These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

The AD20 is a robustly built condensation dryer. It is lightweight, portable, and can be carried like a suitcase. Thanks to the BlueDry technology, the AD20 reliably dehumidifies even at low humidity and temperature. Another advantage is the built-in automatic condensate pump with overflow protection (pumping height up to 4 meters). Latest technology with environmentally friendly refrigerant R1234yf.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Robust housing made of impact-resistant plastic. It is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used to connect additional devices.Features and Benefits• Housing: made of robust, impact-resistant, and UV-resistant plastic, lightweight at only 16.4 kg. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Automatic water pump with overflow protection integrated as standard.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other.  Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 18.0 liters / 24h (Power consumption: 350 W)27°C / 60% r.H. = 11.0 liters / 24h (Power consumption: 310 W)20°C / 60% r.H. = 9.0 liters / 24h (Power consumption: 260 W)10°C / 70% r.H. = 5.0 Liters / 24h (Power consumption: 215 W)(r.H.=relative humidity)        Technical data  Tension: 230V / 50Hz Power consumption:  max. 350W Sound pressure level:  1 m distance 54 dB(A) 2.5 m distance 51 dB(A) 3 m distance 50 dB(A) Dehumidification capacity: max. 18.0 liters / day (30°C / 80% r.H) bucket / pump No bucket. Integrated pump with overflow protection, 4 m delivery height. Recirculation air volume level 1/2 200 / 270 m³/h refrigerant:   R1234yf Dimensions (H/W/D):      420 / 320 / 500 mm Weight:    16.4 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 50 m² Swiss plug:  Yes   Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The AD40 is versatile and so lightweight that it can be carried like a suitcase. Thanks to the BlueDry® technology, the AD40 dehumidifies consistently and reliably even at low humidity and temperature.serviceThe operation is simple and is carried out via the innovative eDRY® electronics. All control elements are clearly arranged, and all important operating states are accessible at any time. The display shows the target and actual humidity. Operating hours (consumption) can be easily read. The energy consumption is displayed via the additional calibrated energy meter. The control is equipped with a memory function. This means that in the event of a power failure, for example on construction sites, the operation will resume with unchanged settings as soon as the power supply returns.Water bucket or optional pumpThe water collection container (6.8 liters) is easy to remove, carry, and empty. It is located inside, with the water level of the bucket measured by a float. When full, it automatically interrupts operation, and operation automatically restarts when the bucket is replaced. An optional matching pump kit is available, which is versatile and suitable for unattended continuous operation.Robust housingThe housing is easy to clean and can be easily disassembled for any necessary service work. It features a foldable handle. Tie-down straps can be attached on the sides. The secured socket is used for connecting additional devices. Four robust, stable plastic feet for floor placement. Stackable with other Aerial Aercube devices.Characteristics  • Case: made of robust, impact-resistant, and UV-resistant plastic, lightweight. Fixed points for AERCUBE® lashing system. • Cable: integrated cable winder.• Setup: freestanding or mounted on Aercube system (fixation points for AERCUBE lashing system).• Airflow: cross, lateral intake and exhaust.• Air filter: Protects the device from dust.• Fan: 2-stage, energy-efficient EC fan.• Defrosting: Demand-controlled hot gas defrosting.• Condensate pump: Optional pump kit available.• Blue-Dry Technology: For particularly energy-saving operation – even at low humidity and temperatures.• Calibrated energy meter (MID compliant).• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer. • Hot gas defrosting: Thanks to automatic self-defrosting, it can also be used in cooler environments.• Suitable for unattended continuous operation.• Custom design: available in all colors and with your logo for larger quantities. All AERCUBE system components are 100% compatible and stackable with each other. Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H = 35.0 Liters / 24h (Power consumption: 520W) 27°C / 60% r.H. = 22.0 Liters / 24h (Power consumption: 430W) 20°C / 60% r.H. = 15.0Liters / 24h (Power consumption: 370W) 10°C / 70% r.H. = 8.0 Liters / 24h (Power consumption: 300W)(r.H.=relative humidity)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 530W Sound pressure level:  1 m distance 57 dB(A) 2.5 m distance 54 dB(A) 3 m distance 53 dB(A) Dehumidification capacity: max. 35.0 liters / day (30°C / 80% r.H) Bucket: Capacity 6.8 liters, Operational interruption due to swimmer Recirculation air volume level 1 / 2: 300 / 400 m³/h refrigerant:   R407C Dimensions (H/W/D):      580 / 390 / 450 mm Weight:    25 Kg Business closure: Digital Ambient temperature: +1°C - +34°C Application area: up to approx. 100 m² Swiss plug:  Yes   hose connection:  Connection fitting for direct hose connection Optional Pump Kit Operating hour meter: Yes Guarantee: 2 years Documents / Downloads   User Manual German

Learn more More Fewer

A powerful dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. It features a housing made of impact-resistant plastic, two large wheels, and a foldable handle for easy movement on the floor and even up stairs.   The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Motor with winding protection.• Compressor: Fully hermetic rotary piston compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with attached aluminum fins• Self-defrosting: automatic hot gas defrost controlled by DryLogic, thus usable down to the freezing point.• Collection container: 6.8 liters with automatic full level shut-off• Hose connection: Socket (15 mm) for direct condensate drainage. Pump optionally available.• Hygrostat: digital with hygrostat rotary knob• Operating Hour Meter• Consumption meter kWh: calibrated, can be read without power• 2 large transport wheels: for easy mobility on construction and damage sites• Memory Function: After a power interruption, it resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Suitable for unattended continuous operation.Aerial "eDRY®" for efficient air dehumidification"A prerequisite for an economical operation and reduced energy consumption is the optimal coordination of the components and the use of advanced measurement and control technology. With the development of "eDRY", Aerial was able to further improve the user-friendliness and energy efficiency of the AD series. The use of digital precision sensors in conjunction with the eDRY electronics enables very accurate measurement and control of the room humidity."    dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +34°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions: at 30°C / 80% r.H. = 37.0 liters / day (Power consumption: 520 W)at 27°C / 60 % r.H. = 23.0 liters / day (Power consumption: 430 W)at 20°C / 60% r.H. = 16.5 liters / day (Power consumption: 390 W)at 10°C / 70% r.H. = 8.0 liters / day (Power consumption: 320 W)   Technical data   Tension: 230V / 50Hz Power consumption:  max. 520 W (10A) / 390W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 51 dB(A) (manufacturer's specification) Dehumidification capacity: max. 37 liters/day (30°C / 80% r.H.)  Recirculation air volume level 1/2: 450 / 550 m³/h condensate tank: approx. 6.8 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H / W / D):      690 x 390 x 470 mm Weight:    32 Kg Business closure: Digital Operator Panel Ambient temperature: 1°C ~ 34°C (35 - 99% r.H.) Application area: up to 100m² / 300m³ Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer

The Aerial AD 750 is a very powerful, robustly built dehumidifier for construction sites and industry. The strong blower provides a wide-area exchange of moist and dry air. The AD750 features a robust housing made of impact-resistant plastic, stable guide rails, and side wheels for easy mobility on the floor. The dryer can even be pulled over stairs with these wheels. However, when used as a construction site dehumidifier, attention should be paid to the weight; 2 people are required for relocating it between floors or construction scaffolding.The intake of moist air is at the back via easily removable air filters. The dry air is blown out at the front through slanted slats.Characteristics• Fan: Axial fan with aluminum impeller. Fan motor with winding protection.• Compressor: Fully hermetic rotary vane compressor, protected against overload, mounted with vibration damping.• Condenser/Evaporator: made of copper pipes with aluminum fins. Refrigeration circuit made of copper pipe with capillary tube and filter drier. Service connection on the suction side.• Self-defrosting: Automatic hot gas defrost controlled by DryLogic.• Collection container: 12 liters, with automatic full level shut-off.• Hose connection: Fitting (15 mm) for direct condensate drainage.• Hygrostat: Hygrostat rotary knob• operating hour meter• 2 large transport wheels: good mobility thanks to 2 large transport wheels, ergonomically shaped housing.• Stackable  designsThere are two versions of the AD750: with a bucket without a pump or with a pump without a bucket. Please select the desired model. dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +32°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions: at 30°C / 80% r.H. = 55.0 liters / day (power consumption: 900 W)at 27°C / 60 % r.H. = 34.1 Liters / Day (Power consumption: 780 W)at 20°C / 60% r.H. = 24.5 liters / day (power consumption: 660 W)at 10°C / 70% r.H. = 14.0 Liters / Day (Power consumption: 560 W)   Technical data Tension: 230V / 50Hz Power consumption:  max. 900W (10A) / 660W (at 20°C/60% r.H.) Sound pressure level:  2.5 m distance 53 dB(A) (manufacturer's specification) Dehumidification capacity: 55 liters/day (30°C / 80% r.H.)  air circulation volume: 710 m³/h (measurement installed) condensate tank: approx. 12 liters Compressor:     Rotary compressor  refrigerant:   R407c (550gr.) Dimensions (H/W/D):      88 x 52 x 49.5 cm Weight:    42 Kg Business closure: Hygrostatrad Ambient temperature: 3°C ~ 32°C (40 - 95% r.H.) Application area: up to 600m³ (temperature-controlled rooms) resp. 400m³ (unheated) Swiss plug:  Yes   hose connection:  Yes Operating hour meter: Yes Guarantee: 2 years

Learn more More Fewer