Hose connection coupling 3/4 inch, suitable for hose with 16mm inner diameter. Plastic version with rubber seal on the outside and sealing ring. Also compatible with most common hose systems. Technical dataInternal thread 3/4 inch Suitable for hose inner diameter 16mm

Learn more More Fewer

Hose connection coupling 3/4 inch brass, suitable for hose with 12mm inner diameter. 2-piece with rubber seal. Technical dataInternal thread 3/4 inch Suitable for hose inner diameter 12mm

Learn more More Fewer

Timer with or without 5m extension cableSimple, reliable timer individually or in a combination package with 5m white extension cable for controlling devices. Ideal if you want to operate a dehumidifier, for example, only during off-peak hours or at certain times.Please note that the connected device must resume operation with unchanged settings in order for timer control to be possible. In our product descriptions, it is mentioned whether a dehumidifier is suitable for operation with a timer.The timer can be very easily "programmed": there is a switch on the dial for every half hour, which can be pulled out and thus provides power to the device during that time. This makes it easy to set any desired time window, as well as multiple intervals throughout the day. The minimum operating time is therefore 30 minutes per day. With a side-mounted switch, the timer can also be deactivated, so that the plug always provides power.Fits standard household sockets. The socket of this timer has a child safety feature, the maximum load is 10A (2300W).  Technical data  Timer only: Mechanical Timer T12/T13 with switching option every 30 minutes, 24h cycle, child protection Housing white, switch gray Weight 110 gr Timer with 5m extension cable Td extension 3x1 white 5m T12/T13 Mechanical Timer T12/T13 with switching option every 30 minutes, 24h cycle, child protection with timer mech. 24h Housing white, switch black/red Total weight 580 g test mark THERE IS guarantee 2 years

Learn more More Fewer

90° Brass Coupling 3/4-Inch Female Thread Suitable for 12mm Hose Inner Diameter• 2-part• Internal thread• rubber seal• max. operating pressure for water is 16 bar Technical dataWeight: 0.03kg

Learn more More Fewer

90° angle coupling made of plastic with 3/4-inch internal thread suitable for 12-13mm hose inner diameter- 2 parts- internal thread- rubber seal   Technical dataSuitable for 12-13mm hose inner diameter

Learn more More Fewer

Timer with or without 5m extension cableSimple, reliable timer individually or in a combination package with 5m white extension cable for controlling devices. Ideal if you want to operate a dehumidifier, for example, only during off-peak hours or at certain times.Please note that the connected device must resume operation with unchanged settings in order for timer control to be possible. In our product descriptions, it is mentioned whether a dehumidifier is suitable for operation with a timer.The timer can be very easily "programmed": there is a switch on the dial for every half hour that can be pulled out, thereby supplying power to the device during that time. This makes it easy to set any desired time window, as well as multiple intervals throughout the day. The minimum operating time is thus 30 minutes per day. With a switch mounted on the side, the timer can also be deactivated, so that the plug always supplies power.Fits standard household sockets. The socket of this timer has a child safety feature, the maximum load is 10A (2300W).Technical data Timer only: Mechanical Timer T12/T13 with switching option every 30 minutes,24h cycle, child protectionHousing white, switch grayWeight 110 gr Timer with 5m extension cable Td-extension 3x1 white 5m T12/T13Mechanical Timer T12/T13 with switching option every 30 minutes,24h cycle, child protection with timer mech. 24hHousing white, switch black/redTotal weight 580 gTest mark: CEWarranty: 2 years

Learn more More Fewer

This adapter fits the Trotec TTK171 Eco construction dryer. A air hose can be attached to it, which directs the blown dry air precisely to damp areas, such as cavities under bathtubs, gaps in walls, suspended ceilings, etc.. The TTK171 Eco has a very powerful radial fan with 3.2 MPa, making it suitable for drying with air hoses. The appropriate guide rails for the air outlet are already standard on the side of the housing, allowing the adapter to be easily inserted. The suitable hose has a diameter of 160 mm and is also available from us.  

Learn more More Fewer

HEPA filter, suitable for dehumidifier Dryfix Royal24. This filter is inserted at the back of the dehumidifier behind the standard filter frame into the designated recess.Hepa filters clean the air of fine dust, pollen, viruses, and bacteria with a purity rate of over 99.9%.'This filter is part of the consumables and cannot be washed. It is only suitable for the dehumidifier "Dryfix Royal24".'Sold individually. Technical dataDimensions: 215 x 225 x 20mmwith two tabs for easier removal 

Learn more More Fewer

Replacement HEPA filter, suitable for the dehumidifier Quadro Q40 + X40. It cleans the air with a purity rate of nearly 100% with every pass through the device. This means that fine particles such as pollen, fine dust, mold spores, as well as viruses and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that flying pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed.The filter is clicked into place at the back of the dehumidifier in the air intake area. It replaces the standard filter of the device.The filter in this offer is a replacement filter. without the mounting frame required for the application. Therefore, for the initial equipment, you will also need the mounting according to the offer further down this page (complete Fr. 38.-).This filter only fits the Quadro Q40 + X40. The filter of the Quadro Q80 + X80 is larger and does not fit the Q40 + X40.   Technical dataWeight: 0.3kgDimensions (H x W x D): 19.5 x 31.5 x 3.7 cm

Learn more More Fewer

This HEPA filter is compatible with the dehumidifier Quadro Q80 + X80 and cleans the air with an almost 100% purity rate with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that airborne pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed."It can be easily clicked into place on the back of the dehumidifier at the air intake area. It replaces the standard filter of the device."As original equipment, you need the complete filter including the mounting frame (CHF 38.-), for replacement filters it is sufficient to order only the HEPA filter itself without the frame (CHF 29.-).This filter only fits the Quadro Q80 + X80. The filter for the Quadro Q40 + X40 is smaller and does not fit the Q80 + X80.  Technical dataWeight: 0.3kgDimensions (H x W x D): 30.5 x 31.5 x 3.7 cm

Learn more More Fewer

This HEPA filter is compatible with the dehumidifier Quadro Q40 + X40. It cleans the air with a purity rate of nearly 100% with every pass through the device. This means that fine particles such as pollen, fine dust, mold spores, as well as viruses and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that flying pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed."It can be easily clicked into place on the back of the dehumidifier at the air intake area. It replaces the standard filter of the device."As original equipment, you need the complete filter including the mounting frame. For replacement filters, it is sufficient to order only the HEPA filter itself without the frame (further down this page (Fr. 29.-).This filter only fits the Quadro Q40 + X40. The filter of the Quadro Q80 + X80 is larger and does not fit the Q40 + X40.   Technical dataWeight: 0.3kgDimensions (H x W x D): 19.5 x 31.5 x 3.7 cm

Learn more More Fewer

This HEPA filter is compatible with the dehumidifier Quadro Q80 + X80 and cleans the air with an almost 100% purity rate with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that airborne pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed."It can be easily clicked into place on the back of the dehumidifier at the air intake area. It replaces the standard filter of the device."As original equipment, you need the complete filter including the mounting frame (CHF 38.-), for replacement filters it is sufficient to order only the HEPA filter itself without the frame (CHF 29.-).This filter only fits the Quadro Q80 + X80. The filter for the Quadro Q40 + X40 is smaller and does not fit the Q80 + X80. Technical dataWeight: 0.3kgDimensions (H x W x D): 30.5 x 31.5 x 3.7 cm 

Learn more More Fewer

The water pump is suitable for mobile dehumidifiers. It is placed directly in the bucket of the dehumidifying devices and fixed to the bottom of the bucket using suction cups. When the water level in the bucket rises, a float is activated and the water is pumped out. The maximum lift height is 3 m, making it easy to reach, for example, a sink, as well as a higher basement window.    Suitable application   The pump is 5.2 cm wide. Therefore, the bucket of the dryer must have at least this width to accommodate the pump. It is connected via an adapter to a standard household outlet. With closed dehumidifiers, cables and hoses are usually routed out of the housing through the hose connection, while with devices with an open bucket, it is very easy to route them directly over the edge of the bucket.  The pump is suitable for condensate water, but not for dirty water. The hose for draining the condensate water has an inner diameter of 8 mm (outer diameter 11 mm). The delivery includes approximately 2.90 m of hose.conveying capacityThe pumping capacity is a maximum of 450 liters per hour, depending on the pumping height, which is several times what the dehumidifier is capable of extracting from the air:   At 0 m height 450 liters per hourAt 2 m height 220 liters per hour     Power consumption The consumption is very low: most of the time the pump is on standby until a certain water level has accumulated in the bucket. Once the level is reached, the pumping process is initiated. This only consumes 8 watts and is practically silent. A good and affordable solution, for example, when the dehumidifier should operate continuously during the holiday season, but also when you don't want to constantly think about emptying the bucket.   scope of delivery • Pump with power supply (adapter with 2-pole plug)• approx. 2.90 m hose (8 mm inner diameter)• multilingual operating instructions  Technical data   Consumption: max. 8 W (only during periodic pumping process)Standby consumption: 0Weight: 0.280 kgDimensions (H/W/D): 7.5 x 5.2 x 7.3 cmWarranty: 2 years     "From our range, for example, these dryers are suitable for this device:"   • E33 / Sonora33• all Lübra LDH626L and WDH101 models• all Oasis dryers• all Woods DS and TDR models• all Krüger Airsec models 75 / 125 / 165 / 265 + Airsec3000 • Acto521• Krüger Airsec 3 • Dryfix Royal 12, Royal 20 • WDH-416S, WDH-35B • TTK 125 S, 170 S, 350 S • Aerial AD 520, 540, 560, 580, 660, 680 • AD432F, AD432R For the other models, it may be necessary to create a cutout in the upper area of the bucket, through which the hose and cable are routed, or the water must be directed into a bucket through the existing hose connection, in which the pump is placed.If you are not sure whether your dehumidifier is suitable for use with this condensate pump, feel free to ask us. We are familiar with most dehumidifiers on the market and their buckets.

Learn more More Fewer

This air hose is compatible, among other things, with the adapter for the construction dryer TTK171Eco. Due to its lightweight, it is easy to handle and transport. With a high bending radius of 1 x diameter, it is extremely flexible and versatile. Its specially coated PVC jacket is abrasion-resistant and difficult to ignite.  Technical data • Temperature -5 °C to +80 °C• Standard length 6 m• Bending radius 1 x diameter• Inner diameter 160 mm• PVC-coated polyamide fabric• vibration-resistant and difficult to ignite• Reinforcement by concealed spring steel spiral• wavy inside and outside• hochflexibel• Color gray

Learn more More Fewer

With the Eberle RTR-E3311 thermostat plug, you can easily and quickly regulate fan heaters, heating stoves, and electric heaters up to a maximum of 2300W (10 Amperes). The thermostat is plugged into the socket, and the heater can also be plugged in on the other side of the plug without any installation or tools.The temperature sensor / controller is connected with a cable and can be used exposed or mounted on the wall.   Technical data  Voltage: 230V / 50HzContact voltage / current: 230V / 10 ADimensions (H/W/D): 75 x 75 x 2.5 cmWeight: 390 grOperating mode: Rotary knob / Switch: Power On/OffMeasurement accuracy: +/- 5%Measuring interval: every 10 secondsAmbient temperature: 5°C ~ 30°C (0.5°C resolution)Night lowering: Yes (5C° above external timer)Protection class: IP30, protection isolatedSwiss plug: YesWarranty: 2 years

Learn more More Fewer

This room hygrometer is suitable for humidity-dependent control of the TTK170ECO or other dehumidifiers with a 6.35 mm jack for external connection, for example for unattended drying processes where a target humidity must not be undershot (for instance, with fresh plaster or plastering work) or to reduce power consumption when a too low humidity is not necessary.    The HG 110 features a 6.35 mm jack plug, operates in the low voltage range, and is designed for a maximum load of 2 A. The three-meter long cable allows the measurement point to be different from the location of the dehumidifier.     application examples   It serves as a two-point controller for regulating relative humidity, for example, on indoor construction sites, in basements, in climate cabinets, or for controlled dehumidification of office and computer rooms. Other areas of application include storage for goods or food, cold storage for fruits and vegetables, greenhouses of horticultural businesses, textile industry, paper and printing industry, film industry, hospitals. Wherever humidity needs to be regulated or monitored, this humidity controller with the corresponding dehumidifier can be used.      Functionality and Installation Location   The installation location should be chosen in such a way that a representative measurement of humidity is ensured, i.e., the humidity measurement values at the installation location should correspond to those of the room, and the hygrometer should be in the airflow. The room hygrometer reacts quickly and accurately to changes in humidity. By adjusting the setpoint knob, the lever system is engaged in such a way that when the set humidity is reached, the internal microswitch is activated.     Technical data   Measuring range 40 - 90 % relative humidity Measurement accuracy +-3% suitable ambient temperature 0 - 60° C suitable ambient humidity 40 - 90 % Tension 24 V max. switching load 2 A Cable length 3 Meters connector 6.35 mm jack 1/4" Protection class IP20 guarantee 2 years

Learn more More Fewer

The condensate pump "Apollo Silence MD600PSW" is very quiet and is suitable for air conditioning systems and wall-mounted dehumidifiers. It can be mounted on the wall with the included cover, but can also be used freestanding.Many things make the "Apollo" unique:Low consumptionThe pump is only activated when there is enough water collected in the integrated catch basin. At just under 6W, the pump is unbeatable in terms of energy efficiency. No standby consumption.   Constant power outputOther pumps lose delivery capacity the higher the water is pumped away. The "Apollo" is technically designed so that the performance remains constant at 14 liters per hour up to a height of 6m.   Quiet operationThe "Apollo" is the quietest pump of its class on the market. The operating noise during the pumping process is hardly noticeable. It is therefore ideally suited for quiet areas such as libraries, bedrooms, or offices.   Small in dimensions"Apollo" is also small and narrow in its dimensions. Wall-mounted, it only protrudes 9 cm into the room, including the cover.  The pump is suitable for condensate, but not for dirty water. The water can be supplied to the pump through an inlet hole and is pumped away through a thinner hose with an inner diameter of 8mm (not included) up to a maximum height of 6 m.conveying capacityconstant 14 liters per hour up to 6m heightThe catch basin is equipped with a float that only activates the device when water has accumulated. The pump can therefore be used even when water is not continuously flowing in. It has a cable with a three-pole Swiss plug (230V) and is ready for immediate use in independent operation. A check valve prevents residual water from flowing back from the outgoing hose into the pump, keeping it occupied more than necessary.  Technical data   consumption max. 6 W (only during periodic pumping process, no standby consumption) conveying capacity at 0 m height: 14 liters per hour at 2 m height: 14 liters per hour at 4 m height: 14 liters per hour at 6 m height: 14 liters per hour Capacity Catchment Tray 0.6 Liter Weight 1 kg Dimensions (H x W x D) 127 x 170 x 81 mm without cover 141 x 222 x 98 mm with cover Ambient temperature 1°C to 50°C Overheating protection at 130°C guarantee 2 years

Learn more More Fewer

This very reliable and powerful pump with a check valve can be used freestanding or directly built into the device. Additionally, wall mounting of the pump is possible, as there are two brackets on the back with which the pump can be attached to two screws on the wall.   The pump is suitable for condensate water, but not for dirty water. The water can be supplied to the pump via a maximum of 3 inlets and is pumped away through a thin 3/8-inch (10 mm) connection via a hose up to a maximum height of 4 meters (the hose is not included in the delivery). The pump comes with a cable with a three-pole Swiss plug (230V).   The check valve of the pump prevents the backflow of water from the outgoing hose. The condensate pump has a float that only activates the device when water has accumulated. It can therefore also be used when water is not continuously flowing in. There is also the possibility to connect the pump to the electrical circuit of a dehumidifier (construction dryer), so that the dehumidifier would turn off in the event of a pump failure (these works must be carried out by an electrician).     Examples of funding performance At 0 m height: 360 liters per hourAt 2 m height: 240 liters per hourAt 4 m height: 192 liters per hour     Characteristics   • Check valve• Three (3) inlet openings• Easy installation• Overheat protection• Very quiet operating mode• Stossfester Tank• Compact design   Technical data  Voltage 220 - 240 V/50 Hz Power consumption 85 W (only during pumping process, otherwise no standby consumption) cable + plug Connection cable with Swiss plug T12 Masse H x B x L 185 x 135 x 285 mm Ambient temperature +1 °C to +50 °C Overheating protection at 130 °C Tank capacity  1.8 Liter flow rate depending on the funding amount max. 360 liters / hour guarantee 2 years

Learn more More Fewer

This condensate pump is suitable for the following Trotec dehumidifiers: • TTK125S• TTK175S• TTK355S• TTK655S• TKK500• TTK900MP The pump is inserted into the dehumidifier instead of the bucket and connected directly to the existing socket in the device. Compared to a standalone pump, this system has the advantage that, on the one hand, no additional power socket is required, and on the other hand, that the pump and dryer work together. This means that in the event of a pump failure, the dehumidifier also stops. The system is also suitable for unattended continuous operation. The delivery includes a connected 5 m drain hose, which can also be extended with a suitable adapter.  Trotec Article No. 6.100.003.030  

Learn more More Fewer

This pumping kit has been specially designed for our construction dryers of the AD432R, AD432F, and DHP25 series. It is designed to be hung directly in the condensate water bucket of the devices with a metal bracket. This allows for spontaneous decisions depending on local conditions, whether the water should be collected in the bucket or pumped out directly via a hose.The power supply is provided by the supply plug, which is located directly behind the bucket in the housing of all dehumidifiers of the new series AD432R + AD432F and DHP with refrigerant R290. (Important: older models AD432F with refrigerant R134a do not yet have this connection.)The pump used in this kit is the quality product "Eckerle EE400", a quiet centrifugal pump with a high flow rate. Overview of flow rates in liters at different delivery heights: Funding amount Funding performance0 m max. 350 liters / hour.1 m max. 280 liters / hour.2 m  max. 220 liters / hour.3 m max. 100 liters / hour. Characteristics:• Lifting height up to 3.5 m • Quiet operation• Ball bearing drive shaft• Integrated check valve (prevents backflow of hose contents into the pump)• Overflow safety switchThe condensate pump is equipped with a level float that initiates the pumping process at a certain fill level.The hose leading away from the pump has an inner diameter of 8mm. A piece of 3m length is included in the delivery. You can order larger lengths from us if you wish.Eckerle condensate pumps are designed for the transport of condensate from air conditioning systems, refrigeration units, dehumidifiers, gas and oil condensing appliances. The housing is made of ABS, making it chemically (up to pH 3) and thermally (up to 70°C) resistant to acidic condensate. Technical dataModel: Eckerle EE400Voltage: 230V - 50/60Hz, 65VAInput: 65WWeight: 2.5 kgCheck valve: Yes

Learn more More Fewer

This condensate pump offers a practical and reliable solution for draining condensate from dehumidifiers. It is magnetically fixed in the empty space that is created after removing the condensate container. The condensate generated is directed from the drip tray of the dehumidifier directly into the pump via a hose piece with coupling included in the delivery. As soon as a certain level is reached in the pump, a float automatically activates the pumping process. The water is then discharged through a 7-meter long hose, which is also included in the delivery, allowing for drainage to a distance or up to a height of 3.5 meters. If the length of 7 meters is not sufficient, the hose can easily be extended or replaced with a longer piece, which is available as an accessory.The pump is equipped with a connection cable with an Amphenol connector, which can be directly connected to the socket prepared in the dehumidifier. Examples of funding performance (depending on the funding amount):250 liters per hour at 1 m height210 liters per hour at 2 m height125 liters per hour at 3 m height50 liters per hour 4 m height Equipped with an alarm to block the dehumidifier in case of pump malfunctions, as well as with a check valve at the water outlet, so that any water present in the hose cannot flow back into the pump.The pump is suitable for condensate, but not for dirty water. Technical data Tension 230V / 50Hz Power consumption during pumping process 20W check valve and Head max. 3.5m Protection class Amphenol connector   IP66 Dimensions (L x W x H) 25 x 11 x 18 cm Guarantee 2 years

Learn more More Fewer