From the "Topten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms up to 15m.² and approx. 40m of clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively narrow metal housing integrates optimally into the room's appearance. For installation, the support rail is fixed to the wall with two screws, and the dryer can then be easily hung. Rubber buffers prevent the transmission of (very low) vibrations to the wall. The condensate is directed via a hose either directly into a drain or into a bucket placed under the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out from the front for cleaning.  Drying programs:On the side of the housing is the control. A toggle switch is used to select whether you want the "Drying" mode or "Room Monitoring". A rotary switch can be used to easily adjust the desired residual moisture.Clothes drying: The drying program can be started at the push of a button. The dehumidifier runs until the laundry is dry and then automatically switches off. Room Monitoring: The general room monitoring serves to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the value set on the dial, with an ideal value for this mode being around 55-60%. Unlike the laundry drying programs, the dryer never completely turns off in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also reactivate.  You can only get the Dryfix Swiss from us! It is exclusively manufactured for our company in a specialized factory in Switzerland.Ambient temperatureTechnically, the "Swiss" tumble dryers can be used down to 5°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wall  The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 1m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose if possible. If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data drying room: up to 15m² Drying performance: 1.73 Kg/h Consumption per kg of laundry: 0.307 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 530W Sound pressure level (our measurement): 1.0 m distance 60 dB(A) 2.5 m distance 57 dB(A) Dehumidification capacity: 26 liters/day (30°C / 80% r.H.) air circulation volume: 600m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410A Dimensions (H/W/D): 55 x 57 x 26 cm (Depth: from wall to front) Weight: 35 Kg    Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Special features: Made in Switzerland

Learn more More Fewer

The new WT230D is a successful evolution of its predecessor model WT230U. It is slightly more powerful in dehumidification performance and is clearly among the best in terms of efficiency with significantly lower consumption. An ideal device for single-family homes in combination with a tumbler.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 7m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted.Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the lower part are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 18 m² Drying performance: 1.63 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 660W or 420W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 59 dB(A) 2.5 m distance 67 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 35.5 liters / 24h (power consumption: 569 W) at 27°C / 60% r.H. = 21.1 liters / 24h (power consumption: 487 W) at 20°C / 60% r.H. = 14.6 liters / 24h (power consumption: 420 W) at 10°C / 70% r.H. = 6.1 liters / 24h (power consumption: 368 W) air circulation volume: 750 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

"Those who like their laundry to dry faster will find the WT 240D to be a good and powerful device. The WT240 is the most economical of the new WT series from Aerial. A reliable helper for frequent use in the laundry room."serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 8m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as a 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 20 m² Drying performance: 1.93 Kg/h Consumption per kg of laundry:   0.26 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 620W or 440W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 62 dB(A) 2.5 m distance 68 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 36.5 L/24h (Power consumption: 570 W) at 27°C / 60% r.H. = 21.6 L/24h (Power consumption: 500 W) at 20°C / 60% r.H. = 16.8 L/24h (power consumption: 440 W) at 10°C / 70% r.H. = 7.2 L/24h (power consumption 390 W) air circulation volume: 830 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The WT 250D is suitable not only for intensive drying tasks in single-family operations but also meets performance expectations in drying rooms shared by multiple parties. With a drying capacity of approximately 3 kg of laundry per hour, this model dries in about 2.5 hours, which is what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 9m away.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.  mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 35 m² Drying performance: 2.95 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 950W or 677W (at 20°C/60% r.H.) Sound pressure level: 2.5 m distance 61 dB(A) 2.5 m distance 68 dB(A) fan level 2 (our measurement) Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 57.1 Ll/24h (Power consumption: 570 W) at 27°C / 60% r.H. = 24.1 L/24h (Power consumption: 500 W) at 20°C / 60% r.H. = 23.0 L/24h (Power consumption: 440 W) at 10°C / 70% r.H. = 13.4 L/24h (Power consumption: 390 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 42 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The heavy-duty worker among the new Aerial WT dryers! It is specially designed for intensive use and dries laundry quickly and reliably with easy operation. With a drying capacity of approximately 3.6 kg of laundry per hour, this model dries in about 2 hours what a washing machine can wash.serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.Drying programs:Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.In both programs, both the current humidity and the target humidity are displayed. Blower and fan stages:The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.Selectable fan levels: The WT280 has one (powerful) fan level. This provides quick drying results, even with a lot of laundry and long drying rooms of up to about 10m.Adjustable air louvers:Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines. Direct hose connection:The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.Air filter:The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care. Memory function:The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted. Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. Made in Europe:The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing." Service-friendly device construction:With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.    mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable trolleys in our range to which the dryer can be mounted. "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."Calculate distanceImportant:• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.  Technical data drying room: up to 40 m² Drying performance: 3.68 Kg/h Consumption per kg of laundry:   0.29 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 1350W or 950W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 2.5 m distance 67 dB(A)   Examples of dehumidification performance and consumption: at 30°C / 80% r.H = 79.2 L/24h (Power consumption: 1390 W) at 27°C / 60% r.H. = 46.6 L/24h (Power consumption: 1080 W) at 20°C / 60% r.H. = 32.2 L/24h (power consumption: 990 W) at 10°C / 70% r.H. = 20.3 L/24h (Power consumption: 800 W) air circulation volume: 950 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 80.9 x 64.0 x 34.5 cm Weight: 43 Kg Business closure: Digital Ambient temperature: 8°C ~ 32°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The dryer is suitable for single-family homes with lower drying needs, especially for rooms that can get a bit cooler in winter. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.   execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating: This model is equipped with a 1350W heater. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage. In this case, please consider the standard version "Secomat75".Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If wall mounting is not possible, we recommend the appropriate Secomat chassis."  Technical data  Krüger article: 386.04 drying room: up to 15 m² Drying performance: 1.36 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 370W or 345W (at 20°C/60% r.H.) Heating switched on = +1350W Sound pressure level: 64 dB(A) (Manufacturer's specification with 7.5kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 9.0 liters / 24h (power consumption: 345 W)   air circulation volume: 930 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R134a / 550g Dimensions (H/W/D): 620 x 545 x 330 mm Weight: 39 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

This model is suitable for single-family homes with larger amounts of laundry and in drying rooms that can become cooler in winter. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer functionAdditionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.   executionCompact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating: The Secomat150H is equipped with a 1350W heater. This automatically switches on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage. In this case, please refer to the standard version "Secomat150".Technically, the Secomat dryers can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of deliveryThe delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly"Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  drying room: up to 25 m² Drying performance: 3.17 Kg/h Consumption per kg of laundry:   0.30 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secomat 150H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification with 15kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1300 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

One of the strong Krüger Secomat models. It is suitable for single-family homes with a lower drying requirement for rooms that are unheated. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device: drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating Option: This model is also available with a 1350W heater for an additional charge. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage.Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  Krüger article: 389.01 drying room: up to 25 m² Drying performance: 3.08 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secoamt 200H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification for 20kg laundry in the room) Examples of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1400 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

The Lübra SecoTec 1410 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1350m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Modern design, including END-OFF mode. High water extraction even in the cooler season.Execution:- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data Country of production Switzerland energy efficiency class A1 Power consumption 800 Watt supply voltage 230 V Dry performance at 15kg 2.52 kg/h consumption 0.32 kWh / kg laundry noise level (our measurement) 63 dB(A) at a distance of 2.5m 66 dB(A) at 1m distance air circulation 1350m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 42 kg Refrigerant (CFC-free) R410a guarantee 3 years

Learn more More Fewer

The new Secotec 1400 dryer from Lübra impresses with its sleek design, economical operation, and solid craftsmanship made in Switzerland.Similar to the more affordable Dryfix Swiss, the Secotec 1400 features a more powerful blower, which is particularly advantageous for even drying on long drying lines over 4m in length. The drying capacity is 1.70 kg per hour, which corresponds to approximately 3-4 loads of laundry per day in slightly temperate rooms. Therefore, the Secotec 1400 is ideal for use in single-family homes or as a supplement to a tumbler in multi-family houses.The humid room air is drawn in from the right side, while the dry air is blown into the room from the front in the upper area of the housing. For drying laundry, the Secotec1400 is ideally hung if the top edge is mounted no higher than 1.70m and can blow along the lines.The housing is made of high-quality, powder-coated metal (white RAL 9003). On the right side, a dust filter is inserted, which cleans the drawn-in room air of dirt. This filter consists of a plastic frame and a high-density nylon mesh. It can be easily removed from the front for cleaning. Immediately behind the filter is the water drainage channel for the condensate, which is thus accessible for cleaning without tools.Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted. • Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed.Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 1m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (suitable hose: 16mm inner diameter). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data   drying room: up to 18m2 Drying performance: 1.7 Kg/h Consumption per kg of laundry: 0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 460W Sound pressure level (our measurement): 1.0 m distance 66 dB(A) 2.5 m distance 63 dB(A) Dehumidification capacity: 35 liters/day (30°C / 80% r.H.) air circulation volume: 850m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410C Dimensions (H/W/D): 550 x 570 x 260 mm (Depth: from wall to front) Weight: 35 Kg    Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes, connection cable 3m hose connection: Yes Guarantee: 3 years

Learn more More Fewer

The Bora 208 from Roth-Kippe is an affordable, well-thought-out dryer for families with children and for households that do not want to dry all their laundry in the tumbler. It dries about 2-3 loads of laundry per day and is available as "Bora208" (without switchable heating) or "Bora208H" (with switchable heating). In the version with heating, the room can be heated to 18°C at the push of a button in cooler environments. In rooms that maintain 18°C or more year-round, the version with heating offers no advantage.service The Bora features a clear, digital control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically on the Bora: By repeatedly pressing the program button, the start time can be postponed in half-hour increments. This means that you can hang up the laundry during the day, but shift the drying time to the period of the lower electricity tariff.Switchable heating:For a small additional fee, the device is also available as "Bora 208 H". The switchable 1000W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5m in length, which can certainly have a width of 2m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70m from the top edge of the device.Selectable fan levels: The Boras have a fan level, so on or off.Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry runs off through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever be exhausted, suitable replacement filter mats can be ordered from us at any time.Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.  Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland. With this, the dryer can be started with a delay if desired, allowing the low-tariff electricity to be fully utilized. This applies both to laundry drying and to the general stabilization of excessive basement humidity. Furthermore, daily blocking times or an automatic, time-limited room drying program - for example, restricted to nighttime hours - can be programmed (limited to a maximum of 99 days each). The device counts the operating hours and reminds you with a light after 300 hours that the filter should be cleaned. By pressing the reset button for 5 seconds, the counter is reset and starts anew."Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting The assembly is very simple, just like with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:- the plug-and-play device- Carrier rail with screws/anchors- Hose connection coupling- 2m condensate drain hose- User manual "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no drainage is available, we recommend the chassis 'Dryfix-Mobil' with integrated bucket or the suitable chassis from Roth-Kippe."  Technical data  drying room: up to 15 m² Drying performance: 1.49 Kg/h Consumption per kg of laundry:   0.31 kWh Energy efficiency: A1 Tension: 230V / 50Hz Examples of dehumidification performance and consumption: Power consumption max. 515W, with heating switched on: +1000W = total 1515W (only 208H) at 20°C / 80% r.H. 22.9 L/24h (Power consumption: 450 W) at 26°C / 80% r.H. 27.5 L/24h (Power consumption: 495 W) Sound pressure level: 1 m distance 70 dB(A) 2.5 m distance 67 dB(A) (our measurement) air circulation volume: 770 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407C Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 40 Kg Business closure: Digital Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes hose connection: Yes Guarantee: 3 years                                               Training video for assembly:    Training video on changing the moisture value:  Training video for changing the display language:  Training video for setting the time:

Learn more More Fewer

The Lübra SecoTec 1700 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1450m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. execution- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).  mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data Country of production Switzerland energy efficiency class A1 Power consumption 870 Watt supply voltage 230 V Dry performance at 15kg 2.93 kg/h consumption 0.30 kWh / kg laundry noise level (our measurement) 65 dB(A) at a distance of 2.5m 68 dB(A) at 1m distance air circulation 1450m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 44 kg Refrigerant (CFC-free) R410a guarantee 3 years  

Learn more More Fewer

The 408 is the ideal solution for households looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of two to three loads of laundry per day, making it perfectly suited to the needs of smaller households. Please note that the model offered here does not have a switchable heating function. As the successor to the proven "Bora 208", the 408 continues to impress with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 408 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 408 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 15 - 18 m² Drying performance: 1.45 - 1.89 kg/h depending on fan speed Consumption per kg of laundry:   0.25 - 0.31 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.41 kW with heating switched on ("H" models): 1.41 kW Sound pressure level: Fan level 1: 45 dB(A) Fan level 3: 66 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 38 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 408H is the ideal solution for households looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of two to three loads of laundry per day, making it perfectly suited to the needs of smaller households. Unlike the model 408, the 408H features an optional heating function that further accelerates the drying process when needed. As the successor to the proven "Bora 208H", the 408H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 408H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 15 - 18 m² Drying performance: 1.45 - 1.89 kg/h depending on fan speed Consumption per kg of laundry:   0.25 - 0.31 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.41 kW with heating switched on ("H" models): 1.41 kW Sound pressure level: Fan level 1: 45 dB(A) Fan level 3: 66 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 38 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 410 is the ideal solution for family households with children looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of three to four loads of laundry per day, making it perfectly suited to the needs of larger families. Please note that the model offered here does not have a switchable heating function. As the successor to the proven "Bora 210", the 410 impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 410 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 410 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with a heater only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 25 m² Drying performance: 1.75 - 2.50 kg/h depending on fan speed Consumption per kg of laundry:   0.22 - 0.28 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.43 kW with heating switched on ("H" models): 1.43 kW Sound pressure level: Fan level 1: 46 dB(A) Fan level 3: 67 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 40 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 410H is the ideal solution for family households with children looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of three to four loads of laundry per day, making it perfectly suited to the needs of larger families. The model offered here features an optional heating function that further accelerates the drying process when needed. As the successor to the proven "Bora 210H", the 410H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. In addition, the 410H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. Especially in drying rooms with only a small amount of laundry or with garments of varying thickness, this follow-up check can optimize the drying result. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It spreads relatively wide, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released to the room air more quickly and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 25 m² Drying performance: 1.75 - 2.50 kg/h depending on fan speed Consumption per kg of laundry:   0.22 - 0.28 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.43 kW with heating switched on ("H" models): 1.43 kW Sound pressure level: Fan level 1: 46 dB(A) Fan level 3: 67 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 40 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 415 is a reliable and efficient tumble dryer specifically designed for multi-family homes with up to six units. With a drying time of just four hours for two washing machine loads, depending on the selected fan speed, it effortlessly meets the demands of high-traffic drying rooms. Please note that this model does not have an adjustable heating function. With an energy consumption of only 0.18 kWh per kilogram of laundry, the 415 is the most energy-efficient model in the new Bora series. As the successor to the proven "Bora 315", the 415 impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 415 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 415 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C in the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 30 m² Drying performance: 2.74 - 4.06 kg/h depending on fan speed Consumption per kg of laundry:   0.18 - 0.24 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.69 kW with heating switched on ("H" models): 1.69 kW Sound pressure level: Fan level 1: 53 dB(A) Fan level 3: 68 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 62 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 415H is a powerful and reliable dryer specifically designed for multi-family homes with up to six units. With a drying time of just four hours for two loads of laundry, depending on the selected fan speed, it effortlessly meets the demands of high-traffic drying rooms. The model offered here features an adjustable heating function that further accelerates the drying process if needed. With an energy consumption of only 0.18 kWh per kilogram of laundry, the 415H is the most energy-efficient model in the new Bora series. As the successor to the proven "Bora 315H", the 415H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 415H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. Especially in drying rooms with only a small amount of laundry or with garments of varying thickness, this follow-up check can optimize the drying result. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 30 m² Drying performance: 2.74 - 4.06 kg/h depending on fan speed Consumption per kg of laundry:   0.18 - 0.24 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.69 kW with heating switched on ("H" models): 1.69 kW Sound pressure level: Fan level 1: 53 dB(A) Fan level 3: 68 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 62 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 420 is the most powerful dryer in the Bora series and has been specifically designed for intensive use in multi-family homes. With a drying time of just over three hours for two washing machine loads, depending on the selected fan speed, it is ideal for high-traffic drying rooms. Please note that this model does not have an adjustable heating function. As the successor to the proven "Bora 320", the 420 impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 420 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.  Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. Especially in drying rooms with only a small amount of laundry or with garments of varying thickness, this follow-up check can optimize the drying result. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 420 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with a heater only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It spreads relatively wide, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 35 m² Drying performance: 3.00 - 4.74 kg/h depending on fan speed Consumption per kg of laundry:   0.21 - 0.27 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.75 kW with heating switched on ("H" models): 1.75 kW Sound pressure level: Fan level 1: 54 dB(A) Fan level 3: 69 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 64 kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer