Fast, precise moisture meter for detecting moisture in walls, ceilings, and floors. With this easy-to-use pocket-sized quick moisture indicator, you can quickly and reliably track your drying progress on construction sites or during the remediation of water damage.The electronic moisture indicator operates using a non-destructive measurement method based on the dielectric constant/high-frequency measurement principle. It has a spherical probe for detecting moisture and moisture distribution in solid building materials such as walls, ceilings, and floors (suitable for measuring wood only to a limited extent and as an indicator).Application"First, the desired material is selected on an LCD display and saved by pressing a button. Then, the metal ball is held at a right angle to the material to be measured, and the measurement button is pressed briefly. The result is immediately visible."   Handling of a ball measuring electrode  It is important to have a 90° angle to the measurement object as well as the correct positioning of the hydrometer/electrode. To avoid any influence from the hand of the person measuring, the electrode may only be covered by the hand on the rear half during the measurement and control process. The front half (display/sphere) of the device must remain free.       Proper handling of the device: Always hold the device firmly at the lower part of the housing during measurements:     Incorrect handling of the device: When measuring, the hand affects the measurement field of the ball electrode and thereby alters the measurement value.      Selectable Material Table• Display in digits• Cement screed in weight %• Anhydrite content in weight %• Concrete in % by weight• Cement mortar in weight %• Lime mortar in weight %• Mischputz in Gew %• Gypsum plaster in % by weight• Cement screed in CM %• Anhydrite screed in CM %• Gipsputz in CM %• Lime mortar in CM %• Cement mortar in CM %• Mixed plaster in CM %• Beton in CM % Weight %: The material moisture in weight percentages (also solid moisture) indicates the absolute proportion of free water contained in a solid in %. Values in the range of 0.2 - 0.3 % indicate dry materials.CM %: The displayed CM value simulates the extraction and measurement of a material sample in the manometer, where the sample is mixed with calcium carbide. This produces a gas, the pressure of which is measured. Depending on the material density, the value is very similar to weight %. For anhydrite, 1 weight % = about 1 CM%. For concrete floors, the CM value deviates more significantly: 1 weight % = about 1.5 CM%. Dry concrete floors/walls should have CM values below 2.0% (calcium sulfate or anhydrite screed: below 0.3%).Thus, the weight percentages are the more easily understandable value for non-specialists.Advantages and Features• Handy moisture meter in pocket format for quick individual and series measurements• For each building material, a limit value can be individually set, exceeding which an acoustic warning signal will sound.• Scan mode (1 - 199.9 digits) or direct display of moisture values in % by weight or CM-% for building materials, resolution: 0.1 %• Characteristic curves for 7 types of building materials• Min, Max, and Hold function for the measured values• Automatic calibration when the device is turned on• The device is delivered complete with a 9V battery and plastic box.Improvements compared to the previous Hydromette BL Compact BThe BL2 is the further development of its predecessor Gann Hydromette BL Compact B.• Longer measuring probe for more comfortable application• Significantly stronger high-frequency measurement field for greater penetration depth into the building material• Finer measurement resolution now from 0-199 digits for an even more precise delineation of moist areas, which was previously only possible with significantly more expensive measuring devices.• the direct display of the CM % has been expanded to include several building materials. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 30012032 Measuring range:   0 – 199.9 Digits (Scan Range) 0.3 – 6.0 wt.-% or 0.3 – 4.0 CM-% measuring depth: max. approx. 6 cm Advertisement: Device/ambient temperature Trend indicator: hardwood and softwood Max-Hold function: Yes Alarm function: Acoustically Calibration: Automatically Device shutdown: Automatically Single or series measurements: In seconds Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 190 x 50 x 30 mm Weight: 180 gr. Special features: No separate electrodes or cables required Ideal pre-testing device for all CM devices Guarantee: 2 years                      Further Gann measuring devices "We are an official sales outlet for Gann measuring devices in Switzerland and can offer you all Gann articles under advantageous conditions, for example: Gann Hydromette HB30, HT65, HT85 T, UNI1, UNI2, RTU600, CH17 and many more."

Learn more More Fewer

Precise thermo-hygrometer for quick measurements of relative humidity and temperature in cavities"Using fixed programmed sorption isotherms, weight or mass percentages can be determined for various construction and insulation materials as well as for hard and soft woods. The measuring device has a thin, flexible probe tube (gooseneck) and is therefore particularly suitable for moisture analyses, e.g. damage assessment or building drying. The testing of the readiness for installation of floor and wall coverings is also among the possible areas of application."   Features and Benefits• Handy quick moisture meter in pocket format for lightning-fast single or series measurements• Simultaneous display of up to three measurement values on the 3-line LCD display, resolution: 0.1 % or 0.1° C• Automatic calculation of the dew point temperature, the wood moisture equilibrium (UGL) *, the absolute humidity in g/m³, the enthalpy in kJ/K, the wet bulb temperature in °C, and the water activity (aw)• Sorption isotherms for hardwood and softwood as well as for 10 different types of building materials• Min, Max, and Hold function for the measured values• Storage of the 5 most recently recorded measurement values• Automatic device shutdown     Further detailsThe Hydromette Compact RH-T Flex is also available with a longer gooseneck (350mm instead of 250mm).The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data   Gann Article No.: 31013142 Measuring range: Air humidity: 0 – 100 % r.H. ± 1.8 % r.H. (10 – 90 % r.H.) Air temperature: -20 to +70 °C ± 0.5 °C (-10 to +70 °C) sensor tube: 250 x Ø 6.5 mm (gooseneck) Advertisement: Device/ambient temperature Automatic saving: last 5 measurements Calibration: Automatically Device shutdown: Automatically Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 175 x 50 x 30 mm Total length with probe approx. 440mm Weight: 180 gr. Special features: No separate electrodes or cables required 9V block battery included Guarantee: 2 years

Learn more More Fewer

The UNI 1 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected. It can measure the ranges of building moisture, air humidity, and temperature.'The UNI1 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'   • B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.• MB 35 for surface moisture measurement on concrete• MH 34 for measuring high moisture values (40–200%) in softwood• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and• all Pt 100 temperature sensors"We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.Characteristics• Handy quick moisture meter for lightning-fast single and series measurements• Direct display of moisture values on the large LCD display, resolution: 0.1 digit• Quick measurement of moisture in set building materials using the capacitive high-frequency measurement method• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology• Fully automatic device synchronizationscope of delivery The delivery includes the base station Uni1 without any additional accessories. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data  Gann Article No.: 30001430 Device comparison: Fully automatic Single or series measurements: in a matter of seconds Power supply: 9-V-Block battery (included in delivery) or Ni-Cd battery (special accessory) Dimensions (L/W/H): 140 x 90 x 42/50 mm Weight: 230 gr. Guarantee: 2 years

Learn more More Fewer

The active electrode B 50 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds. It detects the moisture distribution in ceilings, walls, concrete, and other set building materials.   The following measurement ranges are covered by the B 50• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via tableSuitable base devicesThe electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in dealing with moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a supplement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 31003750 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

The active electrode B 60 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds."It detects the moisture distribution in ceilings, walls, concrete, and other set building materials. The basic function is the same as that of the probe B50; additionally, the B60 features a built-in limit value setter from 20 – 140 digits and an acoustic signal generator."   The following measurement ranges are covered by the B 60• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via table Suitable base devices The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 31003760 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

The active electrode RFT 28 EL is a sensor for measuring air humidity and air temperature with a fast measurement speed. It is an addition to one of the Gann-Hydromette base stations listed below and cannot be operated independently of them.The fast response speed of the sensor allows for the detection of leaks, e.g. door gaps or leaky windows, as even slight air currents can influence the measurement display. The sensor also adapts to the ambient climate even when switched off. For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out.    Suitable base devices  The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2   The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data Gann Article No.: 31003155Measuring range humidity: 7 - 98 % r.H.Measuring range air temperature: -10 - +80 °CMeasurement tolerance humidity: ± 1.8 % (at 10-90% r.H.)Measurement tolerance air temperature: ± 0.75 °C (-10 to +55 °C) The response time of the air humidity sensor (slightly moving air, ambient temperature: 20 - 25 °C) is 20-30 seconds depending on the humidity difference.Warranty: 2 years  

Learn more More Fewer

The RHT 37 BL 160 is an electrode for measuring air humidity and air temperature - specifically suitable for use in bulk materials and solids (e.g. masonry or screeds). Its areas of application include moisture analysis, damage assessment, monitoring of construction drying, as well as testing the readiness for installation of floor and wall coverings.The sensor tube has a diameter of 5.5 mm, which also allows measurements in joints without having to risk damaging wall or floor tiles. "In conjunction with a hydrometer, the air humidity in the borehole can be measured and the degree of saturation or moisture content of certain set building materials can be determined using sorption isotherms." "For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out."Suitable base devicesBL UNI 11CH17

Learn more More Fewer

The measuring cable MK 8 is an accessory for resistance-based measuring devices from Gann. It connects the base device with the corresponding measuring electrodes such as M6 and others.Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250  Suitable base devices• Hydromette BL E, BL H 40, BL H 41, BL HT 70, H 35, HB 30, HT 65, HT 85 T, M 2050, M 4050, RTU 600, UNI 2  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data  Gann Article No.: 31003750 Length: 1 m

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The M6 insertion electrodes are accessories for Gann professional measuring devices such as Uni2 and all hydrometers that are based on the resistance measurement method. The electrodes are always used in pairs. They measure the resistance between the two insertion tips, which should ideally be inserted into the test material at a distance of about 8 - 10 cm from each other.The M6 is suitable for measuring hard bound building materials (e.g. concrete or screed). "For use, you need a basic measuring device such as Uni1 or Uni2 as well as a measuring cable MK8. The delivery includes 10 electrode tips of 40 and 60 mm length each. The M6 also serves as a carrier for other electrode pairs:"Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250Suitable base devices• Hydromette BL E, Hydromette HB 30, HT 85 T, M 4050, RTU 600, UNI 2 The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 310037002 carrying handles, incl. 10 electrode tips of 40 and 60 mm

Learn more More Fewer

The M 20 is a penetration electrode for measuring wood moisture and construction moisture. It is based on the resistance measurement principle and can be connected to all corresponding "Gann" measuring devices. The electrode is suitable for moisture measurements of sawn timber (up to 50 mm thickness), chipboard and OSB boards, and parquet. With the help of a suitable striking device (e.g. hammer), the electrode can also be driven into hard woods such as beech. It is also applicable for measurements in soft bound building materials (e.g. plasters, gypsum, or aerated concrete) as well as insulation and insulating materials. Matching electrode pairs• M20-HW200, M20-HW300• M20-DS16, M20-DS16-i, M20-OF15• M20-Bi 200 and M20-Bi 300• M6-150 and M6-250Suitable base devices• Hydromette BL E• Hydromette HB 30• HT 85 T• M 4050• RTU 600• IT 2     The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 31003300Electrode M20 incl. 10 electrode tips of 16 and 23 mm 

Learn more More Fewer

Ideal case for storing and transporting Gann measuring devices such as hydrometers and Hydromat CM devices. With specific inlays and padding.For storage / for transport of GANN hydrometers + accessories with specific inlays and padding. • For all Classic or BL hydrometers• Designed for a measuring sensor and various resistance-based electrodes The manufacturer Gann from Germany is one of the leading producers of high-quality moisture measuring devices. Gann measuring devices are very commonly used by professionals in construction drying. An ideal companion on construction sites for construction managers, architects, and floor layers.     scope of deliveryThe delivery includes the padded but unfilled case without devices.   Technical data  Gann Article No.: 31005061 Length: 0.437 m Width: 0.379 m Height: 0.100 m Weight: 1.530 kg

Learn more More Fewer

Ideal case for storing and transporting Gann measuring devices such as hydrometers and Hydromat CM devices. With specific inlays and padding.The delivery includes the padded but unfilled case without devices. • For all Classic or BL hydrometers• Designed for up to three measuring sensors and various resistance-based electrodes The manufacturer Gann from Germany is one of the leading producers of high-quality moisture measuring devices. Gann measuring devices are very commonly used by professionals in construction drying. An ideal companion on construction sites for construction managers, architects, and floor layers.  Technical data  Gann Article No.: 31005062 Length: 0.497 m Width: 0.411 m Height: 0.120 m Weight: 1.910 kg

Learn more More Fewer

The replacement measuring cable Gann MK13/II is a universal spare part for Gann measuring probes, which are connected to the Hydromette Classic measuring devices."It is compatible with B50, B60, LB70, MB35, MH34, IR40EL, RF-T28, RH-T37EL as well as with all PT100 temperature sensors."Important: the cable is not ready to plug in, but the wires must be soldered to the corresponding connections when replacing.   "Factory-wise, the individual wires of the current series are connected to these poles (IMPORTANT: we do not guarantee that this arrangement is correct for your device!)."1 braun2 weiss3 rosa4th degree5 yellow6 green7 blue 

Learn more More Fewer