The Dryfix DHP25 dehumidifier is one of the first dehumidifiers in its class to use pioneering components. The new refrigerant R290 used has a GWP of only 3 (global warming potential), whereas previous devices burden the environment with a GWP of around 2000 and higher! Additionally, a high-quality, energy-efficient EC fan has been installed as standard.    The DHP25 is not only appealing from an ecological standpoint, but also due to its robust construction, thanks to a professional interior combined with a strong design exterior. The metal housing in stainless steel look fits into private environments, but also withstands rough construction sites and drying tasks in the event of water damage. The perfect all-rounder.Operation and FunctionsThe operation is carried out via a simply designed control panel at the top of the device. By pressing a button, the target humidity can be set to either 40%, 50%, or 60%; continuous operation is also possible. The dryer operates whenever the measured room humidity is higher than the selected value. It pauses (the ventilation also stops) when the room humidity is lower than or equal to the setting.   Tank: The condensate tank has a capacity of approximately 5.5 L and features a float that magnetically interrupts operation when full. A hose for direct drainage of the condensate can also be connected. Additionally, the DHP25 comes standard with a pump connection, to which the appropriate pump (available as an accessory) can be directly connected.Airway: The air intake is at the back, the air outlet is at the front of the housing. A filter in the intake area protects the interior of the device from contamination.Memory function: The dryer is suitable for unattended continuous operation and automatically resumes operation with unchanged settings after a power interruption. It is therefore also suitable for operation with a timer.areas of applicationThe DHP25 is suitable• as a construction dryer• Dehumidifiers for commercial and industrial use, civil protection, water supply, etc.• for dehumidifying basements and in case of water damage• for faster drying of laundrydehumidification performanceThe dryer can be used from +5°C to +32°C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) ambient conditions:32° C / 80 % r.H. 25 Liters / 24h (Power consumption: 0.571 kW = 0.543 kWh per liter)20° C / 60 % r.H.  12 Liters / 24h (Power consumption: 0.427 kW = 0.855 kWh per liter)10° C / 60 % r.H.  5 Liters / 24h (Power consumption: 0.360 kW = 1.731 kWh per liter)   Technical data  Tension: 230V / 50Hz Power consumption:  max. 571 W (427 W at 20°C/60% r.H.) Sound pressure level:  1 m distance 52 dB(A) (our measurement) 2.5 m distance 49 dB(A) (our measurement) Dehumidification capacity: 22.5 liters/day (30°C / 80% r.H.)  condensate tank: Approx. 5.5 Liters   Compressor:     Rotary compressor  refrigerant:   R290 Dimensions (H/W/D):      555 x 325 x 355 mm (incl. wheels) Weight:    24 Kg Ventilator: Energy-saving EC axial fan 31W, 518 m³/h air volume Business closure: Digital  Ambient temperature: 5°C ~ 32°C  Application area: up to approx. 60m² Swiss plug:  approx. 3m cable with Swiss plug  hose connection:  Yes Operating hour meter: no Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

The dehumidifier "105S" fills a gap between inexpensive household dehumidifiers and professional construction dryers. This device is a Trotec in-house development that incorporates many customer needs. It is manufactured in Germany and is very attractive in terms of what you pay and what you receive. The version offered here, "105SHC", is the extended variant with a built-in hour meter for optimal control of operation and consumption.     Robust but lightweight   The housing is made of robust aluminum. Aluminum has the advantage of being durable, yet it remains lightweight at only 14.5 kg, which makes carrying the device easier. The dryer stands solidly on four feet.     Easy handling   The simply designed control panel allows the current room humidity and temperature to be read on one hand, while the desired target humidity can be selected at the push of a button on the other. The integrated hygrostat stores the value and automatically regulates the performance of the compressor and two-stage blower in an optimized manner. Due to the advanced software, the dryer operates more precisely and efficiently than other devices with comparable dehumidification power. Continuous operation is also possible upon request.   Timer Function: If you want to limit the operation to specific times, you can do this with the built-in timer. If the dryer is to operate at the same times every day, it can also be connected to an external timer. Thanks to the memory function, the dehumidifier remembers the last setting and resumes operation after a power interruption with the unchanged setting (for example, when you only want to dehumidify during off-peak hours).      Bucket with float and direct hose connection   The condensate drawn from the air is collected in the inserted bucket as standard. This has a comfortable capacity of 5.2 liters. A float automatically interrupts operation when the bucket is full. Alternatively, a hose can also be connected to drain the water directly into a lower-lying outlet. The hose must be laid with a downward slope, as no pump is integrated into the device.     Easy to clean air filter   To prevent excessive contamination of the device interior, a filter cleans the air at the intake area. This filter is easy to remove and clean. It is reusable.     Advantages at a Glance • Hygrostat control with actual value humidity preset• Digital display of current humidity and temperature values• Electronic defrosting automatic• 2 fan speeds• Level warning light when water tank is full• Optional fully automatic or continuous operation• Overflow protection with automatic shut-off• Washable air filter• Timer Function• Carrying handles• Connection for external condensate drainage • Stackable aluminum housing - lightweight and robust • Professional quality "made in Germany" with a favorable price-performance ratio      Technical data   dehumidification performance at 30 °C / 80 % r.H. 28.4 liters / day air volume 173 m³/ h Maximum room size 70 m² (175 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.1 A Power consumption max. 500W Recommended Coverage 10 A Cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (125g) GWP3 water bucket 5.2 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 250 x 342 x 517 mm Weight 14.5 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and operating hour meter and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years    Documents / Downloads   User Manual German

Learn more More Fewer

* not a stock item, available on order * A cost-effective, powerful dehumidifier with kWh consumption meter, specifically designed for water damage restorers and areas with permanently high humidity levels.The "35B" has been specifically designed to quickly dry water damage, e.g. after flooding or inundations. It features a very strong dehumidification performance, a consumption meter (kWh), and a power switch. A hygrostat for regulating the target humidity has been deliberately omitted in this version. Recommended room size up to 90m², from 8°C. The performance and drying speed can be additionally accelerated with free-standing fans if necessary (e.g. FN45 from our range).Characteristics• Dehumidification capacity of up to 35 liters / day (at 30°C/80% r.H.).• Function for continuous operation/continuous dehumidification.• Metered (MID) consumption meter (kWh).• On/Off toggle switch.• Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market.• Automatic professional defrost function.• Removable condensate tank.• Connection possibility of a hose for continuous drainage of the condensate.• Powder-coated metal housing/metal frame.• Very easy mobility due to transport handles and large running wheels for safe travel over steps and uneven ground.• Operating warning light / Defrost light.• No separate or additional coolant is required (closed circuit).• Washable air filter grid.• CFC free and compliance with WEEE standards.     usage examplesConstruction and Industrial Dryers: Thanks to their handy design, they are ideally suited for drying in at least slightly heated construction sites and in the industry.Drying of Water Damage: Due to its powerful dehumidification performance, the 35b is often used for drying water damage. Simple billing of consumption with insurance companies thanks to the integrated kWh consumption meter. dehumidification performanceThe dryer can be used over a temperature range of +8°C to +35°C, preferably in at least slightly heated rooms from 8°C and above. As with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C/80% r.H.: approx. 35 liters / 24 h (at 60% r.H.: approx. 18 liters)20°C/80% r.H.: approx. 18 liters / 24 h (at 60% r.H.: approx. 11 liters15°C/80% r.H.: approx. 14 liters / 24 h (at 60% r.H.: approx. 8 liters)10°C/80% r.H.: approx. 9 liters / 24 h (at 60% r.H.: approx. 6 liters)(r.H.=relative humidity)Technical data  Tension 220-240V / 50Hz Power consumption max. 450 (2.0 A) or 360W (at 20°C/60% r.H.) Sound pressure level 56 dB(A) (Manufacturer's specification) dehumidification performance max. 35 liters/day (30°C / 80% r.H.)  amount of recirculated air 230 m³/h (installed) condensate tank approx. 4.6 liters(direct hose connection possible) Compressor Rotary compressor  refrigerant R290C (135gr.) Dimensions (H x W x D)  780 x 420 x 420 mm Weight:    22 Kg Business closure: ON/OFF toggle switch Ambient temperature: 8°C ~ 35°C Application area: up to 90m² Swiss plug:  EU plug with fixed adapter for Switzerland  hose connection:  Yes Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Semi-professional dehumidifier for basements, construction sites, and laundry drying   This comfort dehumidifier protects and preserves what is dear and valuable to you. It is suitable for both robust dehumidification tasks in basements and laundry rooms, as well as for professional use in drying water damage or for keeping construction sites dry. Thanks to hot gas defrosting, it is also recommended for optimal drying results at low temperatures.     The all-rounder: Protects against mold, corrosion, and construction damage Excess moisture in the indoor air (> 60 percent) provides an ideal environment for pathogens. Mold also spreads in living spaces starting from this value, increasing the risk of respiratory diseases. Classic cars in the garage, artworks on the walls, and archived documents and books also suffer from excessive humidity. The causes of harmful humidity are diverse: deficiencies in building sealing, insufficient ventilation, as well as storms, flooding, or leaks in water-carrying pipes. The 122E keeps it dry.     Compact design – outstanding dehumidification performance Whether as a room climate improver in private settings or as a dehumidifier in commercial use – the cuboid stainless steel dehumidifier impresses with its comfortable features (e.g. 24h timer and auto-restart function as well as control panel lock function), an 8-liter condensate tank, and a strong dehumidification performance of 38 l/24 h at an air volume of 240 m³/h – sufficient for room sizes up to 100 m² or 250 m³. Thanks to the auto-restart function (memory function), the device automatically starts again in the pre-selected settings after a brief power interruption. For maximum user comfort, the control panel is equipped with easy-care membrane buttons and a digital display of room temperature and humidity. The target humidity can be set in 5 percent increments. Standard features also include a fill level warning light for a full water tank, overflow protection with automatic shut-off, and a reusable air filter that is easy to clean.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity."In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."    Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.     A dehumidifier for all occasions • Optimal suited for a healthy indoor climate in living areas• Moisture protection in archives, libraries, and art exhibitions• Corrosion and mold protection in (classic car) garages, basements, and storage rooms• Construction site drying and drying of damp masonry after water damage     Connection for external condensate drainage "For applications where regular emptying of the 8-liter condensate container is either not possible or undesirable, such as during unattended continuous drying operations in the basement, garage, holiday home, or on boats, the dryer features a built-in hose connection for direct drainage of the condensate into a drain. A short piece of suitable hose is already included in the delivery."     Hot gas defrosting automatic for faster drying results In low temperature ranges (below 12 °C), the integrated hot gas defrosting automatic system ensures consistently reliable air dehumidification – without long defrosting phases. Unlike the time-consuming recirculation defrosting of normal condensate dryers, the defrosting occurs through hot gas injection into the evaporator. This significantly shortens the duration of defrosting and achieves the drying goal more quickly.     SuperDry function for accelerated textile drying Practically for the quick dehumidification of wet laundry, clothing, or carpets is the special SuperDry function. This allows even large textiles to dry in no time, which do not fit in the tumble dryer.    Advantages at a Glance • Quality hot gas defrost automatic system• SuperDry function for accelerated textile drying• Automatic hygrostat-controlled dehumidification operation with real value humidity preset• Activated carbon filter against unpleasant odors• 24-hour timer• Auto-restart function (memory function) • suitable for construction drying • suitable for drying damp basements• suitable for laundry drying• Permanent mode• Easy-care material mix with a distinctive look• Digital display of current humidity and temperature values• Locking function of the control panel (child safety)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 38 liters / day air volume 240 m³/ h Maximum room size 100 m² (100 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 35°C moisture range 30 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.9 A Power consumption max. 750W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (96g) GWP3 water bucket 8 Liter operating noise 52 dB(A) at 1 m distance49 dB(A) at a distance of 2.5 m Dimensions L x W x H 453 x 310 x 635 mm Weight 27.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The Quadro X80 is a very powerful dehumidifier with a semi-professional design. The metal casing and internal components are solidly and durably built. Especially in a classic basement environment, the X80 is very efficient, but also economical in consumption.serviceThe target humidity can be set using the clear operator panel at the top of the device. Once the target humidity is reached, the dehumidification operation pauses, while only the ventilation continues to run to determine the current humidity. Various setting options are available to choose from:  continuous operationThe device operates continuously and ignores the measured room humidity. This setting is useful when you want to dry laundry or during the drying of water damage.  Operation with selected target moisture 30 – 90%By pressing a button, any target humidity value between 30% and 90% can be selected (in 5% increments). To prevent mold and odors, it is sufficient to maintain a humidity of about 60%. The ideal setting is therefore 55 or 60%. For economical operation, the software has a tolerance of 6% so that the compressor does not start at too short intervals. The set target humidity value corresponds to the average +-3%. This means that the drying will continue until the set value is undershot by 3%. Subsequently, the operation pauses until the set value is exceeded by 3%. So, for example, if you choose 55%, the room humidity will fluctuate between a minimum of 52% and a maximum of 58%.Comfort ModeThe "Dryfix-Intelligence" control automatically optimizes operation by taking into account the room temperature:- If the ambient temperature is below 5° C, the compressor stops to prevent the device from freezing. - If the ambient temperature is higher than 5°C and lower than 20°C, the device operates with a target humidity of 60%.- If the ambient temperature is higher than 20°C and lower than 27°C, the device operates with a target humidity of 55%.- If the ambient temperature is higher than 27° C, the device operates with a target humidity of 50%. Grosser TankThe rear-mounted condensate tank has a capacity of 6.5 liters and interrupts operation at full level with the integrated magnetic float. The front of the device immediately shows the fill level: blue light = operation running, red light = tank full or not properly inserted (operation is interrupted). Just above the tank is the hose connection, through which the condensate can also be directly drained into a drain (suitable hose: 10 mm inner diameter).  Two ventilation levelsThe air throughput is strong. With the slats at the top of the device, the dry air can also be directed in a certain blowing direction. This is very useful, for example, if you want to blow air into a laundry rack or specifically onto a damp wall. Due to the strong ventilation, the operating noise is clearly noticeable (noise comparable to a steam extractor). With the push of a button, you can choose between low (quieter) or high ventilation. In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.Properties & Advantages over other Dehumidifiers:• Digital control panel for regulating the desired humidity• Automatic function, i.e. the dehumidification operation automatically switches off after reaching the target humidity level and also automatically switches back on when it becomes more humid (including a +/- 6% energy-saving function, so that the device does not turn on and off unnecessarily often. • Automatic Professional Defrost Function• Suitable for unattended use without any problems• Also suitable for continuous operation/continuous dehumidification• Optimized for use in a classic cellar environment• Low power consumption measured against the strong performance• Equipped with a very reliable quality brand compressor• Comfort program with protection against unsuitable cold room temperatures• No interruptions during power failure (device continues from where it was interrupted)• Auto-stop when condensate tank is full including warning light• Removable 6.5 liter condensate tank• Connection possibility of a hose for continuous drainage of the condensate.• Absolutely maintenance-free / No separate or additional coolant is required (closed circuit)• Very easy mobility due to side grip recesses and foot rollers• Washable air filter• Modern design and appealing appearance• The device is immediately ready for use (no installation or assembly required)• CFC free• CE, GS and RoHS certified • Latest environmentally friendly refrigerant R290 (GWP: 3)usage examplesCellar Moisture: Ideal for damp cellars, old walls, and laundry rooms. Eliminates musty odors, stops mold growth, decomposition of masonry, and much more.Mobile Clothes Dryer: the device is also highly valued as a mobile clothes dryer. Close the windows and doors of the laundry room and the laundry will be dry overnight, depending on the size of the laundry room.dehumidification performanceThe dryer can be used over a wide temperature range from +7°C to +35°C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% humidity: 80 liters (90%: 88 liters, 60%: 44 liters) 20°C / 80% humidity: 44 liters (90%: 56 liters, 60%: 28 liters)15°C / 80% humidity: 36 liters (90%: 44 liters, 60%: 20 liters)10°C / 80% humidity: 24 liters (90%: 32 liters, 60%: 16 liters)5°C / 80% humidity: 18 liters (90%: 22 liters, 60%: 10 liters)Option HEPA-FilterIn addition to the standard filter, which filters dust from the air, a HEPA filter can be ordered for the X80. This HEPA filter cleans the air with a purity rate of nearly 100% with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, and other tiny contaminants are captured. Also, viruses of all kinds (including Corona). The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that flying pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed. The price of Fr. 38.- includes the filter with holder. For reorders, the filter can be ordered alone without the holder at a reduced price of Fr. 29.-.scope of delivery Plug-and-play device, no assembly required.The optional HEPA filter is not included in the basic package.  Technical data  Tension 220V-240V / 50Hz Power consumption max. 1291W max. / 940W (at 20°C/60% r.H.) Sound pressure level 1 m distance 56 dB(A) (our measurement) 2.5 m distance 54 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% r.H.) condensate tank Approx. 6.5 Liters   Compressor    Rotary compressor  refrigerant R290 / 180 g Dimensions (H x W x D)    64.5 x 40 x 31 cm   Weight 24 Kg cessation of operations Digital Ambient temperature Manufacturer's specification: 5°C - 35°C (our recommendation: 7°C ~ 35°C) Area of application general room dehumidification: up to approx. 200m² Laundry drying: dries 6-8 loads of laundry per day Swiss plug: Yes   hose connection Yes guarantee 2 years

Learn more More Fewer

Powerful air dehumidifier / construction dryer 50B-WDH with calibrated consumption meter.The "50B" has been specifically designed to quickly dry water damage, e.g. after flooding or inundations. It features a very strong dehumidification performance and only has a power switch for optimal operation on construction sites and during water damage drying. A hygrometer for regulating the target humidity has been deliberately omitted in this version. Recommended room size up to 120m², from 8°C. The performance and drying speed can be additionally accelerated with free-standing fans if needed (e.g. FN45 from our range).Characteristics • Dehumidification capacity of up to 42 liters / day (at 30°C/80% r.H.)• Function for continuous operation/continuous dehumidification• calibrated consumption meter (kWh)• On/Off toggle switch• Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market.• Automatic professional defrost function• Removable condensate tank• Connection possibility of a hose for continuous drainage of the condensate• Powder-coated metal housing/metal frame• Very easy mobility due to transport handles and large running wheels for safe travel over steps and uneven ground.• Operating warning light / Defrost light• No separate or additional coolant is required (closed circuit)• Washable air filter grid• Environmentally friendly refrigerant R290• CFC free and compliance with WEEE standards ImportantThe construction dryer "50B" is not suitable for use in very cold rooms, as it can freeze during continuous operation below 8°C due to the powerful dehumidification unit.   dehumidification performanceThe dryer is via a Temperature range from +8°C to +32°C is applicable, whereby, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C/80% r.H.: approx. 42 liters (at 60% r.H.: approx. 21 liters)20°C/80% r.H.: approx. 21 liters (at 60% r.H.: approx. 12 liters)15°C/80% r.H.: approx. 15 liters (at 60% r.H.: approx. 8 liters)10°C/80% r.H.: approx. 8 liters (at 60% r.H.: approx. 6 liters)(r.H.=relative humidity)Technical data  Tension 220-240V / 50Hz Power consumption: max. 820 (3.7 A) or 620W (at 20°C/60% r.H.) Sound pressure level: 57 dB(A) (Manufacturer's specification) dehumidification performance 42 liters/day (30°C / 80% r.H.)  amount of recirculated air 400 m³/h (installed) condensate tank approx. 5 liters (direct hose connection possible) Compressor Rotary compressor  refrigerant R290 (230gr.) Dimensions (H x W x D)  890 x 450 x 740 mm Weight 32 Kg cessation of operations ON/OFF toggle switch Ambient temperature 8°C ~ 32°C Area of application Rooms from min. 10m² to max. 120m² Swiss plug: EU plug with fixed adapter for Switzerland  hose connection Yes guarantee 2 years

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer

The Oasis dehumidifiers are among the widely used drying devices that have been successfully employed on construction sites and by private users for many years. The devices have now been revised and adapted to the latest state of technology with the newest environmentally friendly refrigerant R290 and improved efficiency. The Oasis D165 is suitable for basements and rooms up to 90m² and comes standard with a large bucket as well as a direct hose connection.Although visually very similar, the D165 dehumidifier has been completely revised in various respects compared to its predecessor:• improved efficiency• higher dehumidification performance• environmentally friendly refrigerant R290• improved automatic self-defrosting, thus usable down to 5°C (previously: 8°C)• reinforced front cover with spark guard bowl• reinforced, load-bearing wheelsThe dryer stands on 4 wheels but can also be mounted on a suitable wall bracket available from us if desired. The air intake area is at the back, where a filter cleans the moist air. The filter itself is easy to remove and clean. The dry air is blown out towards the front into the room. The Oasis is therefore ideal for general moisture control in a classic basement environment, for example in new buildings, but also for unattended continuous operation in temperature-controlled archives and on construction sites. For active laundry drying, the blower is rather too weak.The target humidity is regulated via a stepless hygrostat on the front. Once the set value is reached, the dehumidification operation pauses (the ventilation also stops) until the humidity rises again. The operation continues with the unchanged setting even after a power interruption. The D165 is therefore also suitable for operation with a timer, if you want to run the dryer, for example, only during off-peak hours. Thanks to the pipe evaporators, the D165 extracts water from the air even in low humidity ranges.The water is collected in the tank pushed in at the back, a float mechanically interrupts operation when full. Alternatively, a hose can be screwed onto the condensate collection tray (with a coupling / 3/4-inch thread), with the hose needing to have a slope towards the drain (no pump integrated in the device).usage examplesCellar Moisture: Ideal for damp cellars, old walls, and laundry rooms. Eliminates musty odors, stops mold growth, decomposition of masonry, and much more.Construction and Industrial Dryers: thanks to their handy, robust design, they are ideally suited for drying on construction sites and in the industry.Drying of Water Damage: The Oasis removes water from the air even in deep moisture areas through the pipe evaporators. This significantly accelerates the drying of water damage.dehumidification performanceThe dryer can be used thanks to hot gas defrosting over a wide temperature range from +5°C to +32°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:  30°C/80% r.H.: 28 liters / 24 h27°C/60% r.H.: 16.8 Liters / 24 h20°C/60% r.H.: 10.8 Liters / 24 h10°C/70% r.H.: 5.3 Liters / 24 h(r.H.=relative humidity)    Massive improvement regarding environmental compatibilityThe GWP (Global Warming Potential - impact on global warming) could be reduced by a factor of 800 (!) from 1430 (R134a) to less than 2 (R290). Furthermore, the D165 requires 10% less electricity while simultaneously increasing dehumidification performance by 14% (at room temperature 20°C, 60% r.H.). Technical data  Tension 230V / 50Hz Power consumption max. 360W Sound pressure level 1 m distance 54 dB(A) (our measurement) 2.5 m distance 51 dB(A) (our measurement) dehumidification performance max. 28 liters/day (30°C / 80% r.H.)  Bucket Capacity 9 liters, approx. 8 liters until operation interruption by float Compressor Rotary compressor  refrigerant R290 (150gr.) Dimensions (H x W x D)   60 x 38 x 36 cm (incl. wheels) Weight 23.5 Kg cessation of operations Hygrostatrad   Ambient temperature 5°C ~ 40°C  Area of application about 90m² Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years    

Learn more More Fewer

This construction dryer is very popular in professional use because it has a strong dehumidification performance of up to 30 liters per day and, at less than 20 kg, is considered one of the lightweight models in this category of dehumidifiers. This means that it can be easily transported by one person up stairs and even over scaffolding to the drying location. Furthermore, it is compact in dimensions, which saves space in the service vehicle. This is highly appreciated by water damage restorers who need to bring many devices to the damage site in the shortest possible time. This model also impresses during storage, as it is stackable and therefore takes up less space in the warehouse.  Operation 'The digital control panel at the top of the device allows you to select the desired target humidity in 1% increments. Continuous operation is also possible. By pressing the memory button, the set values are saved. This way, in the event of a power interruption, operation will automatically continue with unchanged settings as soon as the power supply is restored. A side-mounted operating hour meter provides information about the drying duration.' The humid room air is drawn in from the back and cleaned of dust and dirt through an easily cleanable filter. The dried air is then blown out from the front. The automatic hot gas defrosting ensures that dehumidification occurs with maximum efficiency even in cooler environments. The water extracted from the air can be collected in the inserted bucket or drained directly through a hose (suitable inner diameter: 10 mm). A float automatically interrupts operation when the bucket is full. If the water is drained through the hose, it first passes through the bucket to which the hose connector is attached. This system is very safe: if the hose is clogged, kinked, or not properly laid, the water backs up into the bucket. When the bucket is full, operation stops. Overflow onto the floor is therefore not possible, unlike dryers where the hose is directly attached to the drip tray.  Important functions • Digital control and side-mounted operating hour meter• High efficiency thanks to automatic hot gas defrosting• Robust housing with a foldable carrying handle and four small wheels• Easy operation• Built-in hygrometer• Water tank with automatic shut-off when full• Possibility to connect a hose for direct drainage of condensate• Air filter• Stackable   Suitable for • Drying of private cellars and rooms• Drying of commercial spaces and archives• Construction• Industry and Production• Rental• Construction and water damage drying• Waterworks  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers"Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."   Technical data  dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H.   10.8 liters / day 30 liters / day air volume max. 200 m³/ h Maximum room size 75 m² (180 m³) temperature range 5 - 35 °C Moisture range technical  Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3 A Power consumption max. 680 W Recommended Coverage 10 A Plug Connection cable with EU plug and Swiss fixed adapter refrigerant R290 (GWP: 3) Bucket + Hose connection 6.5 liter bucket and direct hose connection (suitable hose 10mm inner diameter) operating noise 45 dB(A) at 1 m distance 42 dB(A) at a distance of 3 m Masse (B x H x T) 338 x 550 x 358 mm Weight 19.5 kg Automatic defrosting Heissgas Attitude Digital Operator Panel Ventilator axial, single-stage blower Compressor rolling piston prefilter and operating hour meter and Continuous operation possible and Display and memory function yes (set values saved on button press) guarantee 2 years

Learn more More Fewer

The universal all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 170S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely needs servicing, and is very affordable considering its power and quality.".     Easy handling   "Using a mechanical hygrometer, the desired target humidity can be continuously adjusted between 32 - 100%, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 580 cubic meters per hour. With its stable cart construction and large wheels, frequent relocation to different usage sites can be easily carried out."     Bucket, direct hose connection and optional pump kit   The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards.   "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in areas above 40% humidity. Technically, the dryer can also be used in lower ranges down to about 5°C, even in unattended continuous operation.     Optional counters   The delivery includes no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)   Technical data  dehumidification performance at 30 °C / 80 % r.H. 40 liters / day air volume 580 m³/ h Maximum room size 100 m² (250 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.8 A Power consumption max. 600W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 540 x 490 x 963 mm (incl. guide bracket) Weight 32 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 12 mm Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

This powerful dehumidifier is designed to tackle demanding dehumidification tasks, making it ideal for use in water damage situations, for construction drying in large or heavily damp spaces, as well as for drying herbs.The dryer is positioned freestanding in the room for operation. The intuitive control panel is located on the front of the device, as is the intake area for the humid room air. The generated dry air is distributed widely in the room through the side outlet with high volume and strong airflow, ensuring efficient and even dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier. SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.condensation The condensate is optionally collected in a 5.5-liter bucket or can be directly drained through a hose into a lower-lying drain. A float automatically interrupts operation when the bucket is full.Temperature protectionIf the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal. dehumidification performanceThe dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 50.0 Liters / 24h (650W)27°C / 60% r.H. = 28.7 Liters / 24h (545W)20°C / 80% r.H. = 25.6 Liters / 24h20°C / 60% r.H. = 15.4 Liters / 24h10°C / 60% r.H. = 7.3 Liters / 24h(r.H.=relative humidity)    Characteristics• Dehumidification capacity of up to 50 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Memory function for storing data and for automatic resumption of operation after power interruption• Clear display including current humidity, target humidity, and status overview• Equipped with a high-efficiency rotary compressor (Rotary Compressor).• Automatic professional defrost function• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)• Powder-coated metal housing/ metal bracket• Very easy mobility due to side folding handles, guiding bar, 2 large and 2 smaller running wheels• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required)• Swiss plug 230 V • CFC free and compliance with WEEE standards, CE, REACH, GS and RoHS certified• Environmentally friendly refrigerant R290Examples of useDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.  Technical data   Tension 220-240V / 50Hz Power consumption max. 710W (3.2A) Sound pressure level 1 m distance 64 dB(A)2.5m distance 61 dB(A)(our measurement) dehumidification performance max. 50 liters/24h (30°C / 80% r.H.)  Recirculation air volume 450 m³/h (free-blowing) Condensation tank 5.5 liter tank plus direct hose connection possible Compressor Rotary compressor  refrigerant R290 (GWP: 3) Dimensions (H x W x D)  825 x 430 x 515 mm Weight 36 Kg Operational cessation per key press / digital display Ambient temperature 5°C ~ 35°C Area of application Rooms from min. 12m² to max. 130m² (340m³) Swiss plug Yes   hose connection Yes operating hour meter No Guarantee 2 years

Learn more More Fewer

A carefully crafted, reliable dehumidifier for construction sites and drying water damage. Due to its advantages, it is often used in private settings to keep damp basements and garages dry. Good mobility thanks to the handle and two large wheels.The AD432F is the further development of the AD430F. It is more compact, lighter, and more economical than its predecessor. A tube evaporator replaces the previous finned cooling element. As a result, the dryer is less susceptible to contamination and has better dehumidification performance at lower temperatures and lower humidity.Unlike conventional dehumidifiers in this category, the device has a scale instead of a float in the bucket for precise shut-off as soon as the bucket is full. There is also a hose connection for direct drainage of the condensate. An optional addition is a condensate pump, which can be conveniently hung in the bucket and connected directly to the dryer.The housing is made of coated sheet steel in a high-quality stainless steel look. When the desired target humidity is reached, the device completely shuts off. The built-in operating hour counter clearly and quickly shows how long the device has been in use.  Characteristics• Housing: Steel sheet coated in stainless steel look.• Setup: Rack and two large wheels for equally good stability and mobility.• Airflow: Air intake rear / Air outlet front.• Air filter: Protects the device from dust.• Operating hour meter• Fan: reliable axial fan.• Condensate drain: Water tank 8 liters with automatic shut-off when full, hose connection.• Pump Kit: Flexibly usable pump kit for permanent condensate drainage (accessory).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation • Made in Europe/Portugal     dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +32°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H.: 28.0 Liters / 24 h27°C / 60% r.H.: 16.5 liters / 24 h20°C / 60% r.H.: 12.1 liters / 24 h(r.H.=relative humidity)   latest technologyThe 432F features the latest technology. The pipe evaporators extract water from the air even when conventional dehumidifiers have long stopped producing a drop. The latest refrigerant R290 is almost climate-neutral and has improved efficiency.   Technical data  Tension 230V / 50Hz Power consumption max. 600W / 430W (at 20°C/60% r.H.) Sound pressure level 1 m distance 51 dB(A) (our measurement) 2.5 m distance 55 dB(A) (our measurement) dehumidification performance 28 liters/day (30°C / 80% r.H.) amount of recirculated air 250 m³/h installed (free-blowing: 550 m³/h) condensate tank Approx. 8 liters Compressor Rotary compressor refrigerant R290 Dimensions (H/W/D) 54 x 34 x 39.5 cm 78 x 44 x 54 cm with rack/wheels Weight 28 Kg cessation of operations Hygrostatrad Ambient temperature 3°C ~ 32°C Area of application up to 90m² (tempered rooms) resp. 70 m² (unheated rooms) Swiss plug Yes hose connection Yes operating hour meter Yes Guarantee: 2 years

Learn more More Fewer

Powerful air dehumidifier / construction dryer with metal housing. For effective drying of larger rooms and water damage. Characteristics• Dehumidification capacity of up to 50 liters / day• Electric hygrostat (LED) for regulating and setting the desired humidity• Function for continuous operation/continuous dehumidification• Power consumption meter (kWh)• Operating hour meter• Automatic memory function, saves the settings for automatic operation continuation after a power failure.• Clear display including current humidity, target humidity, and status overview• Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market.• Automatic professional defrost function• Humidity control in seamless 1% steps between 30% and 90% (plus continuous operation function)• Removable condensate tank• Connection possibility of a hose for continuous drainage of the condensate• Powder-coated metal housing/metal frame• Very easy mobility due to transport handles and large running wheels for safe travel over steps and uneven ground.• Operating warning light / Defrost light• No separate or additional coolant is required (closed circuit)• Washable air filter grid• Environmentally friendly refrigerant R290• CFC free and compliance with WEEE standardsHints"Not suitable for use in very cold rooms, as the cooling element can freeze during continuous operation below 8°C. Unlike similar models on the market, the ventilation also stops when the desired target humidity is reached, which means lower power consumption at the same performance."dehumidification performanceOverview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30 °C / 80% r.H. = approx. 50 L (60 % r.H. = approx. 25 L)20 °C / 80% r.H. = approx. 25 L (60 % r.H. = approx. 14 L)15 °C / 80% r.H. = approx. 18 L (60 % r.H. = approx. 10 L)10 °C / 80% r.H. = approx. 10 L (60 % r.H. = approx. 7 L)(r.H.=relative humidity)(akd)  Tension 220-240 V / 50 Hz Power consumption max. 820 (3.7 A) / 700 W (3.2 A) at 20 °C / 60 % r.H. Sound pressure level 57 dB(A) (Manufacturer's specification) dehumidification performance 50 liters/day (30 °C / 80 % r.H.)  amount of recirculated air 350 m³/h (installed) condensate tank approx. 5.5 liters (direct hose connection possible) Compressor    Rotary compressor  refrigerant  R290 (230gr.) Dimensions (H x W x D)     925 x 605 x 462 mm Weight 31 Kg cessation of operations Digital Ambient temperature 8 °C ~ 32 °C Area of application min. 11 m² to max. 120 m² Swiss plug Yes   hose connection Yes guarantee 2 years

Learn more More Fewer

High-quality profit dryer, specifically developed by us for the needs in water damage drying. Ideal for sanitary and drying companies, but also suitable for construction and industry.  Robust construction The new AD432R is a variation of the popular AD432F. The housing is made of robust metal, and the internal components are designed to withstand frequent transport or rough handling. Two side grip recesses and 4 heavy-duty rubber wheels (2 of which have brakes) facilitate quick and space-saving loading and unloading into emergency vehicles. As a practical addition, there is a socket on the side of the housing for connecting, for example, an additional ventilation.  Bucket or Pump Operation The standard delivery includes a large bucket as well as a direct hose connection for draining the water. The bucket is placed on a scale that automatically interrupts operation when full. Additionally, there is a connection box behind the bucket for a suitable condensate pump. The power supply for the pump is therefore provided by the device itself. Since the pump and dryer are connected in this way, the dryer stops in the event of a defective pump. The pump is optional and available from us.   latest technologyThe 432R features the latest technology. The pipe evaporators extract water from the air even when conventional dehumidifiers have long stopped producing a drop. The latest refrigerant R290 is almost climate-neutral and has improved efficiency. The AD432R is suitable• as a dryer in case of water damage• as a construction dryer• for the drying of archives, basements, and commercial spaces up to 90m²• for unattended continuous operation• for operation on a timer  dehumidification performanceOverview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 28 Liters27°C/60% r.H.: 16.5 Liters20°C/60% r.H.: 12.1 Liters(r.H.=relative humidity)  Replacement air filters for the AD432R are available from us at any time for CHF 32.30 per 5-pack. The 432R is manufactured in a specialized plant in Europe - no Chinese products.   Technical data  Tension 230V / 50Hz Power consumption max. 600W / 430W (at 20°C/60% r.H.) Sound pressure level 1 m distance 51 dB(A) (our measurement) 2.5 m distance 55 dB(A) (our measurement) dehumidification performance 28 liters/day (30°C / 80% r.H.) amount of recirculated air 250 m³/h (installed) 550 m³/h (free-blowing) condensate tank Approx. 8 liters Compressor Rotary compressor refrigerant R290 Dimensions (H x W x D) 60 x 37 x 38 cm Weight 32 Kg cessation of operations Hygrostatrad Ambient temperature   5°C ~ 32°C Area of application up to 90m² (tempered rooms) resp. 70 m² (unheated) 40% r.H. - 95% r.H. Swiss plug Yes hose connection Yes operating hour meter Yes Housing Metal, powder-coated RAL 5017 (Traffic Blue) guarantee 2 years

Learn more More Fewer

Professional construction dehumidifier with large bucket A high-quality dehumidifier for commercial use and water damage drying, manufactured in Europe. Its impressive exterior appearance is matched by its internal values: all electrical components are specially encapsulated, protecting the electronics from harmful deposits that could impair their function and longevity. Therefore, this dryer is also ideally suited for use under demanding conditions. Thanks to its maintenance-friendly design, it is easy to care for. "Compared to more affordable piston compressors, the high-quality 0.58 kW rotary compressor installed here offers the advantage of higher performance with comparatively lower power consumption – and additionally provides reserves for high dehumidification performance even in unheated rooms."In addition, the high-quality hot gas defrosting automatic system ensures a much more efficient dehumidification performance compared to other defrosting devices, without time interval-related defrosting pauses during which no dehumidification takes place.  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).  Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.  User-friendly Thanks to its durable housing, ergonomic grip recesses with an internal grip clip, and four sturdy wheels with a roll stop, the device is ideally suited for use on construction sites and for drying water damage. However, these advantages are also appreciated in commercial spaces or in private basement environments. The storage is also well thought out: two practical stacking grooves on the top of the device allow for a stable and space-saving stacking during transport and in storage.   An integrated operating hour meter reliably documents the exact duration of use even during longer drying operations.   Integrated compressor thermal protection with automatic shut-off   In drying operations with extremely high humidity and simultaneously high temperatures – for example, during water damage restoration – refrigerant dryers quickly enter their red performance zone. Here, the catchy "35 rule" applies: water damage above 35 degrees reduces the dryer’s lifespan to below 35%. However, this is not a question of component quality, but pure physics, which applies independently of the manufacturer to all refrigerant dryers on the market.  While most professional condensate dryers can still operate without issues at moderate humidity around 70% r.F. up to 35 °C, very high humidity combined with high room temperature results in significantly more energy being supplied to the humid air, which must be additionally "processed" through the refrigerant. Consequently, the pressure of the refrigerant in the system increases immensely, leading to a destructive load on the compressor. Although the dehumidifiers will initially continue to operate, they will do so well beyond their limit "deep in the dark red zone," resulting in an extremely shortened remaining lifespan.  "Therefore, the commercial dehumidifiers of the TTK-S series are equipped with an integrated compressor thermal protection for the active preservation of your devices:"Sensors continuously monitor the thermal load of the compressor. If the temperature is within the defined operating range, the integrated heat protection indicator pulses in a long sequence, indicating optimal operation of the dehumidifier. As soon as the temperature exceeds the critical threshold of 35 °C, the automatic system switches off the compressor to protect it, while the fan continues to operate, and automatically reactivates the compressor as soon as the 35° threshold is fallen below again. This protection not only significantly extends the lifespan of the dehumidifiers, but also prevents thermal damage to materials in the room and the building structure during their use.   Options • Dual meter available for additional recording of electricity consumption.• high-performance condensate pump for permanent drying with a pumping capacity of up to 50 m distance and a maximum delivery height of 4 m  Advantages at a Glance • High dehumidification performance even at low temperatures • Maximum dust and moisture protection for all electrical components• Extremely maintenance-friendly design • Optimal handling characteristics • Thanks to the roll piston compressor, it is transportable and storable in any position. • Practical stacking groove for stable, space-saving storage and transport • Multistage capability with identical models• Practice-oriented industrial design• Made in Europe  Technical data  dehumidification performance at 30 °C / 80 % r.H. 28 liters / day air volume 250 m³/ h Maximum room size 70 m² (175 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C moisture range 35 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.3 A Power consumption max. 500W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 375 x 345 x 603 mm Weight 26 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   

Learn more More Fewer

The robust and powerful all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely requires servicing, and is very affordable considering its power and quality."  Easy handling The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat, and continuous operation is also possible. With the used lamella evaporator, target humidities below 40% r.H. are difficult to achieve; however, this technology shows impressive dehumidification power in temperate and humid environments. Particularly useful in larger areas is the high air circulation volume of a substantial 1000 cubic meters per hour. With its stable trolley construction and large wheels, frequent relocation to different sites can be easily carried out.  Bucket, direct hose connection and optional pump kit The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards. "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     For continuous operation on construction sites   The possibility of connecting an external condensate drain – optionally with a condensate pump if needed – makes the construction dryer also ideally suited for longer unattended drying tasks, e.g. in construction drying.     Optional counters The delivery does not include an hour or consumption meter. You can order these from us if desired (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional)• Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % r.H. 55 liters / day air volume 1000 m³/ h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 6.1 A Power consumption max. 1400W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 Liter operating noise 54 dB(A) at 1 m distance 51 dB(A) at a distance of 2.5 m Dimensions L x W x H 530 x 500 x 965 mm (incl. guide bracket) Weight 39 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

The combination of compact dimensions and high dehumidification performance makes this model ideal for construction drying and drying after water damage. In addition, the dehumidifier is excellent for keeping commercial properties, archives, and production areas dry. Thanks to its two large wheels and practical handle, it can be easily moved across various objects.   Operation 'Through the digital control panel at the front, the desired target humidity can be selected in 1% increments between 40-80%. Continuous operation is also possible. The set values can be saved at the push of a button. This way, in the event of a power interruption, operation will automatically continue with unchanged settings as soon as the power supply is restored.'  The humid room air is drawn in from the front and cleaned of dust and dirt by a pull-out, easy-to-clean filter. The dried air is then blown out at the back. The display shows the currently measured humidity.   The water extracted from the air can be collected in the inserted bucket or discharged directly through a hose (suitable inner diameter: 12 mm). A float automatically interrupts operation when the bucket is full. If the water is discharged through the hose, it first passes through the bucket to which the hose connector is attached. This system is very safe: if the hose is clogged, kinked, or not properly laid, the water backs up into the bucket. When the bucket is full, operation stops. Overflow onto the floor is therefore not possible, unlike dryers where the hose is directly attached to the drip tray.     Important functions   • Digital control and side-mounted operating hour meter• High efficiency thanks to automatic hot gas defrosting• Robust housing with two large running wheels and guide handle• Easy operation• Built-in hygrometer• Water container with automatic shut-off when full• Possibility to connect a hose for direct drainage of condensate• Air filter     Suitable for • Drying of commercial spaces and archives• Drying of water damage• Building drying• Industry and Production• Rental  Propane (R290) as an environmentally friendly refrigerant in dehumidifiers"Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."      Technical data   dehumidification performanceat 20 °C / 60 % r.H.at 30 °C / 80 % r.H.   20.3 liters / day45.6 liters / day Air volume max. 350 m³/ h Maximum room size 115 m² (280 m³) Temperature range 5 - 35 °C Moisture range technical Moisture Range Practice 35 - 90 % r.F.40 - 90 % r.H. (lamella evaporator) voltage 220 - 240 V/50 Hz Nominal current consumption max. 4 A Power consumption max. 900 W Recommended Coverage 10 A Plug Connection cable with EU plug and Swiss fixed adapter refrigerant R290 (GWP: 3) Bucket + Hose connection 5.7 liter bucket and direct hose connection (suitable hose 12mm inner diameter) Operating noise 55 dB(A) at 1 m distance52 dB(A) at a distance of 3 m Masse (B x H x T) 422 x 820 x 580 mm Weight 30 kg Automatic defrosting Heissgas Attitude Digital Operator Panel Ventilator axial, single-stage blower Compressor Rolling piston Prefilter and operating hour meter and Continuous operation possible and Display and Memory function yes (set values saved on button press) Guarantee 2 years

Learn more More Fewer

This extremely powerful dehumidifier is specifically designed for demanding dehumidification tasks, such as the rapid drying of water damage, effective construction drying in large or heavily damp rooms, as well as the gentle drying of herbs. Due to its high performance, this dryer is available exclusively with a hose connection, making the use of a water container unnecessary and allowing for continuous operation.The dryer is to be set up freestanding in the room, with the clearly arranged control panel and the intake area for the humid room air positioned at the front of the device for easy access. The generated dry air is distributed widely in the room with high volume and strong airflow through the side outlet to ensure efficient and uniform dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier.SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.condensationThe condensate is drained directly through a hose into a lower-lying drain. The dryer does not have a bucket. A hose piece of about one meter is included in the delivery.Temperature protectionIf the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal. dehumidification performanceThe dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 90.0 Liters / 24h (1080W)27°C / 60% r.H. = 50.0 Liters / 24h (920W)20°C / 80% r.H. = 45.0 liters / 24h20°C / 60% r.H. = 27.0 Liters / 24h10°C / 60% r.H. = 13.0 Liters / 24h(r.H.=relative humidity)    Characteristics• Dehumidification capacity of up to 90 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Memory function for storing data and for automatic resumption of operation after power interruption• Clear display including current humidity, target humidity, and status overview• Equipped with a high-efficiency rotary compressor (Rotary Compressor)• Automatic professional defrost function• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)• Powder-coated metal housing/ metal bracket• Very easy mobility due to transport handles and 2 large and 2 smaller running wheels• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required)• Swiss plug 230 V • CFC-free and compliance with WEEE standards, CE, REACH, GS, and RoHS certified.• Environmentally friendly refrigerant R290Examples of useDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.  Technical data   Tension 220-240V / 50Hz Power consumption max. 1080W (4.8A) Sound pressure level 1 m distance 62 dB(A)2.5m distance 59 dB(A)(our measurement) dehumidification performance max. 90 liters/24h (30°C / 80% r.H.)  Recirculation air volume 850 m³/h (free-blowing) Condensation tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R290 (GWP: 3) Dimensions (H x W x D)  1010 x 584 x 575 mm Weight 54 Kg Operational cessation per key press / digital display Ambient temperature 5°C ~ 35°C Area of application Rooms from min. 14m² to max. 230m² (650m³) Swiss plug Yes   hose connection Yes operating hour meter No Guarantee 2 years

Learn more More Fewer

A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

Very powerful dehumidifier for demanding dehumidification tasks in temperate environments. Ideal for drying water damage, for construction drying in larger or heavily damp rooms. Due to its high performance, this dryer is only available with hose connection, thus without a water tank.The device is also ideal for construction sites and for drying wood.   Dehumidification capacity of up to 100 liters per day Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels: 30°C: 80% humidity: 100 liters (60%: 47 L.) 20°C: 80% humidity: 47 liters (60%: 27 L.)15°C: 80% humidity: 35 liters (60%: 19 L.)10°C: 80% humidity: 19 liters (60%: 13 L.)Quality product, which is mainly distributed through specialist trade across Europe. Quality standards include, for example: durability, compliance with the specified performance, CFC-free, TÜV + GS + EMC + CE certified, ISO certified, recyclable materials, etc. Devices with comparable performance usually cost several times more.Characteristics• Dehumidification capacity of up to 120 liters per day• Electric hygrostat (LED) for regulating and setting the desired humidity• Function for continuous operation/continuous dehumidification;• Memory function for storing data and for automatic operation continuation after a power failure• Clear display including current humidity, target humidity, and status overview• separate consumption meter kWh• Equipped with a highly efficient rotary compressor (Rotary Compressor). This TÜV and CE certified compressor is one of the most powerful compressors on the market.• Automatic professional defrost function• Humidity control in seamless 1% steps between 30% - 90% (plus continuous operation function)• Powder-coated metal housing/metal frame• Very light mobility due to transport handles and large running wheels for safe travel over steps and uneven ground. However, pay attention to the weight (60kg).• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required).• Swiss plug 230 V• CFC free and compliance with WEEE standardsusage examplesDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage removal: After flooding or after damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Climate control: For all rooms, halls, as well as for use in professional and hobby activities, etc.ImportantThe powerful compressor operates at a noise level of approximately 70 dB and is therefore not suitable for use in noise-sensitive areas. The fuses must release 9 Amperes or more, which is usually the case with a standard outlet. At temperatures below 10°C, the Akto1200 may freeze. In cold environments, we recommend the alternative model Fral F96 -> Dehumidifier F96.    Technical data   Tension 220-240V / 50Hz Power consumption max. 1840W (8.3 A) / 1560W (7.1 A) (at 20°C/60% r.H.) Sound pressure level 1 m distance 70 dB(A) 2.5m distance 67 dB(A) (our measurement) dehumidification performance 100 liters/day (30°C / 80% r.H.)  amount of recirculated air 1000 m³/h (free-blowing) condensate tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R454C (1kg), GWP: 148 Dimensions (H x W x D)  1110 x 630 x 470 mm Weight 60 Kg cessation of operations predefined values at the push of a button / digital display Ambient temperature 10°C ~ 32°C (our recommendation) Area of application Rooms from min. 4m² to max. 300m² (750m³) Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years Series WDH-1200HT 

Learn more More Fewer

The 650S is a robust and powerful construction dryer that stands out for its versatility. It effortlessly handles demanding tasks such as drying after water damage, new construction drying, and maintaining dryness in heated and unheated storage rooms. Manufactured in a specialized European facility, this dehumidifier impresses with its high-quality workmanship and reliable operation. The durable construction of the 650S guarantees a long lifespan, while the easy maintenance and low upkeep costs make operation even more economical. Despite its impressive performance and quality, the 650S is available at an extremely attractive price, making it an excellent choice for professional users.Easy to use The desired target humidity can be continuously regulated between 32 - 100 % using a mechanical hygrostat, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 925 cubic meters per hour. With its stable cart construction and large wheels, frequent changes of location can be easily carried out.     Direct hose connection and optional pump kit   Due to its very high dehumidification performance, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a slope towards the drain. If this is not possible, a suitable pump kit is optionally available, which can pump the water upwards and also outwards.   The operating switch is protected against dust and splashes by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position.     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in the range above 40% humidity. Technically, the dryer can be used at room temperatures down to about 5°C, even in unattended continuous operation.     Optional counters   Included in delivery is no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 91 liters / day Air volume 925 m³/ h Maximum room size 230 m² (550 m³) Minimum room size 4 m² Temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. voltage 220 - 240 V/50 Hz Nominal current consumption max. 9.5 A Power consumption max. 2100 W Recommended Coverage 16 A Cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter Operating noise 56 dB(A) at 1 m distance53 dB(A) at a distance of 2.5 m Dimensions L x W x H 616 x 511 x 1022 mm (incl. guide bracket) Weight 52 kg Automatic defrosting Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower Prefilter and Timer no (operation on timer possible) Continuous operation possible and Memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 16 mm Pump optional available (not included in the delivery) Guarantee 2 years

Learn more More Fewer

The AD20 is a robustly built condensation dryer. It is lightweight, portable, and can be carried like a suitcase. Thanks to the BlueDry technology, the AD20 reliably dehumidifies even at low humidity and temperature. Another advantage is the built-in automatic condensate pump with overflow protection (pumping height up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Robust housing made of impact-resistant plastic. It is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used to connect additional devices.Features and Benefits• Housing: made of robust, impact-resistant, and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Automatic water pump with overflow protection integrated as standard.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other.  Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 18.0 liters / 24h (Power consumption: 350 W)27°C / 60% r.H. = 11.0 liters / 24h (Power consumption: 310 W)20°C / 60% r.H. = 9.0 liters / 24h (Power consumption: 260 W)10°C / 70% r.H. = 5.0 Liters / 24h (Power consumption: 215 W)(r.H.=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption:  max. 350W Sound pressure level:  1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification capacity: max. 18.0 liters / day (30°C / 80% r.H) bucket / pump No bucket. Integrated pump with overflow protection, 4 m delivery height. Recirculation air volume level 1/2 200 / 270 m³/h refrigerant:   R1234yf Dimensions (H/W/D):      420 / 320 / 500 mm Weight:    16.4 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug:  Yes   Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer