These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether living area, conservatory, or bathroom, as a supplementary heating solution, the infrared flat heater creates warmth directly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 450W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.43 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 2 A Power consumption max. 0.45 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 705 x 605 x 22 mm (without stand feet) Weight 4 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.010 Guarantee 2 years

Learn more More Fewer

These infrared panels are ideal for equipping previously unheated rooms with an effective heating source or for generating localized warmth, such as at the workplace, by the sofa, or in the bathroom. The gentle heat waves are absorbed by solid materials like furniture or walls, as well as by people, providing a pleasant warmth. It is very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. "While traditional heating devices need to heat the entire room volume, heating plates can specifically heat desired areas. This saves a lot of energy and thus also costs."  application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for spot heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.  Advantages at a Glance • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell• no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (matching stand feet are available from us as accessories)• Immediately usable - no additional installations or expensive renovations required You can find the ErP table for this heating device above in the "Documents" section.      Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of the room in m² x W/m² = required heating power in Watts.  Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   heating capacity 580W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 Voltage 220 - 240 V/50 Hz rated current consumption max. 2.6 A Power consumption max. 0.58 kW housing Aluminum Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without stand feet) Weight 5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.012 guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether at the workplace, in the living area, or in the bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides warmth directly where it is needed by the residents as a supplementary heating solution. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 700W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.72 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.2 A Power consumption max. 0.70 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without stand feet) Weight 6 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.014 Guarantee 2 years

Learn more More Fewer

This infrared heating panel / heating wall generates a very energy-saving heating thanks to the latest technology. It can be used freestanding or mounted on a wall or ceiling. Infrared heating panels produce a pleasant thermal wave energy (deep heat), which is predominantly absorbed by the walls and objects in the room. Only a fraction (about 15%) of it is not absorbed and is reflected back. The thermal wave energy absorbed by ceilings, walls, floors, and objects is then released back to the environment in the form of heating energy, creating a pleasant warm climate with extremely low electricity consumption compared to conventional heating methods.This infrared heater is available in two different strengths: with 350W or 900W heating power (please note the corresponding offer in our shop). Unlike conventional heaters or fan heaters, infrared heaters can provide heat to specific areas without having to warm the rest of the room. For example, for heating a workspace, the seating area in the living room, etc. The heat becomes noticeable after just a few minutes. This infrared heating panel is also ideal for drying damp or wet walls, ceilings, or objects, as the heat exerts its effect about 85% directly in the wall, ceiling, or object, without prior convection loss, and thus the moisture is expelled much faster than by other methods.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. WDH® air conditioning units have established an excellent reputation for high-quality devices in recent years. Quality standards include, for example: durability, compliance with the specified performance, of course with CE conformity, recyclable materials, etc. We are the general representative for WDH devices in Switzerland and usually keep the products in stock.With us, you receive a branded product and, of course, comprehensive customer support, even after the warranty period has expired.Properties & Advantages:? High-performance IR heating plate with at least 350 watts? High-quality stainless steel heating plate with aluminum frame? Two aluminum feet (for freestanding) as well as a mounting set (for wall mounting) are included in the delivery.? Heat transfer without air movement and without any oxygen consumption? Absolutely silent operation? Very low consumption costs compared to other heating forms? Automatic Overheat Protection? Service promise/Pick-up guarantee: In the unlikely event of a complaint, the device will be picked up from you by UPS and checked/repaired in our own workshop.? No maintenance required and easy to clean (just wipe it down).? Very slim design and lightweight construction. Furthermore, very appealing exterior.? High mobility (Plug & Play) and super easy quick assembly.Miscellaneous:- This infrared heating plate is passively controlled. This means, simply plug it into the socket and the heating plate operates independently. This means, the heater is either on or off. Temperature or time control is not possible or would need to be supplemented with a separate timer or temperature controller if necessary.The heating plate of the device can become as hot as 125° C in extreme cases; however, the automatically controlled heating plate temperature averages between 80 – 105 °C. It is advisable to ensure that small children or animals cannot come into contact with the heating plate.Examples of use:Room heating: Ideal for supportive and energy-saving room heating. For rooms up to 8 m2, it is often sufficient as the only heat source.Drying: Ideal for faster drying of walls, ceilings, floors, and objects. Economic heating/drying of basement rooms.Damage removal: After flooding or after damage caused by extinguishing water. These devices are ideally suited to support the drying process.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart)(akd) Technical dataVoltage: 230V / 50HzPower consumption: max. 475WWavelength: 8 – 15 µm = medium infrared, IR-C wavesDimensions without feet (H/W/D): 60 x 60 x 3 cmWeight: 3.8 KgOperational Shutdown: Passive Control(i.e. Plugged in is ON, unplugged is OFF)Application area: up to max. 8m²Swiss plug: YesWarranty: 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 1100W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 1.09 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 4.8 A Power consumption max. 1.1 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without stand feet) Weight 9 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.018 Guarantee 2 years

Learn more More Fewer