ACTIONS

AirgoClean One – High-Performance Air Purifier with H14 HEPA Filter System The premium air purifier from the Trotec brand for effective virus filtration and continuous air purification in demanding environments. It is ideal for meeting rooms, waiting rooms, doctor's and veterinary practices, law firms, and high-end private residences. Developed and manufactured in Germany, this high-performance air purifier meets the highest quality standards and is equipped with efficient, state-of-the-art brand components. The high effectiveness of the H14 HEPA filter system is scientifically proven. The device features a manual control panel and a remote control. It can also be controlled and monitored via Bluetooth using a mobile phone or tablet app. Key Features and Performance The AirgoClean One ensures reliable air purification through mechanical filter technology and achieves a separation efficiency of 99.995% of all airborne particles down to 0.1 micrometers in size. Eliminated Pollutants and Particles (Separation efficiency ≥ 99.995%): Bacteria and viruses (e.g., SARS-CoV-2, influenza) Fine dust (including ultra-fine dust PM1) Pollen (flower dust) Volatile organic compounds (VOC) Dust mites and house dust Mold spores Animal dander Pet odors Filter System and Technology The AirgoClean One exclusively relies on established mechanical filter technology, without alternative methods such as UV-C, ionization, ozone, or electrostatic filtration, to guarantee 99.995% virus-free clean air. Filter Stage Type Function 1 (Pre-filter) Synthetic pre-filter mat Captures coarse particles (dust, hair). 2 (F7 Pre-filter) F7 filter (ISO ePM10 85%) Effectively retains coarse and fine dust. 3 (HEPA) H14 HEPA filter (according to EN 1822) Separation efficiency ≥ 99.995% for particles from 0.1 - 0.3 µm (viruses, bacteria, allergens). 3 (Optional) Activated carbon filter Neutralizes odors (tobacco, pets, kitchen) as well as formaldehyde   Technical Data General Information Trotec Article Number 1580001100 Fan Type radial Dimensions and Weight Length without packaging 435 mm Width without packaging 400 mm Height without packaging 835 mm Weight without packaging 17 kg Weight including packaging 24 kg Product and Room Information Recommended Room Size (Area) 78 m² Recommended Room Size (Volume) 195 m³ Fan Speeds 6 Power and Connections Mains Connection and Frequency 230 V, 50/60 Hz Power Consumption 170 W Cable Length 1.4 m Connection Plug Type CEE 7/7 + Fixed adapter for Switzerland Number of Batteries per Device 1 Filter Properties Filter Efficiency 99.995% Suspended Particulate Filter HEPA-H14 (EN 1822) IP Protection Class IP Protection Class IP44 Protection Against Contact Protected against access with a wire (Ø ≥ 1.0 mm) Protection Against Water Protection against splashing water from all directions Protection Against Foreign Objects Protected against solid foreign objects Ø ≥ 1 mm Air Volume (Typical Values) Level/Application Air Volume [m³/h] 1 35 2 115 3 230 4 355 5 475 6 600 Max. 600 Sound Level Level/Application (1 m distance) Sound Level dB(A) 1 19 2 34 3 42 4 48 5 52 6 57 Level/Application (3 m distance) Sound Level dB(A) 1 11 2 25 3 33 4 40 5 44 6 49 Scope of Delivery Battery(ies) HEPA H14 Filter Pre-filter F7 Pre-filter mat Silencer Functions and Features Air quality display (numeric/color bar) Air quality history 24h / 14 days Air quality sensor (VOC) CO₂ sensor Particle sensor PM1 / PM2.5 detection Temperature / humidity display Automatic operation (note: not recommended in virus filter mode) App control / IR remote control Digital / Touch display Turbo mode Timer function / Memory function Night mode Tamper protection / Child lock / Lock button Silencer Filter Change Indicator Main filter (visual and acoustic) Pre-filter (visual and acoustic) General filter replacement indicator Mobility Carrying handle bar Plastic transport castors 2 Year Warranty   Instruction Manuals Instruction Manual German PDF User Manual English PDF -> Replacement filters and accessories -> More information about the benefits and use of air purifiers

Learn more More Fewer

The new WT230D is a successful evolution of its predecessor model WT230U. It is slightly more powerful in dehumidification performance and is clearly among the best in terms of efficiency with significantly lower consumption. An ideal device for single-family homes in combination with a tumbler.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 7m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted.Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the lower part are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 18 m² Drying performance: 1.63 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 660W or 420W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 59 dB(A) 2.5 m distance 67 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 35.5 liters / 24h (power consumption: 569 W) at 27°C / 60% r.H. = 21.1 liters / 24h (power consumption: 487 W) at 20°C / 60% r.H. = 14.6 liters / 24h (power consumption: 420 W) at 10°C / 70% r.H. = 6.1 liters / 24h (power consumption: 368 W) air circulation volume: 750 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

From the "Topten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms up to 15m.² and approx. 40m of clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively narrow metal housing integrates optimally into the room's appearance. For installation, the support rail is fixed to the wall with two screws, and the dryer can then be easily hung. Rubber buffers prevent the transmission of (very low) vibrations to the wall. The condensate is directed via a hose either directly into a drain or into a bucket placed under the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out from the front for cleaning.  Drying programs:On the side of the housing is the control. A toggle switch is used to select whether you want the "Drying" mode or "Room Monitoring". A rotary switch can be used to easily adjust the desired residual moisture.Clothes drying: The drying program can be started at the push of a button. The dehumidifier runs until the laundry is dry and then automatically switches off. Room Monitoring: The general room monitoring serves to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the value set on the dial, with an ideal value for this mode being around 55-60%. Unlike the laundry drying programs, the dryer never completely turns off in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also reactivate.  You can only get the Dryfix Swiss from us! It is exclusively manufactured for our company in a specialized factory in Switzerland.Ambient temperatureTechnically, the "Swiss" tumble dryers can be used down to 5°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wall  The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 1m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose if possible. If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data drying room: up to 15m² Drying performance: 1.73 Kg/h Consumption per kg of laundry: 0.307 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 530W Sound pressure level (our measurement): 1.0 m distance 60 dB(A) 2.5 m distance 57 dB(A) Dehumidification capacity: 26 liters/day (30°C / 80% r.H.) air circulation volume: 600m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410A Dimensions (H/W/D): 55 x 57 x 26 cm (Depth: from wall to front) Weight: 35 Kg    Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Special features: Made in Switzerland

Learn more More Fewer

The new WT230D is a successful evolution of its predecessor model WT230U. It is slightly more powerful in dehumidification performance and is clearly among the best in terms of efficiency with significantly lower consumption. An ideal device for single-family homes in combination with a tumbler.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 7m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted.Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the lower part are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 18 m² Drying performance: 1.63 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 660W or 420W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 59 dB(A) 2.5 m distance 67 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 35.5 liters / 24h (power consumption: 569 W) at 27°C / 60% r.H. = 21.1 liters / 24h (power consumption: 487 W) at 20°C / 60% r.H. = 14.6 liters / 24h (power consumption: 420 W) at 10°C / 70% r.H. = 6.1 liters / 24h (power consumption: 368 W) air circulation volume: 750 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

This extremely powerful dehumidifier is specifically designed for demanding dehumidification tasks, such as the rapid drying of water damage, effective construction drying in large or heavily damp rooms, as well as the gentle drying of herbs. Due to its high performance, this dryer is available exclusively with a hose connection, making the use of a water container unnecessary and allowing for continuous operation.The dryer is to be set up freestanding in the room, with the clearly arranged control panel and the intake area for the humid room air positioned at the front of the device for easy access. The generated dry air is distributed widely in the room with high volume and strong airflow through the side outlet to ensure efficient and uniform dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier.SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.condensationThe condensate is drained directly through a hose into a lower-lying drain. The dryer does not have a bucket. A hose piece of about one meter is included in the delivery.Temperature protectionIf the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal. dehumidification performanceThe dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 90.0 Liters / 24h (1080W)27°C / 60% r.H. = 50.0 Liters / 24h (920W)20°C / 80% r.H. = 45.0 liters / 24h20°C / 60% r.H. = 27.0 Liters / 24h10°C / 60% r.H. = 13.0 Liters / 24h(r.H.=relative humidity)    Characteristics• Dehumidification capacity of up to 90 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Memory function for storing data and for automatic resumption of operation after power interruption• Clear display including current humidity, target humidity, and status overview• Equipped with a high-efficiency rotary compressor (Rotary Compressor)• Automatic professional defrost function• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)• Powder-coated metal housing/ metal bracket• Very easy mobility due to transport handles and 2 large and 2 smaller running wheels• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required)• Swiss plug 230 V • CFC-free and compliance with WEEE standards, CE, REACH, GS, and RoHS certified.• Environmentally friendly refrigerant R290Examples of useDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.  Technical data   Tension 220-240V / 50Hz Power consumption max. 1080W (4.8A) Sound pressure level 1 m distance 62 dB(A)2.5m distance 59 dB(A)(our measurement) dehumidification performance max. 90 liters/24h (30°C / 80% r.H.)  Recirculation air volume 850 m³/h (free-blowing) Condensation tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R290 (GWP: 3) Dimensions (H x W x D)  1010 x 584 x 575 mm Weight 54 Kg Operational cessation per key press / digital display Ambient temperature 5°C ~ 35°C Area of application Rooms from min. 14m² to max. 230m² (650m³) Swiss plug Yes   hose connection Yes operating hour meter No Guarantee 2 years

Learn more More Fewer

The top dryer for larger spaces. The FDK performs reliable heavy-duty work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round drying of garages, industrial halls, or in water management facilities. You can only get this model from us; comparable products on the market cost twice as much.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% r.H.: 80 liters / 24 h20°C/80% r.H.: 45 liters / 24 h20°C/60% r.H.: 30 liters / 24 h10°C/60% r.H.: 18 Liters / 24 h(r.H.=relative humidity)Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards) Smaller versionThe device is also available in the smaller version "FDK44" -> DetailsComparable devices: Lunor L75     Technical data  Tension 230V / 50Hz Power consumption 1020W (at 20°C/60% r.H.), max. 1550W Sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% r.H.)  amount of recirculated air 1100 m³/h (installed, free-blowing approx. 1350 m³/h) condensate tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R410A Dimensions (L x H x D)  73 x 58 x 58 cm Weight 48 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C  Area of application bis 250m²/1000m³ Swiss plug Yes   hose connection Yes guarantee 2 years      

Learn more More Fewer

The new WT230D is a successful evolution of its predecessor model WT230U. It is slightly more powerful in dehumidification performance and is clearly among the best in terms of efficiency with significantly lower consumption. An ideal device for single-family homes in combination with a tumbler.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 7m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted.Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the lower part are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 18 m² Drying performance: 1.63 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 660W or 420W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 59 dB(A) 2.5 m distance 67 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 35.5 liters / 24h (power consumption: 569 W) at 27°C / 60% r.H. = 21.1 liters / 24h (power consumption: 487 W) at 20°C / 60% r.H. = 14.6 liters / 24h (power consumption: 420 W) at 10°C / 70% r.H. = 6.1 liters / 24h (power consumption: 368 W) air circulation volume: 750 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

Those who like their laundry to dry faster will find the WT 240D to be a good and powerful device. The WT240 is the most economical of the new WT series from Aerial. A reliable helper for frequent use in the laundry room.Operation The easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 8m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  Mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as a 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request. Important:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 20 m² Drying performance: 1.93 Kg/h Consumption per kg of laundry:   0.26 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 620W or 440W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 62 dB(A) 2.5 m distance 68 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 36.5 L/24h (Power consumption: 570 W) at 27°C / 60% r.H. = 21.6 L/24h (Power consumption: 500 W) at 20°C / 60% r.H. = 16.8 L/24h (power consumption: 440 W) at 10°C / 70% r.H. = 7.2 L/24h (power consumption 390 W) air circulation volume: 830 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The WT 250D is suitable not only for intensive drying tasks in single-family operations but also meets performance expectations in drying rooms shared by multiple parties. With a drying capacity of approximately 3 kg of laundry per hour, this model dries in about 2.5 hours, which is what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 9m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 35 m² Drying performance: 2.95 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 950W or 677W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 61 dB(A) 2.5 m distance 68 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 57.1 Ll/24h (Power consumption: 570 W) at 27°C / 60% r.H. = 24.1 L/24h (Power consumption: 500 W) at 20°C / 60% r.H. = 23.0 L/24h (Power consumption: 440 W) at 10°C / 70% r.H. = 13.4 L/24h (Power consumption: 390 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 42 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The heavy-duty worker among the new Aerial WT dryers! It is specially designed for intensive use and dries laundry quickly and reliably with easy operation. With a drying capacity of approximately 3.6 kg of laundry per hour, this model dries in about 2 hours what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan levels: The WT280 has one (powerful) fan level. This provides quick drying results, even with a lot of laundry and long drying rooms of up to about 10m.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.    mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable trolleys in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 40 m² Drying performance: 3.68 Kg/h Consumption per kg of laundry:   0.29 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 1350W or 950W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 2.5 m distance 67 dB(A)   Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 79.2 L/24h (Power consumption: 1390 W) at 27°C / 60% r.H. = 46.6 L/24h (Power consumption: 1080 W) at 20°C / 60% r.H. = 32.2 L/24h (power consumption: 990 W) at 10°C / 70% r.H. = 20.3 L/24h (Power consumption: 800 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 43 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer