Compact air conditioner of energy class A for cooling bedrooms, offices, and smaller living rooms up to approx. 18m². It features easy operation on the device itself or via remote control.The blower pushes the cold air into the room at a comfortable height, and the airflow can be directed using vertically adjustable louvers. The warm exhaust air is expelled from the room using the supplied hose, e.g., out of the window or through the balcony door. As with all mobile air conditioning units, the ventilation and motor are also clearly audible with this device, although the overall noise level has been noticeably reduced compared to earlier mobile air conditioners in this performance class.   Execution / Scope of delivery• Plastic housing white• Operator panel with display of the desired temperature and the current room temperature• 4 The Role• Remote control• Extendable exhaust hose approx. 1.50m (with reduction attachment for tilt windows)• Cable approx. 1.50 m with Swiss plug (standard socket 230V / three-pole)• Operating instructions German + French "After reaching the target temperature, the device stops cooling and automatically turns back on when the room air warms up again. The ventilation runs continuously, as with most air conditioning units. The selectable temperature range is between 18 and 32°C."The timer can limit the operating time to 1 - 12 hours. Alternatively, the timer can also be used to start the device 1-12 hours in the future. For example, it can be set to turn on automatically shortly before your return or before going to bed. No memory function, meaning that after a power interruption, the device must be restarted, therefore not suitable for operation on a timer. The water that is extracted from the air during the cooling process automatically evaporates with the warm air through the exhaust hose. When the device is turned off, a few drops of residual water remain, which are collected in a small internal tank. This tank needs to be emptied approximately once a week, depending on usage frequency, with a signal light indicating when it is full.Environmentally friendly refrigerant R290 The reduction of greenhouse gases (GWP – Global Warming Potential) and ozone depletion potential (ODP – Ozone Depletion Potential) is becoming increasingly important. As a manufacturer of mobile local air conditioning units, we also want to contribute to environmental protection by using R290 as a natural refrigerant.The abbreviation R290 stands for propane gas – a chemical compound made up of the naturally occurring elements hydrogen and carbon. The use of R290 as a natural refrigerant in mobile local air conditioning units has the advantage, compared to the previously used refrigerants with fluorinated hydrocarbons (here: HFCs), that its components are completely natural and ecological, and thus have neither ozone depletion potential nor any significant direct global warming potential.  Not suitable for year-round cooling of server rooms.       Technical data   cooling capacity 2010 W / 7000 BTH/h Power consumption 778 W Room size max. 20 m² air volume flow 320 m³/h on level 2 stages 2 Cool setting range 18 - 32° C operating modes cooling, ventilation exhaust hose Ø 127 mm, Length 1.5m refrigerant R290 power connection 230V / 50 Hz Noise level (manufacturer's specification)   Noise level (our measurement)   65 dB(A) 1.0 m distance fan stage 1 / 3: 56 / 59 dB(A) 2.5 m distance fan stage 1 / 3: 53 / 56 dB(A) Energy class TO shipping weight 21.50 kg Masse (H x B x T) 752 x 305 x 383 mm guarantee 2 years  

Learn more More Fewer

This innovative air cooler offers an energy-efficient and environmentally friendly way to cool open spaces and zones comfortably. Unlike conventional air conditioning systems, it completely forgoes refrigerants and compressors, instead utilizing the natural evaporative cooling of water. The principle of operation is simple and effective: Water is filled and pumped through an absorbent honeycomb filter. A fan draws warm room air through the water-saturated filter, cooling it down and blowing it into the room at about 5 °C cooler, depending on the humidity. This type of evaporative cooling is extremely energy-efficient compared to conventional compressor air conditioning units. Since the expelled air is not only cooled but also enriched with moisture, this air cooler is not suitable for small, enclosed spaces. Its strengths are showcased in open environments where natural air circulation is ensured. It is ideal for use on terraces, in street cafés, on garden patios, or for targeted cooling of workspaces in large halls.   Operation   The water tank holds a comfortable 20 liters, and the water consumption is 2 liters per hour. This means that the device can provide cooling air for up to 10 hours without needing to refill the water. The fan delivers a powerful 750 m³ of air circulation per hour and is adjustable in four stages. It can also be operated as a pure blower without the cooling mode being activated.   "For even air distribution, the automatic swing function can be activated, where the inner vertical louvers continuously swing back and forth from left to right. The outer horizontal louvers, on the other hand, can be manually adjusted to direct the airflow as desired to the front, up, or down."   Furthermore, additional features are included:Timer Function: With the practical 8-hour timer, you can schedule the activation or deactivation of your device in advance. So you don't forget to turn off the air cooler in the office in the evening, simply set the desired runtime beforehand. Conversely, it is also very pleasant when you enter the kitchen or living room in the morning, and the air cooler is already active.   Ventilation types: Constant recirculation air volume or mode "Air Freshening". In "Air Freshening", the ventilation speed is automatically regulated to alternate between stronger and weaker. This creates a pleasantly gentle airflow in the room, reminiscent of a natural sea breeze.   Fragrance oil diffuser: "Fill the dispenser with your favorite scent upon request. It will be continuously released into the room air during operation."   Ionizer for air purification: The ionizer enriches the expelled air with anions. These refresh the air in a natural way and reduce burdens such as odors, fine dust, bacteria, or even electromagnetic smog. Additionally, the easy-to-clean nylon mesh filter removes larger particles from the air.    All functions can also be conveniently adjusted from your seat using the remote control.   "So that you can always enjoy the cooling wherever it is needed, the air cooler can be easily moved from one place to another using the side grip recesses and the smooth-running transport wheels with a locking brake. For better stabilization on slightly sloped surfaces, additional stand feet are included in the delivery."      Excellent design   The PAE air coolers also score visually: the stylish housing design of the two air coolers has been awarded the prestigious "Red Dot Design Award" and the "IF Design Award."      Cooling with honeycomb filter, extra cold with cooling batteries   Unlike air conditioning units, air coolers do not use chemical refrigerants. The cooling process occurs in a completely natural way. Additionally, no exhaust hose is required, nor are complicated installations necessary. A mobile air cooler operates on the principle of natural evaporative cooling. You know this from personal experience: when you blow on damp skin, you feel an immediate cooling effect, as the evaporation process draws heat away. It is exactly the same with air coolers: inside the air cooler, there is a honeycomb filter soaked with water using honeycomb technology.  Refreshing Tip: The colder the water, the greater the cooling performance. If you place the four included cooling packs in the water container, the cooling performance can be further enhanced. You can also achieve this extra freshness kick with ice cubes.      Level indicator and direct hose connection   The clearly visible level indicator allows you to see at a glance whether there is still enough water in the voluminous 20-liter tank. When the water container is empty, the device automatically switches off and a signal LED blinks. If you do not want to fill the tank manually, it can also be conveniently connected to a faucet with the hose included in the delivery.      Year-round operation – air cooler in summer, air humidifier in winter   Thanks to its good humidification performance, the device can also be used as an efficient air humidifier in autumn and winter when the room air is too dry. Dry heating air can irritate the respiratory tract, dry out the skin, and redden the eyes. The humidification performance of this device is very high compared to conventional household humidifiers. Even at a low ventilation level, this device achieves the humidification performance of commercially available air humidifiers. When used as an air humidifier, the air is also blown out cooled. However, this cooling effect also decreases at a low ventilation level.     Advantages at a glance   • 4-in-1 Evaporative Air Cooler: Air Cooling, Ventilation, Air Purification, Air Humidification • Natural air cooling through evaporative cooling with honeycomb technology• Possibility of operation with four supplied cooling packs or ice cubes to increase cooling performance • High evaporation rate of 2 liters per hour• 20-liter large water container for long operations • Adjustable air outlet direction and automatically oscillating louvers• Possibility of a fixed water connection• Cleaning of the air by ionizer• Natural wind mode • IR remote control• 4 fan speeds• Timer function• Night mode• Integrated fragrance oil diffuser for optional room air aromatization• Particularly energy efficient• Easy to transport thanks to stable running wheels• Can be used on floors with a slight slope thanks to the stand feet.• Suitable for year-round operation. In summer, air cooler; in winter, air humidifier.      Scope of delivery   • Air cooling device • Infrared remote control• 4 Cooling batteries • Set for direct hose connection     Functions and Properties   • Air freshening function• Air cooling function• Ionization• Possibility of operation with cooling batteries• Ventilation function• Evaporative cooling with honeycomb technology• Shutdown when water tank is empty• Water level indicator• Warning light for empty water tank• Night mode• Continuous operation• adjustable blowing direction• Timer Function• Swing Function    Timer function   • Switch-on time selectable• Switch-off time selectable   filter   •   Air filter•   Honeycomb filter   mobility   •   Stand feet• Plastic transport rollers•   Recessed handles• Transport rollers -HA• Parking brakes• Feet       Technical data   evaporation capacity max. 2 Liter / Std. Max. room size our recommendation: max. 30 m² (manufacturer's specification: 60 m²) Air volume flow max. 750 m³ / Std. Ventilation levels 4 air exit velocity max. 11 m / Sek. Ambient temperature +5 to +43 °C Ventilator Radialventilator Operating noise max. 70 dB(A) at 2.5 m distance on the highest ventilation level voltage 220 - 240 V/50 Hz Nominal current consumption max. 0.65 A Power consumption max. 145 W Recommended Coverage 10 A Cable + plug approx. 1.6 m cable, 2-pole plug suitable for Swiss sockets Masse (H x B x L) 880 x 350 x 390 mm Weight unfilled 13 kg Control panel LED Touchscreen remote control and Trotec article no. 1.210.003.020 Guarantee 2 years

Learn more More Fewer

A recommendable mobile air conditioner with exhaust hose for quick cooling of workplaces, living rooms, and bedrooms during the warm season. The device features simple operation either on the device itself or via remote control. The exhaust air is directed out of the room using the supplied hose, e.g., out of the window or through the balcony door. On the front side of the housing, there is a powerful 3-stage fan with louvers, which can either be fixed in one direction or, with the swing function, fan the outgoing cold air vertically.     Execution / Scope of delivery • Plastic housing white• Operator panel with display of the desired temperature and the current room temperature• 4 The Role• Remote control• Extendable exhaust hose approx. 1.20m (with reduction attachment for tilt windows)• Cable approx. 1.50 m with Swiss plug (standard socket 230V / three-pole)• multilingual operating instructions including German, French, Italian• Energy class A.• Environmentally friendly refrigerant R290   Once the target temperature is reached, the device stops cooling (the ventilation continues to run as with most air conditioning units) and automatically turns back on when the room air warms up again (selectable range: 16°-32°C). The air conditioning can be limited in operating time with the timer between 1 - 24 hours, but can also be programmed 1-24 hours into the future, so that it automatically turns on, for example, 1 hour before your return or before going to sleep.Memory function"After a power interruption, the operation is automatically resumed with unchanged settings. Thus, this model is also suitable for operation with a timer.""Not suitable for year-round cooling of server rooms. As with all mobile air conditioning units, the "Crono" ventilation and motor are clearly audible, although noticeably quieter than devices with comparable performance."         Technical data   Features Cool, dehumidify, ventilate Energy class A (cool) cooling capacity 2640 W / 10000 BTU/h consumption cooling mode 1010 W Suitable for rooms up to 24m² air volume max. 350m³/h Ventilator 3-stage selectable temperature 16 - 32° C Ø exhaust hose inside/outside 14 / 15 cm (Length 150 cm) refrigerant R290  power connection 230V / 50 Hz shipping weight 22 kg Masse (H x B x T) 713 x 365 x 355 mm noise level Our measurement: 1.0 m distance fan level 1/3: 54 / 58 dB(A) 2.5 m distance fan stage 1/3: 51 / 55 dB(A) guarantee 2 years

Learn more More Fewer

Quick cooling and comfortable room climate at an affordable price. This 3-in-1 air conditioner offers efficient cooling for offices and rooms up to 20 m², making work more pleasant. In addition to the pure cooling operation, there is also a dehumidification and ventilation function.   When the preset target temperature (continuously adjustable between 17-35 °C) is reached, the integrated thermostat completely switches off the compressor in the unit. Compared to conventional designs, the air conditioning unit allows for an extremely economical cooling operation in this way. Of course, the compressor is automatically activated again when the target temperature is exceeded, as long as the unit is switched on.     Comfort features for well-being   "For a restful sleep without catching a cold, the device features a night mode that gradually raises the temperature. Additionally, the LED display can be completely turned off, so you won't be disturbed by any unnecessary light."    Two fan speeds and the variable adjustable airflow direction ensure optimal distribution of the air stream. In conjunction with the integrated 24-hour timer, electricity costs can be saved, as it allows for the timed switching on and off of the device. This is particularly helpful, for example, when the room is only used at certain times.    Follow-Me function: remote control with intelligent temperature measurement All functions and settings can be adjusted not only directly on the LED device control panel but also without getting up using the remote control. With the integrated "Follow-Me function," you can enjoy even more automatic comfort: The thermostat inside the air conditioning unit normally measures the current room temperature at its location and displays it on the LED screen. However, the remote control can also measure the temperature exactly at the location where it is currently situated. When the "Follow-Me function" is active, the air conditioning unit automatically receives the current temperature value from the remote control every 3 minutes and adjusts accordingly. So, for example, if you switch from a shaded spot to a sunny window with the remote control, the air conditioning unit will increase the cooling output to compensate for the warmer temperatures.    Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 1.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold growth. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal reservoir for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.     Installation and Maintenance   The air conditioning unit is set up with just a few simple steps and is ready for use immediately. The pre-assembled air filter cleans the room air of lint, dust, and pet hair and can be easily removed and cleaned.   Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.    Advantages at a Glance   • Energy efficiency class A • 2 kW cooling capacity  • Three operating modes: Cooling, Ventilation, Dehumidification• Two ventilation levels • Timer Function • Practical LED display • Display of room temperature • Easy-care membrane keypad• Adjustable air outlet direction • IR remote control • Removable air filter • Air purification function (pet hair, lint, dust)• Quiet operation   Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."     Technical data  cooling capacity max. 2 kW (7000 Btu/h) Our recommendation room size  max. 20 m² or 50 m³ Room size specification manufacturer max. 26 m² or 65 m³ Minimum room size 7 m² fan speeds 2 Selectable room temperature 17 - 30 °C dehumidification performance 1.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.3 A Recommended Coverage 10 A cable / connector 1.5 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (130g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 153 mm, Length 1.5 m Masse (H x B x T) 703 x 345 x 355 mm Weight 22.5 kg Trotec article no. 1.210.002.012 guarantee 2 years  

Learn more More Fewer

A good air conditioner for cooling bedrooms, living rooms, or offices. Simply set your desired temperature in the range of 16°C to 31°C, and the device will automatically cool the room air to the set value. The extracted heat is expelled through an exhaust hose out of the window.  comfort functions With remote control, 24-hour timer, and automatic mode, this model offers you convenient control from your seat, pre-planned on or off switching, as well as self-cooling depending on the room temperature.  Ventilator function – with and without cooling Pure ventilation operation is also possible: a two-stage adjustable fan blower provides fresh air and gentle air circulation in the room with an air volume of up to 320 m³/h – even without activating the cooling compressor. The direction of the airflow can be manually adjusted with the horizontal air deflection flaps, so that the fresh breeze arrives exactly where you want it. In addition, the integrated air filter on the back of the unit filters lint, dust flakes, and pet hair from the room air – an advantage not only for allergy sufferers.  Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 0.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold formation. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal collection container for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.  Mobile and flexible instead of drilling and plugging If you want to place the device in another room, it can be easily moved from one place to another with its smooth-rolling transport wheels. Unlike permanently installed air conditioning units, you can always use a mobile air conditioner exactly where cooling is needed – without drilling, screwing, or plugging. You just need to secure the exhaust hose included in the delivery in a window or door opening, and you can start cooling the room. "To prevent warm outside air from entering the room to be cooled through the slightly opened windows or doors, we offer window and door seals as optional accessories. This way, you can cool even more efficiently."  Tip for restful sleep If you want to fall asleep on warm summer nights with gentle cooling, you can set a timer to have the air conditioning unit turn off by itself after a while to prevent your body from getting too cold during the night.  Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.  Advantages at a Glance • Suitable for rooms up to 24 m² / 60 m³• Energy efficiency class A• 2.6 kW cooling capacity• 3 operating modes: cooling, ventilation, dehumidification• 2 ventilation levels• Adjustable air outlet direction• Target value preselection in the range of 16°C to 31°C• Energy-saving operation through automatic switching off/on upon reaching/exceeding the target value• 24-hour timer• Remote control + intuitive LED display• Removable air filter against pet hair, lint, dust flakes• Quiet operation • Environmentally friendly refrigerant R290• Mobile air conditioners - Comfortable cooling machines  Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."  Technical data  cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size   max. 24 m² or 60 m³ Room size specification manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.5 A Recommended Coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, Length 1.5 m Masse (H x B x T) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1.210.002.022 guarantee 2 years  

Learn more More Fewer

  A well-thought-out, powerful air conditioner for cooling living rooms and bedrooms. It features easy operation either on the unit itself or via remote control. The exhaust air is directed out of the room using the included hose, e.g., through the window or balcony door. Energy class A. Powerful blower, with adjustable louvers the direction of the cold air can still be easily controlled.   Execution / Scope of delivery• Plastic housing white/anthracite• Operator panel with display of the desired temperature and the current room temperature• 4 The Role• Remote control• Extendable exhaust hose approx. 1.40m (this model does not come with a narrowing attachment for tilt windows)• Cable approx. 1.50 m with Swiss plug (standard socket 230V / three-pole)• Operating instructions in German + French   Once the target temperature is reached, the device interrupts cooling (the ventilation continues to run as with most air conditioning units) and automatically turns back on when the room air warms up again (selectable range: 18-32°C). The air conditioning unit can be limited in operating time with the timer between 1 - 24 hours, but can also be programmed 1-24 hours into the future, so that it automatically turns on, for example, 1 hour before your return or before going to sleep. No memory function, meaning that after a power interruption, the device must be restarted, therefore not suitable for operation with a timer. extra cooling"A side-inserted compartment can be filled with water, which cools the expelled air by about 2°C again. This brings a welcome performance increase during the warmest season."Storage compartment for accessoriesThe hose and the included accessories can be conveniently supplied from above into the device itself in a specially prepared compartment. "As with all mobile air conditioning units, the ventilation and motor are also clearly audible in this model, although the overall noise level has been noticeably reduced compared to earlier mobile air conditioners in this performance class."Not suitable for year-round cooling of server rooms.      Technical data  Features Cool, dehumidify, ventilate Energy class TO cooling capacity 3200 W / 11000 BTU/h consumption cooling mode 1230 W Suitable for rooms up to 28 m² air volume max. 350m³/h Ventilator 3-stage Selectable temperature range 18 - 32° C Ø exhaust hose inside/outside 132 / 142mm (Length 140 cm) refrigerant R290  power connection 230V / 50 Hz shipping weight 31 kg Masse (H x B x T) 744 x 485 x 313 mm noise level (our measurement) 1.0 m distance fan level 1/3: 56 / 58 dB(A) 2.5 m distance fan stage 1/3: 53 / 54 dB(A) guarantee 2 years

Learn more More Fewer

"In our opinion, the best mobile air conditioning unit on the market. The slightly higher price is justified for those who value aesthetics, comfort, and operating noise."   In principle, the "Milo" is a freestanding air conditioning unit, whose exhaust is directed either out of the window or into an adjacent room via a hose. It features a powerful fan with slats at the top of the housing, which can either be fixed in one direction or use a swing function to fan the outgoing cold air vertically. Despite a lot of recirculation, the operating noise is quieter than that of other devices in this category, although it is still quite noticeable, as is the case with all mobile air conditioners.Once the desired temperature is reached, the device interrupts cooling (or heating in heating mode) until the temperature changes again. The ventilation runs continuously, as with most air conditioning units, to circulate the air in the room as effectively as possible. The selectable temperature range is from 16 to 30°C. With the timer, the operating duration can be limited to between 1 - 24 hours. Additionally, a start time for operation can be programmed 1-24 hours into the future, so that it automatically turns on, for example, 1 hour before your return or before going to sleep.The following features distinguish the "Milo Plus" from standard devices:Maintain constant temperatureBasically, it can be chosen whether the device cools or heats. In "Auto" mode, however, a desired constant temperature can also be selected. If the room temperature falls below this, the system operates in heating mode; if it is above, it automatically switches to cooling function. This option is very rare in mobile devices.   WIFI function"All functions can be conveniently controlled via Wi-Fi through an app. Of course, the device can also be controlled traditionally via a keyboard or with the remote control included in the delivery."    "I feel" function on the remote controlThe remote control features the so-called "I-Feel function" like more expensive split units. With this function, the temperature is not measured at the unit, but at the remote control. This means that you should ideally place the remote control close to you, for example on the sofa (the unit must have a line of sight to the remote control), and with that, you have the perfect temperature where you want it.parental controlsIf necessary, the child lock can be activated to prevent children from changing the settings.Mold protection "X-FAN" (only on remote control)'With this function, the ventilation continues for 2 minutes after cooling or dehumidification. This dries the still moist interior of the device and prevents the formation of mold in the device.'Memory function"After a power interruption, the operation is automatically resumed with unchanged settings. Thus, this model is also suitable for operation with a timer."Environmentally friendly refrigerant R290The green thought is also taken into account: The "Milo Plus" is equipped with the latest refrigerant R290, making it practically climate-neutral. R290 has minimal environmental impact, or in numbers: 600 times less than the predecessor products that were still used until recently. Of course, an air conditioning unit with the latest refrigerant will never be as environmentally friendly as a jump into cold water or unwavering sweating.Execution / Scope of delivery• Plastic housing white• Operator panel with display of the desired temperature and the current room temperature• 4 The Role• Remote control• Extendable exhaust hose approx. 1.20m (with reduction attachment for tilt windows)• Cable approx. 1.50 m with Swiss plug (standard socket 230V / three-pole)• Multilingual operating instructions including German, French, Italian• Energy class A in cooling operation, A++ in heating mode.• Environmentally friendly refrigerant R290   Not suitable for year-round cooling of server rooms. As with all mobile air conditioning units, ventilation and motor noise are also clearly audible with this device, although noticeably quieter than with devices of comparable performance, especially at the lowest fan setting.    Technical data  Features: Cooling, heating, dehumidifying, ventilating Energy class: A (cooling), A++ (heating) Cooling capacity: 3500 W / 13000 BTU/h Consumption Cooling Mode: 1300 W Heating power: 3500 W / 13000 BTU/h Consumption Heating Mode: 1100W Suitable for rooms up to 30m² air volume: max. 380m³/h Ventilator 3-stage selectable temperature: 16 - 30° C Ø exhaust hose inside/outside: 14 / 15 cm (Length 120 cm) refrigerant: R290  power connection: 230V / 50 Hz Shipping weight: 36 kg Mass: Height x Width x Depth: 835 x 385 x 405 mm Noise level: Our measurement: 1.0 m distance fan level 1/3: 52 / 56 dB(A) 2.5 m distance fan stage 1/3: 49 / 53 dB(A) Guarantee: 2 years

Learn more More Fewer

This offer consists of used devices from our equipment rental, which we are offering here at a significantly reduced price. Technically flawless, there may be minor signs of use visually.   "Unpacked and with 1 year warranty."   While stocks last.      The Ulisse 13DCI bridges the gap between conventional mobile monoblock air conditioning units and permanently installed split air conditioning systems by combining the advantages of both systems. It is portable and consists of an indoor and outdoor unit connected by a flexible refrigerant line. The outdoor unit can be conveniently placed on the terrace or mounted on an exterior wall, while the indoor unit is set up in the room or office to be cooled. Compared to monoblock air conditioning units, the Ulisse 13DCI offers significantly quieter operation and improved energy efficiency. Thanks to state-of-the-art inverter technology, the compressor's performance automatically adjusts to the actual cooling demand, thereby avoiding continuous operation at full capacity. The operation of the device is incredibly simple and comfortable via the included remote control. The desired target temperature can be set in 1°C increments within the range of 10°C to 32°C. As with all air conditioning units, the actual achievement of the target temperature depends on the room size and heat input, for example, from sunlight or devices present in the room. The "I Feel" function allows for precise temperature control at the user's location. The device has two measurement points: one on the device itself and another in the remote control. By pressing the "I Feel" button, the remote control measures the temperature at the current location and adjusts the air conditioning unit accordingly. For example, the remote control can be placed on the sofa to ensure an optimal temperature directly at the seating area. For the "I Feel" function to work properly, a direct line of sight between the remote control and the indoor unit is required. The warm room air is drawn in at the front of the indoor unit, cooled, and then blown back into the room from the upper front area. During the cooling process, excess moisture is simultaneously removed from the air. The condensate is directed through a hose via the connection line to the outdoor unit, where it is automatically misted before the fan.Important to know when dealing with mobile split air conditioning units • the indoor and outdoor units are connected by a copper refrigerant line. Copper is not reversible, meaning: if the copper line is bent, it is destroyed and must be replaced (cost for a 2m line: Fr. 310.-).• If the line between the indoor and outdoor unit is to be routed through a hole (e.g., in the wall), it must be disconnected from the outdoor unit. This requires knowledge in handling refrigerant lines and should be done by a professional. Otherwise, it is likely that refrigerant will escape during the disconnection process, which will impair cooling performance. We have appropriately trained professionals and can offer you both delivery and installation.    Scope of delivery Split air conditioning 13dci• Mobile air conditioning unit WITH WIFI function• Indoor and outdoor unit with 2m refrigerant line (already connected and ready for operation)• Remote control• Cable approx. 2.30 m with Swiss plug (standard socket 230V / three-pole)• Operating instructions in German + IT / FR / EN + other languagesLatest series"With us, you will receive the latest series with environmentally friendly R32 refrigerant. The optional extension lines are available for the old R410A or the new R32. Please note when ordering lines, which refrigerant is used in your device." Optional accessoriesextension cords• The length of the refrigerant line included in the delivery is 2m. This can be extended if necessary with extension lines of 2m or 4m up to a maximum of 6m.Wall mount for outdoor unit• If you want to mount the outdoor unit on a wall, a suitable wall bracket is optionally available from us (Fr. 49.-).     SEER: 5.2  Technical data  Energy Efficiency Class A Operating modes Cooling, ventilation For rooms up to max. 40m² (depending on heat sources) Cooling performance 3920 W / 13340 BTU/h Connection voltage 230 Volts - 50 Hz Adjustment range temperature 10° - 32° C Power consumption 1600 W Dehumidification capacity approx. 1.9 L/h coolant R32 Operating noise dB(A) (min/max) 37 - 40 (our measurement)34 - 37 (Manufacturer's specification) Air circulation (level 1-2-3) 335-375-400 m³/h Operation remote control Cable included in the delivery 2 m (ø40 mm) Mass Indoor Unit (HxWxD) 79 x 58 x 25 cm Mass Outdoor Unit (HxWxD) 49 x 53 x 25 cm Weight indoor / outdoor unit 42 / 15 kg Guarantee 1 year   Quick course to establish WIFI connection to Ulisse   Connect device to power supply (or unplug and plug back in) Press the power button for 5 seconds until the WIFI light blinks. Connect desired device to WLAN network "UI_Setup" Enter and open the following in the internet; 192.168.4.1 Select the WLAN to which the Ulisse must be connected, enter the password, click "APP Connect." Change username and password upon request and click «APP Connect» again. Ulisse can now be served.

Learn more More Fewer

This plug-and-play compact unit does not require an outdoor unit. It can be used as a cost-effective solution for use in hotel rooms, offices, bedrooms, and in various container applications for schools or temporary setups. Thanks to inverter technology, it is economical and quieter than similar models.   Assembly The device is mounted on an exterior wall in the room. On the back, there is an opening through which outside air is drawn in, as well as an opening through which warm air is blown out (or in heating mode: cold air is blown out). Before the system can be installed, two core drillings are required in the wall, which are aligned with these openings. You can find the details in the installation manual in the "Downloads" section on this page.  cooling and heating Thanks to heat pump technology, the "Apollo" can be used for both cooling and economical heating of rooms. The appropriate function is selected at the push of a button.  program functions The operation is simple and can be done either on the device's display itself or via the WLAN function using a mobile phone or tablet. "Eco" function: for lower consumption"Turbo" function: desired temperature in the shortest time"Anti-Cold Wind" function in heating mode: The air is only released into the room when it has been sufficiently warmed up."Sleep" function: Optimizes the operation of the air conditioning unit during nighttime hours."Autodiagnosis" function: Display of errors on the device screen for easy troubleshooting.  Features and Benefits • Ideal for a room size of 70m³• Remote-controlled WLAN with its own app• 4 in 1: Cooling, heating, dehumidifying, ventilating• Energy efficiency class A in cooling mode and in heating mode• Automatic swivel movement or individually adjustable position of the air deflector (Flap) to optimally direct the airflow in the room.• Programmable Timer ON/OFF 24h• 2 holes in the wall and unobtrusive aesthetics• Type of condensate drainage: Through external or internal piping• DC inverter technology, maximum comfort, minimal consumption• Ventilation speeds: 3 + Auto  Technical data Cooling capacity: 2400 W / 8530 BTU/hHeating power: 2400 W / 8530 BTU/hRecommended room size: 70 m³Energy efficiency class: AHousing color: whiteRefrigerant: R32 (0.39 kg)Noise level indoor unit: 56 dB(A)Dimensions (H x W x D): 615 x 965 x 200 mmNet weight: 36.2 kgWarranty: 24 months

Learn more More Fewer

The Ulisse 13DCI bridges the gap between conventional mobile monoblock air conditioning units and permanently installed split air conditioning systems by combining the advantages of both systems. It is portable and consists of an indoor and outdoor unit connected by a flexible refrigerant line. The outdoor unit can be conveniently placed on the terrace or mounted on an exterior wall, while the indoor unit is set up in the room or office to be cooled. Compared to monoblock air conditioning units, the Ulisse 13DCI offers significantly quieter operation and improved energy efficiency. Thanks to state-of-the-art inverter technology, the compressor's performance automatically adjusts to the actual cooling demand, thereby avoiding continuous operation at full capacity. The operation of the device is incredibly simple and comfortable via the included remote control. The desired target temperature can be set in 1°C increments within the range of 10°C to 32°C. As with all air conditioning units, the actual achievement of the target temperature depends on the room size and heat input, for example, from sunlight or devices present in the room. The "I Feel" function allows for precise temperature control at the user's location. The device has two measurement points: one on the device itself and another in the remote control. By pressing the "I Feel" button, the remote control measures the temperature at the current location and adjusts the air conditioning unit accordingly. For example, the remote control can be placed on the sofa to ensure an optimal temperature directly at the seating area. For the "I Feel" function to work properly, a direct line of sight between the remote control and the indoor unit is required. The warm indoor air is drawn in at the front of the indoor unit, cooled, and then blown back into the room from the upper front area. During the cooling process, excess moisture is simultaneously removed from the air. The condensate is directed through a hose via the connection line to the outdoor unit, where it is automatically misted before the fan. Important to know when dealing with mobile split air conditioning units • the indoor and outdoor units are connected by a copper refrigerant line. Copper is not reversible, meaning: if the copper line is bent, it is destroyed and must be replaced (cost for a 2m line: Fr. 310.-).• If the line between the indoor and outdoor unit is to be routed through a hole (e.g., in the wall), it must be disconnected from the outdoor unit. This requires knowledge in handling refrigerant lines and should be done by a professional. Otherwise, it is likely that refrigerant will escape during the disconnection process, which will impair cooling performance. We have appropriately trained professionals and can offer you both delivery and installation.    Scope of delivery Split air conditioning 13dci• Mobile air conditioning unit WITH WIFI function• Indoor and outdoor unit with 2m refrigerant line (already connected and ready for operation)• Remote control• Cable approx. 2.30 m with Swiss plug (standard socket 230V / three-pole)• Operating instructions in German + IT / FR / EN + other languagesLatest series"With us, you will receive the latest series with environmentally friendly R32 refrigerant. The optional extension lines are available for the old R410A or the new R32. Please note when ordering lines, which refrigerant is used in your device." Optional accessoriesextension cords• The length of the refrigerant line included in the delivery is 2m. This can be extended if necessary with extension lines of 2m or 4m up to a maximum of 6m.Wall mount for outdoor unit• If you want to mount the outdoor unit on a wall, a suitable wall bracket is optionally available from us (Fr. 49.-).     SEER: 5.2  Technical data  Energy Efficiency Class A Operating modes Cooling, ventilation For rooms up to max. 40m² (depending on heat sources) Cooling performance 3920 W / 13340 BTU/h Connection voltage 230 Volts - 50 Hz Adjustment range temperature 10° - 32° C Power consumption 1600 W Dehumidification capacity approx. 1.9 L/h coolant R32 Operating noise dB(A) (min/max) 37 - 40 (our measurement)34 - 37 (Manufacturer's specification) Air circulation (level 1-2-3) 335-375-400 m³/h Operation remote control Cable included in the delivery 2 m (ø40 mm) Mass Indoor Unit (HxWxD) 79 x 58 x 25 cm Mass Outdoor Unit (HxWxD) 49 x 53 x 25 cm Weight indoor / outdoor unit 42 / 15 kg Guarantee 2 years   Quick course to establish WIFI connection to Ulisse   Connect device to power supply (or unplug and plug back in) Press the power button for 5 seconds until the WIFI light blinks. Connect desired device to WLAN network "UI_Setup" Enter and open the following in the internet; 192.168.4.1 Select the WLAN to which the Ulisse must be connected, enter the password, click "APP Connect." Change username and password upon request and click «APP Connect» again. Ulisse can now be served.

Learn more More Fewer

Improve the working conditions in your factory, hangar, or workshop with our mobile evaporative coolers. They provide an efficient and cost-effective way to create a refreshing and productive environment for your employees and customers.     Important functions  Efficient and durable spot cooler for industrial applications Quiet operation even with high air flow Standard automatic swivel function Large water tank for long operation Large, durable wheels with brakes enable easy movement. Manually connect the water hose or water tank and provide your employees with comfort. Corrosion-resistant plastic housing Including air filter for easy maintenance Remote control for easy speed adjustment UV lamp that disinfects the water   Advantages of Evaporative Cooling  The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Nearly maintenance-free equipment     How does it work? The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates, and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance.     Evaporative cooling and humidity A certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity. "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most."   "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air."   "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out."       Application examples  Agriculture for cooling livestock barns Construction for outdoor events and cooling of marquee tents Cooling of industrial and production halls Cooling of terraces and garden restaurants Rental   Technical data Air performance: 12000 m³/h Loaded Airflow: 8000 m³ Maximum area: 250 m² Energy consumption: 500 W Mains voltage: 220-240 V /50 Hz Rated current: 2,3 A Water consumption: 8-10 liters per hour Tank capacity: 80 Liter Direct water connection: ½ inch Water status indicator: Yes Sound level: 67 dB(A) Device dimensions (LxWxH):  1050 x 600 x 1460 mm Net / Gross Weight: 50/55 kg Cooling filter volume: 0.08 m³ Guarantee: 2 years  

Learn more More Fewer

Cool your factory, hangar, or workshop for little money. Our mobile evaporative coolers offer a cost-effective alternative to traditional air conditioning and create a pleasant working environment for your employees or customers.   Important functions Efficient and durable spot cooler for industrial applications Quiet operation even with high air flow Standard automatic swivel function Large water tank for long operation Large, durable wheels with brakes enable easy movement. Manually connect the water hose or water tank and provide your employees with comfort. Corrosion-resistant plastic housing Including air filter for easy maintenance Remote control for easy speed adjustment UV lamp that disinfects the water   Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Almost maintenance-free equipment   How does this work?The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance.   Evaporative cooling and humidityA certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity.   "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air."   "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out."     Technical Data BC 221: Kühlfilter dm³: 120 Air performance m³/h: 22,000 Loaded air flow m³/h: 15,000 Maximum area m²: 330 Energy consumption W: 800 Mains voltage V/Hz: 220-240/50 Rated current A: 3.7 Water consumption l/h: 12-18 Tank capacity l: 120 Direct water connection size: ½" Water status indicator: Yes Sound level dB(A): 67 Device dimensions (L x W x H) mm: 1230 x 640 x 1730 Net / Gross weight kg: 64/69 Suitable for: agriculture Automobile Buildings and commercial spaces construction industry emergency services Events and temporary buildings Industry and Production Leisure and Recreation Defense and Aerospace Rental and Leasing

Learn more More Fewer

The BC 341 offers an innovative solution for the air cooling of large areas. With integrated UV light for hygienic air and minimal energy consumption, it is perfectly suited for rooms up to 400 m², where conventional air conditioning systems reach their limits.   Important functions Powerful air volume of 30,000 m³/h for cooling large work areas No installation required, no hoses need to be laid. Low operating costs Easy maintenance Evaporation filter mats that retain dirt UV lamp that disinfects the water Low energy consumption – 1.3 kW Ideal for workshops and warehouses, plastic, glass, assembly plants and paint shops, agriculture, greenhouses, and aircraft hangars.   Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Nearly maintenance-free equipment   How does it work?The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates, and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance.   Evaporative cooling and humidityA certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity.   "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air." "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out."     Technical Data BC 341: Kühlfilter dm³: 340 Air performance m³/h: 30,000 Loaded air flow m³/h: 23,000 Maximum area m²: 400 Energy consumption W: 1050 Mains voltage V/Hz: 220-240/50 Rated current A: 4.9 Water consumption l/h: 10-15 Tank capacity l: 200 Direct water connection size: ½ Water status indicator: Yes Sound level dB(A): 70 Device dimensions (L x W x H) mm: 1690 x 920 x 1910 Net / Gross weight kg: 130/140 Suitable for: agriculture Automobile Buildings and commercial spaces Construction Emergency services Events and temporary buildings Industry and Production Leisure and Recreation Defense and Aerospace Rental and Leasing

Learn more More Fewer

This mobile split air conditioner impresses with strong cooling performance as well as the ability to place the indoor and outdoor units up to 30 m apart. Thanks to its appealing design and quiet operation, it is ideally suited for representative areas, trade fairs, and for cooling retail stores or fitness centers. functionality The air conditioning unit absorbs heat in a cooling system. From there, the heat is transferred to the closed cold water/glycol system. It is then pumped through the outdoor unit, where the water is cooled and the heat is dissipated. The operation is possible at ambient temperatures of up to 45 °C.   The indoor unit is connected to the outdoor unit via two flexible hoses with quick-release fittings. These hoses are supplied in lengths of 10 m and can be connected to a maximum length of 30 m. Therefore, the indoor and outdoor units can be positioned up to 30 meters apart and at different heights (up to 10 meters) if needed.   Intelligent control reduces energy consumption The indoor unit is equipped with an EC fan. This means that the speed of the fan intelligently adjusts to the actual cooling demand. This automatic regulation minimizes energy consumption and avoids unnecessary noise, allowing you to work in a quiet environment. Furthermore, the fan of the outdoor unit dynamically adjusts to the outside temperatures, ensuring optimal performance regardless of weather conditions.   Remote monitoring possible "Through a mobile app, it is possible to monitor and control the operation. Managing multiple devices simultaneously is also effortless."    Advantages at a Glance • Robust metal construction• High-efficiency cooling circuit• Cooling capacity of up to 7 kW• Air flow rate of 800 to 1450 m³/h• Operating temperatures of up to -5°C• Simple installation without prior training• Quick connections for cooling lines• Indoor unit with infinitely variable fan speedand adjustable grid• Remote control via app• Up to 30 meters installation distance betweenIndoor and outdoor unit• Slim water and glycol hose connectionmakes large air ducts unnecessary   scope of delivery 1 x indoor unit1 x outdoor unit1 x Standard Hose Set1 x cable for the electrical connection of indoor and outdoor unit1 x power cable (for indoor unit)   Important  The power consumption is a maximum of 2950 watts.This means that a Type 23 socket (16 Amperes) is required for operation.       Technical data operating modes cooling, ventilation For rooms up to max. 150m² (depending on heat sources) Cooling capacity max. Cooling capacity at 25 °C 7000 W / 23884 BTU/h6500 W / 22178 BTU/h connection voltage 230 Volts - 50 Hz Operating temperature range -5 °C - +45 °C Power consumption max. 2950 W Protection class indoor / outdoor unit  IP44 / IP55 refrigerant R454C (840 gr), GWP 148 Refrigerant of the outdoor unitSpecification of the glycol 10.5 liters of water, 4.5 liters of glycol Monopropylene glycol 1.2 Sound level at 1m distance 62 dB (A), manufacturer's specification air circulation min. 800 m³/h - max. 1450 m³/h service Touch Screen + App Cable included in the delivery 10 m Mass Indoor Unit (H x W x D) 1025 x 880 x 400 mm Mass Outdoor Unit (H x W x D) 580 x 700 x 250 mm Weight indoor / outdoor unit  114 kg / 19 kg guarantee 2 years    

Learn more More Fewer