Dehumidifier and air purifier in one device with 95% air purity Enjoy indoor air. This design dehumidifier makes that and more possible. Equipped with two technologies for the permanent improvement of air quality, the combination devices eliminate unhealthy moisture in residential and commercial spaces, offices, retail stores, unheated conservatories, basements, and garages. Furthermore, the indoor air is purified in the integrated filter, removing 95 percent of disease-causing bacteria and viruses, mold spores, pollen, house dust, fine dust, allergens, and other pollutants. A permanent health protection for all individuals in the room – a noticeable relief, especially for allergy sufferers and those with house dust allergies.  Everything for healthier indoor air and more quality of life A hygrostat-controlled dehumidification automation with target selection of the desired humidity (30% to 80%), digital air quality sensors, four operating modes including night mode, and a two-stage fan ensure reliable dehumidification and air purification. For unattended continuous operation, the device is equipped with overflow protection and also has a rear hose connection to permanently drain the condensate extracted from the air via a hose. Conveniently, the front color LED display shows the status of the indoor air quality in three colors (Blue, Green, Red). A lit segment display in the LED display provides precise percentage information about the current humidity, the preset target humidity, and the remaining operating hours with the activated 24-hour timer for time-controlled switching on or off.  Seeing indoor air with different eyes: Air quality sensors "You cannot tell from the air whether it is too humid or contaminated with pathogens. If mold spores or viruses are floating invisibly in the air, this usually only becomes noticeable when it is already too late." The sensor sees what you cannot see. It continuously measures the room air humidity. Convenient is the front-facing color LED display of the current room air humidity: Blue: Indicates a humidity level below 50%Green: Indicates an optimal humidity level between 50 to 70 %Red: Indicates a humidity level above 70% "Cleaned and dehumidified room air makes the difference" A person breathes in and out between 10,000 and 20,000 liters of air per day. If the air is too humid and contaminated with pollutant particles or pathogens, it burdens our immune system and, in the worst case, leads to respiratory diseases. Likewise, furniture, fixtures, and even the building structure can be damaged by consistently high humidity (> 60 percent).  Combined protection against moisture and pathogens With its combined air purification and dehumidification technology, this all-rounder reliably prevents the formation of unhealthy moisture nests and associated moisture problems such as mold growth, stains, and dampness. The room air is purified in a dual filter system consisting of a pre-filter and a high-performance filter, removing virus-laden aerosols, viruses (such as SARS-CoV-2 and influenza viruses), bacteria, mold spores, fine dust, house dust, pet hair, and other airborne pathogens. It also reduces the growth of dust mites and allergens. A clean solution. The high-performance filter is consumable and should be replaced from time to time. The pre-filter is washable and can be reused repeatedly.  Auto-Restart Function The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.  The complete solution for a healthy indoor climate This 2-in-1 device is characterized by extensive comfort features, high ease of use, and the pleasantly low noise level, making the air purifiers also suitable for use in noise-sensitive environments. Hygrostat-controlled dehumidification automation: In the hygrostat-controlled dehumidification automation, the device operates continuously until the desired air humidity level is reached. This can be set between 30% and 80% in 5% increments. After that, the compressor automatically switches off. If the target value is exceeded again, the device activates automatically. Thus, the dehumidifier always ensures optimal room air humidity according to your needs. Continuous operation: Condensed water on walls, glass surfaces, or cold bridges, combined with insufficient ventilation, are common causes of moisture damage, as well as when water from outside penetrates through a poorly insulated wall or during flooding and heavy rain events into the basement. To maintain a permanently dry environment, the air dryer features a powerful continuous operation. In this operating mode, the room air is continuously dehumidified at maximum performance. Night Mode: Poor air quality caused by excessive humidity, unpleasant odors, or stuffy air can literally rob you of sleep. In night mode, the device cleans and dehumidifies the air with a gentle airflow and a dimmed control panel. For a restful sleep to recharge. Clothes drying function: For gentle air drying of laundry, the drying mode is recommended. The clothes drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. The air filter ensures that pollen and fine dust are not blown through the laundry and remain attached to it. 24-Hour Timer: This allows the operation to be turned on or off after a certain number of hours. In the bedroom, a combined air dehumidification and purification is recommended for a restful sleep – during the day, however, the device does not need to operate when one is out of the house. Similarly, dehumidification and air purification in the office or workplace are only necessary during working hours. For these and other usage scenarios, the device features a programmable 24-hour timer, which allows the operating time to be preset for automatic on or off switching in 1-hour increments. Thanks to the memory function, the operation can also be controlled with a standard timer switch if the device is to operate at the same times every day (for example, during off-peak hours).  air circulationIn this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device. Advantages at a Glance • Combined dehumidifier with high-performance air purifier (95% effective filtration of bacteria, viruses, pollen, fine dust, dust mites, mold spores, and other allergens as well as pollutants)• Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor automatically turns off. The fan continues to run to keep the air clean. If the level is exceeded, the device activates automatically.• Suitable for rooms up to 15 m² / 37 m³• Dehumidification capacity max. 12 liters / 24 hours• Air quality display with color LED• Display of relative humidity• Continuous operation for continuous dehumidification in unattended rooms• Timer function (1-24 hours)• Night mode (whisper quiet)• Auto-restart function (memory function)• Overflow protection – Device switches off after reaching the maximum capacity of the water tank.• Warning signal for full water tank• Water container approx. 2.5 liters• Two-stage blower• Connection option for a drain hose for continuous operation• Laundry drying function  Technical data  dehumidification performance at 30 °C / 80 % r.H. 10 liters / day air volume 90 m³/ h Maximum room size 20 m² (50 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C  moisture range 30 - 80 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.4 A Power consumption max. 245W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter refrigerant R290 (30g) GWP3 water bucket 2.5 Liter operating noise 45 dB(A) at 1 m distance 42 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 245 x 500 mm Weight 9.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and HEPA-Filter yes, efficiency 95% Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity, air quality Night mode and memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery (10 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Comfort, design, and high air performance   This dehumidifier impresses with its elegant design and thoughtful functionality. Its diverse features include a total of four operating modes. Here, the dehumidifier offers a hygrostat-controlled dehumidification automatic with a target value selection between 35 and 85% relative humidity in comfortable 5% increments, including an optional turbo fan.   A popular alternative to the dehumidification automatic function is the comfort function, where the humidity level is automatically adjusted to a comfortable value depending on the temperature. Additional operating modes include a laundry drying function and a permanent function.     Comfort function: Temperature-dependent air dehumidification   To achieve an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended when using programmable heating systems. If the room temperature changes during the day or at night, the dehumidifier automatically adjusts its dehumidification performance. This protects against mold formation and saves electricity.      Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Practical Functions   When drying residential and office spaces of up to around 40 m², this dryer is an absolutely reliable partner. Various details simplify operation, such as the viewing window on the tank, which makes the fill level easily recognizable, the practical timer function, the fill level warning light when the water container is full, and the overflow protection with automatic shut-off. The air filter is easy to remove and wash. When the tank is full, a float automatically interrupts operation.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with unchanged settings after a power interruption as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be used to significantly accelerate the drying of laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.     Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection between 35 and 85 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor (i.e., the dehumidification) automatically pauses. The fan continues to run to determine the actual humidity in the room. If it exceeds the limit, the device automatically switches back on.• Comfort operation for temperature-dependent automatic control of humidity for optimal room climate at all times• Continuous operation• Auto-restart function for use with an external timer• Display of relative humidity• Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Laundry drying function• Timer Function• Recirculation defrost automatic• Connection for external condensate drainage• 3 fan speeds• Level warning light when water tank is full• Automatic shutdown when tank is full thanks to float   Technical data  dehumidification performance at 30 °C / 80 % r.H. 16 liters / day air volume 150 m³/ h Maximum room size 40 m² (100 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.2 A Power consumption max. 430W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (75g) GWP3 water bucket 3 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 350 x 510 mm Weight 15 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 3-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Good, affordable household dehumidifier This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower outlet. The hose must be laid with a downward slope, as no pump is included in the device. The hose connection is particularly well designed in this model: if the hose is not permeable or is incorrectly laid (kinked, insufficient slope, etc.), the water is automatically redirected into the bucket, which automatically shuts off the device when full. In other models, backed-up water can lead to leakage from the bottom, which is prevented in this model.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 1-2 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off  Technical data  dehumidification performance at 30 °C / 80 % r.H. 20 liters / day air volume 150 m³/ h Maximum room size 50 m² (125 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 1.8 A Power consumption max. 420W Recommended Coverage 10 A Cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (86g) GWP3 water bucket 3 Liter operating noise 43 dB(A) at 1 m distance 40 dB(A) at a distance of 2.5 m Dimensions L x W x H 253 x 340 x 570 mm Weight 12.5 kg defrosting automatic Electronic, Recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter guarantee 2 years       Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Der TTK 72 E ist ein preiswerter, kompakter Luftentfeuchter für Keller, Archive und zur schnelleren Trocknung der Wäsche. Eine integrierte LED-Anzeige informiert jederzeit über den aktuellen Feuchtigkeitsstatus im Raum: Blau: unter 55 % r.F. Grün: 55 – 70 % r.F. (Optimalbereich) Rot: über 70 % r.F. Komfortable Funktionen Neben dem Automatikbetrieb (55 % r.F.) verfügt das Gerät über eine hygrostatgesteuerte Entfeuchtungsautomatik (30–80 % r.F. in 5 %-Schritten), Permanentmodus sowie Ventilationsfunktion. Zur Ausstattung gehören ausserdem Wäschetrocknungs- und Timer-Funktion, Füllstandwarnleuchte, Überfüllungsschutz mit Autoabschaltung, auswaschbarer Luftfilter sowie ein Anschluss für externen Kondensatablauf. Schonende Wäschetrocknung Die integrierte Wäschetrocknungs-Funktion ermöglicht eine besonders materialschonende Trocknung – energiesparend und farbschonend. Auch empfindliche Textilien wie Wolle oder Seide können problemlos getrocknet werden. Empfohlene Feuchtewerte: Schranktrocken: 46 % r.F. Bügelfeucht: 58 % r.F. Angetrocknet: 65 % r.F. Umweltfreundliches Kältemittel R290 Der TTK 72 E verwendet das natürliche Kältemittel Propan (R290). Es besitzt kein Ozonabbaupotential (ODP=0), einen sehr geringen Treibhauseffekt (GWP=3) und überzeugt durch hohe Energieeffizienz – gut für Umwelt und Energiekosten. Vorteile auf einen Blick Entfeuchtungsautomatik (30–80 % r.F.) Temperaturabhängiger Komfortbetrieb Farb-LED-Feuchteanzeige Permanentmodus & Ventilation Wäschetrocknungs-Funktion Timer-Funktion Umluftabtauautomatik Externer Kondensatablauf 2 Gebläsestufen Überfüllungsschutz mit Autoabschaltung Technische Daten Produktidentifikation Artikelnummer 1120000073 Leistungsdaten & Eignung Entfeuchtungsleistung max. 20 l / 24h (bei 30 °C / 80 % r.F.) Empfohlene Raumgrösse 50 m² / 125 m³ Luftmenge (Stufe 1 / 2) 180 / 195 m³/h Arbeitsbereich Temperatur 5 °C bis 32 °C Arbeitsbereich Feuchtigkeit 30 % bis 80 % r.F. Elektrische Werte Leistungsaufnahme 320 W Nennstromaufnahme 1.48 A Netzanschluss 220 - 240 V, 50 Hz Anschlusskabel ja, EU-Stecker mit Fixadapter für die Schweiz Empfohlene Absicherung 6 A Kältemitteltyp / Menge R290 / 60 g GWP Faktor / CO2-Äquivalent 3 / 0.00018 t Masse (L x B x H) 198 x 330 x 570 mm Gewicht (ohne Verpackung) 13 kg Wasserbehälter Kapazität 5.5 Liter Abtauautomatik Umluft elektronisch Schallpegel (Abstand 1m) 48 dB(A) Mobilität Tragegriff & Kunststoff-Transportrollen Anschluss Kondensatablauf Möglich (Kurzes Schlauchstück im Lieferumfang enthalten) Garantie 2 Jahre

