Unlike conventional sandbags, this granulate bag is very space-saving during transport. The jute bag contains highly absorbent Dryfix granulate and can absorb up to 16 liters of water in a short time. This creates a granulate that fills the entire bag. Subsequently, its application is comparable to sandbags and is ideal for holding back floodwaters or protecting buildings and basement entrances.     Advantages at a Glance   • Space-saving storage before use and during transport • Air-tight packaging that protects against moisture • Environmentally friendly, tear-resistant material made from high-quality jute • Ready for use immediately after a short activation, in just 2 minutes, 10 liters of water have already been absorbed. • Problem-free stacking of protective barriers • No procurement and elaborate refilling of sand necessary     Application   • Remove BAG from the protective packaging. • Activate in water for approx. 2 min. (use existing standing water, immerse in a water basin, or pour over with sufficient water). • Place at the desired location (doors, basement windows, etc.) and stack like conventional sandbags.           

Learn more More Fewer

This handy floor fan, made of sturdy metal with aluminum rotors (30 cm diameter), offers a flexible and powerful solution for a variety of applications. The fan head can be tilted vertically by 100°, allowing the airflow to be directed precisely in any desired direction. With three speed settings, a practical carrying handle, and an excellent price-performance ratio, this fan is an ideal choice for everyday use. The use of a copper coil ensures a long lifespan and reliable operation. The fan is excellent for supporting drying after water damage or for effective air circulation in any rooms. Thanks to its high reliability, it is also suitable for unattended continuous operation.Characteristics• Fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's airflow direction is continuously adjustable horizontally by 100°.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.50 m in length• No assembly required, the fan is ready to use immediately.• RoHS and CE compliant • Suitable wall/ceiling mount available as an accessory   Technical data  Power consumption max. 37 Watts Rotordurchmesser 30 cm Airflow Up to 3019 m³/h noise 1 m distance: max. 58 dB(A)2.5 m distance max. 55 dB(A) speed levels 3 Revolutions Level 1 / 2 / 3:  950 / 1100 / 1250 per minute Cable length approx. 1.50 m Connection EU plug with suitable fixed adapter for Switzerland (230V) Dimensions ( W x H x D ) 395 x 375 x 185 mm Weight 2.8 kg Trotec article no. 1.510.006.011 Guarantee 2 years Documents / Downloads   Operating Instructions German  User manual French  User manual Italian  User manual English

Learn more More Fewer

High-quality floor fan made of robust metal and the rotors (45 cm diameter) made of aluminum. The fan head is vertically adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a practical carrying handle, and a good price-performance ratio.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Large fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's airflow direction is continuously adjustable horizontally by 110°.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.50 m length• No assembly required, the fan is ready to use immediately.• RoHS and CE compliant• Suitable wall/ceiling mount available as an accessory  Technical data  Power consumption max. 100 Watts Rotordurchmesser 45 cm airflow Up to 5414 m³/h air speed max. 3.8 m/s Noise (our measurement)     1 m distance Step 1-3: 61-65 dB(A) 2.5 m distance step 1-3: 57-61 dB(A) speed levels 3 Revolutions Level 1 / 2 / 3:  900 / 1150 / 1300 per minute Cable length approx. 1.50 m Connection EU plug with suitable fixed adapter for Switzerland (230V) Dimensions ( W x H x D ) 540 x 535 x 180 mm Weight 4.5 kg Trotec article no. 1.510.006.031 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The floor fan TVM 20 D quickly provides plenty of cooling with its quiet operation and is also visually a great favorite. Due to its distinctive design, the device is also called a drum fan and its matte black look of the rotor cage and stand bracket reminds of countless professional appearances of wind machines of this type in front of and behind the cameras of large photo and film studios. Optimal for ventilation, wind generation, wind cooling, or drying - the TVM 20 D is versatile.   Made of metal and with attention to detail   "Made entirely of robust metal down to the last chrome-plated wing tip and equipped with a copper coil in the motor, the floor fan is designed for an exceptionally long lifespan. The device blows away even the hottest stagnant air from living or office spaces with a high air throughput and a blade diameter of 20 inches (about 50 cm). Additionally, with 120 watts, it has sufficient power reserves to provide adequate cooling even at escalating temperatures." With its three speed levels, the TVM 20 D is perfectly equipped for any ventilation scenario: At the control element on the back of the metal grid basket, a gently cooling airflow can be adjusted just as easily as a stiff breeze. The rotor basket can be tilted continuously 360° around its horizontal axis, ensuring that the airflow always reaches exactly where it is welcome.   Secure stance with a small footprint   As a professional, the floor fan TVM 20 D requires little space and is always a welcome sight – whether at a photo shoot, in a restaurant, or with the practical wall and ceiling mounting at a party or concert. The device also easily withstands the occasional bump – thanks to three non-slip rubber feet attached to the bottom of the stand, which ensure the fan's stable position. The carrying handle at the back also makes the fan particularly easy to handle for transport to different locations.   Here are some practical advantages at a glance: 120 watts of power 3 speed levels Adjustable tilt angle of the fan head up to 360° Front and rear protected metal grill Fan blade diameter 50 cm Stable and non-slip base for a tilt-resistant stand Long lifespan thanks to the copper coil in the motor Smooth running Practical carrying handle Unique value for money Optional available: Wall and ceiling mount for ventilating hard-to-reach areas. Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

High-quality floor fan made of robust metal and the rotors (50 cm diameter) made of aluminum. The fan head can be tilted vertically, allowing the airflow to be directed in any desired direction. The device has three speed settings, a practical carrying handle, and a good price-performance ratio.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Large fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's direction of airflow is horizontally adjustable without steps.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance engine• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.70 m length, Swiss plug• No assembly required, the fan is ready to use immediately.• Comparatively quiet operation• RoHS and CE compliant Technical data  Power consumption 120 Watts max. Rotordurchmesser 50 cm airflow Up to 9000 m³/h air speed max. 4.25 m/s Noise (our measurement): 1 m distance Step 1-3: 62-66 dB(A)2.5 m distance step 1-3: 59-63 dB(A) speed levels 3 Cable length approx. 1.70 m Connection Swiss plug 230V 3-pole (standard household socket) Dimensions ( W x H x D ) 58.5 x 57 x 19 cm Weight 6kg scope of delivery plug-in fan, no assembly required guarantee 2 years Documents / Downloads   User Manual DE - FR - IT - EN

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether living area, conservatory, or bathroom, as a supplementary heating solution, the infrared flat heater creates warmth directly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 450W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.43 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 2 A Power consumption max. 0.45 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 705 x 605 x 22 mm (without stand feet) Weight 4 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.010 Guarantee 2 years

Learn more More Fewer

High-quality floor fan made of robust metal with aluminum rotors. The fan head is adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a durable high-performance motor, and a practical carrying handle. It impresses with its good price-performance ratio and its ease of use.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation. For example, the FE50X is also in use at the Technorama, where it operates daily.Characteristics· Large fan head with plenty of recirculation· Three fan speeds, easily adjustable via a rotary switch on the back· The direction of the fan is horizontally adjustable without steps.· Made entirely of robust metal· Rotor blades made of 100% aluminum· Powerful, durable high-performance motor with copper coil· Handy, easily transportable thanks to carrying handle· Long power cable, approx. 2.40m length, Swiss plug· No assembly required, the fan is ready to use immediately.· Relatively quiet operation· Robust motor housing· RoHS and CE compliant  Technical data  Power consumption 120 Watts max. Rotordurchmesser 50 cm airflow Up to 8500m³/h, wide dispersion speed levels Three Cable length approx. 2.40m Connection Fixadapter suitable for Swiss sockets Dimensions ( W x H x D ) 61 x 62 x 26 cm Weight 6.5kg scope of delivery plug-in fan, no assembly required guarantee 2 years  

Learn more More Fewer

These infrared panels are ideal for equipping previously unheated rooms with an effective heating source or for generating localized warmth, such as at the workplace, by the sofa, or in the bathroom. The gentle heat waves are absorbed by solid materials like furniture or walls, as well as by people, providing a pleasant warmth. It is very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. "While traditional heating devices need to heat the entire room volume, heating plates can specifically heat desired areas. This saves a lot of energy and thus also costs."  application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for spot heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.  Advantages at a Glance • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell• no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (matching stand feet are available from us as accessories)• Immediately usable - no additional installations or expensive renovations required You can find the ErP table for this heating device above in the "Documents" section.      Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of the room in m² x W/m² = required heating power in Watts.  Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   heating capacity 580W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 Voltage 220 - 240 V/50 Hz rated current consumption max. 2.6 A Power consumption max. 0.58 kW housing Aluminum Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without stand feet) Weight 5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.012 guarantee 2 years

Learn more More Fewer

Modern insulation layer dryers are indeed optimally soundproofed, but due to their function, they produce turbine-like noises that are often perceived as disturbing by residents. This silencer can be easily integrated into the drying system and significantly reduces operational noise. "Extensive practical tests have shown significant sound reductions when using insulation layer drying units from leading manufacturers. This universally applicable module is particularly suitable for use with Trotec insulation layer drying units and offers even more sound reduction without back pressure."  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  Advantages at a Glance • Sound reduction between 14 and 19 dB(A) possible• No loss of performance and no back pressure• Compatible with many common insulation layer drying units• Universally applicable for 38 mm and 50 mm hoses• For compressor operation in underpressure and overpressure processes• Specifically designed for flexible and stable stack installation "in one piece" with MultiQube system components.• 100% recyclebar  Technical data  sound reduction 14 - 19 dB(A) air hose connections  2 nozzles of 38 mm each (optional rubber adapter available in 50 mm) Masse (L x B x H) 378 x 378 x 132 mm Weight 3.4 kg Trotec article no. 6.100.000.120 guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether at the workplace, in the living area, or in the bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides warmth directly where it is needed by the residents as a supplementary heating solution. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 700W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.72 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.2 A Power consumption max. 0.70 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without stand feet) Weight 6 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.014 Guarantee 2 years

Learn more More Fewer

High-quality, large basket fan made of robust metal and aluminum rotors. The fan head is adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a durable high-performance motor, and a rack with 2 wheels for easy mobility. It impresses with its good price-performance ratio and its simple handling.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Extra large fan head (Ø 60cm = 24") with up to 10500 m³/h recirculation• Three fan speed settings, easily adjustable via a rotary switch on the back• The fan's direction of airflow is horizontally adjustable without steps.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easily transportable with rack and 2 wheels• Long power cable, approx. 2.20m length, Swiss plug• RoHS and CE compliant  Technical data  Power consumption 120 Watts max. Rotordurchmesser 60 cm / 24 inches airflow Up to 10500m³/h speed levels Three Cable length approx. 2.20m Connection Swiss plug 230V 3-pole (standard household socket) Dimensions ( W x H x D )  80 x 71 x 38.5 cm operating noise 64 dB(A) at a distance of 2.5m Weight 6.5kg  

Learn more More Fewer

This infrared heating panel / heating wall generates a very energy-saving heating thanks to the latest technology. It can be used freestanding or mounted on a wall or ceiling. Infrared heating panels produce a pleasant thermal wave energy (deep heat), which is predominantly absorbed by the walls and objects in the room. Only a fraction (about 15%) of it is not absorbed and is reflected back. The thermal wave energy absorbed by ceilings, walls, floors, and objects is then released back to the environment in the form of heating energy, creating a pleasant warm climate with extremely low electricity consumption compared to conventional heating methods.This infrared heater is available in two different strengths: with 350W or 900W heating power (please note the corresponding offer in our shop). Unlike conventional heaters or fan heaters, infrared heaters can provide heat to specific areas without having to warm the rest of the room. For example, for heating a workspace, the seating area in the living room, etc. The heat becomes noticeable after just a few minutes. This infrared heating panel is also ideal for drying damp or wet walls, ceilings, or objects, as the heat exerts its effect about 85% directly in the wall, ceiling, or object, without prior convection loss, and thus the moisture is expelled much faster than by other methods.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have established an excellent reputation for high-quality devices in recent years. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc. We are the general representative for WDH devices in Switzerland and usually keep the products in stock.With us, you receive a branded product and, of course, comprehensive customer support, even after the warranty period has expired.Properties & Advantages:? High-performance IR heating plate with at least 350 watts? High-quality stainless steel heating plate with aluminum frame? Two aluminum feet (for freestanding) as well as a mounting set (for wall mounting) are included in the delivery.? Heat transfer without air movement and without any oxygen consumption? Absolutely silent operation? Very low consumption costs compared to other heating forms? Automatic Overheat Protection? Service promise/Pick-up guarantee: In the unlikely event of a complaint, the device will be picked up from you by UPS and checked/repaired in our own workshop.? No maintenance required and easy to clean (just wipe it down).? Very slim design and lightweight construction. Furthermore, very appealing exterior.? High mobility (Plug & Play) and super easy quick assembly.Miscellaneous:- This infrared heating plate is passively controlled. This means, simply plug it into the socket and the heating plate operates independently. This means, the heater is either on or off. Temperature or time control is not possible or would need to be supplemented with a separate timer or temperature controller if necessary.The heating plate of the device can become as hot as 125° C in extreme cases; however, the automatically controlled heating plate temperature averages between 80 – 105 °C. It is advisable to ensure that small children or animals cannot come into contact with the heating plate.Examples of use:Room heating: Ideal for supportive and energy-saving room heating. For rooms up to 8 m2, it is often sufficient as the only heat source.Drying: Ideal for faster drying of walls, ceilings, floors, and objects. Economic heating/drying of basement rooms.Damage removal: After flooding or after damage caused by extinguishing water. These devices are ideally suited to support the drying process.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart)(akd) Technical dataVoltage: 230V / 50HzPower consumption: max. 475WWavelength: 8 – 15 µm = medium infrared, IR-C wavesDimensions without feet (H/W/D): 60 x 60 x 3 cmWeight: 3.8 KgOperational Shutdown: Passive Control(i.e. Plugged in is ON, unplugged is OFF)Application area: up to max. 8m²Swiss plug: YesWarranty: 2 years

Learn more More Fewer

The turbo fan Master CD5000 is a solidly built blower with a compressed air stream. It is suitable for drying wet floors, carpets, accelerating construction drying, and generally for ventilating rooms. Thanks to its powerful radial motor, it is also capable of transporting air well into the distance.PositionsThe blower can be set up in 3 different positions.horizontal - blow out straight forwardinclined - blowout angled upwardstipped - blow out upwards Characteristics • Robust housing made of impact-resistant plastic.• The fan wheel of the radial fan is made of wear-resistant aluminum, the motor has the fan stages.• Connection cable and plug with Swiss fixed adapter (fits standard household sockets 230V).• Socket for connecting another device to the housing. Connection for air hoses:"With an optional attachment, the air can be subdivided into three hoses (diameter 10cm). The individual air outlets can either be left open or closed individually with suitable caps."   Technical data  Tension 230V / 50Hz recording (3 levels) 384 / 452 / 550W fan speeds 3 air pressure 500 Pa air volume max. 2640 m³/h sound pressure in 1m after sound pressure at 2.5m after Masse H x B x T 50 x 43 x 52 cm Weight 14.2 kg Attitude rotary switch CH plug Yes + 2.6m cable (cross-section 2.5mm²) guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 1100W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 1.09 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 4.8 A Power consumption max. 1.1 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without stand feet) Weight 9 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.018 Guarantee 2 years

Learn more More Fewer

The AB-10 is a powerful, versatile fan made of robust plastic. The radial flywheel pushes the laterally drawn air forward with a lot of pressure. An optional hose distribution attachment can be mounted on the air outlet side.ApplicationsThe fans are versatile and can be used in various ways, for example:• for commercial use on construction sites to accelerate the drying of construction materials• for drying water damage• for the removal of vapors• as carpet dryer3 different positionsThe fans can be positioned in three positions:horizontal - Air discharge straight forward: this position directs the air horizontally over the floor and drives moisture from carpets or also from underlays into the room air. This massively accelerates the drying of the substrate.45° inclined - Blowing out at an angle upwards: For example, when damp walls or suspended objects need to be dried.90° tilted - Blowing upwards: for drying ceilings or for more even air distribution in rooms, without stirring up dust.Characteristics• Maximum air volume of strong 4500 m³/h• Three fan speeds (1 = 520W, 2 = 550W, 3 = 620W)• Impact-resistant housing made of durable "Linear Rotational Plastic" (rotational plastic)• Powerful high-performance single-phase motor with starting and running capacitor (PSC motor)• Operation and airflow possible in three different positions (air angle positions 0°, 45°, 90°)• Easy to carry and transport thanks to compact design and convenient carrying handle• The device is immediately ready for use (no installation or assembly required)• No interruptions during power failure (device continues from where it was interrupted)• Stackable (multiple identical devices can be stacked on top of each other for operation and storage)   continuous operationThis blower is designed for high air circulation, even over extended periods. However, to avoid excessive wear, it should be turned off for 1-2 hours after 48 hours of continuous operation, allowing the motor to cool down completely.   Technical data Tension 230V ~ 50Hz Max. Power Consumption 880 W (3.9 A) Max. air circulation 4500 m3/h fan speeds 3 ( 3 = 620 W, 2 = 550 W, 1 = 520 W ) Max. speed 1300 U/min. Masse (H x B x T)  51 x 43 x 48 cm Weight 12.6 kg cessation of operations rotary switch Swiss plug Yes, 3m Cable guarantee 2 years

Learn more More Fewer

In vacuum insulation layer drying, the use of a class H13 particulate filter is highly recommended to protect against mineral fiber dust, mold spores, and allergens in the air. This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It has been specifically designed for use with Trotec water separators and compressors and is characterized by optimal filter performance as well as a high separation efficiency. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominal > 99.97 % at 0.3 micrometer particle size. With 3 m² of filter area and 315 m³/h nominal air flow rate, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and provide performance reserves for combined use with up to two VE4S MultiQube or one VX5.  Optional filter class H14 "For an even higher purity rate, a filter of class H14 is optionally available (Item No. 7.160.000.223) with a separation efficiency of > 99.995 % at 0.2 micrometer particle size."  Hepacontrol Contaminated filters not only pose a contamination risk to the surrounding air, but they also have longer drying times and a risk of overheating.the compressor turbine as a result. Here, it offers even more safety compared to passive systems thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a used filter element, the warning light automatically turns on, clearly signaling the need for a replacement of the filter element. Hepacontrol does not require an additional power connection, as the supply of the bright warning LED is provided by an integrated and particularly long-lasting high-performance battery.  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  scope of delivery complete with housing and a filter element  Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h Number of hose fittings 4 x 38 mm (Rubber adapter available in 50 mm optional) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6.100.000.043 guarantee 2 years

Learn more More Fewer

This separator belongs to the family of the Trotec drying system "Multiqube". It can be integrated into this system, but can also be freely combined with any existing devices from other manufacturers via hose connections. Compared to other brands, the price-performance ratio of this model is excellent.     microfilter system   "It features an integrated microfilter system with a maintenance-friendly magnetic closure filter compartment. This makes it a flexibly deployable integral solution with all pre-HEPA filter stages in just one device."   Advantage: improved flow-optimized filter technology, faster assembly, less material - and space requirement - no separate additional microfilter housings necessary.     Use in combination with a compressor   The connected compressor's automatic shut-off and restart system provides optimal overflow protection that does not require monitoring. With the drying of the insulation layer, the processing of areas up to 40 m² is easily possible.     Extended application possibilities   The "TTKwic" quick couplings attached to the device allow for the connection of up to two dehumidifiers with a condensate pump, which pump the extracted water into the separator. This results in a central water discharge (hose connection Ø 12mm).     Advantages at a Glance   • Approx. 25% performance-enhanced filter technology thanks to filter compartment with microfilter cassette• Stainless steel element for water separation and fine filtration• Residual water drainage function• Active overflow protection through automatic switching on and off of the connected insulation layer dryer• Integrated connection cable• Cable collector• Extremely lightweight, robust, and particularly maintenance-friendly construction• Transport wheels with locking brakes• Maintenance quick-release fasteners• Emergency stop switch• Overflow sensor with automatic shut-off• Space-saving stackable• Lightweight material base: impact-resistant and robust construction, 100% recyclable • Two integrated TTKwic quick couplings for central water drainage for up to two connected dehumidifiers• Easy handling - easy to clean   scope of delivery   MultiQube, a microfilter cassette     Technical data  Volume 17 Liter power connection 230 V / 50 Hz Plug EU plug with Swiss fixed adapter Power consumption 320 W Number of air connections 3 suitable hose diameter 38 mm fine filter 3 pieces class F8 Weight 11.3 kg Masse (B x H x T) 440 x 395 x 420 mm Trotec article no. 6.100.000.006 guarantee 2 years

Learn more More Fewer

The AD20 is a robustly built condensation dryer. It is lightweight, portable, and can be carried like a suitcase. Thanks to the BlueDry technology, the AD20 reliably dehumidifies even at low humidity and temperature. Another advantage is the built-in automatic condensate pump with overflow protection (pumping height up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Robust housing made of impact-resistant plastic. It is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used to connect additional devices.Features and Benefits• Housing: made of robust, impact-resistant, and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Automatic water pump with overflow protection integrated as standard.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other.  Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 18.0 liters / 24h (Power consumption: 350 W)27°C / 60% r.H. = 11.0 liters / 24h (Power consumption: 310 W)20°C / 60% r.H. = 9.0 liters / 24h (Power consumption: 260 W)10°C / 70% r.H. = 5.0 Liters / 24h (Power consumption: 215 W)(r.H.=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption:  max. 350W Sound pressure level:  1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification capacity: max. 18.0 liters / day (30°C / 80% r.H) bucket / pump No bucket. Integrated pump with overflow protection, 4 m delivery height. Recirculation air volume level 1/2 200 / 270 m³/h refrigerant:   R1234yf Dimensions (H/W/D):      420 / 320 / 500 mm Weight:    16.4 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug:  Yes   Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The Fral F96 dehumidifier is a robust dryer for construction, trade, and industry. It has a very powerful performance and is also suitable as a large area dehumidifier for rooms up to 200m² (or 500m³) starting from 1°C! Relatively quiet operation. New: factory-prepared direct connection for optional condensate pump.   Due to well-developed hot gas defrosting, the F96 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where the F96 still extracts water from the air thanks to tube evaporators, in which other dryers have long ceased to produce a drop (according to our tests, clearly below the threshold of 30% relative humidity).serviceThe settings are made via the clear, easy-to-use display. By pressing a button, the desired target humidity can be selected in the range of 30%-80% r.H. in 1% increments, and continuous operation is also possible. The entered values are automatically saved, so that the dryer resumes operation with unchanged settings as soon as the power returns in the event of a power outage.During operation, the display shows the currently measured humidity in the room. When the desired target humidity is reached, the drying operation pauses (the ventilation also turns off).The operating hours can be queried at the push of a button.airwayThe humid room air is drawn in at the back of the device and cleaned through an industrial, easy-to-clean air filter. The dry air is blown out towards the front into the room.Condensate bucket and pump connectionThe condensate is collected in the removable 14-liter bucket, with a magnetic float automatically interrupting operation when full. Alternatively, there are two options for draining the condensate via a direct hose connection: either the hose is connected directly to the water bucket without any additional accessories, or it can be screwed onto a coupling at the bottom of the drip tray. Additionally, a magnetically adhering condensate pump can be used (optional accessory, not included in the basic delivery). The power supply for this pump is provided via a factory-prepared socket directly on the dehumidifier, ensuring that it automatically switches off if the pump malfunctions.The F96 is mounted on 2 stable wheels and features a metal handle for easier mobility. Due to its size and the massive metal casing, it may need to be carried by two people up stairs.It is suitable• as a construction dryer• Large area dehumidifiers for commercial and industrial use• for dehumidification of basements up to 200m² and in case of water damage• for unattended continuous operation• for operation on a timer  Performance and ConsumptionThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +32°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C/80% r.H.: 80 liters (60%: 54 liters) 20°C/80% r.H.: 45 liters (60%: 30 liters)15°C/80% r.H.: 31 liters (60%: 21 liters)10°C/80% r.H.: 26 liters (60%: 19 liters)5°C/80% r.H.: 19 liters (60%: 7 liters)(r.H.=relative humidity)    Technical data  Tension 230V / 50Hz Power consumption max. 1200W / 920W (at 20°C/60% r.H.) Sound pressure level 1 m distance 55 dB (A) (our measurement) 2.5 m distance 53 dB(A) (manufacturer's specification) dehumidification performance 80 liters/day (30°C / 80% r.H.)  amount of recirculated air 1000m³/h condensate tank approx. 14 liters Compressor Rotary compressor  refrigerant R1234YF (GWP: 3) Dimensions (H x W x D) approx. 1070 x 660 x 700 mm (including rack and wheels) Weight 57 Kg cessation of operations Digital Operator Panel Ambient temperature 1°C ~ 32°C Area of application up to 200m² Swiss plug Yes   Direct pump connection Yes hose connection Yes operating hour meter Yes guarantee 2 years

Learn more More Fewer

The AD40 is versatile and so lightweight that it can be carried like a suitcase. Thanks to the BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperature.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Water bucket or optional pumpThe water collection container (6.8 liters) is easy to remove, carry, and empty. It is located inside, with the water level of the bucket measured by a float. When full, it automatically interrupts operation, and operation automatically restarts when the bucket is replaced. An optional matching pump kit is available, which is versatile and suitable for unattended continuous operation.Robust housingThe housing is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used for connecting additional devices. Four robust, stable plastic feet for floor placement. Stackable with other Aerial Aercube devices.Characteristics  • Case: made of robust, impact-resistant, and UV-resistant plastic, lightweight. Fixed points for AERCUBE® lashing system. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Optional pump kit available.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other. Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H = 35.0 Liters / 24h (Power consumption: 520W) 27°C / 60% r.H. = 22.0 Liters / 24h (Power consumption: 430W) 20°C / 60% r.H. = 15.0Liters / 24h (Power consumption: 370W) 10°C / 70% r.H. = 8.0 Liters / 24h (Power consumption: 300W)(r.H.=relative humidity)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 530W Sound pressure level:  1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification capacity: max. 35.0 liters / day (30°C / 80% r.H) Bucket: Capacity 6.8 liters, Operational interruption due to swimmer Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant:   R407C Dimensions (H/W/D):      580 / 390 / 450 mm Weight:    25 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug:  Yes   hose connection:  Connection fitting for direct hose connection Optional Pump Kit Operating hour meter: Yes Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

The three-stage adjustable turbo engine reaches up to 20000 rpm and guarantees maximum efficiency at every power level, as the current volumetric flow rate in m³ is continuously monitored thanks to the integrated automation, and the power is automatically adjusted to the optimal air throughput.   A single press of a button is enough, and the device switches either to a higher power class or, if needed, to the additionally available whisper mode:     Performance levels   Performance level 1: suitable for areas up to approx. 30 m² at overpressure / 25 m² at underpressure, motor power: 0.5 kWPerformance level 2: suitable for areas up to approx. 60 m² at overpressure / 50 m² at underpressure, motor power: 0.8 kW Performance level 3: suitable for areas up to approx. 90 m² at overpressure / 70 m² at underpressure, motor power: 1.2 kW   Comparison with predecessor models based on side channel blower technology: Performance level 1: Corresponds to the performance of a 0.8 kW side channel blowerPerformance level 2: approximately 10% stronger than a side channel blower with 1.1 to 1.3 kW powerPerformance level 3: Corresponds to 140% of the performance of a 1.1 kW to 1.3 kW side channel blower and 80% of the performance of a 3 kW side channel blower. The wear-free touch control panel of this new insulation layer dryer allows for convenient operation at the touch of a finger. No controls, no wear.   With the help of the new whisper mode, the sound level of the unit can be reduced for 10 hours, yet the device operates as efficiently as usual. "Furthermore, it has an interface for data exchange with the latest generation of our drying unit DA 4 M. The connection of both units enables networking of all device data, including real-time remote monitoring of system status and drying progress." The multifunction display not only clearly shows the current operating status and volumetric flow rate - even in the dark or from a distance - as a plain text display, but additionally, the color of the display lighting automatically indicates how effectively the drying air can flow through the insulation layer in your installation.     Performance-optimized energy consumption through HiDry automation   In contrast to conventional compressor turbines, the VX turbo engines have power and energy consumption always in a direct linear relationship. When the power is reduced, the energy consumption is also reduced. Furthermore, the power control is not resistance-oriented, but is focused on the required volumetric flow rate. Thanks to this technology, VX units operate at a particularly energy-saving eco rate compared to turbine compressors, especially in the drying final phase.     Advantages at a Glance   • Unique adaptive power control - makes thinking in device classes practically unnecessary• Replaces all side channel blowers in the power classes from 0.8 kW to 3 kW• Super lightweight - only 10 kg• 35 % lighter than comparable competitive models• Up to 75% lighter than side channel blowers of the same performance class• DA-4 interface for networking all device data including real-time remote monitoring of system status and drying progress• Optiflow-NT multifunction display with clear text status display and performance control color lighting• Digital counter for operating hours and energy consumption• Whisper mode for very quiet night operation• Wear-free touch control panel • HotStop System• Service socket for dehumidifier (EU socket!)• Cable receiver with lockable plug• Clear text status display• Protection-enhanced control elements• Maintenance quick-release fasteners       scope of delivery   device with • 2x connection fittings for 38 mm hoses • Filter sieve for drying in overpressure process • 2x VX-Microfilter element fine dust filter class F8     Important   • The four-way splitter visible in the product image is not included in the scope of delivery • The blue socket on the device corresponds to a EU socket. Only 2-pole plugs fit Swiss devices.      Technical data   Recommended room size overpressure 90 m² negative pressure 70 m² max. overpressure 270 mbar max. negative pressure 220 mbar Air volume blowing free 250 m³/h Defined volumetric flow rate-  optimum (aspirating)       Stage Whisper Mode: 100 m³/h Level 1: 100 m³/h Level 2: 150 m³/h Level 3: 180 m³/h Level 4: 250 m³/h power connection 230 V / 50 Hz rated current consumption max. 5.5 A Power consumption max. 1200W Cable length approx. 3.5 m Plug EU plug with Swiss adapter Dimensions W x H x D 430 x 415 x 420 mm Weight 10 kg Trotec article no. 1.560.000.042 guarantee 2 years

Learn more More Fewer

A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs.   The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.)  Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H / W / D):      690 x 390 x 470 mm Weight:    32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer