Large, sturdy drying rack with plenty of space on two large and one smaller level, total cm. 22m drying rods. With a width of 162cm, it is one of the largest foldable drying racks on the market. Bargain while supplies last.The Dryfix Luxor drying rack is lightweight yet stable. It has a good stand even when loaded. It is ready to use immediately without assembly, quickly set up, and can be folded away space-savingly in no time.Material: Metal pipes, plastic connectors.warranty 2 yearsShipping costs for 1 piece Fr. 18.- (this laundry rack is sent exclusively by courier due to the package dimensions).  Technical data   width 162 cmtotal height 116 cmdepth 53 cm

Learn more More Fewer

Complete wall-to-wall laundry line system made of stainless aluminum rails for self-assembly. Affordable, stable design with Dryfix corner rails and pre-assembled sliding rollers. The screws/anchors required for assembly can be ordered free of charge. White plastic-coated wire rope and chrome cable tensioner for optimal load capacity.0.95 m wide (7 lanes) with20 m rope (line length max. 2.70 m)30 m rope (line length max. 4.10 m)40 m rope (line length max. 5.50 m)50 m rope (line length max. 7.00 m)1.15 m wide (8 lanes) with20 m rope (line length max. 2.30 m)30 m rope (line length max. 3.60 m)40 m rope (line length max. 4.85 m)50 m rope (line length max. 6.10 m)Complete wall-to-wall clothesline system for self-assembly.The set consists of:- 2 x support rails made of sturdy aluminum, perforated for wall mounting- Dryfix sliding rollers black (15 cm distance between the lines)- 1 rope tensioner- plasticized wire rope white- Order for free upon request: Dowels and screws for wall mountingTo calculate the correct rope length, you calculate (Room length x number of lanes) + (1 x rail width) + approx. 10 cm for the insertion of the rope end into the rope tensioner.The rollers are pre-assembled on the carrier rails in this package."Laundry line systems from 1m in length will be shipped by courier in any case."  Technical DataWeight Dryfix Alu complete 1.45m widewith 30m rope 2990 gr.with 40m rope 3259 gr.with 50m rope 3500 gr.  

Learn more More Fewer

Dryfix Vario Metal Laundry Line System, 15 cm Line SpacingComplete wall-to-wall laundry line system for self-assembly, can be combined with wall or ceiling brackets and expanded into a wall-to-ceiling or ceiling-to-ceiling system. Pre-assembled sliding rollers. The screws/anchors required for installation can be ordered free of charge upon request. White plastic-coated wire rope and chrome-plated cable tensioner for optimal load capacity.0.78 m wide (6 lanes) with 20 m rope (line length max. 3.20 m)30 m rope (line length max. 4.80 m)40 m rope (line length max. 6.50 m)50 m rope (line length max. 8.20 m)1.08 m wide (8 lanes) with 20 m rope (line length max. 2.35 m)30 m rope (line length max. 3.60 m)40 m rope (line length max. 4.85 m)50 m rope (line length max. 6.10 m)1.23 m wide (9 lanes) with20 m rope (line length max. 2.05 m)30 m rope (line length max. 3.15 m)40 m rope (line length max. 4.25 m)50 m rope (line length max. 5.35 m)  1.53 m wide (11 lanes) with 30 m rope (line length max. 2.55 m)40 m rope (line length max. 3.45 m)50 m rope (line length max. 4.35 m)70 m rope (line length max. 6.20 m)1.83 m wide (13 lanes) with 30 m rope (line length max. 2.15 m)40 m rope (line length max. 2.90 m)50 m rope (line length max. 3.65 m)70 m rope (line length max. 5.20 m)2.28 m wide (16 lanes) with30 m rope (line length max. 1.70 m)40 m rope (line length max. 2.35 m)50 m rope (line length max. 2.95 m)70 m rope (line length max. 4.20 m) "Can be combined with all wall or ceiling supports from Dryfix, Krüger, Lübra. For rail lengths up to 1.53m, two supports per side are sufficient; above that, we recommend 3 supports per side due to the strong cable tension." The set consists of:- 2 x connection rails made of sturdy metal (4mm thick), perforated for wall mounting- Dryfix sliding rollers (15 cm distance between the lines), color selectable: black, yellow, blue- 1 rope tensioner- plasticized wire rope white- on request: free dowels and screws for wall mountingTo calculate the correct rope length, you calculate(Room length x number of lanes) + (1 x rail width) + approx. 10 cm for the insertion of the rope end into the rope tensioner.The rollers are pre-assembled on the carrier rails in this package.Option Montage: If you would like to have the system professionally installed at your location, please request a quote (depending on distance and possibly other items to be installed).Shipping costs for 1 set Fr. 14.- (we only ship this laundry rack via courier due to the package dimensions). Technical data Dryfix Vario Metal complete  0.78m with 20m rope: 6793g with 30m rope: 7013g with 40m rope: 7282gwith 50m rope: 7523g 1.08m with 20m rope: 8019gwith 30m rope: 8239g with 40m rope: 8508g with 50m rope: 8749g with 70m rope: 9257g 1.53m with 30m rope: 11579g with 40m rope: 11848g with 50m rope: 12089gwith 70m rope: 12597g 2.28m with 30m rope: 14093g with 40m rope: 14362g with 50m rope: 14603g with 70m rope: 15111g

Learn more More Fewer

Complete laundry line system for self-assembly with sturdy T-telescopes made of stainless metal. Ideal as a secondary hanging solution or wherever a wall-to-wall solution is not possible due to spatial reasons. This system requires a stable, non-insulated supporting wall, ideally made of concrete or masonry. The supports extend 60 cm into the room and have space for 5 lines.White plasticized wire rope and chrome-plated cable tensioner for optimal load capacity.The set consists of• 2 x T-beams made of sturdy metal, length 60 m. The first line is 14.2 cm away from the wall, then 10 cm distance.• 10 sliding rollers Dryfix, color selectable black, yellow, blue• 1 rope tensioner• plasticized wire rope white 10m• Dowels and screws for wall mountingThe rollers are pre-assembled on the carrier rails in this package.Ideal mounting heightAs a junior line (additional hang) at a comfortable working height (approx. 1m), or as a main hang at approx. 1.85m height.

Learn more More Fewer

Complete laundry line system for self-assembly with sturdy T-telescopes made of stainless metal. Ideal as a secondary hanging solution or wherever a wall-to-wall solution is not possible due to space constraints. This system requires a stable, non-insulated supporting wall, ideally made of concrete or masonry. White plastic-coated wire rope and chrome-plated cable tensioner for optimal load capacity.1 m (8 lanes) with20 m rope - for a width of max. 2.36 m The set consists of- 2 x T-beams made of sturdy metal with a widened mounting plate for ideal stability, length 1 m. The first line is 10 cm away from the wall, then 12.5 cm distance.- 16 sliding rollers Dryfix, color selectable black, yellow, blue- 1 rope tensioner- plasticized wire rope white- 4 dowels and screws for wall mountingThe rollers are pre-assembled on the carrier rails in this package.Ideal mounting heightas main hangs approx. 1.85-1.95m (to avoid injuries, install above head height), or as wide secondary hangs also popular at hip height.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.  

Learn more More Fewer

The 408 is the ideal solution for households looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of two to three loads of laundry per day, making it perfectly suited to the needs of smaller households. Please note that the model offered here does not have a switchable heating function. As the successor to the proven "Bora 208", the 408 continues to impress with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 408 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 408 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 15 - 18 m² Drying performance: 1.45 - 1.89 kg/h depending on fan speed Consumption per kg of laundry:   0.25 - 0.31 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.41 kW with heating switched on ("H" models): 1.41 kW Sound pressure level: Fan level 1: 45 dB(A) Fan level 3: 66 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 38 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 410 is the ideal solution for family households with children looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of three to four loads of laundry per day, making it perfectly suited to the needs of larger families. Please note that the model offered here does not have a switchable heating function. As the successor to the proven "Bora 210", the 410 impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 410 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 410 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with a heater only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 25 m² Drying performance: 1.75 - 2.50 kg/h depending on fan speed Consumption per kg of laundry:   0.22 - 0.28 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.43 kW with heating switched on ("H" models): 1.43 kW Sound pressure level: Fan level 1: 46 dB(A) Fan level 3: 67 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 40 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 408H is the ideal solution for households looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of two to three loads of laundry per day, making it perfectly suited to the needs of smaller households. Unlike the model 408, the 408H features an optional heating function that further accelerates the drying process when needed. As the successor to the proven "Bora 208H", the 408H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 408H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 15 - 18 m² Drying performance: 1.45 - 1.89 kg/h depending on fan speed Consumption per kg of laundry:   0.25 - 0.31 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.41 kW with heating switched on ("H" models): 1.41 kW Sound pressure level: Fan level 1: 45 dB(A) Fan level 3: 66 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 38 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 410H is the ideal solution for family households with children looking for a gentle and energy-efficient alternative to the tumble dryer. It effortlessly handles the drying process of three to four loads of laundry per day, making it perfectly suited to the needs of larger families. The model offered here features an optional heating function that further accelerates the drying process when needed. As the successor to the proven "Bora 210H", the 410H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. In addition, the 410H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. Especially in drying rooms with only a small amount of laundry or with garments of varying thickness, this follow-up check can optimize the drying result. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It spreads relatively wide, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released to the room air more quickly and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 25 m² Drying performance: 1.75 - 2.50 kg/h depending on fan speed Consumption per kg of laundry:   0.22 - 0.28 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.43 kW with heating switched on ("H" models): 1.43 kW Sound pressure level: Fan level 1: 46 dB(A) Fan level 3: 67 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 70.5 x 45 x 33.5 cm Weight: 40 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The new Secomat2 from Krüger impresses with its intuitive operation and its award-winning design, which has been honored with the prestigious "Reddot" award. As the most compact version of the series, the Secomat2 offers a significantly higher drying performance than its predecessor, the Secomat75. It effortlessly handles the drying process of about two loads of laundry per day. The Secomat2 is available in elegant anthracite as well as exclusively from us in stylish azure blue.   Operation   The basic idea of the new generation is that the dryer only needs to be turned on once. After that, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate.   Wi-Fi and app   "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house."     Sensors Like most dehumidifiers on the market, the new Secomat devices are also equipped with moisture sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out the residual moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.     Airway and filter   The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.     Water drainage   The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways.     Montage   The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.     Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: blue (RAL 5009)     Technical data  Kruger article: 396.03 Drying room: min. 6 m² up to max. 12 m² Drying performance: 2.13 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 64 dB(A) (Manufacturer's specification with 7.5kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The new Secomat2 from Krüger impresses with its intuitive operation and its award-winning design, which has been honored with the prestigious "Reddot" award. As the most compact version of the series, the Secomat2 offers significantly higher drying performance than its predecessor, the Secomat75. It effortlessly handles the drying process of about two loads of laundry per day. The Secomat2 is available in elegant anthracite as well as exclusively from us in stylish azure blue.   Operation   The basic idea of the new generation is that the dryer only needs to be turned on once. After that, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate.   Wi-Fi and app   "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house."     Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with moisture sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased the drier the laundry becomes. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.     Airway and filter   The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.     Water drainage   The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways.     Montage   The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.     Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: anthracite (RAL 7016)     Technical data  Kruger article: 396.01 Drying room: min. 6 m² up to max. 12 m² Drying performance: 2.13 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 64 dB(A) (Manufacturer's specification with 7.5kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The 415 is a reliable and efficient tumble dryer specifically designed for multi-family homes with up to six units. With a drying time of just four hours for two washing machine loads, depending on the selected fan speed, it effortlessly meets the demands of high-traffic drying rooms. Please note that this model does not have an adjustable heating function. With an energy consumption of only 0.18 kWh per kilogram of laundry, the 415 is the most energy-efficient model in the new Bora series. As the successor to the proven "Bora 315", the 415 impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 415 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 415 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C in the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 30 m² Drying performance: 2.74 - 4.06 kg/h depending on fan speed Consumption per kg of laundry:   0.18 - 0.24 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.69 kW with heating switched on ("H" models): 1.69 kW Sound pressure level: Fan level 1: 53 dB(A) Fan level 3: 68 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 62 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The 415H is a powerful and reliable dryer specifically designed for multi-family homes with up to six units. With a drying time of just four hours for two loads of laundry, depending on the selected fan speed, it effortlessly meets the demands of high-traffic drying rooms. The model offered here features an adjustable heating function that further accelerates the drying process if needed. With an energy consumption of only 0.18 kWh per kilogram of laundry, the 415H is the most energy-efficient model in the new Bora series. As the successor to the proven "Bora 315H", the 415H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 415H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. Especially in drying rooms with only a small amount of laundry or with garments of varying thickness, this follow-up check can optimize the drying result. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This humidity level can also be adjusted as desired. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It disperses relatively widely, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 30 m² Drying performance: 2.74 - 4.06 kg/h depending on fan speed Consumption per kg of laundry:   0.18 - 0.24 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.69 kW with heating switched on ("H" models): 1.69 kW Sound pressure level: Fan level 1: 53 dB(A) Fan level 3: 68 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 62 Kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

What can be found in almost every household in the far north is hardly known in our region. The drying cabinet is space-saving and dries clothes, shoes, gloves, etc. quickly and gently. The capacity corresponds to approximately a 16m long clothesline or about 5 kg of laundry.The door hinge on this model is on the left and the handle is accordingly on the right.Gentle dryingUnlike a conventional tumbler, cabinet dryers do not cause wear and tear on textiles. The Ecodryer 2.0 is built on the latest heat pump technology, making it energy-efficient. A stream of warm air is regularly distributed inside the cabinet from the back wall through dozens of exhaust holes, ensuring that the laundry dries evenly. The maximum internal temperature is 55°C, allowing even more delicate garments to be dried.drying processThe drying process itself is quite simple: at the push of a button, you can choose between damp ironing and cupboard dry. The preset recommended values can be changed at any time to personal preferences. When the laundry is dry, the device switches off. The operating noise of the drying cabinet is only 52 dB(A) (comparable to a range hood), making it significantly quieter than room air dryers. It is therefore also suitable for use in apartments and noise-sensitive basement environments. The operating language can be selected according to personal preference. In addition to the Nordic languages, operation is also available in German, French, and English by default.The interior inventory of the cabinet dryer consists of 3 pull-out fork sliders, each with 10 rods, which can be directly hung with laundry or hangers. When longer garments are hung on the hanger, the two lower shelves can simply be folded up, so that half or the entire interior height remains free. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate.The extracted water is drained similarly to a dehumidifier or Secomat. It can either be collected in a simply removable 2-liter bucket or drained directly through a hose connection. This ensures that hardly any moisture enters the room air. An integrated pump also allows for drainage into higher drainage lines up to about 1.2m from the floor. The bucket is equipped with a float that automatically interrupts operation when full.Economical operationThe "Ecodryer" drying cabinets differ from previous models in that they are not based on energy-intensive resistance heating, but on an economical heat pump principle. This reduces operating costs compared to earlier models by 70%. Only the waste heat from the compressor is used to heat the interior of the cabinet. A thermostat monitors the interior temperature. If it rises above 55°C, a second fan is activated, which immediately regulates the interior temperature as needed. With this technology, consumption has been reduced to 0.28 kWh per kg of laundry. A drying process takes approximately 1.5-3 hours, depending on the load and moisture content of the laundry.maintenanceUnder the easily removable floor plate lies the air filter, which must be cleaned regularly. Otherwise, the device is maintenance-free. Also very well thought out is the handling in the unlikely event of a technical problem: the entire technology is inserted under the floor plate as a cassette and can be pulled out for repair work or replacement without having to move or transport the cabinet itself.You can exclusively obtain the Ecodryer 2.0 in Switzerland from us. It is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux.  Technical data  dimensions HxWxD  Bandung door 1925 x 595 x 675 mmThe door is optionally fixed on the left or right. Weight 94 kg Protection class IP24, CE certified capacity 16m drying rodsNormal filling quantity approx. 4-5 kg, max. approx. 8 kg operating noise 52dB(A) power connection Swiss plug, 220 V 10A, max. 900W dehumidification performance up to 1.5 liters per hour, 36 liters per day Power consumption approx. 0.28 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German

Learn more More Fewer

What can be found in almost every household in the far north is hardly known in our region. The drying cabinet is space-saving and dries clothes, shoes, gloves, etc. quickly and gently. The capacity corresponds to approximately a 16m long clothesline or about 5 kg of laundry. The door hinge on this model is on the right and the handle is accordingly on the left.Gentle dryingUnlike a conventional tumbler, cabinet dryers do not cause wear and tear on textiles. The Ecodryer 2.0 is built on the latest heat pump technology, making it energy-efficient. A stream of warm air is regularly distributed inside the cabinet from the back wall through dozens of exhaust holes, ensuring that the laundry dries evenly. The maximum internal temperature is 55°C, allowing even more delicate garments to be dried.drying processThe drying process itself is quite simple: at the push of a button, you can choose between damp ironing and cupboard dry. The preset recommended values can be changed at any time to personal preferences. When the laundry is dry, the device switches off. The operating noise of the drying cabinet is only 52 dB(A) (comparable to a range hood), making it significantly quieter than room air dryers. It is therefore also suitable for use in apartments and noise-sensitive basement environments. The operating language can be selected according to personal preference. In addition to the Nordic languages, operation is also available in German, French, and English by default.The interior inventory of the cabinet dryer consists of 3 pull-out fork sliders, each with 10 rods, which can be directly hung with laundry or hangers. When longer garments are hung on the hanger, the two lower shelves can simply be folded up, so that half or the entire interior height remains free. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate.The extracted water is drained similarly to a dehumidifier or Secomat. It can either be collected in a simply removable 2-liter bucket or drained directly through a hose connection. This ensures that hardly any moisture enters the room air. An integrated pump also allows for drainage into higher drainage lines up to about 1.2m from the floor. The bucket is equipped with a float that automatically interrupts operation when full.Economical operationThe "Ecodryer" drying cabinets differ from previous models in that they are not based on energy-intensive resistance heating, but on an economical heat pump principle. This reduces operating costs compared to earlier models by 70%. Only the waste heat from the compressor is used to heat the interior of the cabinet. A thermostat monitors the interior temperature. If it rises above 55°C, a second fan is activated, which immediately regulates the interior temperature as needed. With this technology, consumption has been reduced to 0.28 kWh per kg of laundry. A drying process takes approximately 1.5-3 hours, depending on the load and moisture content of the laundry.maintenanceUnder the easily removable floor plate lies the air filter, which must be cleaned regularly. Otherwise, the device is maintenance-free. Also very well thought out is the handling in the unlikely event of a technical problem: the entire technology is inserted under the floor plate as a cassette and can be pulled out for repair work or replacement without having to move or transport the cabinet itself.You can exclusively obtain the Ecodryer 2.0 in Switzerland from us. It is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux.  Technical data  dimensions HxWxD  Bandung door 1925 x 595 x 675 mmThe door is optionally fixed on the left or right. Weight 94 kg Protection class IP24, CE certified capacity 16m drying rodsNormal filling quantity approx. 4-5 kg, max. approx. 8 kg operating noise 52dB(A) power connection Swiss plug, 220 V 10A, max. 900W dehumidification performance up to 1.5 liters per hour, 36 liters per day Power consumption approx. 0.28 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German

Learn more More Fewer

The 420 is the most powerful dryer in the Bora series and has been specifically designed for intensive use in multi-family homes. With a drying time of just over three hours for two washing machine loads, depending on the selected fan speed, it is ideal for high-traffic drying rooms. Please note that this model does not have an adjustable heating function. As the successor to the proven "Bora 320", the 420 impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be regulated in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 420 features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.  Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. Especially in drying rooms with only a small amount of laundry or with garments of varying thickness, this follow-up check can optimize the drying result. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):For a small additional charge, the device is also available as "Bora 420 H". The switchable 1000 W heater accelerates the drying of laundry in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with a heater only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It spreads relatively wide, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. The optimal mounting height of the Boras should therefore be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 35 m² Drying performance: 3.00 - 4.74 kg/h depending on fan speed Consumption per kg of laundry:   0.21 - 0.27 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.75 kW with heating switched on ("H" models): 1.75 kW Sound pressure level: Fan level 1: 54 dB(A) Fan level 3: 69 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 64 kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The Lübra SecoTec 1700 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1450m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. execution- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).  mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data Country of production Switzerland energy efficiency class A1 Power consumption 870 Watt supply voltage 230 V Dry performance at 15kg 2.93 kg/h consumption 0.30 kWh / kg laundry noise level (our measurement) 65 dB(A) at a distance of 2.5m 68 dB(A) at 1m distance air circulation 1450m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 44 kg Refrigerant (CFC-free) R410a guarantee 3 years  

Learn more More Fewer

The 420H is the most powerful dryer in the Bora series and has been specifically designed for intensive use in multi-family homes. With a drying time of just over three hours for two washing machine loads, depending on the selected fan speed, it is ideal for high-traffic drying rooms. The model offered here features an adjustable heating function that further accelerates the drying process if needed. As the successor to the proven "Bora 520H", the 420H impresses with its modern design and compact dimensions, which are identical to its predecessor. However, it has been extensively revised and brought up to date technically. The new, environmentally friendly refrigerant "R32" ensures improved energy efficiency. The ventilation can now be adjusted in three stages, significantly reducing the noise level at the lower fan settings. Additionally, the 420H features a user-friendly touchscreen control and the option for Wi-Fi connectivity, allowing for comfortable control and monitoring.   Operation The Bora features a clear, digital touchscreen control panel that can be set to various languages (German, French, Italian, English). Drying programs:By pressing a button, the drying program can be started. The dehumidifier runs until the laundry is dry and then automatically switches off. The pre-programmed target humidity value of 40% is suitable in most cases, but can otherwise be increased or decreased to any humidity value according to personal preference. Logically, the device operates until it can assume that the laundry is dry. Then it switches off. After a few minutes, it measures again with 1-3 control cycles using pure recirculated air to check whether the humidity value has increased too much, indicating that the laundry may not be completely dry yet. If so, the Bora dries again; if not, it goes into standby. This follow-up check can optimize the drying result, especially in drying rooms with only a small amount of laundry or with garments of varying thickness. Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume. Specifically at Bora: The start time can be postponed if, for example, you only want to dry at the low tariff. There are also blocking times possible, during which the device never runs. Furthermore, there is the option for the dryer to automatically switch to room monitoring mode after the laundry drying is completed. Supplementary heating ("H" models):The switchable 1000 W heater accelerates laundry drying in the cold season because warm air can hold more moisture than cold air. When the heater is switched on, it heats until a room temperature of 18°C is reached. Above 18°C, the heater is inactive, even if it is switched on. Therefore, the version with heating only provides an advantage in rooms that fall below 18°C during the cold season.  Blower and fan stages:The blower is a radial blower, which is placed in the upper area of the housing. It spreads relatively wide, but loses power in depth (in long drying rooms). The Bora is therefore particularly suitable for shorter to medium laundry hanging of up to about 5 m in length, which can certainly have a width of 2 m. The warm air stream should blow through the laundry below the clotheslines, so that it can sway in the wind. This causes the moisture to be released more quickly into the room air and can be captured by the dryer. Therefore, the optimal mounting height of the Boras should be slightly below the lines, which usually means about 1.70 m from the top edge of the device.Selectable fan speeds: Silent = Gentle / Quiet, consumption and drying time increase slightly. ECO = Consumption and drying speed are within the average range of the specified performance data. Fast = High air throughput for quick, efficient drying. The operating noise is clearly noticeable. Air louvers: The front of the housing is fixed, meaning the direction of the airflow or the dispersion cannot be changed. Direct hose connection:The water drained from the laundry flows out through a hose connection at the bottom of the housing. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets for all Bora models in our range if needed.Air filter:The humid room air is drawn in at the lower part of the front. An industrial, durable filter mat is inserted in a fold-out door at the bottom. It cleans the air of coarse dust and lint, keeping the inside of the device clean. Should the material of the filter ever become exhausted, suitable replacement filter mats can be ordered from us at any time. With the new model, the hold and opening of the door have also been improved with magnets.   WLAN: The WLAN connection allows you to display the BORA status via a browser on your smartphone, tablet, or PC. In addition, the WLAN connection enables you to access software updates. Of course, the operation can also be carried out as usual directly on the device without WLAN. Compact dimensions:The Bora is comparatively narrow and often fits into places in the drying room where other devices are too wide, for example between downpipes or electrical lines. Since all operation is done from the front, the Bora does not require any space on the sides or above.   Swiss Control: "Its comfort control was designed by Roth-Kippe and is manufactured in Switzerland."    Funny gadget: "Anyone who does not want to get used to the new operator panel can switch to the familiar design at the push of a button. The operator panel on the display then looks practically identical to the push buttons of the predecessor model." Ambient temperatureTechnically, the "Bora" dryers can be used down to 8°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.     Scope of delivery and wall mounting  The assembly is very simple, as with all tumble dryers:A support rail is fixed to the wall with 3 screws, and the Bora can then be easily hung. All necessary mounting materials are already included in the delivery:• the ready-to-plug-in device• Carrier rail with screws/anchors• Hose connection coupling• 2 m condensate drain hose• Operating instructions   "An optional suitable inlet pipe with bucket is available if the water cannot be directly drained into a drain." Both the support rail and the two buffers supporting the wall in the lower area of the device are insulated with rubber to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Assembly service on request   "Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request." Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman by you, if not already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If no chassis is available, we recommend the suitable chassis from Roth-Kippe."  Technical data  Drying room: up to 35 m² Drying performance: 3.00 - 4.74 kg/h depending on fan speed Consumption per kg of laundry:   0.21 - 0.27 kWh depending on fan speed Energy efficiency: A Tension: 230V / 50Hz Power consumption: in normal operation in "ECO" mode 0.75 kW with heating switched on ("H" models): 1.75 kW Sound pressure level: Fan level 1: 54 dB(A) Fan level 3: 69 dB(A)(Manufacturer's specification at a distance of 3 m) Air circulation volume: that Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R32 (GWP 675) Dimensions (H/W/D): 77 x 70 x 38.5 cm Weight: 64 kg Business closure: Touchscreen Ambient temperature: 8°C ~ 30°C (ideal: 15°C or warmer) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years                                                 Training video for assembly:     

Learn more More Fewer

The new "Secomat4" from Krüger impresses with very simple operation and thoughtful functionality. The design has been modernized and even awarded the "Reddot" award. The device is suitable for single-family homes with increased drying frequency or multi-family homes with low drying needs. It achieves a drying performance of about 3 washing machine loads per day. Available in anthracite, and additionally in azure blue with us.  service The basic idea of the new generation is that the dryer only needs to be turned on once. Subsequently, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:• Only dry laundry: The drying process continues until the laundry is dry. If there is no laundry or if it is dry, the device pauses.• Drying laundry and room monitoring: If laundry is hung, it will be dried. If the laundry is dry or no laundry is hung, the Secomat switches to general room monitoring. The humidity in the room is kept just below the threshold of 60% relative humidity to prevent odors and mold formation.• Only room monitoring: the device can also be used solely as a room dehumidifier, without drying laundry. The humidity in the room is kept just below the threshold of 60% relative humidity to prevent odors and mold formation.  Wi-Fi and app "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their mobile phone. For this, the device must be within the range of a WLAN in the house."  Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with humidity sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can differentiate whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.  airway and filter The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.  water drainage The drained water is discharged through a hose connection. The connection is located in the bottom of the device near the wall, so that the water runs almost vertically through a hose into a siphon mounted below. With an angle coupling, the water can also be diverted sideways.  Assembly The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.   Features at a glance• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: anthracite (RAL 7016)   Technical data  Krüger article: 397.01 drying room: min. 6 m² up to max. 16 m² Drying performance: 2.81 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: TO Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 70 dB(A) (Manufacturer's specification for 10kg laundry in the room) Examples of dehumidification performance and consumption: n/a air circulation volume: n/a condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes hose connection: Yes Guarantee: 3 years    Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The new Secomat4 from Krüger impresses with its intuitive operation and well-thought-out functionality. Its modern design, which has been awarded the prestigious "Reddot" award, makes it a real eye-catcher. Designed for single-family homes with higher drying needs or multi-family homes with lower needs, it offers a drying capacity of about three washing machine loads per day. Available in elegant anthracite and exclusively with us also in stylish azure blue.Operation The operation of the Secomat4 is incredibly simple: Once switched on, the advanced software in combination with various sensors takes over the fully automatic operation. At the push of a button, you can choose between three operating modes: Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate.   Wi-Fi and app   "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house."     Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with humidity sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.     Airway and filter   The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.     Water drainage   The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways.     Montage   The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.     Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: blue (RAL 5009)     Technical data  Kruger article: 397.03 Drying room: min. 6 m² up to max. 16 m² Drying performance: 2.81 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 70 dB(A) (Manufacturer's specification for 10kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The professional, large drying cabinet for intensive use. It is built to a very high standard and is ideal for large drying quantities. For example, for the quick drying of work clothes, firefighting gear, laundry in the gastronomy and hotel sector, but also in private households that appreciate the comfort of faster laundry drying. The capacity is approximately 6 kg of laundry and dries it in about one hour. This corresponds to roughly one washing machine load per hour.Unlike a conventional tumble dryer, cabinet dryers do not cause wear and tear on textiles. The laundry is gently permeated by a stream of air and dries similarly to how it would outside in the garden. The dry air is distributed laterally through several exhaust openings inside the cabinet, ensuring that the laundry dries evenly.The humid air condenses on a cooling element (similar to a dehumidifier or Secomat) and is discharged through a hose. The dehumidification element is located in the upper part of the cabinet, so that the extracted water can be easily directed to a lower drain or a sink. The included hose is 3m long. Due to its high dehumidification power, the FT120VP does not have a condensate tank, unlike the smaller version "Ecodryer 2.0."The drying process takes place autonomously inside the cabinet. A supply of fresh air is not required. This also means that no moisture is released into the room air, which is particularly advantageous in cooler basements (no odor and mold formation due to excessive room humidity).The operation itself is remarkably simple: with the press of a button, you can choose between damp and cupboard dry. The preset, recommended values can be changed at any time to personal preferences. When the laundry is dry, the device turns off. The operating noise is noticeable at 55 dB(A), but in a lockable room, it is not further disturbing. The control panel is available in various languages, including German, French, English, and the Nordic languages.The interior inventory of the wardrobe dryer consists of 4 swing-out forks, each with 5 rods, which can be directly hung with laundry or hangers. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate. If the wardrobe is used exclusively for drying jackets and coats, the lower three holders can theoretically be cut off, so that only the top holder can be hung with hangers.Newest generation!The drying cabinets differ from earlier models in that they do not rely on conventional resistance heating, but rather on the latest heat pump principle. This reduces operating costs compared to earlier models by 50% or more. Only the waste heat from the compressor is used for the internal temperature regulation of the cabinet. With this technology, consumption has been reduced to 0.35 kWh per kg of laundry. A drying process takes about 1 hour, depending on the load and moisture content of the laundry.Maintenance Drying CabinetAbove the laundry is the air filter, which keeps the air inside the cabinet clean during drying. This filter is inserted and can be easily removed for cleaning. It consists of a frame and a filter mesh with high cleaning efficiency. The filter is reusable.   power connectionThe drying cabinet is delivered as standard without a power cable. It operates on high voltage (400V / 3 phases / 2300W) and should be professionally connected directly by an electrician or equipped with a suitable cable/plug. The Ecodryer is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux, among others. It is produced to order and imported, with a delivery time of approximately 4-5 weeks. It is delivered in two parts or on two pallets.At our AIRCENTER in Baden, you can view the cabinet in the exhibition and get advice if you have any questions.  Technical data  Dimensions H x W x D    2059 x 1195 x 658 mm  Weight 189 kg Protection class IPX4, CE certified refrigerant R407C / 925g capacity 18m drying rodsNormal filling quantity approx. 6-8 kg operating noise 55dB(A) power connection 400V 3N AC 50Hz, 10A slow Recording 2300W topping performance approx. 6 kg laundry per hour Power consumption approx. 0.35 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German  User manual English

Learn more More Fewer