Learn more More Fewer

Reliable dehumidifier with solid drying performance This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower-lying drain. The hose must be laid with a downward slope, as no pump is included in the device.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 2-3 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concern.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off•  Hot gas defrosting: faster automatic self-defrosting in cooler environments.   Technical data  dehumidification performance at 30 °C / 80 % r.H. 25 liters / day air volume 215 m³/ h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.4 A Power consumption max. 570W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Der Trotec TTK99 HEPA ist ein perfekter Allrounder für Ihren Haushalt. Dieser designstarke Luftentfeuchter und Luftreiniger eignet sich optimal zur Trockenhaltung von feuchten Kellern, Garagen und Waschküchen sowie zur schnelleren Wäschetrocknung. Mit seinem Intensiv-Filter sorgt er gleichzeitig für eine effektive Luftreinigung – für ein trockenes und gesundes Raumklima. Raumluftqualität im Blick: Dank Air-Quality-Sensoren Der Trotec TTK99 HEPA reguliert nicht nur die Luftfeuchtigkeit (30 – 80%), sondern reinigt die Luft auch gleichzeitig. Während man der Raumluft ihre Belastung durch Krankheitserreger oder Schimmelpilzsporen nicht ansieht, erkennt der TTK 99 HEPA, was Ihnen verborgen bleibt. Seine digitalen Feuchtesensoren messen fortlaufend die Raumluftfeuchte. Eine praktische, vorderseitige Farb-LED-Anzeige informiert Sie über die aktuelle Raumluftqualität: Blau: Zu trocken Grün: Optimal Rot: Zu feucht Effektive Entfeuchtung für grosse Räume Mit einer Entfeuchtungsleistung von bis zu 31 Litern pro Tag eignet sich der TTK99 HEPA ideal zur Trockenhaltung von Räumen bis zu 90 m² (230 m³), wie Kellern, Garagen, Archiven oder Waschküchen. Beachten Sie, dass das Betriebsgeräusch in ruhigen Wohn- oder Schlafzimmern deutlich wahrnehmbar sein kann. Hierfür empfehlen wir den leiseren Dryfix Royal 24 aus unserem Sortiment. Bei Bedarf unterstützt der TTK 99 HEPA auch die Wäschetrocknung erheblich: In leicht temperierten Räumen kann er 1-2 Waschmaschinenfüllungen pro Tag trocknen. Leistungsstarke Luftreinigung mit HEPA-Filter Das zweifache Filtersystem des TTK99 HEPA mit Vorfilter und Intensiv-Filter (EPA-Filter Klasse E11) entfernt bis zu 95% der Schadstoffe aus der Luft, darunter Viren, Bakterien, Schimmelpilzsporen, Pollen, Hausstaub und Allergene. Dies gewährleistet eine ausgezeichnete Reinigungswirkung. Besonders Allergiker schätzen, dass beim Wäschetrocknen herumfliegende Pollen vom Filter abgefangen werden und so nicht in Kleidung oder Bettwäsche gelangen. Komfort und Benutzerfreundlichkeit Hygrostatgesteuerte Automatik: Stellen Sie die gewünschte Luftfeuchtigkeit ein, den Rest erledigt das Gerät. Vier Betriebsmodi: Wählen Sie flexibel zwischen Automatik, Dauerbetrieb, Wäschetrocknung und Nachtmodus. 24-Stunden-Timer: Programmieren Sie Ein- und Ausschaltzeiten präzise in 1-Stundenschritten. Kindersicherung: Schützt die Einstellungen vor ungewollten Veränderungen. Auto-Restart-Funktion: Das Gerät startet nach einem Stromausfall automatisch neu mit den zuvor gewählten Einstellungen (Memory-Funktion). Vorteile des Trotec TTK99 HEPA auf einen Blick: Kombinierter Luftentfeuchter mit Intensiv-Luftreiniger (95% Filtration von Bakterien, Viren, Pollen, Feinstaub, Milben, Schimmelpilzsporen und Allergenen) Hygrostatgesteuerte Entfeuchtungsautomatik (30–80% r.F.) Geeignet für Räume bis 90 m² / 230 m³ Entfeuchtungsleistung: max. 31 Liter / 24 Stunden Luftqualitätsanzeige mit Farb-LED Anzeige der relativen Luftfeuchtigkeit Permanentmodus für Dauerbetrieb Timerfunktion (1–24 Stunden) Auto-Restart-Funktion (Memory-Funktion) Kindersicherung Überlaufschutz und Warnsignal bei vollem Wasserbehälter Wassertank: ca. 4 Liter Zweistufiges Gebläse Anschlussmöglichkeit für Ablaufschlauch Wäschetrocknungsfunktion Der Ventilator läuft nach Erreichen der Zielfeuchte 3 Minuten nach, um das Innere des Gerätes zu trocknen und so vor Schimmelbildung zu schützen. Lieferumfang TTK 99 HEPA Luftentfeuchter HEPA Luftfilter (Kategorie E11) Vorfilter Schlauch für Kondensatablauf Trotec TTK99 HEPA: Technische Daten Entfeuchtungsleistung (30°C / 80% r.F.) 31 Liter / Tag Luftvolumen 170 m³/h Maximale Raumgrösse 90 m² (100 m³) Minimale Raumgrösse 4 m² Temperaturbereich 5 - 32°C Feuchtigkeitsbereich 35 - 100 % r.F. Stromspannung 220 - 240 V/50 Hz Nennstromaufnahme max. 3.38 A Leistungsaufnahme max. 720 W Empfohlene Absicherung 10 A Kabellänge ca. 1.8 m Stecker EU-Stecker mit Schweizer Fixadapter Kältemittel R290 (90g) GWP3 Wassereimer 4 Liter Betriebsgeräusch (1m / 2.5m Abstand) 51 dB(A) / 48 dB(A) Abmessungen (T x B x H) 250 x 370 x 585 mm Gewicht 17 kg Abtauautomatik Umluft, elektronisch Entfeuchtungsautomatik Hygrostatgesteuert Ventilator radial, 2 stufiges Gebläse Automatische Abschaltung bei vollem Eimer Ja Vorfilter Ja Timer Ja Dauerbetrieb möglich Ja Wäschetrocknungsmodus Ja Display Zeigt aktuelle/eingestellte Raumfeuchte Memory-Funktion Ja (speichert Einstellungen) Schlauchanschluss Ja, kurzes Schlauchstück im Lieferumfang Trotec Artikel. Nr. 1.120.000.103 Garantie 2 Jahre Dokumente / Downloads für den Trotec TTK99 HEPA Bedienungsanleitung Deutsch Bedienungsanleitung Französisch Bedienungsanleitung Italienisch

Learn more More Fewer

A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

This modern dehumidifier combines the latest technology with an appealing design and is the ideal solution for home and basement. It offers improved performance compared to the predecessor model Airsec3000 and ensures an optimal indoor climate. The operation is incredibly simple: With the push of a button, you can choose from four operating modes: Air purification: Recirculation only for the removal of dust particles.Manual Dehumidification: Setting the desired target humidity.Automatic Dehumidification: Intelligent moisture regulation that automatically adjusts to the room temperature.Continuous operation: Ideal for drying laundry or for quickly removing moisture after water damage.Intelligent Moisture Regulation In automatic mode, the dehumidifier continuously monitors the room humidity. When the optimal humidity level is reached, the device automatically pauses. If the humidity rises again, the dehumidifier resumes operation on its own.   Timer "With the timer, the remaining runtime can be limited hourly up to a maximum of 24 hours. When the time has expired, the operation stops regardless of the measured room humidity at that time. The remaining time can be queried at the push of a button."     fan speedIn "Normal Operation" and "Air Purification" modes, the fan speed can be set to "low" or "high". The high setting increases circulation in the room, which is particularly beneficial in larger rooms, in spaces with a lot of dust in the air, and when assisting with laundry drying. The low setting reduces the amount of recirculated air, but also the operating noise. This setting is therefore ideal in smaller and noise-sensitive areas. With 48 dB(A), this dehumidifier is among the quieter, although not the quietest devices in this category on the market. If you are interested in a quieter model, also check out our offer "Dryfix Royal 24".    Large bucket   With a capacity of 6.5 liters, the condensate bucket has a comfortable size. This is particularly advantageous for humidity regulation in the basement, where the device operates unattended and the bucket needs to be emptied less frequently than with devices that have a smaller tank. Furthermore, the dehumidifier features a direct hose connection for draining the extracted water into a potentially existing floor drain.     Air filter   A air filter is installed at the air intake on the back. It cleans dust from the room air and ensures that it does not contaminate the interior of the device. The filter is washable and reusable.     dehumidification performanceThe dryer can be used over a temperature range of +5°C to +32°C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H.: 26 Liters / 24h20°C / 60% r.H.: 7.8 Liters / 24h (r.H.=relative humidity)     Environmentally friendly refrigerant   The contained refrigerant R290 has minimal environmental impact. The "Global Warming Potential (GWP)" is now only 3, which corresponds to a reduction of 99.85% compared to similar models from previous generations.     Characteristics   • Modern, compact design• Natural, environmentally friendly refrigerant R290 (propane)• Adjustable air outlet flap• 6.5 liter water tank with visible water level• Dehumidification capacity of up to 26 liters per day• Ambient temperature 5 - 32 °C• Digital display of target humidity or temperature• 24 h timer function• Washable air filter• Built-in handle, easy to carry     Technical data Tension 220V-240V / 50Hz Power consumption 330W at 20°C/60% r.H, max. 440W/1.89A Operating noise1 m distance2.5 m distance ?48dB(A) depending on fan speed?46dB(A) depending on fan speed Min./Max. room size 4 / 65 m² dehumidification performance 26 liters/day (30°C / 80% r.H.)  Condensation tank Approx. 6.5 Liters   Compressor   Rotary compressor  refrigerant R290 (Propane), 65g Dimensions (H x W x D)   570 x 340 x 240 mm Weight 14.5 Kg Air flow max. 200 m³/h Operational cessation Digital  Ambient temperature 5°C ~ 32°C  Area of application Basement, hobby room, apartment, bedroom, laundry drying Swiss plug Yes   hose connection Yes Global Warming Potential (GWP) 3 Guarantee 2 years   Documents / Downloads   Operating Instructions German  User manual French  User manual Italian

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer

This construction dryer is very popular in professional use because it has a strong dehumidification performance of up to 30 liters per day and, at less than 20 kg, is considered one of the lightweight models in this category of dehumidifiers. This means that it can be easily transported by one person up stairs and even over scaffolding to the drying location. Furthermore, it is compact in dimensions, which saves space in the service vehicle. This is highly appreciated by water damage restorers who need to bring many devices to the damage site in the shortest possible time. This model also impresses during storage, as it is stackable and therefore takes up less space in the warehouse.  Operation 'The digital control panel at the top of the device allows you to select the desired target humidity in 1% increments. Continuous operation is also possible. By pressing the memory button, the set values are saved. This way, in the event of a power interruption, operation will automatically continue with unchanged settings as soon as the power supply is restored. A side-mounted operating hour meter provides information about the drying duration.' The humid room air is drawn in from the back and cleaned of dust and dirt through an easily cleanable filter. The dried air is then blown out from the front. The automatic hot gas defrosting ensures that dehumidification occurs with maximum efficiency even in cooler environments. The water extracted from the air can be collected in the inserted bucket or drained directly through a hose (suitable inner diameter: 10 mm). A float automatically interrupts operation when the bucket is full. If the water is drained through the hose, it first passes through the bucket to which the hose connector is attached. This system is very safe: if the hose is clogged, kinked, or not properly laid, the water backs up into the bucket. When the bucket is full, operation stops. Overflow onto the floor is therefore not possible, unlike dryers where the hose is directly attached to the drip tray.  Important functions • Digital control and side-mounted operating hour meter• High efficiency thanks to automatic hot gas defrosting• Robust housing with a foldable carrying handle and four small wheels• Easy operation• Built-in hygrometer• Water tank with automatic shut-off when full• Possibility to connect a hose for direct drainage of condensate• Air filter• Stackable   Suitable for • Drying of private cellars and rooms• Drying of commercial spaces and archives• Construction• Industry and Production• Rental• Construction and water damage drying• Waterworks  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers"Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."   Technical data  dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H.   10.8 liters / day 30 liters / day air volume max. 200 m³/ h Maximum room size 75 m² (180 m³) temperature range 5 - 35 °C Moisture range technical  Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3 A Power consumption max. 680 W Recommended Coverage 10 A Plug Connection cable with EU plug and Swiss fixed adapter refrigerant R290 (GWP: 3) Bucket + Hose connection 6.5 liter bucket and direct hose connection (suitable hose 10mm inner diameter) operating noise 45 dB(A) at 1 m distance 42 dB(A) at a distance of 3 m Masse (B x H x T) 338 x 550 x 358 mm Weight 19.5 kg Automatic defrosting Heissgas Attitude Digital Operator Panel Ventilator axial, single-stage blower Compressor rolling piston prefilter and operating hour meter and Continuous operation possible and Display and memory function yes (set values saved on button press) guarantee 2 years

Learn more More Fewer

Kompakter Bautrockner für Profis und Gewerbe Dieser kompakte und leichte Luftentfeuchter ist die ideale Lösung für alle, die schnell und effizient Feuchtigkeit aus Räumen entfernen müssen. Egal, ob nach einem Wasserschaden, bei der Bautrocknung in Neubauten oder der Schimmelsanierung in Kellern – dieses Gerät meistert jede Herausforderung mit Leichtigkeit. Dank seiner robusten Bauweise und dem soliden Kunststoffgehäuse ist es extrem widerstandsfähig gegen Schmutz und die Strapazen des Baustellenalltags.  Maximale Leistung, minimale Mühe Mit seinem Rollkolbenkompressor ist dieses Trocknungswunder sofort einsatzbereit, selbst wenn es gerade transportiert wurde. Die Handhabung ist denkbar einfach: aufstellen, einschalten, fertig. Die integrierte Wasserpumpe sorgt für einen wartungsfreien Dauerbetrieb, da sie das gesammelte Wasser automatisch abpumpt. So können Sie das Gerät unbeaufsichtigt arbeiten lassen und sich auf andere Dinge konzentrieren.  Durchdacht und flexibel Die praktische Bauweise macht den Bautrockner zum perfekten Werkzeug für Profis und Heimwerker gleichermassen. Er ist tragbar, fahrbar dank leichtgängiger Rollen und lässt sich zudem stapeln, was Lagerung und Transport erheblich erleichtert. Die integrierte Kabelaufwicklung sorgt für Ordnung. Für spezielle Anforderungen kann ein externer Hygrostat angeschlossen werden, um die Luftfeuchtigkeit präzise zu steuern, oder ein Abluftschlauch, um die trockene Luft gezielt zu leiten. So passt sich das Gerät perfekt Ihren Bedürfnissen an.  Die wichtigsten Vorteile auf einen Blick: Schnelle und effiziente Trocknung: Ideal für Wasserschäden, Neubauten und Renovierungen. Wartungsfreier Betrieb: Dank der integrierten Kondensatpumpe. Extrem robust: Kompaktes, stabiles Kunststoffgehäuse, das auch raue Umgebungen aushält. Maximale Flexibilität: Tragbar, fahrbar, stapelbar und in jeder Position transportierbar. Einfache Handhabung: Plug-and-Play-Design für sofortige Inbetriebnahme.     Technische Daten Entfeuchtungsleistung (30°C/80% r.F.) 21 l/24h Luftleistung 375 m³/h Betriebstemperaturbereich 5-35 °C Betriebsfeuchtigkeitsbereich 30-90 % r.F. Leistungsaufnahme 380 W Stromzufuhr 230 V/1ph/50 Hz Kältemittel R290 Lautstärke 60 dB(A) Kompressor Rollkolben Produktgrösse (L x B x H) 360 x 330 x 490 mm Verpackungsgrösse (L x B x H) 410 x 430 x 570 mm Netto-/Bruttogewicht 20/22 kg Garantie 2 Jahre     Informationsvideos  

Learn more More Fewer

The combination of compact dimensions and high dehumidification performance makes this model ideal for construction drying and drying after water damage. In addition, the dehumidifier is excellent for keeping commercial properties, archives, and production areas dry. Thanks to its two large wheels and practical handle, it can be easily moved across various objects.   Operation 'Through the digital control panel at the front, the desired target humidity can be selected in 1% increments between 40-80%. Continuous operation is also possible. The set values can be saved at the push of a button. This way, in the event of a power interruption, operation will automatically continue with unchanged settings as soon as the power supply is restored.'  The humid room air is drawn in from the front and cleaned of dust and dirt by a pull-out, easy-to-clean filter. The dried air is then blown out at the back. The display shows the currently measured humidity.   The water extracted from the air can be collected in the inserted bucket or discharged directly through a hose (suitable inner diameter: 12 mm). A float automatically interrupts operation when the bucket is full. If the water is discharged through the hose, it first passes through the bucket to which the hose connector is attached. This system is very safe: if the hose is clogged, kinked, or not properly laid, the water backs up into the bucket. When the bucket is full, operation stops. Overflow onto the floor is therefore not possible, unlike dryers where the hose is directly attached to the drip tray.     Important functions   • Digital control and side-mounted operating hour meter• High efficiency thanks to automatic hot gas defrosting• Robust housing with two large running wheels and guide handle• Easy operation• Built-in hygrometer• Water container with automatic shut-off when full• Possibility to connect a hose for direct drainage of condensate• Air filter     Suitable for • Drying of commercial spaces and archives• Drying of water damage• Building drying• Industry and Production• Rental  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers"Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."      Technical data   dehumidification performanceat 20 °C / 60 % r.H.at 30 °C / 80 % r.H.   20.3 liters / day45.6 liters / day Air volume max. 350 m³/ h Maximum room size 115 m² (280 m³) Temperature range 5 - 35 °C Moisture range technical Moisture Range Practice 35 - 90 % r.F.40 - 90 % r.H. (lamella evaporator) voltage 220 - 240 V/50 Hz Nominal current consumption max. 4 A Power consumption max. 900 W Recommended Coverage 10 A Plug Connection cable with EU plug and Swiss fixed adapter refrigerant R290 (GWP: 3) Bucket + Hose connection 5.7 liter bucket and direct hose connection (suitable hose 12mm inner diameter) Operating noise 55 dB(A) at 1 m distance52 dB(A) at a distance of 3 m Masse (B x H x T) 422 x 820 x 580 mm Weight 30 kg Automatic defrosting Heissgas Attitude Digital Operator Panel Ventilator axial, single-stage blower Compressor Rolling piston Prefilter and operating hour meter and Continuous operation possible and Display and Memory function yes (set values saved on button press) Guarantee 2 years

Learn more More Fewer

Oasis dehumidifiers have been a common sight on construction sites for years. They are also well suited for keeping damp garages, archives, and basements dry. This new version under the "Krüger" brand replaces the previous "Airsec165" and is now called "Airsec11". The switch to the new, environmentally friendly refrigerant R290 also brings an improvement in the efficiency of the device. Additionally, the weight has been reduced by a good 2 kg, which provides relief, especially in professional use. Due to the stable, wide-mesh cooling part made of aluminum tubes, the Airsec/Oasis construction dryers are less susceptible to construction and gypsum dust and can be cleaned very easily.Characteristics• robust steel sheet housing• Front made of plastic• 4 four wheels, 2 side troughs/carry handles• removable coarse dust filter• mechanical hygrostat (therefore also suitable for operation with a timer)• Water container (8 liters) with float (interrupts operation when bucket is full)• Hose connection (3/4" thread at the bottom of the tub)• Light when bucket full• Heissgas-Abtauung• Cable with 3-pin Swiss plugRecommended Application ExamplesIn cooler basements, garages, civil protection facilities, winter construction sites, storage rooms   dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +40°C thanks to hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C / 80% r.H. 28 Liters / 24h28°C / 60% r.H. 16.8 Liters / 24h20°C / 60% r.H. 10.54 Liters / 24h15°C / 60% r.H. 7.19 Liters / 24h(r.H.=relative humidity)Tip The device is often placed on a wall console. In this case, the wheels should be removed and the device should be positioned sideways against the wall to ensure that the air intake (at the back of the device) is not blocked, allowing for optimal circulation. You can also obtain the pre-made consoles from the company Krüger from us.Tip No. 2: suitable coupling for hose connection"Order the original coupling for Oasis devices if you want to drain the water directly through a hose. Most commercially available couplings do not fit optimally due to the slightly altered connection thread of the collection tray."  Technical data   Krüger Art.-No. 343.01 Tension 230 V / 50 Hz Power consumption 360W normal operation (or 520W during defrosting process) Sound pressure level 1 m distance approx. 55dB (A) (our measurement) (Manufacturer's specification: 51 dB(A)) dehumidification performance 28 liters/day (30°C / 80% r.H.)  amount of recirculated air 510 m³/h free blowing condensate tank approx. 8 liters (manufacturer's specification 9 L) Compressor Rotary compressor  refrigerant R290 Dimensions (H x W x D)     560 x 38 x 36 cm Weight 23.5 Kg cessation of operations Hygrostatrad Ambient temperature 3°C ~ 40°C Area of application up to 80m² Swiss plug Yes   hose connection Yes Guarantee: 2 years

Learn more More Fewer

The DH25 is a powerful dehumidifier that is ideal for medium-sized rooms and environments with high humidity levels. It impresses with its reliable dehumidification performance in both cool and temperate spaces. As an evolution of the FDK44 model, it offers digital control and a slightly increased dehumidification capacity.OperationOperation is incredibly simple: The desired target humidity is set on the control panel. If the measured humidity exceeds the set value, the dehumidifier automatically starts operating; otherwise, it pauses. The display always shows the current room humidity. The DH25 unleashes its full dehumidification power especially for year-round drying of single or double garages, archives, basements, or for stabilizing humidity in laundry and drying rooms. Thanks to its highly advanced hot gas defrosting, the DH25 can be used down to just above freezing point. Its efficient dehumidification performance in low humidity ranges, where other dehumidifiers can no longer extract moisture from the air, is particularly noteworthy. The room air is drawn in from one side of the housing and cleaned through an industrial, reusable filter. The dried air is blown into the room from the opposite side, creating effective air circulation. The setup of the DH25 is flexible: it can be placed both on the floor and on a free shelf, with the wheels being lockable for a secure stand. The condensate is drained directly via a hose connection. It is important that the hose has a constant slope towards the drain to ensure smooth drainage. The DH25 is characterized by its solid and high-quality construction. The housing is made of white powder-coated metal, while the internal components meet professional standards. This allows for uninterrupted continuous operation without supervision. Even after a power failure, the dehumidifier resumes operation with the previous settings, making it ideal for use with timers or smart home systems. For easy mobility, the DH25 is equipped with four sturdy wheels (with brakes) and two foldable carrying handles. Versatile application• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for continuous dehumidification of tempered but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +35°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 40 liters20°C/80% r.H.: 16 Liters20°C/60% r.H.: 12 Liters10°C/60% r.H.: 7 Liters(r.H.=relative humidity)   Optional accessoriesThe delivery includes the ready-to-plug-in device. If needed, we offer various suitable accessories, such as:• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped away to a higher location)Stronger designThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Trotec DH25S Tension: 230V / 50Hz Power consumption:  max. 700W / 510W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 1 m distance 53 dB(A)2.5 m distance 51 dB(A) Dehumidification capacity: 40 liters/day (30°C / 80% r.H.)  Air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) Condensation tank: No tank / only hose connection possible Compressor:     Rotary compressor  Refrigerant:   R290 (152gr.) Dimensions (L/H/D):      580 x 455 x 350 mm (including wheels and carrying handles) Weight:    30 Kg Business closure: Digital Ambient temperature: 1°C ~ 35°C  Area of application: up to 100m² Swiss plug:  EU plug with Swiss fixed adapter, 5m cable Hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

This extremely powerful dehumidifier is specifically designed for demanding dehumidification tasks, such as the rapid drying of water damage, effective construction drying in large or heavily damp rooms, as well as the gentle drying of herbs. Due to its high performance, this dryer is available exclusively with a hose connection, making the use of a water container unnecessary and allowing for continuous operation.The dryer is to be set up freestanding in the room, with the clearly arranged control panel and the intake area for the humid room air positioned at the front of the device for easy access. The generated dry air is distributed widely in the room with high volume and strong airflow through the side outlet to ensure efficient and uniform dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier.SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.condensationThe condensate is drained directly through a hose into a lower-lying drain. The dryer does not have a bucket. A hose piece of about one meter is included in the delivery.Temperature protectionIf the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal. dehumidification performanceThe dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 90.0 Liters / 24h (1080W)27°C / 60% r.H. = 50.0 Liters / 24h (920W)20°C / 80% r.H. = 45.0 liters / 24h20°C / 60% r.H. = 27.0 Liters / 24h10°C / 60% r.H. = 13.0 Liters / 24h(r.H.=relative humidity)    Characteristics• Dehumidification capacity of up to 90 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Memory function for storing data and for automatic resumption of operation after power interruption• Clear display including current humidity, target humidity, and status overview• Equipped with a high-efficiency rotary compressor (Rotary Compressor)• Automatic professional defrost function• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)• Powder-coated metal housing/ metal bracket• Very easy mobility due to transport handles and 2 large and 2 smaller running wheels• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required)• Swiss plug 230 V • CFC-free and compliance with WEEE standards, CE, REACH, GS, and RoHS certified.• Environmentally friendly refrigerant R290Examples of useDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.  Technical data   Tension 220-240V / 50Hz Power consumption max. 1080W (4.8A) Sound pressure level 1 m distance 62 dB(A)2.5m distance 59 dB(A)(our measurement) dehumidification performance max. 90 liters/24h (30°C / 80% r.H.)  Recirculation air volume 850 m³/h (free-blowing) Condensation tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R290 (GWP: 3) Dimensions (H x W x D)  1010 x 584 x 575 mm Weight 54 Kg Operational cessation per key press / digital display Ambient temperature 5°C ~ 35°C Area of application Rooms from min. 14m² to max. 230m² (650m³) Swiss plug Yes   hose connection Yes operating hour meter No Guarantee 2 years

Learn more More Fewer

A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

The 650S is a robust and powerful construction dryer that stands out for its versatility. It effortlessly handles demanding tasks such as drying after water damage, new construction drying, and maintaining dryness in heated and unheated storage rooms. Manufactured in a specialized European facility, this dehumidifier impresses with its high-quality workmanship and reliable operation. The durable construction of the 650S guarantees a long lifespan, while the easy maintenance and low upkeep costs make operation even more economical. Despite its impressive performance and quality, the 650S is available at an extremely attractive price, making it an excellent choice for professional users.Easy to use The desired target humidity can be continuously regulated between 32 - 100 % using a mechanical hygrostat, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 925 cubic meters per hour. With its stable cart construction and large wheels, frequent changes of location can be easily carried out.     Direct hose connection and optional pump kit   Due to its very high dehumidification performance, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a slope towards the drain. If this is not possible, a suitable pump kit is optionally available, which can pump the water upwards and also outwards.   The operating switch is protected against dust and splashes by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position.     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in the range above 40% humidity. Technically, the dryer can be used at room temperatures down to about 5°C, even in unattended continuous operation.     Optional counters   Included in delivery is no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 91 liters / day Air volume 925 m³/ h Maximum room size 230 m² (550 m³) Minimum room size 4 m² Temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. voltage 220 - 240 V/50 Hz Nominal current consumption max. 9.5 A Power consumption max. 2100 W Recommended Coverage 16 A Cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter Operating noise 56 dB(A) at 1 m distance53 dB(A) at a distance of 2.5 m Dimensions L x W x H 616 x 511 x 1022 mm (incl. guide bracket) Weight 52 kg Automatic defrosting Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower Prefilter and Timer no (operation on timer possible) Continuous operation possible and Memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 16 mm Pump optional available (not included in the delivery) Guarantee 2 years

Learn more More Fewer

The AD20 is a robustly built condensation dryer. It is lightweight, portable, and can be carried like a suitcase. Thanks to the BlueDry technology, the AD20 reliably dehumidifies even at low humidity and temperature. Another advantage is the built-in automatic condensate pump with overflow protection (pumping height up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Robust housing made of impact-resistant plastic. It is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used to connect additional devices.Features and Benefits• Housing: made of robust, impact-resistant, and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Automatic water pump with overflow protection integrated as standard.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other.  Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 18.0 liters / 24h (Power consumption: 350 W)27°C / 60% r.H. = 11.0 liters / 24h (Power consumption: 310 W)20°C / 60% r.H. = 9.0 liters / 24h (Power consumption: 260 W)10°C / 70% r.H. = 5.0 Liters / 24h (Power consumption: 215 W)(r.H.=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption:  max. 350W Sound pressure level:  1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification capacity: max. 18.0 liters / day (30°C / 80% r.H) bucket / pump No bucket. Integrated pump with overflow protection, 4 m delivery height. Recirculation air volume level 1/2 200 / 270 m³/h refrigerant:   R1234yf Dimensions (H/W/D):      420 / 320 / 500 mm Weight:    16.4 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug:  Yes   Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The AD40 is versatile and so lightweight that it can be carried like a suitcase. Thanks to the BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperature.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Water bucket or optional pumpThe water collection container (6.8 liters) is easy to remove, carry, and empty. It is located inside, with the water level of the bucket measured by a float. When full, it automatically interrupts operation, and operation automatically restarts when the bucket is replaced. An optional matching pump kit is available, which is versatile and suitable for unattended continuous operation.Robust housingThe housing is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used for connecting additional devices. Four robust, stable plastic feet for floor placement. Stackable with other Aerial Aercube devices.Characteristics  • Case: made of robust, impact-resistant, and UV-resistant plastic, lightweight. Fixed points for AERCUBE® lashing system. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Optional pump kit available.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other. Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H = 35.0 Liters / 24h (Power consumption: 520W) 27°C / 60% r.H. = 22.0 Liters / 24h (Power consumption: 430W) 20°C / 60% r.H. = 15.0Liters / 24h (Power consumption: 370W) 10°C / 70% r.H. = 8.0 Liters / 24h (Power consumption: 300W)(r.H.=relative humidity)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 530W Sound pressure level:  1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification capacity: max. 35.0 liters / day (30°C / 80% r.H) Bucket: Capacity 6.8 liters, Operational interruption due to swimmer Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant:   R407C Dimensions (H/W/D):      580 / 390 / 450 mm Weight:    25 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug:  Yes   hose connection:  Connection fitting for direct hose connection Optional Pump Kit Operating hour meter: Yes Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

Professional dehumidifier for demanding drying tasks, available in bucket or pump.The Fral F96 dehumidifier is a robustly built quality dryer for construction, trade, and industry. It has a very powerful performance and is also suitable as a large room dehumidifier for spaces up to 200m² (or 500m³) starting from 1°C! Relatively quiet operation.     Due to well-developed hot gas defrosting, the F96 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity areas, where the F96 still extracts water from the air, in conditions where other dryers have long stopped producing any drops (according to our tests, clearly below the threshold of 30% relative humidity).It is suitable for unattended continuous operation. The condensate can either be collected in the removable 15-liter bucket (a scale measures the weight and automatically interrupts operation when the bucket is full), or it can be drained directly via a hose connection. The F96 is mounted on 2 stable wheels and has a metal handle for easier mobility. Due to its size and the solid metal housing, it may need to be carried by two people up stairs.It is suitable:• as a construction dryer• Large area dehumidifiers for commercial and industrial use• for dehumidification of basements up to 200m2 and in case of water damage• for unattended continuous operation• for operation on a timer"When the desired target humidity is reached, the device completely shuts down. The built-in operating hour counter clearly and quickly shows how long the device has been in use."This construction dryer fits any standard 3/4-inch coupling, e.g. Gardena, etc. available from us or at your local hardware store.   dehumidification performance   Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 80 liters (60%: 54 liters) 20°C/80% r.H.: 48 liters (60%: 32 liters)15°C/80% r.H.: 31 liters (60%: 21 liters)10°C/80% r.H.: 26 liters (60%: 19 liters)5°C/80% r.H.: 19 liters (60%: 7 liters)(r.H.=relative humidity)2 year guarantee   Technical data Voltage: 230V / 50HzPower consumption: max. 1350W / 980W (at 20°C/60% r.H.)Sound pressure level: 1 m distance 55 dB (A) (our measurement) / 2.5 m distance 53 dB(A) (manufacturer's specification)Dehumidification capacity: 80 liters/day (30°C / 80% r.H.) Air volume: 550 m³/h (built-in) 780 m³/h (free-blowing)Condensate tank: approx. 15 litersCompressor:Rotary Compressor refrigerant: R407cDimensions (H/W/D): 113 x 67 x 77 cmWeight: 54 kgOperational setting: HygrostatAmbient temperature: 1°C ~ 35°CApplication area: up to 200m² (heated rooms) or 150m² (unheated)Swiss plug: Yes  Hose connection: YesOperating hour counter: YesWarranty: 2 yearsSeries: Fral FDNP96SHEAN Codes: 0745114671578 F96 with bucket CH plug0745114671585 F96 with pump CH plug

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935 features both an 8-liter condensate tank and a connection nozzle for direct drainage of the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 34.0 liters / 24h (Power consumption: 610 W)20°C / 60% r.H. = 16.5 liters / 24h (Power consumption: 450 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 610 W max. Sound pressure level 2.5 m distance 51 dB(A) dehumidification performance     34 liters/day (30°C / 80% r.H.)  condensate tank Approx. 8 liters   Air volume level 1 / 2 300 / 420 m³/h (Night mode: 300 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   860 x 392 x 508 mm   Weight 35.4 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-935S features both an 8-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically detects the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. The air is expelled through two Ø100mm nozzles, which blow the air into the room at a good speed. Air hoses can also be attached to these nozzles if the dry air needs to be directed precisely to a specific location. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 28.0 liters / 24h (Power consumption: 785 W)20°C / 60% r.H. = 13 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 1-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Equipped with a 1kW electric heating element and 2x Ø100mm duct connections• Maintenance and service friendly     Technical data  Tension 230V / 50Hz Power consumption 785 W max. (1785 W with additional heating) Recording supplementary heating  +1000W  Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     28 liters/day (30°C / 80% r.H.)  condensate tank Approx. 8 liters   air volume 400 m³/h  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   860 x 391 x 505 mm   Weight ca. 36 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer

A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs.   The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.)  Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H / W / D):      690 x 390 x 470 mm Weight:    32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

Drying technology at the latest standard! The 9 series of Aerial construction dryers has been completely developed to meet the needs for use on construction sites, in industry, and for water damage drying. The dryers come standard with a MID-approved kWh meter as well as a non-resettable hour meter. Thanks to the CC 6 control, the devices are compatible with the remote monitoring solution "Simplify," allowing for convenient remote operation monitoring.The AD-955 features both a 13-liter condensate tank and a connection nozzle for directly draining the condensate via a hose. Additionally, a suitable pump kit is available, which automatically recognizes the device upon installation. The humid room air is drawn in at the front of the housing, and the dry air is blown out at the back. In the intake area, a reusable industrial filter mat cleans the air and ensures that flying particles do not enter the device.     service   The operation is carried out via the operator panel mounted on the side. With just three buttons, it is comfortable and clear. It displays all important information, and the desired values can be set at the push of a button.• Simple 3-button operation • Color-coded status display of room conditions - red, yellow, green • Complete graphic display, no translation required     High service friendliness   The housing has been designed to be opened with minimal effort. This allows internal components to be easily and quickly cleaned or replaced if necessary.     Features at a glance   • Control unit CC 6 compatible with the remote monitoring solution Simplify• OEM versions available on request (minimum order quantity 50)• The use of standardized components from the Dantherm Group's product portfolio ensures quick access to spare parts.• Integrated interface for accessories (dew point kit and external hygrostat)• Automatic detection of the pump kit• Various drainage options: Standard with Ø15mm hose connection, water tank, and optional pump set• MID-approved kWh meter and non-resettable hour meter as standard• 2-stage fan • Integrated night mode for quieter operation in inhabited rooms• R454C refrigerant, non-toxic and non-flammable, with extremely low GWP (Global Warming Potential)• Large wheels• Telescopic Handle• Stackable• Maintenance and service friendly     dehumidification performance The dryer can be used over a temperature range of +5 °C to +30 °C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 53 liters / 24h (Power consumption: 830 W)20°C / 60% r.H. = 22.5 liters / 24h (Power consumption: 560 W)(r.H.=relative humidity)     Technical data  Tension 230V / 50Hz Power consumption 830 W max. Sound pressure level 2.5 m distance 53 dB(A) dehumidification performance     53 liters/day (30°C / 80% r.H.)  condensate tank Approx. 13 liters   Air volume level 1 / 2 290 / 550 m³/h (Night mode: 290 m³/h)  Compressor Rotary compressor  refrigerant R454C Dimensions (H x W x D)   845 x 452 x 538 mm   Weight 41.8 Kg cessation of operations CC 6-Operating Panel, wireless connection with Simplify remote monitoring possible Ambient temperature ambient humidity 5 °C - 30 °C  30 % r.F. - 90 % r.F. Swiss plug Yes, cable length approx. 5 m   hose connection 15 mm hose inner diameter guarantee 2 years

Learn more More Fewer