"Fits all 3-pole plugs according to EU standards, e.g. Shuko/Germany, etc. The fixed adapter is pressed as an intermediate plug onto the existing foreign plug and cannot be removed without damage."CEE7/VII - CH Typ12for devices up to a maximum of 10A permitted"We also carry the reverse version in our range, for Swiss devices that are to be connected to European sockets."

Learn more More Fewer

environmentally conscious   The Trotec liquid descaler consists of organic acids that can be 100% biologically decomposed.     active ingredient indicator   The striking pink color of the descaler is used to check the active ingredient. As soon as the color fades and starts to turn yellow, the liquid loses its descaling power.     Energy-saving   "A calcification causes electronic devices to require up to 30% more power to deliver the same performance as a non-calcified device. Therefore, clean your devices regularly to save energy. The Trotec liquid descaler helps you with that!"     quality product   The 100% biodegradable liquid descaler from Trotec is a quality product 'Made in Germany'. It is made on an amidosulfonic acid basis and contains maleic acid to prevent re-scaling.     Universal descaler for household appliances   The descaler with color indicator is suitable not only for cleaning the coffee machine/fully automatic coffee machine, but also for all other household appliances with a water tank, such as air conditioners, humidifiers, kettles, or steam irons.     Data   • Quality product, made in Germany• Naturally and Environmentally Friendly - 100% biodegradable• Content: 1000 ml• Safety lock/Child safety lock• Universally applicable: coffee machine, fully automatic coffee machine, espresso machine, air conditioning units, humidifiers, etc.• Suitable for devices from all appliance manufacturers• Mixing ratio: 0.5 liters of descaler for a 30-liter humidifier water tank.   "For further information, please refer to the descaling instructions of your device manufacturer."

Learn more More Fewer

Universally applicable safety glasses. They protect against UV rays during non-destructive leak detection using tracer detection. They are also perfectly suitable for use in the manufacturing industry. They protect against specific risks such as abrasion, airborne particles, biological hazards, etc.  EG Category PSA Category II, EN 166/169; European Directive 89/686/EEC, optical class 1, F - Impact with low energy (45 m/s):The glasses meet the EN166/169 standard, which prescribes 100% UV protection against radiation with a wavelength of 380 to 400 nanometers. The standard is set by the European Union for occupational safety glasses and is an important quality feature for UV protection glasses.  Characteristics • Made of polycarbonate for high impact resistance and effective UV protection• Clear, color-neutral tint that provides good protection against glare.• Scratch-resistant, also ideal as overglasses  Best protection against UV radiation When working with UV light, one must always wear glasses to protect the eyes from harmful UV radiation. For example, when using UVA handheld lamps, UV-TrackMaster, or leak detection device UV-Torchlight 15F. Otherwise, harmful effects such as corneal inflammation, cataracts, or retinal inflammation may occur.  Technical data EN166/169 Standard: fulfilledUV protection: 100%Tint: clear, color neutralMaterial: PolycarbonatApplication area: Industry, OutdoorTrotec Article No. 3.510.011.100

Learn more More Fewer

Massive CEE connection cable with black plastic sheath for high current connection. Suitable for use with power-intensive devices such as heating fans, construction machinery, etc. Includes coupling and plug, the ideal connection cable at a special price.

Learn more More Fewer

This universal device tripod features a stable central brace with locking for secure standing and comes with a robust 3-way head including a quick-release plate with a standard 1/4" connection for optimal alignment of measuring devices or cameras. The head can be tilted up to 90 degrees to the side, allowing for portrait shots or angled planes. Non-slip and flexible rubber feet help the user adjust to different ground conditions. A quick-release clamp ensures fast and uncomplicated setup. With the panorama ball head, almost any setting is possible when it comes to stable camera positioning or precise measurements. By extending the telescopic rods, you can achieve a comfortable working height of up to 150 cm. If necessary, the quick-release plate can be detached with a single hand movement when the situation requires it. Trotec Article No. 6.300.000.200

Learn more More Fewer

Replacement cartridge 700ml, suitable for hand sanitizer dispenser "H115".Application:"After hand cleaning for separate hand disinfection, ideal for dispenser systems and regular use in the professional field."Composition:Ethanol 75%, skin-protecting components, approved. Always read the label and product information before use.Spectrum of effects and dosage:Hygienic hand disinfection: Allow 3 ml of concentrate to take effect for at least 30 seconds. The hands/forearms must remain moist with the concentrated preparation throughout the entire application time. Suitable for disinfection in food businesses. Ready to use. Also effective against enveloped, Noro, and Rota viruses.Technical data Weight: 1kg

Learn more More Fewer

With a power consumption of 2000 watts and flexible adjustment of hot air temperature and blower performance, this hot air blower allows you a wide range of applications from soldering, welding, and tinning work to adhesive curing and paint removal, as well as shrink wrapping or paint drying.     Versatile configurable for a variety of applications   To ensure that it always operates at a controlled high temperature during use, the device offers many comfortable adjustment options. The hot air temperature can be practically adjusted in 10-degree increments between 50 °C and 650 °C at the push of a button. Similarly, the air volume can be regulated in 5 stages between 250 and 500 liters per minute. In this way, you can optimally configure the "Hystream" for any application.   "Particularly practical is the rear color LCD. On the display, you not only have the respective working values of temperature and air volume clearly in view, but a color change also informs you when the selected temperature value has been reached. Green signals the heating phase, red confirms the achievement of the target temperature – it's that simple."    The handling is just as simple: the low weight of only 800 g is noticeably pleasant, especially during longer operations, and the ergonomic design of this hot air device ensures comfortable working and a secure grip through the pistol grip with soft grip and protective guard.     Practical functions for more comfort and safety   The hot air blower is electronically controlled and thus ensures a constant working temperature even during continuous operation – a must for particularly precise soldering and welding work. Additionally, an overheating protection is integrated, which automatically switches off the heating element in case of overload, while the blower remains in operation.    "In addition to the 60 hot air levels for high temperatures up to 650 °C, the 'Hystream' also features a cold setting at 50 °C for quick cooling of the material being processed or for changing the attachment nozzle."    "For each temperature level, the heating coil can also be cooled down particularly gently and quickly before the device is stored away again after use."   Thanks to the specially balanced weight distribution, this thermal tool can also be used effortlessly in a stationary, tip-proof stand operation for hands-free working.    This allows you to hold the workpiece securely with both hands, which is particularly practical when bending pipes. But the stationary operation is also an advantageous solution for longer soldering tasks and many other stationary applications.     All-rounder at professional level – special applications included   The nozzle set included in the standard delivery makes this hot air blower the optimal thermal tool for practically any task:    • A deflector nozzle protects heat-sensitive substrate materials from overheating by redirecting heat rays. Ideal for removing old paint coatings and putty from window frames or for restoration work.    • With the grill starter nozzle, the charcoal is well-lit and ready for grilling in just a few minutes.     • The reduction nozzle focuses the heat beam for more precise work, for example for paint removal in corners or for welding.    • And a wide spray nozzle ensures a continuous area air distribution, optimal for the large-scale removal of old paint coatings or even drying of filler work.    When not in use, the integrated hanging loop in the cable provides a helpful hanging option for quick access.      Advantages at a Glance   • 2000 Watt powerful hot air blower• Ergonomic pistol design with soft grip and protective guard• Large, easily readable LCD display of the selected power values• Display color change upon reaching the desired temperature• Air volume adjustable in 5 stages between 250 to 500 liters per minute• Temperature control from 50 °C to 650 °C in 10-degree increments• Safe operation through overheating protection• Hanging eye on the cable as a storage option• Thanks to balanced weight distribution, it is stable in stationary operation when working hands-free.• Nozzle set for many special applications already included in the scope of delivery• Cold setting for rapid temperature reduction• Fatigue-free working thanks to the low weight   Technical data  power connection 230V / 50 Hz cable / connector approx. 2 m, EU plug with Swiss fixed adapter air volume flow 250 - 500 Liters/Hour fan speeds 5 Blow-out temperature max. 650 °C Weight 800 g Masse (B x H x T) 270 x 210 x 60 mm Regulating Temperature in 10 °C increments Trotec article no. 4.435.000.020 guarantee 2 years

Learn more More Fewer

This color powder is visually recognizable without technical aids and is ideally suited for direct gradient or connection control in the detection of faulty or leaky connections and incorrect discharges from drainage systems. The productive marking dye can be mixed in water as a color solution in any desired color intensity, as the pure powder mixtures are completely free from dosage limits due to their extreme environmental compatibility. Further applications lie in tracer hydrology, for example for flow path verification, for visualizing the mixing and flow behavior in flowing waters, lakes, reservoirs, or water treatment plants, as well as for monitoring flow rates and flow velocities in fish ladders. "The Pure dye is also an ideal tool for simulated hazardous material visualizations during GSG exercises of the fire department.""Individually adjustable for every need" "Due to their 100% natural food-grade ingredients, the colorants of the Pure series can be dosed as desired - an overdose is not possible.""Depending on the desired intensity, 2 g of pure dye can be added per 1 to 5 liters of water, thus producing a pure dose of between 100 and 500 liters of color solution."  Advantages at a Glance • 100% natural, food grade• hypoallergenic, vegan, kosher and halal• 100% biodegradable• Safe for humans and animals• No impairment of water quality• No maximum dosage limits• Water-soluble powder - easy handling  composition Radish, apple, black currant, citric acid, and maltodextrin  Technical data  Masse (L x B x H) 70 x 70 x 165 mm Contents 200 g ingredients Radish, apple and black currant, citric acid and maltodextrin scope of delivery 1 Dose Trotec article no. 3.510.012.051

Learn more More Fewer

Extension cable with plug and coupling (suitable for devices such as heaters up to 15kw):380/400V 32A Q4.0 mm² Massive CEE connection cable with black plastic sheath for high current connection. Suitable for use with power-intensive devices such as heating fans, construction machinery, etc. Includes coupling and plug, the ideal connection cable at a special price! Technical data Cable cross-section: 4 mm²CEE plug: 32A 5p 6h 400VCEE connector: 32A 5p 400VWarranty: 2 years  

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages  "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually recognizable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.   questions and answersAre the leak detection dyes also suitable for murky water? Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Massive CEE connection cable with black plastic sheath for high current connection. Suitable for use with power-intensive devices such as heating fans, construction machinery, etc. Includes coupling and plug, the ideal connection cable at a special price.

Learn more More Fewer

This end fitting made of aluminum is designed for drilling in flat roof membranes. It is equipped with a slot notch for optimal fastening. Suitable for connecting 38mm hose. Trotec Article No.: 6.100.009.053

Learn more More Fewer

This adapter allows 400V devices with CEE sockets (ideal for loads up to 9kW) to be powered from the laundry room socket. The plug and socket are connected by a short piece of PUR cable*. Protection class IP44 (splash-proof).Connector: T25/5 (male)Connector: CEE16/5 (female)  Important:The household box Type 25 is temporarily designed for max. 3 x 16A (11kW). For continuous load, e.g. for charging electric vehicles, adjust the charging current to 3 x 13A (9kW). *What is PUR?PUR is the abbreviation for polyurethane. It is resistant to, among other things, these acids:Ammonia, ASTM Oil Cat. I - III, ASTM Fuel No. I, Diethyl ether, Diethylene glycol, Glycerin, Glycol, Potassium hydroxide, Kerosene, Sodium hypochlorite solution, Sodium hydroxide max. 10%, Olive oil, Ozone, Paraffin (oil), Petroleum ether, Vegetable oils / fats, Sulfuric acid max. 30%, Silver salts max. 10%, Hydrogen peroxide max. 9%(Partial stability with other acids depending on type and concentration. All information is based on our experience and without guarantee, please ensure to consult a specialized chemist when using in the presence of acids in any case.) Technical data Cable length approx. 30cm cable cross-section 5 x 2.5 mm² Cable sheath PUR (abrasion and acid resistant) Overheating protection no Tension 380-400V Max. power / continuous load 3 x 13A Max. kW / Continuous load 9kW guarantee 2 years

Learn more More Fewer

Massive CEE connection cable with black plastic sheath for high current connection. Suitable for use with power-intensive devices such as heating fans, construction machinery, etc. Includes coupling and plug, the ideal connection cable at a special price.

Learn more More Fewer

UV lamp for detection of leak detection dye (fluorescent). (Batteries not included)HEYLO Article Number 1 800 506

Learn more More Fewer

Trotec Article No. 6.100.009.054

Learn more More Fewer

The practical cable reel from Ekström offers a comfortable and flexible power distribution with a cable length of 25 meters. Thanks to the integrated four sockets, multiple devices can be connected and operated simultaneously, making this cable reel an extremely versatile helper. The thoughtful design is complemented by a shock-absorbing base that ensures a stable and secure stand, thus providing additional safety during use.   ExecutionCable: 25 Meters | 3x 1.5 mm²Connection plug: 1x T12Socket: 4x T13Shock-absorbing and stable foot frameErgonomically shaped handle Ideal forConstruction companiesworkshopProfessional DIYersHobby activities   Technical data brand Ekstrom Material Metal frame / Aluminum drum Cable length (m) 25 Cross-section (mm²) 3 x 1.5 mm² connector plug T12 equipment 4 x T13 Overheating protection Yes Protection class IP40 Operating voltage (V) 230 Drum diameter (mm) 245 Height (mm) 340 Width (mm) 250 Depth (mm) 205 Net weight (kg) 4.5 Guarantee 24 Months

Learn more More Fewer

Polyurethane (PUR) extension cable with plug and socket380/400V 16A 5x2.5 mm² (suitable for e.g. heating fans up to max. 10 kW): Acid-resistant* extension cables made of polyurethane (PUR) with orange sheathing. The inner conductors are made of rubber-silicone for high flexibility. Suitable for use on construction sites, in industry and commerce for operating power-intensive devices such as fan heaters, construction machinery, etc. Includes coupling and plug. For high mechanical stress in dry to wet rooms and outdoors (the plug and socket must be kept dry). Lower wear under abrasion and grinding stress compared to conventional plastic or rubber sheaths.*Polyurethane is resistant to, among other things, these acids:Ammonia, ASTM Oil Cat. I - III, ASTM Fuel No. I, Diethyl ether, Diethylene glycol, Glycerin, Glycol, Potassium hydroxide, Kerosene, Sodium hypochlorite solution, Sodium hydroxide max. 10%, Olive oil, Ozone, Paraffin (oil), Petroleum ether, Vegetable oils / fats, Sulfuric acid max. 30%, Silver salts max. 10%, Hydrogen peroxide max. 9%(Partial stability with other acids depending on type and concentration. All information is based on our experience and without guarantee, please ensure to consult a specialized chemist when using in the presence of acids in any case.)  Technical data Cable: H07BQ-F 5 x 2.5 mm² with rubber insulated conductorsCoat: PolyurethaneCEE connector: 16A 5p 6h 400VCEE plug: 16A 5p 6h 400VLengths: 10m, 15m, 20m, 25m, 30m, 50m (any other lengths available on request)Weight: approx. 257g per mWarranty: 2 years Standards:DIN VDE 0282-10HD 22.10 S1+A1DIN VDE 0295 Class 5 (Conductor Construction)HD 308 S2 (Recognition Mark)EN 60332-1-2 (Flame Behavior)  

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.  

Learn more More Fewer

Massive CEE connection cable with black rubber sheath for high current connection. Suitable for use with power-intensive devices such as heating fans, construction machinery, etc. Includes coupling and plug, the ideal connection cable at a special price.

Learn more More Fewer

The tub is made of silver ABS plastic, the safety bracket is made of stainless steel 1.4301 (acid-resistant, non-corrosive 18/10 chrome-nickel steel), electropolished. Also available as a complete set with wall protection plate. 

Learn more More Fewer