This thermo-hygrometer allows for quick and uncomplicated monitoring of a healthy indoor climate, thanks to its clear display and simple operation, making it ideal for living and sleeping areas, offices, training rooms, and meeting rooms. Hair hygrometers, like this model, are characterized by their high precision. Equipped with a high-quality measuring mechanism 'Made in Germany', it ensures a measurement accuracy of ± 3 % r.H. in the range of 20 to 100 % relative humidity. The measuring principle is based on the length change of a specially treated synthetic fiber, which expands in moisture and contracts in dryness. This length change is converted into a rotational movement that controls the pointers on the display. The display of the hygrometer can be adjusted and calibrated through a simple zero point correction.   Ventilation recommendations   The display shows two scales with ventilation recommendations. During the cold season, the room humidity should not exceed 60%, while in summer, a slightly higher humidity of up to 70% in living areas is considered normal. Cooler basements, on the other hand, should not have more than 60% humidity year-round to avoid mold and odor formation. If the humidity remains above the suggested values despite ventilation, the use of a dehumidifier should be considered.     Hanging on the wall   This device is designed to be mounted on a wall. For this purpose, a suitable hole for a nail or screw is incorporated into the housing on the back. To ensure that humidity and temperature values are measured as accurately as possible, large air slots are provided on the sides. These allow for the free flow of room air and thus the best possible measurement. Please note that cold or poorly insulated exterior walls can distort the value. Therefore, optimal placement with reliable measurement values is on walls inside the building.     Recalibration   After transport, it may happen that the mechanical settings are altered due to vibrations. Additionally, accuracy may deteriorate if the thermo-hygrometer has been stored in a very dry environment for a long time. In this case, the humidity display can be easily corrected using a small screwdriver on the side adjustment screw. The temperature screw is accessible from the back of the housing (bottom hole). For calibrating temperature and humidity, it is easiest to use another thermo-hygrometer that you consider reliable for the values. Please note when adjusting by hand that warm, moist hands can also change the displayed values, just like breath.     Technical data   Measuring range temperature 0 - 40 °C Accuracy / Resolution ± 2 °C Measuring range humidity 0 - 100 % Accuracy / Resolution ± 3 % r.F. Housing stainless steel Measurement method Synthetic hair Trotec article no. 3.510.205.012 Guarantee 2 years

Learn more More Fewer

Trotec Article No. 6.100.009.054

Learn more More Fewer

This flexible measuring device allows for quick and straightforward measurements of air velocity, air temperature, and air volume flow. It is ready for use immediately and presents the measurement values clearly on a large, backlit display. In addition to real-time measurement, minimum and maximum values can be retrieved, and the current measurement value can be recorded at the push of a button. A special feature is the flexible adjustable 40 cm long gooseneck, which allows measurements even in hard-to-reach places or at remote supply and exhaust openings. This makes the device an ideal tool for HSK installers when measuring exhaust grilles, ducts, and swirl outlets. Furthermore, the device is excellent for hobby athletes to determine wind strength as well as for performance monitoring of household appliances such as air conditioners and cooling fans in the IT sector. Advantages at a Glance   • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min)• Air temperature (in °C and °F)• Optimal price-performance ratio• Minimal value, maximal value, and hold function• Semi-flexible, 40 cm long gooseneck probe• Backlit display• Softtouch function keys• Automatic switch-off   Scope of delivery   • Measuring device• Battery• Carrying bag• User manual     Technical data   Air flow measurementMeasuring rangeaccuracyresolutionMessprinzip  1 - 30 m/s3 % (=0.2 m/s)0.01 m/simpeller  Measurement of air volume flowMeasuring range  1 to 999.9 m³/min  Measurement of air temperatureMeasuring range accuracy resolution  -10 °C to +60 °C ± 1.5°C 0.1 °C  Display  LCD Energy supply 9V Block Battery Ambient temperature 0 °C to +50 °C Mass (without goose neck) L x W x H 165 x 54 x 32 mm Weight 270 g Tripod thread no Automatic shutdown system and Trotec article no. 3.510.205.043 Guarantee 2 years

Learn more More Fewer

The user-friendly handheld measuring device is ready for use within seconds of being turned on and reliably captures temperature measurements in the range of -40 °C to +200/280 °C (probe/IR), which are clearly readable on the bright, backlit display even in poorly lit environments. The integrated infrared sensor measures the surface temperature of materials, especially food, with a response time of less than 500 ms. In addition to the digital temperature display, three indicator LEDs directly signal whether the measured temperature is within the HACCP ranges (Hazard Analysis and Critical Control Points). According to the HACCP guidelines for food, maintaining a temperature range below 4 °C and above 60 °C is crucial to prevent the growth of health-threatening microorganisms. Temperatures between 4 °C and 60 °C can promote germ growth. "For quick verification of compliance with these temperature limits, the BP5F food thermometer is equipped with three indicator LEDs in addition to the digital display, which visually represent the respective temperature range." The practical advantages include the combination of infrared and probe thermometer in one device, core temperature measurement from -40 °C to +200 °C (probe) or up to +280 °C (infrared), a 5 mm measurement spot diameter at a distance of 100 mm, a compact design with a retractable core temperature sensor, a robust and washable IP65 construction, a backlit display, an LED quick indicator for HACCP-compliant temperature ranges, compliance with LFGB regulations (§31) and DIN 10955:2004, as well as an optimal price-performance ratio.

Learn more More Fewer

With this high-quality laser scanner, surfaces such as interior walls and facades can be quickly and easily checked for potential mold risk due to cold spots. The device allows for a non-contact measurement of the wall surface temperature using infrared and simultaneously automatically determines the dew point temperature value. The backlit LCD display ensures a clear and easily readable display of measurement values even in unfavorable lighting conditions. The integrated 20:1 dual laser visualizes the measurement spot on the respective measurement object. For dew point determination, the device additionally measures the current room temperature and humidity. Thanks to the acoustic and visual alarm function based on the traffic light principle, as well as the integrated bar graph indicator, the user quickly receives information even with larger measurement areas about whether the dew point has been reached or fallen below at a measurement point, thus indicating a risk of condensation and mold. 'Since a long-term increased relative humidity of about 70% is sufficient for the formation of mold on material surfaces, the device warns both acoustically and visually several degrees before the actual dew point. Therefore, it is worthwhile to check cold wall areas to detect condensation early and take preventive measures.'     "With 20:1 optics, always keep the measurement spot in view"   Measure the surface temperature of walls, materials, and objects contactlessly, meaning without touching the measurement object. To accurately assess the measurement area (measurement spot), the device is equipped with a dual laser pointer. This projects two laser points onto the surface to be measured, precisely marking the diameter of the measurement spot. In this area, the temperature value is captured by an infrared sensor, and an average value is determined. The rule is: the smaller the measurement spot, the more accurate the measurement, and the further the measuring device is from the measurement object, the larger the measurement spot diameter will be. Thanks to its geometric resolution of 20:1, the handheld measuring device also allows for accurate measurements from several meters away.     Recognizing mold risk   Since the device also has an air temperature sensor and an air humidity sensor (measuring range from 0% to 100% relative humidity) in addition to the infrared surface temperature measurement, the dew point temperature is automatically calculated from these 3 values. In addition to the exact values, an audible signal and/or the color of the LCD display will indicate whether the measured values are in the critical range, if desired.   Green Display: everything is fine Oranges Display: Measured values are approaching the critical dew point value Red Display: Temperature is dangerously close to the dew point or has already reached or fallen below it, allowing condensation to form.   With the increasingly faster beeping sound signal, you can also work by ear if desired. Especially for large area measurements on walls, you can quickly scan where critical points are located with the acoustic and/or optical alarm – all without having to pay attention to the exact measurement values. In addition, the bar graph indicator displayed on the screen provides quick orientation with an easily understandable bar chart and schematically shows you on a scale from 0% to 100% how close the measurement values have come to the dew point temperature.     Versatile   Due to the large temperature measurement range of -50 °C to 260 °C, this measuring device is recommended not only for use as a dew point scanner but also for other applications. The non-contact infrared measurement reliably protects you from surfaces that are too hot or too cold.   "Whether it's heating systems, hot pipes, tanks, boilers, engine blocks, control boxes, or deep-freeze storage – measure temperatures without burning your hands or getting "stuck" to icy surfaces. This device can even be used for preparing baby food when you want to quickly check the correct drinking temperature of the bottle from the outside."     With its compact dimensions, the lightweight device weighing only 163 g can be conveniently carried in a jacket pocket. Additionally, a practical carrying case for attachment to a belt is included in the delivery.   The infrared thermometer is powered wirelessly by the included 9-volt block battery. Thanks to the battery status indicator in the LCD display, you always have the current charge level in view. The automatic shut-off when not in use is energy-saving – allowing you to perform countless measurement tasks!     Advantages at a Glance   • Measurement of surface temperature, air temperature, humidity, and dew point temperature with just one device• Dew point alarm indication through display color change, alarm tone, and bar graph indicator• Non-contact surface temperature measurement via infrared from -50 °C to 260 °C• Messoptik 20:1• Messfleck diameter display via dual laser pointer• Backlit display• Auto shut-off• Practice-oriented German industrial design – protected design pattern• Optimal price-performance ratio   Scope of delivery   • Measuring device • 9V Battery• User manual• Protective bag     Technical data   Optical resolution (D:S) 20:1 Smallest measuring spot Ø 25.4 mm (Distance 508 mm) Measuring range sensor -50 to +260 °C Deviation Sensor ± 3.5 Deviation sensor at 20 °C 1 % ± 1.5 Measuring range of integrated temperature sensor 0 to +50 °C Dew point temperature -30 to +100 °C Dew point deviation ±2.0 % Measuring range humidity 0 to +100% r.h. Humidity Deviation ±3.5 % (between 20-80 % r.F.) Response time temperature sensor Spectral Sensitivity 8 - 14 µm Energy supply 1 x 9 V block battery (included in delivery) Masse (H x B x L) 82 x 58 x 168 mm Weight 163 g Trotec article no. 3.510.003.035 Guarantee 2 years

Learn more More Fewer

A precise measuring device for quick control and monitoring of environmental noise, workplace noise, and in private surroundings. Measures sound sources within a measurement range of 30 to 130 dB(A). Additionally, minimum and maximum values can be displayed and stored.   This easy-to-handle sound level meter combines modern electrodynamic transducer technology in a compact design. As a sound level meter according to accuracy class 2, the device is ideally suited for the documentation of machine and environmental noise, as well as workplace and noise hazard measurements.   The large four-digit measurement display with additional bar graph representation is easy to read in any environment thanks to the LCD backlighting.   With A- and C-frequency weighting, fast-slow time weighting, and many other practical features, this measuring device from the Multi-Measure Professional series represents the perfect solution for demanding sound level measurements.   Compact format, lightweight, and button layout optimized for one-handed operation.      Versatile application, for example   • Noise hazard measurements for occupational safety• Environmental protection operations for the determination of ambient noise• Determination of noise areas for noise reduction programs in companies• Control and selection of hearing protection devices• Compliance monitoring of noise protection regulations• Control measurements in climate and heating technology     Advantages at a Glance   • Corresponds to accuracy class 2• Frequency assessment according to characteristic A and C• Maximal and Minimal Value Storage• Storage for 50 measurement values• Switchable time evaluation (Fast?/?Slow)• Display lighting• BarGraph display• 1/4-inch tripod thread     scope of delivery   • measuring device • Battery• Wind protection • Carrying case• User manual     Technical data  Sensory Sound dB(A) + Sound dB(C) sound measuring range  30 - 130 dB(A) sub-measuring ranges 30...80 dB, 50...100 dB, 80...130 dB, 30...130 (auto) dB(A) accuracy Class 2 according to DIN EN 61.672 resolution 0.1 dB(A) response time 0.5 seconds frequency range 31.5 Hz - 8 kHz dynamic range 50 dB data storage 50 measured values Power supply 9V Block-Batterie operating time > 30 Std. Weight 230 g Masse (H x B x T) 210 x 55 x 32 mm Vicinity: temperature humidity 0 - 40 °C 10 - 90 % r.H. (non-condensing) Trotec article no. 3.510.005.010 guarantee 2 years

Learn more More Fewer

Your turbo for warmth or coolness throughout the room   Stylish and equipped with innovative Turbospin technology, this 2-in-1 heater fan presents itself. The multi-talent combines a powerful heater and a quiet fan in its modern design housing, creating a pleasant feel-good climate. If you previously needed two separate devices to avoid sweating in the summer and enjoy cozy warm evenings at home in the winter, you can save money and space with this multifunctional 2-in-1 device.     Supplementary heating in winter, fan in summer   On cold days in winter or during the transitional period, when it is not warm enough in your own four walls, in the office, or in the holiday home, the Turbospin technology provides cozy warmth as well as quick and even heat distribution. The power can be optionally set to 1200W or 2000W. Where conventional electric heaters often do not blow the heat far enough into the room, this fan creates more uniform room temperatures through a circulating airflow.   "In addition to its electric heating function, it also features a turbine-strong ventilation mode with two manually selectable speed levels, so you can always keep a cool head in a well-measured way even on hot summer days. The powerful airflow of the fan noticeably cools more effectively, as it circulates more than twice the amount of room air compared to a conventional fan with the same power without Turbo Spin technology. The fact that it operates with high running smoothness and is surprisingly quiet is another comfort plus."     This is how the Turbospin technology works   In apartments with high ceilings, drafty areas, or awkwardly shaped rooms, the warm heating air often does not reach every part of the room, leaving frequently uncomfortable cool spots. The cause of these temperature fluctuations in the room is inadequate air circulation. The warm heating air does not even reach the floor but rises up to the ceiling, cools down there, and with increasing distance from the radiator, the room temperature also drops. A room-filling distribution of warm air does not occur.   The solution is called Turbospin: The device generates a more uniform air circulation throughout the room with its Turbospin technology. Air is drawn in from the back into the fan. There, it meets the 5 specially curved rotor blades of the extremely fast-spinning impeller. These deeply curved fan blades ensure a particularly powerful turbulence and enormous acceleration of the airflow. The spiral-shaped protective grille of the fan further enhances the turbulence. The now highly compressed airflow shoots out of the device as a rotating column of air and penetrates deep into the room. Cold and warm air zones in the room are broken through and mixed by the airflow. The outgoing airflow hits the opposite wall or corner of the room and is reflected in all directions. The air flows back to the back of the fan in constant circulation over the side walls and the ceiling. There, it is drawn in again, and the cycle starts anew. Through this effective Turbospin principle, your room air is maximally mixed and circulated. The difference between cooler floor temperature and warmer ceiling temperature is significantly reduced, and instead, you will feel a more uniform temperature throughout the entire room.   Isn't a conventional fan or heater sufficient? Many standard fans or heaters do not create the described air circulation effect with the same intensity. Their effective range is inherently smaller, so you need to be closer to the device to feel the desired heating or cooling. The turbo power of this model, on the other hand, is significantly stronger and operates in a different league.     Cooling and heating – The right indoor climate for every season   Heating in Winter: On cold days, the Turbospin technology ensures faster and more even room heating. In two-story maisonette apartments, which need to be heated more due to their larger areas and stairs in winter, the device can improve air circulation depending on its placement and room size to allow warmth to reach everywhere. Use the device both as a supplementary heater with heating function, or as a fan to distribute the cozy warmth of a fireplace throughout the room.   Cooling in Summer: In the warm summer, the two-stage fan provides a pleasant cooling effect with its two cold settings. The fresh breeze is quickly noticeable in the room due to the strong airflow. Tip: Position the fan in the bedroom in front of the open window and blow out the accumulated heat from the room in no time early in the morning or in the evening. The fresh air in all areas of the room ensures a restful sleep.   Cooling Turbo: This device is also excellent for supporting an air conditioning unit. The fan distributes the cooled air widely throughout the room, thereby increasing the cooling effect of the air conditioning unit.   Fresh air in autumn and winter: During the dry heating period, the apartment should be well-ventilated at least once a day. Fresh air contributes to greater well-being and protects against colds. Blow the stale and dry heating air out of the window in no time.   Energy-saving tip: Cold feet or noticeably cooler spots in the room usually do not result from a heating system set too low. Even poorly placed furniture or seating groups can cause warm air not to distribute optimally in the room. Therefore, increasing the room temperature rarely achieves the desired goal – but it does lead to higher energy costs! This device can increase the efficiency of permanently installed heating systems or air conditioning units. The warmed or cooled air can be distributed more quickly and completely in the room through clever placement, so that less heating or cooling is required.     Design, comfort and safety perfectly combined   The fan impresses with its clear aesthetics and a design inspired by the shape of a high-performance turbine. And with the recessed transport handle on the back, the device, which weighs only 2 kg, can always be placed exactly where you like it best.   Safety is also convincing: Good to know that the robust cool-touch plastic housing does not heat up even at the highest heating level. The internal heating elements do not transfer their heat energy to the casing or to the front or rear grille. This means you can touch the heater even after prolonged use without worry. The integrated tip-over switch protects against accidental tipping. The heating coil is automatically turned off as soon as the otherwise stable device is about to tip over. The fan also switches off shortly thereafter. At the same time, a beep sounds, signaling that the fan is no longer in an upright position. In addition, it features overheating protection and a fan after-run function that blows the remaining residual heat out of the device after heating. Better safe than sorry.   Quieter than expected: The powerful Turbospin technology operates surprisingly quietly. The pleasantly soft, sonorous base noise of the outgoing airflow is easily overlooked. This way, you can enjoy warmth or cooling in the bedroom or, for example, while watching television, without being distracted by loud background noise.   Automatic Thermostat Control: The temperature setting can be adjusted in 3-degree increments from 18 °C to 30 °C on the clearly designed control panel. Once set, the automatic thermostat takes over the temperature regulation. When the desired target temperature is reached, the heating device switches off until reheating is required again. This is not only convenient but also reduces energy consumption.      Advantages for Practice   • 2-in-1 combination device: heater and fan• Up to 2000 watts heating power for quick and pleasant warmth• Optimal heat circulation through TurboSpin technology – resulting in wide distribution of warm air• Flexibly usable in summer and winter months• Particularly quiet• Ventilator function with 2 cold settings• 2 heating levels (1200 W/2000 W)• Temperature control from 18 °C to 30 °C• Automatic shutdown upon reaching the set temperature• Cool-touch housing – the outer plastic parts do not heat up• Overheat protection• Integrated tilt protection switch in the device• Fan run-on function• LED-Display• Operating control light• Secure footing• Energy efficient   Please note • The ERP table for this heating device can be found in the "Documents" section.• The device is only suitable for use in well-insulated rooms or for occasional use.        Technical data 204.51 m3277,28 m3 /h /h heating capacity 1200 / 2000W Heizart Fan with switchable heating Maximum room size 24 m² (60 m³) Adjustable Temperature 18 - 21 - 24 - 27 - 30 °C Suitable ambient temperature 0 - 35 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 8.7 A Power consumption max. 2000W Recommended Coverage 10 A Cable length approx. 1.60 m Plug EU plug with Swiss adapter Dimensions W x H x D 255 x 250 x 185 mm Weight 2 kg Protection class II on/off switch and thermostat control and LED-Display and Frost Watch Function no Automatic shutdown at target value and parental controls no Timer no oscillation no anti-tip device and Operating noise at a distance of 1m Operating noise at a distance of 2.5m max. 53 dB(A) strong ventilation level max. 50 dB(A) strong ventilation level fan speeds 2 air volume level 1 air volume level 2 204 m³ / h 277 m³ / h guarantee 2 years

Learn more More Fewer

High-quality floor fan made of robust metal and the rotors (45 cm diameter) made of aluminum. The fan head is vertically adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a practical carrying handle, and a good price-performance ratio.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Large fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's airflow direction is continuously adjustable horizontally by 110°.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.50 m length• No assembly required, the fan is ready to use immediately.• RoHS and CE compliant• Suitable wall/ceiling mount available as an accessory  Technical data  Power consumption max. 100 Watts Rotordurchmesser 45 cm airflow Up to 5414 m³/h air speed max. 3.8 m/s Noise (our measurement)     1 m distance Step 1-3: 61-65 dB(A) 2.5 m distance step 1-3: 57-61 dB(A) speed levels 3 Revolutions Level 1 / 2 / 3:  900 / 1150 / 1300 per minute Cable length approx. 1.50 m Connection EU plug with suitable fixed adapter for Switzerland (230V) Dimensions ( W x H x D ) 540 x 535 x 180 mm Weight 4.5 kg Trotec article no. 1.510.006.031 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

This data logger enables precise measurement and continuous documentation of climate data over long periods. With an impressive storage capacity of up to 32,000 measurement values, you can individually set the measurement cycle and the timing of data collection, thus tailoring it exactly to your needs. To ensure the integrity of the recorded data, the data logger is supplied with a lockable wall mount. This effectively protects the device from unauthorized access and tampering. Since the configuration of the data logger is carried out exclusively via a PC, unauthorized changes to the settings directly on the device are excluded. The evaluation and configuration of the recorded data can be conveniently done using the freely available MultiMeasure Studio software (STD). For more demanding analyses, the optional professional version of the software offers additional features, such as exporting data to Excel spreadsheet format or creating automated reports for comprehensive evaluation.Application examples • Proof of inspection obligation for craftsmen• Determination of causes of mold and moisture damage• Logging of climate data in archives and storage rooms     Scope of delivery   • Measuring device • Battery • PC analysis software • lockable wall mount • User manual • USB-Cable     Technical data   Measurement range air temperature -40 °C to +70 °C (-40 °F to +158 °F) Resolution Air Temperature 0.1 °C Accuracy Air Temperature max. ±1 °C Measuring range relative humidity 0 % r.H. to 100 % r.H. Resolution relative humidity 0.1 % r.F. Accuracy relative humidity max. 3 % r.F. Measured value memory total 32,000 measurement values16,000 for temperature and humidity Temperature display in °C and °F Dimensions L x W x H 94 x 50 x 32 mm Weight 91g including batteries Functions • Display of Maximum Value + Minimum Value• Display of date and time• Alarm function• freely selectable measurement cycle from 1 second to 24 hours• Permanent or ring recording  Trotec article no. 3.510.205.520 Guarantee 2 years

Learn more More Fewer

This electronic moisture indicator allows for precise depth measurement of moisture in solid materials such as masonry, concrete walls, and floors up to a depth of 4 cm. This is particularly useful for quickly locating water damage after a pipe break or for easily monitoring the drying progress of subfloors. Thanks to the dielectric measurement method, moisture measurement is completely non-destructive, without the need to insert electrodes or probes into the material being measured. The reaction time is less than one second, so results are available almost immediately. At the push of a button, additional information such as minimum and maximum values can be displayed on the easily readable, backlit display. Furthermore, the device features a hold function, allowing the current measurement value to be easily retained.     Functions   • Minimal and Maximal Value Display• Hold Function• Illuminated Display• Automatic switch-off     Advantages at a Glance   • Fast and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Minimal value, maximal value, and hold function• Automatic function and battery test• Ready to use• Optimal price-performance ratio• Illuminated Display• Automatic switch-off    Scope of delivery   • Measuring device• Battery• User manual     Technical data   voltage 9V Battery Measuring range digits 100 Resolution and Accuracy 1 Digit Messprinzip dielectric / capacitive Penetration depth 5 - 40 mm (non-destructive) Ambient temperature 0 - +50 °C ambient air humidity 0 - 80 % r.F. Dimensions L x W x H 180 x 35 x 45 mm Weight 180g Trotec article no. 3.510.205.031 Guarantee 2 years  

Learn more More Fewer

This compact pocket-sized pH meter proves to be a versatile tool suitable for both hobbyists and professional applications. It is ideal for aquarium and plant enthusiasts as well as pool owners, but also for quality control in the beverage and food industry or for quick and reliable water testing. In particular, in natural ponds, which have become increasingly popular in recent years, regular monitoring of the pH level allows for the avoidance of unexpected changes. Due to rain or the refilling with tap water, the pH level can easily shift into the acidic or basic range, which can negatively affect the health of the fish. "In swimming pools and private swimming pools, monitoring the pH level is essential to protect the health of bathers and to extend the lifespan of pool materials." Thanks to the automatic temperature compensation and auto-calibration, the measuring device allows for a quick and precise determination of the pH value in the range of 0 to 14 at temperatures between 0 and 50 °C. The device features a factory 3-point calibration that can be easily repeated if necessary. The measurements are displayed on a clearly readable two-line display, which simultaneously shows the pH value and the water temperature. The replaceable pH electrode and the water temperature sensor are protected by a protective cap, and a hold function makes it easier to read the measurements. An automatic shut-off contributes to energy savings.     Advantages at a Glance   • Two-line display for simultaneous display of pH value and water temperature• Automatic Temperature Compensation (ATC) for accurate measurements at different temperatures of the liquids to be tested.• Factory 3-point calibration• Auto-calibration for pH 4.01/7.00/10.01• Easy to replace pH electrode• Automatic switch-off• Message retention function• Optimal price-performance ratio• Including pH buffer solution set (4.01/7.00/10.01) and protective cap   Note: The device is already factory calibrated using a high-concentration salt solution. This often leads to the formation of salt crystals on the diaphragm electrode (fiber bundle) in practice later on. The visible residues are completely normal for pH measuring electrodes of this type."They are harmless to the electrode, can be easily rinsed off with water, and therefore do not constitute a quality defect."     Scope of delivery • Measuring device • Batteries • Operating instructions • pH buffer solution set (4.01/7.00/10.01) and protective cap     Technical data   voltage 4 x flat batteries LR44 Display LCD PH value Measuring range: 0 - 14 pHResolution: 0.01 pHAccuracy ±: 0.03 pH Temperature Measuring range: 0 to 50 °C / 32 to 122 °F Accuracy: approx. ± 0.8 °C / ±1.5 °FResolution: 0.1 °C / 0.1 °F Ambient temperature 0°C to +50 °C humidity 10 - 85 % r.F. Dimensions L x W x H 188 x 38 x 38 mm Weight 83g Protection class IP65 Guarantee 2 years

Learn more More Fewer

"Its professional features make this robust clamp ammeter a reliable and perfect measuring device for both home users and electricians, craftsmen, and service technicians. Quickly and easily, you can measure AC voltages in electrical conductors without having to turn them off, or check DC networks in automobiles." With this compact clamp, you are always on the particularly safe side when measuring alternating current up to 750 volts. Because with the clamp, you encircle the electrical conductor, and the measuring device detects contactlessly by measuring the electromagnetic field whether voltage is present. Through this 'galvanic isolation', you avoid any direct contact with the circuit being measured, making it possible to conduct tests on live systems. "In addition, the testing device allows you to measure currents up to 1000 A in both direct and alternating current ranges, as well as to determine direct voltage up to 1000 volts, both of which can be set via manual or automatic range selection. This makes it ideal for passionate car enthusiasts and professionals in the automotive sector, as it can also be used to check the direct current network in a car."  With a turn to the next measurement The device features all common standard measurement functions such as resistance, duty cycle, and frequency measurement, which you can conveniently select using the practical rotary switch. You can read further information on the LCD display: the bar graph indicator shows you how close you are to an electrical conductor or its electric field. The diode tester and continuity test also allow you to reliably check, for example, the electrical system of a vehicle.  With the equipment of a true professional All measurement results are displayed on the backlit 1.8-inch LCD screen. Additionally, the clamp ammeter scores with features such as the HOLD function, as well as indicators for polarity and overload, and a MIN/MAX display. Furthermore, the battery-saving automatic shut-off and a low battery capacity indicator also ensure trouble-free use of the device, just as the integrated LED light between the two clamp jaws enables safe operation even in poor lighting conditions.  Advantages at a Glance • 3 5/6 digit LCD display (max. display 9999)• Robust housing• CAT III 1000 V / 750 V• AC measurement up to 1000 A• Direct current measurement up to 1000 A• AC voltage measurement up to 750 V• DC voltage measurement up to 1000 V• Highest resolution in the milliampere range• Non-contact detection of alternating current• Resistance measurement• Taste ratio measurement• Frequency measurement• Continuity test and diode test• Polarity indicator• Overload protection• Display when battery capacity is low• Automatic and manual range selection• Message retention function• Display lighting• Bar graph indicator• Integrated white light LED for work in poor lighting conditions• Suitable for pipe diameters up to 38 mm• Battery-saving automatic shut-off• Including storage bag• Optimal price-performance ratio     Features   • Message retention function • automatic range selection • Display of measurement range exceedance • Measurement of direct current, alternating current, direct voltage, alternating voltage, capacitance, frequency, duty cycle, and resistance • Automatic switch-off • backlit display• Diode test• Continuity test • Battery status display • integrated LED lamp     scope of delivery   • measuring device• Batteries• Bag/Holster• Safety measurement leads with test probes• User manual     Technical data Direct current (V/DC)• Measurement range: 6-1000 V• Accuracy ±(%)(6 V / 60 V / 600 V): ±(0.8 % +5)• Accuracy ±(%)(1000 V): ±(1.0 % +5)• Accuracy ± (%): 0.8 % direct current (A/DC)• Measurement range: 6-1000 A• Accuracy ±(%)(60 A): ±(0.3 % +10)• Accuracy ±(%)(600 A /1000 A): ±(3.0 % +6)• Accuracy ± (%): 3.0 % Alternating Voltage (V/AC)• Measuring range: 6-750 V• Accuracy ±(%)(6 V): ±(0.8 % +5)• Accuracy ±(%)(60 V / 600 V / 750 V): ±(1.2 % +5)• Accuracy ± (%): 1.2 % alternating current (A/AC)• Measurement range: 60-1000 A• Accuracy ±(%)(6 V): ±(0.8 % +5)• Accuracy ±(%)(60 V / 600 V / 750 V): ±(1.2 % +5)• Accuracy ±(%): 2.5 %• Accuracy ±(%): ±(2.5 % +6) Resistance (?)• Measuring range: 600-60 M• Accuracy ±(%) (600 ? / 6 k? / 60 k? / 600 k?): ±(1.0 % +5)• Accuracy ±(%) (6 M?): ±(1.5 % +5)• Accuracy ±(%) (60 M?): ±(3.0 % +10)• Accuracy ±(%): 3 % frequency (clamp)• Measurement range min.: 40.0 Hz - 99.99 Hz• Measurement range max.: 100.0 Hz - 999.9 Hz• Accuracy ±(%): ±(1.0 % +5) Frequency (with test cables)• Measurement range: 9.999 Hz - 9.999 MHz• Accuracy ±(%)(9.999 Hz / 99.99 Hz / 999.9 Hz /• 9.999 kHz / 99.99 kHz / 999.9 kHz): ±(1.0 % +5)  Taste ratio (Duty Cycle) • Measurement range: 5- 95 %• Accuracy ±(%): ±(2 % +7)   capacity • Measurement range min.(nF): 40 nF• Measurement range max. (µF): 40 µF• Accuracy ±(%)(40.00 nF / 400.0 nF / 4.000 µF / 40.00 µF / 400.0 µF): ±(5.0 % +5)   • Display: LCD 3 5/6 digit• Maximum conductor diameter: 38 mm• Opening plier diameter: 50 mm• Connection sockets for 4 mm safety plugs: 2• Measuring circuit category: CAT III (1000 V)• Protection class: IP20• Conformity: EN 61010-1 Contamination degree 2• Battery type: 3 x 1.5 V, AAA• Ambient temperature (operation): 0 °C to 40 °C   warranty 2 years   Trotec Article No. 3.510.205.244  

Learn more More Fewer

The hose is particularly suitable for our devices in construction drying and water damage restoration. It is durable, vacuum-resistant, and has good pressure resistance. Also available in 51mm diameter.  scope of delivery 15m hose reel, black (also available in yellow on request)Technical data  Suitable temperature range 0 to +85°C length extended 15 m diameter 38 mm Material two-layer spiral hose with wire spring Bending radius 38 mm Trotec article no. 6,100,001,010 black guarantee 2 years

Learn more More Fewer

This sensor is an electronic moisture indicator that non-destructively measures the capacitive moisture in solid materials such as walls, floors, or ceilings up to about 3-4 cm deep. The measuring device is ready for use immediately, can be easily connected with the app, and allows you to quickly and easily locate surface moisture distributions. "Not only is the quick indication of various surface moisture values possible, but this sensor is also particularly well-suited for the preliminary assessment of the readiness of building materials in CM measurements."  Extended evaluation and functionality thanks to the app Compared to non-app-supported moisture measuring devices, users of this device benefit from numerous additional advantages in terms of flexibility, analysis functions, data control, and documentation with the free app "Multimeasure Mobile." Compare different moisture measurements of an object, which were taken at different times, directly in the app. Or use the measurement values in combination for differentiated analyses directly on site. Useful additional features such as the alarm function, the export of moisture measurement values to further analysis software, and the creation of a report complete the universal application possibilities of the BM31WP and make this measuring device a valuable tool in the field of structural diagnostic tasks. With the MultiMeasure Mobile App, not only can the MIN, MAX, and average values be displayed automatically or individual measurement values marked directly in an image, but also elaborate graphical representations in the form of a photo-linked moisture matrix can be created, saved, and sent. The grid to be measured can be overlaid with a real image and later output as an overlay graphic with the moisture matrix for documentation – for example, for your measurement report, which you can generate and send directly on-site from the app.  What is an AppSensor? Trotec appSensors are compact precision measuring devices with high-quality sensors, designed to save energy and space, and do not have evaluation electronics or display units, as operation and data evaluation of the devices are almost entirely handled via the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages.   App "Multimeasure Mobile" "MultiMeasure Mobile" offers a variety of advantages for you: • Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Measurement display numeric or as diagram / matrix• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud   Your mobile device becomes a multifunctional measurement data manager. All app sensors are automatically recognized and can be connected and read via Bluetooth with the app. The operation is as simple and intuitive as the installation.    Advantages at a Glance • Quick and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Professional sensor technology for precise measurement results• Easy app connection via Bluetooth with optical connection confirmation via LED on the device• Wireless measurement device control and data display via app• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device.• Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Wrist strap for secure handling included• Automatic switch-off Trotec appSensors house professional sensors for precise measurement results, specifically developed for this purpose. Therefore, for professional measurements, use the clever combination of appSensor and MultiMeasure Mobile – the free app available for iOS and Android.  scope of delivery  • measuring device• Batteries• Hand strap• User manual     Technical data   Measuring range 0 - 100 Digits resolution 0.1 Digit Messprinzip dielectric / capacitive Ambient temperature 0 °C to 50 °C ambient humidity 10 - 90 % r.H. (Storage: max. 80% r.H.) Bluetooth 4.0 (BLE), max. 10 m transmission range in open area Masse (L x B x H) 160 x 36 x 22 mm Weight 93 g Trotec article no. 3.510.206.031 guarantee 2 years      

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be introduced through the edge strip or other joints after removing the bases. Comparable to the flat electrode pair M 6-Bi 200. • Isolated shaft to exclude surface moisture.• The electrode length is 200 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

This heater is characterized by its effective and rapid heat output, making it ideal as an additional heater for apartments or for general heating of poorly insulated rooms during the cool season. With a heating power of 2000 watts, it ensures pleasant comfort temperatures in rooms up to 24 m² or 60 m³. Whether in the living room, bedroom, children's room, in the holiday apartment, in the hobby cellar, party room, office, sales room, or conservatory – this heater creates a cozy atmosphere everywhere.     Perfect combination of convection heat and infrared radiation   Unlike many other heating devices or heaters, the heat from this heat wave heater is not only emitted from one direction into the room. Instead, the combination of convection heating and mica infrared heating elements ensures that the heating is felt all around. Furthermore, the heating elements heat up particularly quickly, so that the heat output is noticeable within just a few seconds. It is best to place the device in the middle of the room so that you can benefit from the even and rapid 3D heat distribution. Further down, you will learn more about the operating principle of the heat wave heater.     Thermostat control for high comfort and low energy consumption   With the remote control and the intuitive membrane button control panel, you can quickly and easily select 2 heating levels (1200 watts and 2000 watts). The current room temperature is always displayed on the LCD screen.   You can optimally adjust the heating power to your room temperature thanks to an intelligent temperature control via thermostat. Simply enter your desired target room temperature in the range of 15 °C to 35 °C. The heating will warm the room until the selected temperature is reached and then automatically switch off. As soon as additional heating is required, the operation will automatically restart, ensuring that the room temperature is kept constant. This process is particularly efficient and energy-saving because only as much heating is provided as necessary to ensure a pleasant feeling of warmth.     Quiet and dust-free warmth   This model operates without a fan blower, unlike electric heaters, and therefore does not stir up any dust in the room. This is particularly pleasant not only for allergy sufferers and asthmatics. Additionally, it generates its heat completely silently, making it suitable for use in the bedroom, for example. This way, you can sleep comfortably and restfully even in rooms that have become very cold, such as when you spend the first night in a holiday home that has not been used for a long time.     Timer function – programmable on and off switching   Equally comfortable and energy-saving is the practical 24-hour timer of the comfort heater. If desired, the device can be automatically turned on or off after a set time (1-24 hours). For example, you can set it so that the heater in the bedroom turns off by itself after you have fallen asleep. Or you can preheat the kitchen in the morning so that you can enjoy your coffee in warmth.     Lots of security   "For safe heating operation, the heat wave heater is equipped with an overheating protection that automatically switches off the device when there is a risk of overheating. It is also well protected against accidental tipping, e.g. by pets, careless guests, or rambunctious children, as the integrated tilt switch immediately deactivates the operation in case of an incline."     How do these infrared heaters work?   The 3D heating system of this heater cleverly combines the advantages of a convector and an infrared heater, providing real all-around warmth in no time:    Efficient Mica Heating Technology with Mica Plates: The 3-layer mica heating plates made from natural mica ore generate a pleasant infrared radiant heat in no time, which, unlike conventional heaters, is emitted not only from one direction but simultaneously forwards and backwards. Another advantage of the high-quality mica heating elements is their full-surface and uniform heating. The intense radiant heat is generated over the entire surface, without loss of power and without consuming oxygen. Additionally, warm air also rises from the hot mica heating elements. This creates a gentle airflow that further distributes the heat throughout the entire room. This principle is called convection.   Space-filling warmth based on the principle of the sun: Infrared radiation works according to the natural principle of the sun. It does not heat the air, but rather the surfaces of the objects it encounters. The objects store the heat and gradually release it back into the room, so that the warmth continues to linger even after the infrared heater has been turned off. On the skin, infrared radiation creates the pleasant sensation of natural sun warmth.   Advantages: The soothing warmth takes effect immediately and without any warm-up time throughout the entire room and does not need to be transported by the circulating room air. Together, the infrared radiation and convection heat complement each other to create a three-dimensional all-around heating system. The heat radiated upwards, forwards, and backwards uniformly warms the entire room. For quick comfort warmth throughout the room – even into the farthest corner.     Healthy indoor climate Breathe Healthy with the Stop-DryAir Function: U You no longer have to worry about dry heating air. Unlike conventional heating techniques, where heating inevitably leads to a decrease in room air humidity, the heat wave heating principle keeps the existing air humidity in the room to be heated constant at the same level.   Especially during the cold autumn and winter months, cool temperatures are perceived as uncomfortable by the body. Then, the infrared heat settles on the skin like a soothing heat plaster. The circulation and metabolism are stimulated, which can in turn have a relieving effect on muscle pain and the musculoskeletal system.     Striking black design "The optics also play a big role, after all, the cool black infrared heater often takes center stage in your room. The high-quality workmanship and the robust retro charm of the black metal grid set a striking design accent in your room ambiance."     Rollbar, compact and easy to transport   Thanks to its compact dimensions, integrated smooth-running wheels, and practical handles, the heater can be quickly and easily moved or carried from one room to another. This keeps you flexible, allowing you to use it in the office, in living and commercial spaces, or for example in wellness areas. The integrated cable management ensures order during transport and storage, preventing tripping hazards.     Advantages at a Glance   • Up to 2,000 W heating power for clean, condensation-free, and odorless warmth• 2 heating levels (1200 W / 2000 W)• 3D Surround Heating System: Combination of infrared radiation and convection heat• High-quality mica heating technology with mica plates• Thermostat-controlled automatic operation with target value selection between 15 °C and 35 °C• Automatic temperature control• Current room temperature display• Stop-DryAir: no drying out of the room air• Timer Function• IR remote control• LCD-Display• Energy-efficient operation thanks to automatic shutdown upon target value achievement• Maximum safety thanks to overheating and tilt protection• Easy transport through handles and integrated wheels• Silent heating Please note: The device is only suitable for use in well-insulated rooms or for occasional use.     Technical data   Heating output 1200W / 2000W Heizart Convection and Infrared Heat Waves Maximum room size 24 m² (60 m³) Temperature range 15 - 35 °C voltage 220 - 240 V/50 Hz Nominal current consumption max. 8.7 A Power consumption max. 2000W Recommended Coverage 10 A Cable length approx. 1.2 m Plug EU plug with Swiss adapter Dimensions W x H x D 640 x 660 x 260 mm (including stand feet) Weight 5 kg Protection class IPX0 On/off switch yes, plus step switch 1200W - 2000W Thermostat control and LC-Display and Frost Watch Function no Automatic shutdown at target value and Parental controls no Timer yes (1-24 hours) Memory function yes (values are saved, operation on timer possible) Anti-tip protection and Overheating protection and Guarantee 2 years

Learn more More Fewer

As a thermal anemometer, this handheld measuring device impresses with high measurement sensitivity and is particularly suitable for the precise determination of even low flow velocities. It is ready for use immediately, can be easily connected to the app, and displays all measurement values on the mobile device. Through the clever combination of appSensor and the associated free app Multimeasure Mobile, users in practice benefit from numerous advantages in terms of flexibility, analysis functions, data control, and documentation. "Compare measured data directly on the mobile device or use the measurement values in combination for differentiated analyses on-site. The infinitely adjustable probe design in length and numerous useful performance features enable universal use for many measurement tasks." The logging function is helpful for long-term measurements, the graphical representation of your measurement data, or their export to further analysis software, as well as the possibility of creating a report. From performance monitoring of household appliances to climate and ventilation systems, to cooling fans in the IT sector, this measuring device is an ideal companion for flow measurements, even in hard-to-reach places.  App-Sensor Trotec app sensors are compact precision measuring devices. They feature high-quality, energy- and space-saving sensors. The display, operation, and evaluation of the data are done via the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages.   Advantages at a Glance   • Quick and easy measurement of air velocity, air temperature, and air volume flow (CMM)• Retractable, 375 mm long telescopic probe• High-quality sensors and numerous measurement functions• Professional sensor technology for precise measurement results • Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Intelligent combination of appSensor and the app MultiMeasure Mobile • Easy app connection and control via Bluetooth with optical connection confirmation via LED on the device• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device. • Automatic switch-off • Wrist strap for secure handling included   "MultiMeasure Mobile" – Free app for iOS and Android "For the smartphone operation of this appSensor, you need MultiMeasure Mobile – a free app for controlling, evaluating, and displaying measurement data from all appSensors connected to your mobile device from Trotec." MultiMeasure Mobile offers a variety of advantages for you:• Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Numeric or diagram/matrix display of measurement values?• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud  All app sensors are automatically recognized by "MultiMeasure Mobile" and can be connected and read via Bluetooth with the app. The operation is just as simple and intuitive as the installation. Simply download MultiMeasure Mobile for free to your mobile device.     Technical data   flow velocity Measuring range             0 - 30 m/s (Resolution 0.01) 0 - 67 mph (Resolution 0.01) 0 - 108 km/h (Resolution 0.01) 0 - 58 kn (Resolution 0.01) 0 - 5900 ft/min (Resolution 1.0)   temperature Measuring range     accuracy       -20 °C - +60 °C (Resolution 0.1) -4 °F - +140 °F (Resolution 0.1)   ±0.8 °C (-20 °C - 0 °C) ±0.5 °C (0 - +60 °C)   humidity Measuring range   accuracy       10 - 90 % r.H. (Resolution 0.1)   ±3.5 % r.F (20 % - 80 % r.F.) ±5 % r.H. (0 % - 20 % and 80 % - 100 % r.H.)   Bluetooth 4.0 BLE, 10 m range in open area energy supply 3 x 1.5V, AAA batteries Masse (L x B x H) Device 320 x 36 x 22 mm Telescopic probe extendable approx. 235 mm Weight 122 g Trotec article no. 3.510.206.043 guarantee 2 years

Learn more More Fewer

Cozy feel-good warmth   "As the days in the transition period to autumn/winter become colder, but the stationary heating system is still turned off for cost reasons, the ultra-flat design convector TCH 1510 E provides pleasant, odorless, and noiseless warmth for comfortably tempered rooms with its continuously adjustable heating power of 1500 watts via thermostat – whether you use it as a wall or standing device."     Stylishly shaped   A large-area and highly efficient aluminum heating element of approximately 55 cm in length, along with aerodynamically shaped air outlets on the top of the device, ensures rapid heat distribution in rooms up to 20 m² or 50 m³. Whether in a modern living environment, in office settings, in the bathroom, or even in unheated conservatories, garages, or holiday homes: wherever quick and/or additional heat is required, the design convector demonstrates its performance. It belongs to protection class IP24 (splash-proof) and is therefore also approved for damp rooms. However, please ensure that sufficient distance from water is maintained when installing in bathrooms.     Uniform convection heat   In the TCH series convectors, the air in the device is heated by electrically heated wires and consequently rises as warm air, creating a natural draft that draws in cold room air into the device. This creates a continuous circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus preventing overheating or underheating of individual areas. Once the preset temperature is reached, the device reduces its output and maintains the desired temperature.     Innovative window-open detection prevents energy waste   Regular ventilation is essential for a good and healthy indoor climate. To avoid unnecessary energy waste during ventilation, the device features an energy-saving window-open detection. When the window is opened, the convector reduces its heating output in thermostat-controlled automatic mode until the window is closed again. An automatic temperature control of the room temperature and an intelligent heat automation further reduce the already economical energy consumption. When the preset desired temperature (in the range of 0 to 50 °C) is reached, the heating element automatically switches off and only turns back on when additional heating is required. This keeps the energy consumption of the convector pleasantly low, and no expensive energy costs are thrown out the window.     Smart equipment for warm feel-good times   The comfort features of the design convector are rounded off by a room temperature and clock display, two operating modes (automatic and weekly mode), stable stand feet for flexible use in different locations, a wall mount, an operating hours display, and an extra-long power cable for maximum freedom of movement.     Cozy warm interiors with comfort   This heater operates with the effect of uniform convection heat and, like this, it can be used almost everywhere in private living environments or in offices: for example, as an emergency heater when the main heating fails, as a reliable transitional heater before the heating period begins, or for heating areas such as conservatories, garages, hobby rooms, or basement areas that are not connected to a central heating system.     Operating hours display – keeps consumption in view   "Whether as a tenant or landlord – it can occasionally be helpful to know how much heating costs have been incurred over a specific period. With the practical operating hours display, you can monitor and record consumption down to the hour."     Weekly mode – individual heating times and temperatures every day   Every day is different. On weekends, we usually spend more time at home, and accordingly, the heating demand is greater. A programmable weekly timer allows you to program individual heating times and room temperatures for each day of the week.   "More warmth on the weekend and less warmth during the week when you leave the house in the morning: In week mode, individual room temperatures and heating times can be assigned to each day of the week. Quite practical."     Child safety lock – for safe operation in the children's room   The child lock protects the device settings of the convector from curious children's hands. Once activated, the device settings can no longer be changed via the control panel.     Frost Guardian Function   Ideal for short-term property vacancies or spaces that are not constantly used. With the stepless thermostat control, you can also use the devices in frost protection mode. The heating device is then automatically activated via the thermostat to keep the rooms frost-free or to prevent excessive cooling. The TCH convectors are not only ideally suited for landlords or real estate companies as frost protection devices – they also provide a practical function for private individuals or businesses to keep vacant rooms or garages frost-free. In particular, rooms, conservatories, or basements that are not connected to central heating can be reliably kept warm in this way.     Advantages at a Glance   • Up to 1500 W heating power for clean, condensation-free, and odorless warmth• Large heating element of approximately 55 cm in length• Temperature range adjustable between 0-50 C°• Stepless temperature control• Innovative Window Open Detection• Automatic temperature control / Intelligent heat automation• Frost Guardian Function• Energy-efficient operation thanks to automatic shutdown upon reaching target values• Current room temperature display• Timer Function• Weekly timer• Operating hours display• LCD-Display• Parental controls• Overheat protection• Can be used as a wall or stand device• Frost Guardian Function   Please note • You can find the ErP table for this heating device in the "Documents" section. • The device is only suitable for use in well-insulated rooms or for occasional use. • The selectable temperature does not always correspond to what can be technically achieved. The larger the room and the lower the base temperature in the room, the fewer high temperature targets can be reached. For example, in a well-insulated room of 15 - 20 m², temperature targets of a comfortable 20 - 25°C should be easily achievable, whereas the maximum adjustable target of 50°C is not realistic with 1500 watts of power.    Technical data  heating capacity 1500W Heizart Convention Maximum room size 20 m² (50 m³) temperature range 0 - 50 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 6.5 A Power consumption max. 1500W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter Dimensions W x H x D 690 x 480 x 260 mm (including stand feet) Weight 6kg Protection class IP24 on/off switch and thermostat control and LC-Display and Frost Watch Function and Automatic shutdown at target value and parental controls and Timer yes (one-time, weekly timer, weekday timer) anti-tip device and Open-Window-Detection and guarantee 2 years

Learn more More Fewer

With this joint cross method, insulation layer areas under grouted wall and floor coverings can be dried without having to destroy the panels. Optimal for value preservation or for coverings that are no longer available, such as tiles or other grouted hard coverings. Unlike conventional distributors of this type, which have a hose connection at the head side, this system features a longitudinal hose connection for 38 or 50mm hoses. This leads to very favorable, low-turbulence pressure and flow conditions. Additionally, it offers the advantage that the system can be expanded arbitrarily for larger areas. Multiple systems can be connected using the optionally available coupling.scope of delivery • Aluminium distributor• 10 air hoses• 10 ground spikes   Technical data  air connections 1 air outlets 10 Masse (B x H x T) 250 x 38 x 100 mm Weight 660 g Trotec article no. 6.100.009.020 guarantee  2 years

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be inserted through the edge strip or other joints after the bases are removed. Comparable to the flat electrode pair M 6-Bi 300. • Isolated shaft to exclude surface moisture.• The electrode length is 300 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

This room hygrometer is suitable for humidity-dependent control of the TTK170ECO or other dehumidifiers with a 6.35 mm jack for external connection, for example for unattended drying processes where a target humidity must not be undershot (for instance, with fresh plaster or plastering work) or to reduce power consumption when a too low humidity is not necessary.    The HG 110 features a 6.35 mm jack plug, operates in the low voltage range, and is designed for a maximum load of 2 A. The three-meter long cable allows the measurement point to be different from the location of the dehumidifier.     application examples   It serves as a two-point controller for regulating relative humidity, for example, on indoor construction sites, in basements, in climate cabinets, or for controlled dehumidification of office and computer rooms. Other areas of application include storage for goods or food, cold storage for fruits and vegetables, greenhouses of horticultural businesses, textile industry, paper and printing industry, film industry, hospitals. Wherever humidity needs to be regulated or monitored, this humidity controller with the corresponding dehumidifier can be used.      Functionality and Installation Location   The installation location should be chosen in such a way that a representative measurement of humidity is ensured, i.e., the humidity measurement values at the installation location should correspond to those of the room, and the hygrometer should be in the airflow. The room hygrometer reacts quickly and accurately to changes in humidity. By adjusting the setpoint knob, the lever system is engaged in such a way that when the set humidity is reached, the internal microswitch is activated.     Technical data   Measuring range 40 - 90 % relative humidity Measurement accuracy +-3% suitable ambient temperature 0 - 60° C suitable ambient humidity 40 - 90 % Tension 24 V max. switching load 2 A Cable length 3 Meters connector 6.35 mm jack 1/4" Protection class IP20 guarantee 2 years

Learn more More Fewer

Reinforced and very flexible air transport hose with a variety of applications, for example in heating, ventilation, or in air conditioning technology. We recommend using the SP series air transport hoses in combination with the corresponding Trotec connecting fittings. application examples • Ventilation and exhaust in air conditioning and ventilation technology• Drying, remediation of water damage• Winter building heating, stable ventilation, hall and tent heating• Trade fair construction and events• Grain drying• Bulk loading• Tank venting and degassing• Silo emptying• Air showers at car wash facilities.• etc.  Technical data • Temperature range: -20 °C to +80 °C• Temporarily also loadable with hot air up to 100 °C• Particularly robust design made of reinforced, PVC-coated polyamide fabric• Bend-proof and tensile strength• Double-sided spiral-free couplings• With abrasion protection and integrated steel spiral underneath• Bending radius 0.5 x Ø• Standard length 7.6 m Trotec Article No. 6.100.001.214

Learn more More Fewer