wurde für den harten Baustellenalltag entwickelt und bietet höchste Qualität und Flexibilität: Gehäuse & Lager: Das robuste Kunststoffgehäuse ist extrem belastbar. Hochwertige TPI-Kugellager garantieren eine lange Lebensdauer. Flexibilität: Das handliche und leicht zu transportierende Gerät ist dank verschiedener Aufstellpositionen sehr flexibel einsetzbar. Anpassbare Leistung: Die Luftleistung ist stufenlos regelbar, sodass das Gerät je nach Bedarf sehr leise oder extrem leistungsstark arbeiten kann. Vielseitig: Auch zur gezielten Kühlung und Belüftung von Arbeitsflächen, Maschinen und Motoren bestens geeignet. Baustellentauglich: Aufgrund seiner hohen Schutzklasse ist der Ventilator ideal für den harten Einsatz auf Baustellen. Technische Daten   Luftleistung 3687 m³/h Pressung 113 Pa Ventilator Typ Axial Lüfterdrehzahl Variable Max. Leistungsaufnahme 194 W Elektr. Anschluss 230 V / 1ph / 50 Hz Schutzklasse IP44 Produktgrösse (L x B x H) 665 x 520 x 500 mm Netto-/Brutto-Gewicht 13.5 / 15 kg Geeignet für • Gewerbegebäude• Bauwesen• Industrie, Fabriken und Produktion• Vermietung und Verleih• Wasserschadenbeseitigung Garantie 2 Jahre

Learn more More Fewer

The silencer "SD2" is an element of the Aerial-Aercube series. It can be integrated into the Aercube drying system and reduces operating noise by up to 19 dB(A), which can be particularly helpful in inhabited properties. Additionally, an optional activated carbon filter can be inserted into the housing to reduce odors.Advantages and Features • Reduces operating noise by up to 19 dB • Reduces odors when using the optional activated carbon filter • Suitable for Ø 38 mm and Ø 50 mm hose systems • Ready for connection with up to 270 m³/h air throughput • Easy-to-open safety quick releases • Diverse grip and carrying options • Robust AERCUBE housingThe SD2 does not require its own power connection. It is suitable for continuous operation and can be combined with all elements of the Aercube system. All AERCUBE system components are 100% compatible and stackable with each other. Technical data Tension: requires no power Air flow: bis 300m³/h Weight: 6 Kg Dimensions H x W x D: 300 x 390 x 490mm Operating temperature: -10°C - +40°C Guarantee: 2 years, housing 5 years

Learn more More Fewer

This power distributor records the energy consumption of up to four connected devices using a calibrated energy meter (MID). It was designed to fit the Aerial Aercube drying system and can thus be integrated stacked on it. The CC 4 MID box has been developed for use in construction and water damage drying, offering numerous advantages. The version available for order here is a special version for Switzerland with suitable, standard plugs T12 and sockets T13 (10A).  Features and Benefits   • Extremely robust housing• Protection class IP 44 • Calibrated MID-compliant energy meter• 16 A fuse• residual current device• Number lock included• After installation, there is no access to the internal• More stack sockets possible• Connection of max. 4 consumers• Integrated cable guides in the housing• 4.5 m cable length• Site-compatible power cableFor drying companiesAvailable in your desired color and with your logo upon request.All AERCUBE system components are 100% compatible and stackable with each other.

Learn more More Fewer

The HEPA filter system "HF2" is an element of the Aerial-Aercube series. Using a G4 class pre-filter and a HEPA filter H13, it cleans the drawn-in air with a purity rate of nearly 100%. Particularly in dusty construction environments and during mold remediation, it effectively cleans the air and prevents stirred-up dust, spores, or viruses* from spreading within the building. It is suitable for continuous operation and can be combined with all elements of the Aercube system.A sensor measures the degree of contamination of the filters and automatically reports via an LED display on the front of the housing when they need to be changed. The HF2 does not require a power connection itself, but operates solely with the airflow from the supplying devices. The LED display is therefore powered by a CR2032 battery (round flat battery). The charge status of the battery can be queried at any time by pressing a button.Thanks to two safety quick-release fasteners, the device can be opened quickly and the filters can be easily changed. The filters are disposable products and can be reordered individually.Features and Benefits• Efficient filter system with built-in H13 HEPA filter and G4 pre-filter• LED display informs about dirty filters• Suitable for Ø 38 mm / Ø 50 mm hose systems• Ready for connection with up to 270 m³/h air flow rate• Easy-to-open safety quick-release fasteners• Diverse grip and carrying options• Robust AERCUBE housing• Battery check at the push of a buttonAll AERCUBE system components are 100% compatible and stackable with each other.    Please noteThe shape and design of the pre-filter and HEPA filter were changed a few years ago. Please pay attention to the version that fits your device (round / square) when reordering replacement filters.   *Regarding cleaning effectiveness against the Corona virusCoronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the filter's purity rate.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The HEPA filter thus captures the aerosols and cleans the air of COVID-19 viruses. "Of course, there is no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated through touch. However, for risk reduction, e.g., in waiting rooms, classrooms, offices, or even in private settings, the device is very effective and recommended."  Technical data Tension:   does not require a power connection. LED display is powered by a round flat battery CR2032. Air flow: up to 270m³/h Weight: 6 Kg Dimensions H x W x D: 300 x 390 x 490mm control panel: LED display for filter change Taste "Battery Check" Guarantee: 2 years, housing 5 years

Learn more More Fewer

This separator belongs to the family of the Trotec drying system "Multiqube". It can be integrated into this system, but can also be freely combined with any existing devices from other manufacturers via hose connections. Compared to other brands, the price-performance ratio of this model is excellent.     microfilter system   "It features an integrated microfilter system with a maintenance-friendly magnetic closure filter compartment. This makes it a flexibly deployable integral solution with all pre-HEPA filter stages in just one device."   Advantage: improved flow-optimized filter technology, faster assembly, less material - and space requirement - no separate additional microfilter housings necessary.     Use in combination with a compressor   The connected compressor's automatic shut-off and restart system provides optimal overflow protection that does not require monitoring. With the drying of the insulation layer, the processing of areas up to 40 m² is easily possible.     Extended application possibilities   The "TTKwic" quick couplings attached to the device allow for the connection of up to two dehumidifiers with a condensate pump, which pump the extracted water into the separator. This results in a central water discharge (hose connection Ø 12mm).     Advantages at a Glance   • Approx. 25% performance-enhanced filter technology thanks to filter compartment with microfilter cassette• Stainless steel element for water separation and fine filtration• Residual water drainage function• Active overflow protection through automatic switching on and off of the connected insulation layer dryer• Integrated connection cable• Cable collector• Extremely lightweight, robust, and particularly maintenance-friendly construction• Transport wheels with locking brakes• Maintenance quick-release fasteners• Emergency stop switch• Overflow sensor with automatic shut-off• Space-saving stackable• Lightweight material base: impact-resistant and robust construction, 100% recyclable • Two integrated TTKwic quick couplings for central water drainage for up to two connected dehumidifiers• Easy handling - easy to clean   scope of delivery   MultiQube, a microfilter cassette     Technical data  Volume 17 Liter power connection 230 V / 50 Hz Plug EU plug with Swiss fixed adapter Power consumption 320 W Number of air connections 3 suitable hose diameter 38 mm fine filter 3 pieces class F8 Weight 11.3 kg Masse (B x H x T) 440 x 395 x 420 mm Trotec article no. 6.100.000.006 guarantee 2 years

Learn more More Fewer

The AD20 is a robustly built condensation dryer. It is lightweight, portable, and can be carried like a suitcase. Thanks to the BlueDry technology, the AD20 reliably dehumidifies even at low humidity and temperature. Another advantage is the built-in automatic condensate pump with overflow protection (pumping height up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Robust housing made of impact-resistant plastic. It is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used to connect additional devices.Features and Benefits• Housing: made of robust, impact-resistant, and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Automatic water pump with overflow protection integrated as standard.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other.  Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 18.0 liters / 24h (Power consumption: 350 W)27°C / 60% r.H. = 11.0 liters / 24h (Power consumption: 310 W)20°C / 60% r.H. = 9.0 liters / 24h (Power consumption: 260 W)10°C / 70% r.H. = 5.0 Liters / 24h (Power consumption: 215 W)(r.H.=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption:  max. 350W Sound pressure level:  1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification capacity: max. 18.0 liters / day (30°C / 80% r.H) bucket / pump No bucket. Integrated pump with overflow protection, 4 m delivery height. Recirculation air volume level 1/2 200 / 270 m³/h refrigerant:   R1234yf Dimensions (H/W/D):      420 / 320 / 500 mm Weight:    16.4 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug:  Yes   Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The AD40 is versatile and so lightweight that it can be carried like a suitcase. Thanks to the BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperature.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Water bucket or optional pumpThe water collection container (6.8 liters) is easy to remove, carry, and empty. It is located inside, with the water level of the bucket measured by a float. When full, it automatically interrupts operation, and operation automatically restarts when the bucket is replaced. An optional matching pump kit is available, which is versatile and suitable for unattended continuous operation.Robust housingThe housing is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used for connecting additional devices. Four robust, stable plastic feet for floor placement. Stackable with other Aerial Aercube devices.Characteristics  • Case: made of robust, impact-resistant, and UV-resistant plastic, lightweight. Fixed points for AERCUBE® lashing system. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Optional pump kit available.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other. Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H = 35.0 Liters / 24h (Power consumption: 520W) 27°C / 60% r.H. = 22.0 Liters / 24h (Power consumption: 430W) 20°C / 60% r.H. = 15.0Liters / 24h (Power consumption: 370W) 10°C / 70% r.H. = 8.0 Liters / 24h (Power consumption: 300W)(r.H.=relative humidity)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 530W Sound pressure level:  1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification capacity: max. 35.0 liters / day (30°C / 80% r.H) Bucket: Capacity 6.8 liters, Operational interruption due to swimmer Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant:   R407C Dimensions (H/W/D):      580 / 390 / 450 mm Weight:    25 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug:  Yes   hose connection:  Connection fitting for direct hose connection Optional Pump Kit Operating hour meter: Yes Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

Professional dehumidifier for demanding drying tasks, available in bucket or pump.The Fral F96 dehumidifier is a robustly built quality dryer for construction, trade, and industry. It has a very powerful performance and is also suitable as a large room dehumidifier for spaces up to 200m² (or 500m³) starting from 1°C! Relatively quiet operation.     Due to well-developed hot gas defrosting, the F96 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity areas, where the F96 still extracts water from the air, in conditions where other dryers have long stopped producing any drops (according to our tests, clearly below the threshold of 30% relative humidity).It is suitable for unattended continuous operation. The condensate can either be collected in the removable 15-liter bucket (a scale measures the weight and automatically interrupts operation when the bucket is full), or it can be drained directly via a hose connection. The F96 is mounted on 2 stable wheels and has a metal handle for easier mobility. Due to its size and the solid metal housing, it may need to be carried by two people up stairs.It is suitable:• as a construction dryer• Large area dehumidifiers for commercial and industrial use• for dehumidification of basements up to 200m2 and in case of water damage• for unattended continuous operation• for operation on a timer"When the desired target humidity is reached, the device completely shuts down. The built-in operating hour counter clearly and quickly shows how long the device has been in use."This construction dryer fits any standard 3/4-inch coupling, e.g. Gardena, etc. available from us or at your local hardware store.   dehumidification performance   Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 80 liters (60%: 54 liters) 20°C/80% r.H.: 48 liters (60%: 32 liters)15°C/80% r.H.: 31 liters (60%: 21 liters)10°C/80% r.H.: 26 liters (60%: 19 liters)5°C/80% r.H.: 19 liters (60%: 7 liters)(r.H.=relative humidity)2 year guarantee   Technical data Voltage: 230V / 50HzPower consumption: max. 1350W / 980W (at 20°C/60% r.H.)Sound pressure level: 1 m distance 55 dB (A) (our measurement) / 2.5 m distance 53 dB(A) (manufacturer's specification)Dehumidification capacity: 80 liters/day (30°C / 80% r.H.) Air volume: 550 m³/h (built-in) 780 m³/h (free-blowing)Condensate tank: approx. 15 litersCompressor:Rotary Compressor refrigerant: R407cDimensions (H/W/D): 113 x 67 x 77 cmWeight: 54 kgOperational setting: HygrostatAmbient temperature: 1°C ~ 35°CApplication area: up to 200m² (heated rooms) or 150m² (unheated)Swiss plug: Yes  Hose connection: YesOperating hour counter: YesWarranty: 2 yearsSeries: Fral FDNP96SHEAN Codes: 0745114671578 F96 with bucket CH plug0745114671585 F96 with pump CH plug

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935 features both an 8-liter condensate tank and a connection nozzle for direct drainage of the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 34.0 liters / 24h (Power consumption: 610 W)20°C / 60% r.H. = 16.5 liters / 24h (Power consumption: 450 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 610 W max. Sound pressure level 2.5 m distance 51 dB(A) dehumidification performance     34 liters/day (30°C / 80% r.H.)  condensate tank Approx. 8 liters   Air volume level 1 / 2 300 / 420 m³/h (Night mode: 300 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   860 x 392 x 508 mm   Weight 35.4 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935S features both an 8-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically detects the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. The air is expelled through two Ø100mm nozzles, which blow the air into the room at a good speed. Air hoses can also be attached to these nozzles if the dry air needs to be directed precisely to a specific location. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 28.0 liters / 24h (Power consumption: 785 W)20°C / 60% r.H. = 13 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 1-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Equipped with a 1kW electric heating element and 2x Ø100mm duct connections• Maintenance and service friendly     Technical data  Tension 230V / 50Hz Power consumption 785 W max. (1785 W with additional heating) Recording supplementary heating  +1000W  Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     28 liters/day (30°C / 80% r.H.)  condensate tank Approx. 8 liters   air volume 400 m³/h  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   860 x 391 x 505 mm   Weight ca. 36 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs.   The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.)  Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H / W / D):      690 x 390 x 470 mm Weight:    32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The VP3 sound boxes are suitable for intensive use in water damage drying. They generate pressure, which can be used equally for suction and blowing. They operate with air-cooled side channel blowers in a robust AERCUBE housing.Thanks to various grip and carrying options, the devices have excellent handling characteristics. A securing system provides additional stability during transport or storage. Features and Benefits Air-cooled side channel blower, vibration-damped mounted 1100 W motor power For drying areas of approximately 30 – 50 m² Intelligent E.DRY electronics with full text display Bar graph and multicolored LED for reading the back pressure "Operational and kWh meters readable without power" Very quiet through highly efficient sound insulation technology Easy-to-open safety quick releases Diverse grip and carrying options Extremely robust AERCUBE housing Integrated cable winder with magnetic plug holder   All AERCUBE system components are 100% compatible and stackable with each other.Aerial "eDRY®" for efficient dehumidificationThe prerequisite for economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of room humidity.The manufacturer "Aerial" belongs to the Dantherm Group and is one of the leading European producers of high-quality professional construction dryers and dehumidifiers for commercial and private use.Technical data Tension: 1 x 230V / 50 Hz Power consumption: 1100W max. Insurance: 10A air volume flow 150 m³/h Sound pressure level: 3 m distance max. 48 dB(A) Max. differential pressure Vacuum: 170 mbar Pressure: 190 mbar Weight: 15 Kg Dimensions H x W x D: 507 x 390 x 455 mm control panel: • Electronics with full-text display for showing the device status. • Bar graph and LED for reading the back pressure. • Display: Operating hours • On/off switch • Device socket with fuse (max. 8 A) • 2-fold temperature monitoring • Safety shutdown in case of overload • calibrated energy meter (MID-compliant), can be read without power Swiss plug: Yes Guarantee: 2 years, housing 5 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-955 features both a 13-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 53 liters / 24h (Power consumption: 830 W)20°C / 60% r.H. = 22.5 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 830 W max. Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     53 liters/day (30°C / 80% r.H.)  condensate tank Approx. 13 liters   Air volume level 1 / 2 290 / 550 m³/h (Night mode: 290 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   845 x 452 x 538 mm   Weight 41.8 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.Due to its high dehumidification performance, the AD-975 is equipped with a water pump as standard. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Standard equipped with pump set, no bucket• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 76 liters / 24h (Power consumption: 1070 W)20°C / 60% r.H. = 34.5 liters / 24h (Power consumption: 785 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 1070 W max. Sound pressure level 2.5 m distance 64 dB(A) dehumidification performance     76 liters/day (30°C / 80% r.H.)  water pump standard (no bucket), lift height 4 m Air volume level 1 / 2 750 / 900 m³/h (Night mode: 750 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   906 x 502 x 547 mm   Weight 48.3 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.Due to its high dehumidification performance, the AD-995 is equipped with a water pump as standard. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Standard equipped with pump set, no bucket• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 95 liters / 24h (Power consumption: 1830 W)20°C / 60% r.H. = 46.5 liters / 24h (Power consumption: 1282 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 1900 W max. Sound pressure level 2.5 m distance 64 dB(A) dehumidification performance     76 liters/day (30°C / 80% r.H.)  water pump standard (no bucket), lift height 4 m Air volume level 1 / 2 750 / 900 m³/h (Night mode: 750 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   906 x 502 x 547 mm   Weight 58.2 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer