Brass hose connector 20mm, intermediate piece / transition piece for connecting two hoses- Double hose nozzle- max. operating pressure for water is 16 bar Technical dataInternal thread 3/4 inch Suitable for hose inner diameter 16mm

Learn more More Fewer

Affordable tensioning set, ideal for securing air hoses to fans or also for everyday use to secure transported belts. Color: bright yellowLength: 2.5 metersStrap width: approx. 25 mmManufactured according to EN121952Ideal for trailers, bike carriersTensile strength approx. 100 kg Trotec Article No. 6.100.001.995

Learn more More Fewer

intake filter screenSpare part for insulation layer dryers of the VX series for drying in overpressure and underpressure processes. Trotec Article No. 7.700.000.001

Learn more More Fewer

This versatile extension ring allows hoses with a 50 mm inner diameter to be connected to connection fittings with a diameter of 38 mm. An ideal aid for professional construction drying and for the restoration of water damage. Suitable for example for the Trotec side channel blowers VE4 and VE6 as well as for the door slot nozzle PlanoPro4. Trotec Article No. 6.100.000.130

Learn more More Fewer

The joint cross system from Trotec can be expanded as needed by connecting several individual systems with these screw couplings. Trotec Article No. 7.200.000.003

Learn more More Fewer

DRYFIX absorbs moisture up to 200 times its own volume within minutes and transforms it into a solid gel. This allows spilled liquids to be quickly and efficiently absorbed. The practical helper in the household for textiles, floors, and furniture. Application examples in the household"Binds spilled liquids, such as knocked-over drinks like red wine or water, but also animal urine or vomit."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc. Odors are also trapped and largely absorbed.Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).     Simple application The powder is sprinkled directly into the standing water or on the damp areas. In doing so, it absorbs moisture down to the pores and forms a compact (environmentally friendly) gel, which also encapsulates odors and small particles such as small glass shards. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."   Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc. Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: Seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

"With these fittings, the air hoses are fixed in drill holes of floor slabs during the drying of water damage." • PVC, yellow• for 50 to 52 mm core hole drilling• suitable for air hoses with a 38mm inner diameter 1 piece = 10 pack Trotec Article No. 6.100.009.044

Learn more More Fewer

By using the Dryfix drying granules "Home" or "Pro", a gel is created that can be easily and quickly re-liquefied with this powder. Sprinkle it over the formed gel after completing the work. After approximately 5 minutes, it transforms back into water.  Advantages • No disposal of the gel necessary• Saves time• Simple application• Safe for the environment   Application example after flat roof renovation or application in the interior or household   1. Sweep the gel formed by the application of Dryfix granulate and fill it into a kettle. 2. Sprinkle some "Flu" granulate onto the gel and stir. 3. Reapply as needed 4. Pour away water            Application example for pipes, lines, or toilets   1. Sprinkle some "Flu" granulate directly onto the gel formed by the application of Dryfix granulate and stir. 2. Rinse with water        Important in flat roof renovation The "Flu" should not be applied in strong sunlight, as the heat generated can damage the top bitumen layer. This is especially true if the powder remains for an extended period. In this case, we recommend not to liquefy the drying granulate directly on the roof, but to collect it in a bucket and liquefy it there. Alternatively, the drying granulate can also be disposed of in a waste bag.  

Learn more More Fewer

DRYFIX absorbs water up to 200 times its own volume within minutes and transforms it into a solid gel. This allows work areas to be quickly and efficiently dried out, creating a dam that keeps incoming water at bay. Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc.    Simple application The powder is sprinkled in a circle or boundary around the work area directly into the standing water. The water in the work area is completely absorbed, and a dam of gel is formed. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."    Application examples in the household "Binds spilled liquids such as knocked-over drinks, animal urine, and much more."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc.   Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).    Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

This stainless steel nozzle was developed by experienced fluid mechanics engineers and features an optimal flow geometry.   The width or nature of the joint gap does not matter, as it is not part of the sealing system. Even wider joints result in a good efficiency, as the sealing system is designed to be flexibly used up to a joint width of 35 mm. The elastic rubber seals have a very good recovery value and adapt optimally to unevenness of the floor and the wall.    Furthermore, the nozzle features specially beveled clamping tabs that do not compact mortar residues when inserting into the joint, but rather displace them sideways. The rounding results in low resistance when inserting the nozzle.     Technical data   connecting piece 1 x 38 mm Extension to 50 mm possible with optional rubber adapter Dimensions W x H x D 400 x 130 x 40 mm width of the airflow 300 mm Weight 700g Material stainless steel Trotec article no. 6.100.009.010 guarantee 2 years

Learn more More Fewer

"Accessories for water damage drying. It has a diameter of 38mm and is suitable for connecting corresponding PVC hoses. The distributor directs the air where you need it. It allows for flexible positioning of the hoses. With external thread."  1 piece = 10 pack Trotec Article No. 6.100.009.051

Learn more More Fewer

The hose is particularly suitable for our devices in construction drying and water damage restoration. It is durable, vacuum-resistant, and has good pressure resistance. Also available in 51mm diameter.  scope of delivery 15m hose reel, black (also available in yellow on request)Technical data  Suitable temperature range 0 to +85°C length extended 15 m diameter 38 mm Material two-layer spiral hose with wire spring Bending radius 38 mm Trotec article no. 6,100,001,010 black guarantee 2 years

Learn more More Fewer

With this joint cross method, insulation layer areas under grouted wall and floor coverings can be dried without having to destroy the panels. Optimal for value preservation or for coverings that are no longer available, such as tiles or other grouted hard coverings. Unlike conventional distributors of this type, which have a hose connection at the head side, this system features a longitudinal hose connection for 38 or 50mm hoses. This leads to very favorable, low-turbulence pressure and flow conditions. Additionally, it offers the advantage that the system can be expanded arbitrarily for larger areas. Multiple systems can be connected using the optionally available coupling.scope of delivery • Aluminium distributor• 10 air hoses• 10 ground spikes   Technical data  air connections 1 air outlets 10 Masse (B x H x T) 250 x 38 x 100 mm Weight 660 g Trotec article no. 6.100.009.020 guarantee  2 years

Learn more More Fewer

This nozzle is designed to allow the entire air volume of the incoming or outgoing air to circulate under the door.  The nozzle is pushed under the door and connected to air hoses on both sides of the door. To ensure that the entire volume of air can be transported under the door, the passage inside the nozzle is expanded to the maximum width, allowing the air to circulate well despite the low flow height. A protective mat (protector) protects the floor underneath from scratches.  In this way, the complete drying installation can be flexibly relocated to rooms that have minimal noise disturbance for the affected party. Furthermore, the drying time is reduced if the room can remain closed. The nozzle is designed as standard for connecting hoses with a 38 mm inner diameter. For the use of 50 mm hoses, a separate adapter ring is available, which can be easily slipped over the nozzle to increase the diameter.  Technical data  connection nozzle I 2 on both sides suitable hose diameter 38 mm Masse (B x H x T) 400 x 74 x 157 mm Weight 1.7 kg Trotec article no. 6.100.000.160 guarantee 2 years

Learn more More Fewer

The "Superelastic-Flextract" is a highly developed hose made of two layers of PVC and reinforced with an integrated spring steel spiral as well as axial and radial thread reinforcement. This construction gives it exceptional robustness and flexibility. The smooth inner surface minimizes flow resistance and facilitates the passage of materials. Additionally, the hose is vacuum-resistant, tensile-resistant, and has excellent chemical resistance. Its ability to handle even the smallest bending radii makes it an ideal solution for demanding applications in confined environments.   Packaging unit: 15m Technical dataUV and ozone resistantCadmiumfrei0 to 85 °CDiameter 38 mm and 50 mm. 

Learn more More Fewer

The "PVC Flextract Hose" is a highly robust and flexible hose made of two layers of PVC, reinforced with an inserted spring steel spiral as well as axial and radial thread reinforcement. The smooth inner surface of the hose ensures a smooth flow, while its extreme flexibility and vacuum resistance allow for a variety of applications. Additionally, the hose is tensile, has good chemical resistance, and can be easily installed in tight spaces due to its small bending radii.Packaging unit: 15m Technical DataUV and ozone resistant Cadmiumfrei0 to 85 °CInner diameter: 50 mm

Learn more More Fewer

This high-quality protective cover has been specifically designed for the insulation layer dryer Qube+. It can be easily slipped over the device when needed and securely closed with zippers to ensure an optimal fit. Integrated openings at the front allow for smooth connection of hoses, while side ventilation holes ensure adequate air circulation.   Advantages at a Glance • Noise reduction of up to 5 dB(A) and additional modulation of high frequencies in low-frequency ranges perceived as quieter• Easy to clean and waterproof material• Optimal for continuous operation in residential environments• Quickly installable and accessible through double zipper system• Supply and exhaust openings ensure optimal engine cooling free from heat buildup.• Also for the use of the Qube+ with the attached drying control unit DA 4 Qube   SKU: 6100000070

Learn more More Fewer