These easy-to-install stand feet made of aluminum are suitable for the smaller heating plates of the TIH-S series (300S/400S).  The aluminum feet are designed to maintain the optimal distance from the wall when positioned along a wall, ensuring air circulation and the efficiency of the panel. Which models do these feet fit? The frame of the heating plates has the same thickness for all TIH-S models. Therefore, these feet fit all sizes. However, for better stability, we recommend using the slightly larger black feet starting from TIH500S and above.     Product details   • Material: anodized aluminum• Can be used in any room• Easy installation• Maintenance-free• Usable for the heating plates TIH 300 S and TIH 400 S • Scope of delivery: 1 pair (=2 pieces)   Trotec Article No. 1.410.003.001

Learn more More Fewer

Thermostat plug for controlling dehumidifiers, air conditioning units, and heatersThe external hygrostat plug DST interrupts or allows current depending on the room temperature (functioning similarly to a timer, but temperature- not time-dependent). This allows you to automatically turn off dehumidifiers as soon as the room temperature becomes too cold (min. 5°C) or switch to the reverse function at the push of a button to control heating when the room temperature is too low (maximum 3680W).By pressing a button, it can be selected whether the plug allows power when the temperature is higher than the set value (application example: dehumidifier, air conditioning units) or when the temperature is lower than the set value (application example: fan heater, frost guard, etc.).Advantages of the thermostat plug DST:1. Protection against icing of dehumidifiers in unattended operation in cold or highly fluctuating temperature environments2. Temperature regulation of fan heatersFunctioning of the control of dehumidifiers:The thermostat plug DST displays the room temperature. In dehumidification mode, you enter the desired minimum temperature to which your dehumidifier is set. If the current temperature is lower, the power is interrupted and the dehumidifier pauses until the room temperature rises again (lowest selectable value 5°C). Once the minimum temperature is reached, the plug supplies power to the dehumidifier again, allowing it to resume operation.Functioning of the control of heating fans:The Hygrostat Plug DST displays the room temperature. In heating mode, you enter the desired minimum temperature that must not be fallen below in the room (lowest selectable value 5°C). If the current temperature is lower, the plug continues to supply power to the heater until the desired target temperature in the room is reached."Why does the control usually only work with dehumidifiers that have manual control?""Dehumidifiers with electronic control fall into standby mode during a power interruption (except for some industrial devices with memory function) and must be restarted after the power interruption. Therefore, the DST plug is not suitable for these models. In contrast, dehumidifiers with manual/mechanical control (identifiable by a standard rotary switch) resume operation with unchanged settings, as before the power interruption (e.g., via timer or thermostat plug)."Important: Please read the enclosed operating instructions before commissioning, especially so that you can recognize in which mode the plug is located, i.e. whether it is supplying power at a higher or lower temperature than the set value.Shipping costs for 1 item: Fr. 10.- 2 year guarantee Technical data   Voltage: 220V-240V / 50HzPower consumption max: 16 A / 3680 WattDimensions (H/W/D):      11 x 6 x 5.7 (without power poles) cmWeight: 130 gr.Operational shutdown: precise input by key press / digital displaySelectable range: 5-30°CMeasurement accuracy: +/-1°CMessage interval: every 10 secondsAmbient temperature: -10°C ~ 70°C (does not correspond to the selectable setting)Swiss plug: Yes  Warranty: 2 years

Learn more More Fewer

The thermostat Master TH5 enables precise, temperature-dependent control of the heater Master B18EPR. Using a stepless rotary switch, the shut-off point of the heater can be set in the range of 0°C to +36°C. Without this thermostat, the heater would run continuously, with the option to choose between pure recirculation operation, 9kW or 18kW heating power. The TH5 is equipped with a 3-meter long cable and a suitable plug, allowing for straightforward installation. It can be plugged directly into the designated socket at the operator area on the back of the heater without any further adjustments required. Thus, the installation is extremely user-friendly and self-explanatory. However, it is important to note that the Master B18EPR is not suitable for operation in rooms with a temperature above 25°C. However, the use of the thermostat is possible without any issues if the temperature in another room is to be regulated and the heater itself is positioned outside of that room, for example, when the warm air is directed into the room to be heated via a hose.   Technical data  Contact Voltage / Current: 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 1 kg Control area 0 - 36°C Application Stepless rotary controlis plugged directly into the heater fan Cable length 3m Master Article no. 4150.109 Guarantee 2 years

Learn more More Fewer

Made of stainless steel, suitable for example for these indirect oil heaters from Master: • BV110• BV170• BV290E• BV490

Learn more More Fewer

The Master TH5 thermostat allows the Master B18EPR heater fan to be controlled based on temperature. Using a stepless rotary switch, the shut-off point of the heating can be adjusted in a range between 0° to +36°C. Without this thermostat, the heater operates continuously, optionally in pure recirculation mode, with 9kW or 18kW heating power.The TH5 comes with a 10m cable as well as the appropriate plug. It can be plugged directly into the operator area on the back of the heater in the designated socket without any further device adjustments. The connection is therefore very easy and self-explanatory.Please note that the Master B18EPR is not suitable for operation in rooms above 25°C. However, the use of the thermostat is straightforward if the temperature is to be maintained in another room and the heater itself is located outside, that is, when warm air is blown into the room to be heated via a hose.  Technical data  Contact voltage / current 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 2 kg control area 0 - 36°C Application Stepless rotary control is plugged directly into the heater fan Cable length 10m Master Article no. 4150.112 guarantee 2 years

Learn more More Fewer

Master Article No. 4013.245

Learn more More Fewer

Suitable for hose diameter Ø31 cm Master Article No. 4034.929

Learn more More Fewer

Suitable for hose diameter Ø41 cm Master Article No. 4034.895

Learn more More Fewer

Master Article 4514.650

Learn more More Fewer

Heat-resistant hot air hose, length 7.6 m. Made of black, heat-resistant nylon with integrated metal spiral.Suitable for these master heaters:directly applicable: • B18EPR• BL6800   on adapter ring: • BV77 to 2-way air distributor:• BV110 / BV170 / BV290 / BV400 / BV500• B30EPRto 4-way air distributor:• BV471Air Recirculation Kit: • BV110 / BV170   Technical data Length: 7.6mDiameter: 310mmOperating temperature: -10°C to +150°CWeight: 15 kgFlexibility: Highly flexible, angles of 180° or even circles in a small space are not a problem.Color: BlackMaster Article No. 4515.360

Learn more More Fewer

This heat-resistant hot air hose made of durable black nylon with an integrated metal spiral is the ideal solution for demanding hot air applications. To ensure safe and efficient installation, the use of the appropriate adapter ring is essential. This warm air hose has been specifically designed for compatibility with the Master heaters BV 110 and BV 170, thus enabling optimal performance and reliability in conjunction with these heating devices.Technical data Long 7.6m diameter 340mm Operating temperature -10°C to +150°C Weight 16 Kg flexibility Highly flexible, angles of 180° or even circles in a small space are not a problem. Color Black Master Article No. 4515.367

Learn more More Fewer

This heat-resistant hot air hose made of durable black nylon with an integrated metal spiral is the ideal solution for demanding hot air applications. To ensure safe and efficient installation, the use of the appropriate adapter ring is essential. This warm air hose has been specifically designed for compatibility with the following heating systems: the warm air discharge heater BV290 and the air return set for the models BV290 and BV400. It thus enables optimal performance and reliability in conjunction with these heating devices.Technical data Long 7.6m diameter 410mm Operating temperature -10°C to +150°C Weight 15 Kg flexibility Highly flexible, angles of 180° or even circles in a small space are no problem. Color Black Master Article No. 4515.361

Learn more More Fewer

Very high-quality, perforated spiral hose for distributing warm air in the room, for example for heating marquee tents or construction sites.The hose is 12m long and has a diameter of 30.5cm, with a zipper at both ends that allows the hose to be easily extended. On the underside, there are air outlet holes (diameter 4cm) so that the warm air is regularly distributed in the room.Metal eyelets on the top side allow the hose to be attached to the ceiling or wall. One end of the hose can be closed with a matching closure cap via a zipper (cap included in the delivery)."From our range, for example, can be combined with the heater Master B18EPR with the hose. To fix the hose to the heater, it is best to use a Briede (clamp)." Technical data  Length: 12 m Diameter: 30.5cm Operating temperature: -50°C to +150°C Weight: 4 kg depending on length Flexibility: Highly flexible, angles of 180° or even circles in a small space are not a problem. Color: black Material: Dura-Spiraflex PVC/Polyamide duct, reinforced with a continuous metal spiral, metal carrying loops every 2m (suitable for hanging the air distribution hose) Additional features: Compressible in a ratio of approximately 1 to 25 

Learn more More Fewer

2-way air distributor as an attachment to mobile oil heater BV290E.   Master Article 4034.911  2 x Ø31 cm

Learn more More Fewer