The Mira air humidifier is an elegant and high-quality cold evaporator with a thoughtful control system. The control panel and display ensure optimal user comfort and provide information about the current humidity level in the room. The three-speed fan is whisper-quiet on the lowest setting, making the Mira suitable for noise-sensitive areas such as bedrooms.   Functional principle:Two inserted filter cartridges fill up with water from the tank. This creates a moisture buildup in the housing, which is expelled into the room through the quiet axial fan. This principle is very economical in terms of consumption, as only the fan is operated.Unlike ultrasonic humidifiers, the expelled moist air from evaporative coolers like the Mira is not visible. Minerals and lime from the tap water filled in remain in the filter, so that no lime dust can settle in the room. For this reason, especially in regions with hard, lime-rich water, we recommend using evaporative coolers instead of ultrasonic humidifiers.Service:Compared to the smaller model of the Stylies series "Orion", the Mira always displays the current value of the room humidity on the screen. The desired target humidity can be set in 5% increments at the push of a button between 40-65%, and continuous operation is also possible. Once the desired humidity is reached, the Mira pauses until the humidity drops again. To occasionally verify the true value of the air, the ventilation also starts in pause mode every 30 minutes for a short time. If the air is fine, the operation rests again for 30 minutes or until the sensor reports a value that is too low.Ventilation and automatic mode:In automatic mode, the Mira independently decides whether humidification is necessary and, if so, at which ventilation level. A reference value of 45% room humidity applies in this setting. If the measured humidity is far from this value, the ventilation operates at a high level. The closer the humidity gets to the 45% range, the lower the fan speed will be. If the humidifier is not set to automatic mode, the ventilation can be adjusted in three levels according to personal preferences. In bedrooms, the whisper-quiet operation at level 1 is usually sufficient, while in living rooms or offices, a stronger ventilation level can certainly be chosen. This also significantly increases the humidification performance.Timer:The timer allows the humidifier to be limited in time, depending on the need for 1, 2, 4, or 8 hours of operation. Another function of the timer is to remind the user to replace the filter and silver cube after 1440 hours of operation.Also well solved:The tank is large and transparent, and the fill level is always visible. Furthermore, the container has an integrated handle, making it very easy to lift out of the device for filling. With proper handling, very little water is spilled during filling.Consumables and Maintenance:To prevent bacteria from settling in the water tank and filters, we recommend using a so-called silver cube (Ionic Silver Cube) in dehumidifiers. This is placed in the water tray between the filters and cleans the water of bacteria. The consumable should be replaced once per season to maintain the humidifier's performance and hygiene.'After a power interruption, the humidifier must be restarted. It is therefore not suitable for operation with a timer or an external hygrometer.'Scope of delivery:- plug-in humidifier Mira- complete set of 2 filter cartridges- 1 silver die   2 year guarantee   Technical dataRecommended room size up to 35 m2 (= our recommendation, manufacturer's specification: 50 m2)Consumption 18 wattsHumidification performance: up to 0.35 liters/hour.Dimensions (WxHxD) 430x338x225mmWeight 3.60kgWater tank 5.2 litersOperating noise level 1: 25 dB(A) at a distance of 2.5m 

Learn more More Fewer

The large area humidifier B400 is a powerful cold evaporator with air washing function. It is comparatively quiet and compactly built, ensuring good humidity in dry living rooms, overheated offices, as well as storage rooms and workshops up to 250 m².Functional principleA humidification mat is pulled through the water bath by a wheel and absorbs moisture. This creates a moisture buildup in the device, which is released into the room air by a two-stage adjustable fan. This method is very effective in humidification performance, while particles in the air are captured on the humidification mat and deposited in the water bath. The air humidifier thus also cleans the air of airborne particles such as dust and pollen.serviceThe operation is incredibly simple. The humidifier has only two rotary switches:Operating switch: three-stage - OFF, fan level 1 or fan level 2Hygrostat switch: for stepless regulation of the desired target humidityTwo lights also indicate when the device is in operation and when the water tank is empty.The humidifier has a metal housing (white powder-coated), stands on 4 wheels, and is easy to move.VentilationThe ventilation is two-stage, the maximum air output is 500 m³, the operating noise is good on level 2, and only minimally perceptible on level 1. The three ventilation grilles at the air outlet can be easily adjusted either forward or backward.Consumables and MaintenanceThe water bath (pull-out drawer) serves to provide the necessary moisture on one hand, but on the other hand, it also collects the dirt that is removed from the air. Therefore, it should be completely emptied and cleaned once a week. The humidification wheel is clicked into the holder from above and can be easily removed for cleaning; the degree of contamination and thus the necessity for cleaning is visible from above.As with all evaporative coolers, it is also advisable to disinfect the water in the B400 to prevent germs and bacteria. For this purpose, the silver cubes (Ionic Silver Sticks) are suitable, which are available as consumables from us. The silver cubes should be replaced once per season; otherwise, no consumables are required for this device.scope of delivery• ready-to-use device  Technical data  Tension 230V/50Hz consumption max. fan speed 1 fan speed 2 Standby 53 Watt 31 Watt 45 Watt 0 operating noise (at a distance of 2.5m) Level 1: 44 dB(A) Level 2: 49 dB(A) circulating air level 2 500 m³/h humidification max. 60 liters / 24 h Room size max. 200 m² steering mechanically Weight 19 kg Mass (HxWxD) 74 x 63 x 34 cm guarantee  2 years

Learn more More Fewer

The LB50 belongs to the so-called cold water evaporators and is suitable for humidifying large spaces.The air is first cleaned by a 3M carbon filter and then passed through the humidifying evaporation mat of the humidifier. The water evaporates naturally, ensuring a consistent humidity level in the room.The evaporation capacity of the humidifier is a maximum of 1.9 liters of water per hour and is sufficient to humidify rooms up to 180 m2 / 450 m3. The addition of a silver stick ("Ionic Silver Stick" or "Clean Cube") to the cold water tank is highly recommended for operation, as it makes the humidification process very hygienic.Good humidity:the relative humidity should average between 40% and 60%. This prevents the drying out of the skin and mucous membranes and improves overall well-being. The moisture prevents cracks in wooden furniture and parquet floors and counteracts the tuning of musical instruments.The humidifier is equipped with a hygrostat and the water tank has a capacity of approximately 10 liters. The Sanvia LB50 humidifier evaporates the following amount of moisture with the different ventilation settings:Stage 1 0.9 liters / hourStage 2 1.3 liters / hourStage 3 1.9 Liters / Hour The Sanvia LB50 humidifier is easy to clean and has an easy-to-fill water tank. A good humidifier with a large humidification capacity, suitable for any environment.2 year guaranteeShipping costs for 1 item: from Fr. 16.- (Basic courier, further shipping options can be viewed in the shopping cart) Technical data Voltage: 230V/50HzPower consumption: max. 170WOperating noise: Level 1: 45 dB(A) / Level 3: 56 dB(A)Recirculation: 180 - 320 m3/hMoistening: max. 45.6 L/24 hrs.Room size max.: 180 m2Control: mechanicalWeight: 19 kgMass B x H x T): 50 x 60 x 35 cmWarranty: 2 years

Learn more More Fewer

Improve the working conditions in your factory, hangar, or workshop with our mobile evaporative coolers. They provide an efficient and cost-effective way to create a refreshing and productive environment for your employees and customers.     Important functions  Efficient and durable spot cooler for industrial applications Quiet operation even with high air flow Standard automatic swivel function Large water tank for long operation Large, durable wheels with brakes enable easy movement. Manually connect the water hose or water tank and provide your employees with comfort. Corrosion-resistant plastic housing Including air filter for easy maintenance Remote control for easy speed adjustment UV lamp that disinfects the water   Advantages of Evaporative Cooling  The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Nearly maintenance-free equipment     How does it work? The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates, and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance.     Evaporative cooling and humidity A certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity. "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most."   "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air."   "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out."       Application examples  Agriculture for cooling livestock barns Construction for outdoor events and cooling of marquee tents Cooling of industrial and production halls Cooling of terraces and garden restaurants Rental   Technical data Air performance: 12000 m³/h Loaded Airflow: 8000 m³ Maximum area: 250 m² Energy consumption: 500 W Mains voltage: 220-240 V /50 Hz Rated current: 2,3 A Water consumption: 8-10 liters per hour Tank capacity: 80 Liter Direct water connection: ½ inch Water status indicator: Yes Sound level: 67 dB(A) Device dimensions (LxWxH):  1050 x 600 x 1460 mm Net / Gross Weight: 50/55 kg Cooling filter volume: 0.08 m³ Guarantee: 2 years  

Learn more More Fewer

Cool your factory, hangar, or workshop for little money. Our mobile evaporative coolers offer a cost-effective alternative to traditional air conditioning and create a pleasant working environment for your employees or customers.   Important functions Efficient and durable spot cooler for industrial applications Quiet operation even with high air flow Standard automatic swivel function Large water tank for long operation Large, durable wheels with brakes enable easy movement. Manually connect the water hose or water tank and provide your employees with comfort. Corrosion-resistant plastic housing Including air filter for easy maintenance Remote control for easy speed adjustment UV lamp that disinfects the water   Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Almost maintenance-free equipment   How does this work?The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance.   Evaporative cooling and humidityA certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity.   "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air."   "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out."     Technical Data BC 221: Kühlfilter dm³: 120 Air performance m³/h: 22,000 Loaded air flow m³/h: 15,000 Maximum area m²: 330 Energy consumption W: 800 Mains voltage V/Hz: 220-240/50 Rated current A: 3.7 Water consumption l/h: 12-18 Tank capacity l: 120 Direct water connection size: ½" Water status indicator: Yes Sound level dB(A): 67 Device dimensions (L x W x H) mm: 1230 x 640 x 1730 Net / Gross weight kg: 64/69 Suitable for: agriculture Automobile Buildings and commercial spaces construction industry emergency services Events and temporary buildings Industry and Production Leisure and Recreation Defense and Aerospace Rental and Leasing

Learn more More Fewer

The BC 341 offers an innovative solution for the air cooling of large areas. With integrated UV light for hygienic air and minimal energy consumption, it is perfectly suited for rooms up to 400 m², where conventional air conditioning systems reach their limits.   Important functions Powerful air volume of 30,000 m³/h for cooling large work areas No installation required, no hoses need to be laid. Low operating costs Easy maintenance Evaporation filter mats that retain dirt UV lamp that disinfects the water Low energy consumption – 1.3 kW Ideal for workshops and warehouses, plastic, glass, assembly plants and paint shops, agriculture, greenhouses, and aircraft hangars.   Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Nearly maintenance-free equipment   How does it work?The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates, and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance.   Evaporative cooling and humidityA certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity.   "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air." "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out."     Technical Data BC 341: Kühlfilter dm³: 340 Air performance m³/h: 30,000 Loaded air flow m³/h: 23,000 Maximum area m²: 400 Energy consumption W: 1050 Mains voltage V/Hz: 220-240/50 Rated current A: 4.9 Water consumption l/h: 10-15 Tank capacity l: 200 Direct water connection size: ½ Water status indicator: Yes Sound level dB(A): 70 Device dimensions (L x W x H) mm: 1690 x 920 x 1910 Net / Gross weight kg: 130/140 Suitable for: agriculture Automobile Buildings and commercial spaces Construction Emergency services Events and temporary buildings Industry and Production Leisure and Recreation Defense and Aerospace Rental and Leasing

Learn more More Fewer