What can be found in almost every household in the far north is hardly known in our region. The drying cabinet is space-saving and dries clothes, shoes, gloves, etc. quickly and gently. The capacity corresponds to approximately a 16m long clothesline or about 5 kg of laundry.The door hinge on this model is on the left and the handle is accordingly on the right.Gentle dryingUnlike a conventional tumbler, cabinet dryers do not cause wear and tear on textiles. The Ecodryer 2.0 is built on the latest heat pump technology, making it energy-efficient. A stream of warm air is regularly distributed inside the cabinet from the back wall through dozens of exhaust holes, ensuring that the laundry dries evenly. The maximum internal temperature is 55°C, allowing even more delicate garments to be dried.drying processThe drying process itself is quite simple: at the push of a button, you can choose between damp ironing and cupboard dry. The preset recommended values can be changed at any time to personal preferences. When the laundry is dry, the device switches off. The operating noise of the drying cabinet is only 52 dB(A) (comparable to a range hood), making it significantly quieter than room air dryers. It is therefore also suitable for use in apartments and noise-sensitive basement environments. The operating language can be selected according to personal preference. In addition to the Nordic languages, operation is also available in German, French, and English by default.The interior inventory of the cabinet dryer consists of 3 pull-out fork sliders, each with 10 rods, which can be directly hung with laundry or hangers. When longer garments are hung on the hanger, the two lower shelves can simply be folded up, so that half or the entire interior height remains free. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate.The extracted water is drained similarly to a dehumidifier or Secomat. It can either be collected in a simply removable 2-liter bucket or drained directly through a hose connection. This ensures that hardly any moisture enters the room air. An integrated pump also allows for drainage into higher drainage lines up to about 1.2m from the floor. The bucket is equipped with a float that automatically interrupts operation when full.Economical operationThe "Ecodryer" drying cabinets differ from previous models in that they are not based on energy-intensive resistance heating, but on an economical heat pump principle. This reduces operating costs compared to earlier models by 70%. Only the waste heat from the compressor is used to heat the interior of the cabinet. A thermostat monitors the interior temperature. If it rises above 55°C, a second fan is activated, which immediately regulates the interior temperature as needed. With this technology, consumption has been reduced to 0.28 kWh per kg of laundry. A drying process takes approximately 1.5-3 hours, depending on the load and moisture content of the laundry.maintenanceUnder the easily removable floor plate lies the air filter, which must be cleaned regularly. Otherwise, the device is maintenance-free. Also very well thought out is the handling in the unlikely event of a technical problem: the entire technology is inserted under the floor plate as a cassette and can be pulled out for repair work or replacement without having to move or transport the cabinet itself.You can exclusively obtain the Ecodryer 2.0 in Switzerland from us. It is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux.  Technical data  dimensions HxWxD  Bandung door 1925 x 595 x 675 mmThe door is optionally fixed on the left or right. Weight 94 kg Protection class IP24, CE certified capacity 16m drying rodsNormal filling quantity approx. 4-5 kg, max. approx. 8 kg operating noise 52dB(A) power connection Swiss plug, 220 V 10A, max. 900W dehumidification performance up to 1.5 liters per hour, 36 liters per day Power consumption approx. 0.28 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German

Learn more More Fewer

The 420H is the most powerful dryer in the Bora series and has been specifically designed for intensive use in multi-family homes. With a drying time of just over three hours for two washing machine loads, depending on the selected fan speed, it is ideal for high-traffic drying rooms. The model offered here features an adjustable heating function that further accelerates the drying process if needed. As the successor to the proven "Bora 520H", the 420H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 420H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It spreads relatively wide, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. Therefore, the optimal mounting height of the Boras should be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 35 m² Drying performance: 3.00 - 4.74 kg/h depending on fan speed Consumption per kg of laundry:   0.21 - 0.27 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.75 kW with heating switched on ("H" models): 1.75 kW Sound pressure level: Fan level 1: 54 dB(A) Fan level 3: 69 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 64 kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The heavy-duty worker among the new Aerial WT dryers! It is specially designed for intensive use and dries laundry quickly and reliably with easy operation. With a drying capacity of approximately 3.6 kg of laundry per hour, this model dries in about 2 hours what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan levels: The WT280 has one (powerful) fan level. This provides quick drying results, even with a lot of laundry and long drying rooms of up to about 10m.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.    mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable trolleys in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 40 m² Drying performance: 3.68 Kg/h Consumption per kg of laundry:   0.29 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 1350W or 950W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 2.5 m distance 67 dB(A)   Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 79.2 L/24h (Power consumption: 1390 W) at 27°C / 60% r.H. = 46.6 L/24h (Power consumption: 1080 W) at 20°C / 60% r.H. = 32.2 L/24h (power consumption: 990 W) at 10°C / 70% r.H. = 20.3 L/24h (Power consumption: 800 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 43 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

This model is suitable for single-family homes with larger amounts of laundry and in drying rooms that can become cooler in winter. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer functionAdditionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.   executionCompact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating: The Secomat150H is equipped with a 1350W heater. This automatically switches on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage. In this case, please refer to the standard version "Secomat150".Technically, the Secomat dryers can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of deliveryThe delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly"Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  drying room: up to 25 m² Drying performance: 3.17 Kg/h Consumption per kg of laundry:   0.30 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secomat 150H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification with 15kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1300 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer