The UNI 2 is an electronic and universal triple measuring device to which a wide range of active electrodes can be connected, similar to the smaller model UNI1. Additionally, all construction moisture measuring electrodes that are based on the resistance measuring principle can be connected.
The following measurement ranges can be determined.
• building moisture
• Humidity
• Air temperature
• Material temperature
• Surface temperature
'The UNI2 alone cannot perform any measurements. It additionally requires the desired active electrodes (sensors), which must be connected to the measuring device. The following active electrodes can be connected:'
• B 50, B 60 and LB 70 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials.
• MB 35 for surface moisture measurement on concrete
• MH 34 for measuring high moisture values (40–200%) in softwood
• IR 40 EL for measuring surface temperature, thermal bridges, and dew point temperature
• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for measuring air humidity and air temperature and
• all Pt 100 temperature sensors.
"We usually have the B50 and B60 as well as RF-T 28, RH-T 37 flex in stock, but we can also order any other electrode for you at advantageous prices upon request. The delivery time is approximately 14 days from the order."
The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.
measuring ranges
building moisture:
in resistance-based measurements: (*)
0 - 80 Digits
0.3 - 25 wt.% or 0.3 - 12 cm.%
in capacitive measurements: (*)
0 - 199 Digits (Scan Area)
0.3 - 8.5 wt.% or 0.3 - 6.5 CM-% with B 50, B 60 and LB 70
2 - 8 wt.-% with MB 35 on concrete surfaces
when measuring the relative humidity in the borehole: (*)
5 - 98 % RH or
0.2 - 3.7 wt.% with RH-T 37 EL and RH-T 37 EL flex
(wood moisture):
40 - 200 % (atro) with MH 34 on softwood
Humidity:
5 - 98 % r.H. with RF-T 28, RH-T 37 EL and RH-T 37 EL flex
Temperature:
-200 - +600 °C depending on Pt 100 temperature sensor
Infrared measurement range:
-20 - +199.9 °C with IR 40 EL
(*) = Moisture conversion in % depending on building material via conversion table
The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.
Characteristics
• Handy quick moisture meter for lightning-fast single and series measurements
• Direct display of moisture values via the large LCD display, resolution: 0.1 digit
• Quick measurement of moisture in set building materials using resistance and capacitive high-frequency measurement methods.
• Precision in temperature measurement through Pt 100 measuring resistors in 4-wire technology
• Fully automatic device synchronization
scope of delivery
The package includes the base station Uni2 without any additional accessories.
The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.
Technical data
| Gann Article No.: | 30001550 |
| Device comparison: | Fully automatic |
Single or
series measurements: | in a matter of seconds
|
| Power supply: | 9-V-Block battery (included in delivery)
or Ni-Cd battery (special accessory) |
| Dimensions (L/W/H): | 140 x 90 x 42/50 mm |
| Weight: | 230 gr. |
| Guarantee: | 2 years |
